summaryrefslogtreecommitdiffstats
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni3-6/+11
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-20flow_dissector: Add number of vlan tags dissectorBoris Sukholitko1-0/+9
Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet. For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags. This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet. The goal is to make the following TC commands possible: tc filter add dev eth1 ingress flower \ num_of_vlans 1 vlan_prio 5 action drop From our logs, we have redirect rules such that: tc filter add dev $GPON ingress flower num_of_vlans $N \ action mirred egress redirect dev $DEV where N can range from 0 to 3 and $DEV is the function of $N. Also there are rules setting skb mark based on the number of vlans: tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \ $P action skbedit mark $M This new dissector allows extracting the number of vlan tags existing in the packet. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-19net: sched: support hash selecting tx queueTonghao Zhang1-0/+1
This patch allows users to pick queue_mapping, range from A to B. Then we can load balance packets from A to B tx queue. The range is an unsigned 16bit value in decimal format. $ tc filter ... action skbedit queue_mapping skbhash A B "skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit") is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | qn | qm v v v HTB/FQ FIFO ... FIFO For example: If P1 sends out packets to different Pods on other host, and we want distribute flows from qn - qm. Then we can use skb->hash as hash. setup commands: $ NETDEV=eth0 $ ip netns add n1 $ ip link add ipv1 link $NETDEV type ipvlan mode l2 $ ip link set ipv1 netns n1 $ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up $ tc qdisc add dev $NETDEV clsact $ tc filter add dev $NETDEV egress protocol ip prio 1 \ flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6 $ tc qdisc add dev $NETDEV handle 1: root mq $ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb $ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit $ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit $ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1 $ tc qdisc add dev $NETDEV parent 1:3 pfifo $ tc qdisc add dev $NETDEV parent 1:4 pfifo $ tc qdisc add dev $NETDEV parent 1:5 pfifo $ tc qdisc add dev $NETDEV parent 1:6 pfifo $ tc qdisc add dev $NETDEV parent 1:7 pfifo $ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10 pick txqueue from 2 - 6: $ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes tx_queue_0_bytes: 42 tx_queue_1_bytes: 0 tx_queue_2_bytes: 11442586444 tx_queue_3_bytes: 7383615334 tx_queue_4_bytes: 3981365579 tx_queue_5_bytes: 3983235051 tx_queue_6_bytes: 6706236461 tx_queue_7_bytes: 42 tx_queue_8_bytes: 0 tx_queue_9_bytes: 0 txqueues 2 - 6 are mapped to classid 1:3 - 1:7 $ tc -s class show dev $NETDEV ... class mq 1:3 root leaf 8002: Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:4 root leaf 8003: Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:5 root leaf 8004: Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:6 root leaf 8005: Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:7 root leaf 8006: Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-18devlink: add port to line card relationship setJiri Pirko1-0/+3
In order to properly inform user about relationship between port and line card, introduce a driver API to set line card for a port. Use this information to extend port devlink netlink message by line card index and also include the line card index into phys_port_name and by that into a netdevice name. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko1-0/+2
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card provisioningJiri Pirko1-2/+41
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: add support to create line card and expose to userJiri Pirko1-0/+4
Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15ipv6: make ip6_rt_gc_expire an atomic_tEric Dumazet1-2/+2
Reads and Writes to ip6_rt_gc_expire always have been racy, as syzbot reported lately [1] There is a possible risk of under-flow, leading to unexpected high value passed to fib6_run_gc(), although I have not observed this in the field. Hosts hitting ip6_dst_gc() very hard are under pretty bad state anyway. [1] BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 value changed: 0x00000bb3 -> 0x00000ba9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15net: Handle l3mdev in ip_tunnel_init_flowDavid Ahern1-2/+9
Ido reported that the commit referenced in the Fixes tag broke a gre use case with dummy devices. Add a check to ip_tunnel_init_flow to see if the oif is an l3mdev port and if so set the oif to 0 to avoid the oif comparison in fib_lookup_good_nhc. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15Merge branch 'master' of ↵David S. Miller1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-04-14 1) Fix the output interface for VRF cases in xfrm_dst_lookup. From David Ahern. 2) Fix write out of bounds by doing COW on esp output when the packet size is larger than a page. From Sabrina Dubroca. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: page_pool: introduce ethtool statsLorenzo Bianconi1-0/+21
Introduce page_pool APIs to report stats through ethtool and reduce duplicated code in each driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-0/+2
2022-04-13net: rtnetlink: add bulk delete support flagNikolay Aleksandrov1-1/+2
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to verify that the delete operation allows bulk object deletion. Also emit a warning if anyone tries to set it for non-delete kind. Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: use BIT for flag valuesNikolay Aleksandrov1-1/+1
Use BIT to define flag values. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add helper to extract msg type's kindNikolay Aleksandrov1-0/+6
Add a helper which extracts the msg type's kind using the kind mask (0x3). Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add msg kind namesNikolay Aleksandrov1-0/+7
Add rtnl kind names instead of using raw values. We'll need to check for DEL kind later to validate bulk flag support. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13esp: limit skb_page_frag_refill use to a single pageSabrina Dubroca1-2/+0
Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch. This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len). Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-04-12net: remove noblock parameter from recvmsg() entitiesOliver Hartkopp6-10/+9
The internal recvmsg() functions have two parameters 'flags' and 'noblock' that were merged inside skb_recv_datagram(). As a follow up patch to commit f4b41f062c42 ("net: remove noblock parameter from skb_recv_datagram()") this patch removes the separate 'noblock' parameter for recvmsg(). Analogue to the referenced patch for skb_recv_datagram() the 'flags' and 'noblock' parameters are unnecessarily split up with e.g. err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); or in err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg, sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); instead of simply using only flags all the time and check for MSG_DONTWAIT where needed (to preserve for the formerly separated no(n)block condition). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11ipv4: Use dscp_t in struct fib_entry_notifier_infoGuillaume Nault1-1/+1
Use the new dscp_t type to replace the tos field of struct fib_entry_notifier_info. This ensures ECN bits are ignored and makes it compatible with the dscp field of struct fib_rt_info. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11ipv4: Use dscp_t in struct fib_rt_infoGuillaume Nault1-1/+1
Use the new dscp_t type to replace the tos field of struct fib_rt_info. This ensures ECN bits are ignored and makes it compatible with the fa_dscp field of struct fib_alias. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-22/+58
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: introduce BSS color collision detectionLorenzo Bianconi1-0/+4
Add ieee80211_rx_check_bss_color_collision routine in order to introduce BSS color collision detection in mac80211 if it is not supported in HW/FW (e.g. for mt7915 chipset). Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify BSS color collision detection is supported in HW/FW. Set this for ath11k which apparently didn't need this code. Tested-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org [clarify commit message a bit, move flag to mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: Improve confusing comment around tx_info clearingToke Høiland-Jørgensen1-3/+3
The comment above the ieee80211_tx_info_clear_status() helper was somewhat confusing as to which fields it was or wasn't clearing. So replace it by something that is hopefully more, well, clear. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220404210108.2684907-1-toke@toke.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller1-2/+6
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Replace unnecessary list_for_each_entry_continue() in nf_tables, from Jakob Koschel. 2) Add struct nf_conntrack_net_ecache to conntrack event cache and use it, from Florian Westphal. 3) Refactor ctnetlink_dump_list(), also from Florian. 4) Bump module reference counter on cttimeout object addition/removal, from Florian. 5) Consolidate nf_log MAC printer, from Phil Sutter. 6) Add basic logging support for unknown ethertype, from Phil Sutter. 7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil. 8) Replace hardcode value in nft_bitwise, from Jeremy Sowden. 9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names, also from Jeremy. 10) nft_fib support for reverse path filtering with policy-based routing on iif. Extend selftests to cover for this new usecase, from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: icmp: add skb drop reasons to icmp protocolMenglong Dong1-1/+1
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with kfree_skb_reason(). In order to get the reasons of the skb drops after icmp message handle, we change the return type of 'handler()' in 'struct icmp_control' from 'bool' to 'enum skb_drop_reason'. This may change its original intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means success now. Therefore, all 'handler' and the call of them need to be handled. Following 'handler' functions are involved: icmp_unreach() icmp_redirect() icmp_echo() icmp_timestamp() icmp_discard() And following new drop reasons are added: SKB_DROP_REASON_ICMP_CSUM SKB_DROP_REASON_INVALID_PROTO The reason 'INVALID_PROTO' is introduced for the case that the packet doesn't follow rfc 1122 and is dropped. This is not a common case, and I believe we can locate the problem from the data in the packet. For now, this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types. Maybe there should be a document file for these reasons. For example, list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO' drop reason. Therefore, users can locate their problems according to the document. Reviewed-by: Hao Peng <flyingpeng@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: sock: introduce sock_queue_rcv_skb_reason()Menglong Dong1-1/+8
In order to report the reasons of skb drops in 'sock_queue_rcv_skb()', introduce the function 'sock_queue_rcv_skb_reason()'. As the return value of 'sock_queue_rcv_skb()' is used as the error code, we can't make it as drop reason and have to pass extra output argument. 'sock_queue_rcv_skb()' is used in many places, so we can't change it directly. Introduce the new function 'sock_queue_rcv_skb_reason()' and make 'sock_queue_rcv_skb()' an inline call to it. Reviewed-by: Hao Peng <flyingpeng@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-10tls: rx: simplify async waitJakub Kicinski1-1/+0
Since we are protected from async completions by decrypt_compl_lock we can drop the async_notify and reinit the completion before we start waiting. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08net/sched: act_skbedit: Add extack messages for offload failureIdo Schimmel1-0/+12
For better error reporting to user space, add extack messages when skbedit action offload fails. Example: # echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable # tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action skbedit queue_mapping 1234 Error: cls_matchall: Failed to setup flow action. We have an error talking to the kernel # cat /sys/kernel/tracing/trace_pipe tc-185 [002] b..1. 31.802414: netlink_extack: msg=act_skbedit: Offload not supported when "queue_mapping" option is used tc-185 [002] ..... 31.802418: netlink_extack: msg=cls_matchall: Failed to setup flow action # tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action skbedit inheritdsfield Error: cls_matchall: Failed to setup flow action. We have an error talking to the kernel # cat /sys/kernel/tracing/trace_pipe tc-187 [002] b..1. 45.985145: netlink_extack: msg=act_skbedit: Offload not supported when "inheritdsfield" option is used tc-187 [002] ..... 45.985160: netlink_extack: msg=cls_matchall: Failed to setup flow action Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08net/sched: act_gact: Add extack messages for offload failureIdo Schimmel1-0/+15
For better error reporting to user space, add extack messages when gact action offload fails. Example: # echo 1 > /sys/kernel/tracing/events/netlink/netlink_extack/enable # tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action continue Error: cls_matchall: Failed to setup flow action. We have an error talking to the kernel # cat /sys/kernel/tracing/trace_pipe tc-181 [002] b..1. 105.493450: netlink_extack: msg=act_gact: Offload of "continue" action is not supported tc-181 [002] ..... 105.493466: netlink_extack: msg=cls_matchall: Failed to setup flow action # tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action reclassify Error: cls_matchall: Failed to setup flow action. We have an error talking to the kernel # cat /sys/kernel/tracing/trace_pipe tc-183 [002] b..1. 124.126477: netlink_extack: msg=act_gact: Offload of "reclassify" action is not supported tc-183 [002] ..... 124.126489: netlink_extack: msg=cls_matchall: Failed to setup flow action # tc filter add dev dummy0 ingress pref 1 proto all matchall skip_sw action pipe action drop Error: cls_matchall: Failed to setup flow action. We have an error talking to the kernel # cat /sys/kernel/tracing/trace_pipe tc-185 [002] b..1. 137.097791: netlink_extack: msg=act_gact: Offload of "pipe" action is not supported tc-185 [002] ..... 137.097804: netlink_extack: msg=cls_matchall: Failed to setup flow action Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08net/sched: act_api: Add extack to offload_act_setup() callbackIdo Schimmel2-3/+6
The callback is used by various actions to populate the flow action structure prior to offload. Pass extack to this callback so that the various actions will be able to report accurate error messages to user space. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08net/sched: flower: fix parsing of ethertype following VLAN headerVlad Buslov1-0/+2
A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to match the L2 ethertype following the first VLAN header, as confirmed by linked discussion with the maintainer. However, such rule also matches packets that have additional second VLAN header, even though filter has both eth_type and vlan_ethtype set to "ipv4". Looking at the code this seems to be mostly an artifact of the way flower uses flow dissector. First, even though looking at the uAPI eth_type and vlan_ethtype appear like a distinct fields, in flower they are all mapped to the same key->basic.n_proto. Second, flow dissector skips following VLAN header as no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the value of n_proto to last parsed header. With these, such filters ignore any headers present between first VLAN header and first "non magic" header (ipv4 in this case) that doesn't result FLOW_DISSECT_RET_PROTO_AGAIN. Fix the issue by extending flow dissector VLAN key structure with new 'vlan_eth_type' field that matches first ethertype following previously parsed VLAN header. Modify flower classifier to set the new flow_dissector_key_vlan->vlan_eth_type with value obtained from TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs. Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/ Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support") Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08tls: rx: use a define for tag lengthJakub Kicinski1-0/+1
TLS 1.3 has to strip padding, and it starts out 16 bytes from the end of the record. Make it clear this is because of the auth tag. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08tls: rx: don't store the decryption status in socket contextJakub Kicinski2-1/+1
Similar justification to previous change, the information about decryption status belongs in the skb. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08tls: rx: don't store the record type in socket contextJakub Kicinski2-7/+6
Original TLS implementation was handling one record at a time. It stashed the type of the record inside tls context (per socket structure) for convenience. When async crypto support was added [1] the author had to use skb->cb to store the type per-message. The use of skb->cb overlaps with strparser, however, so a hybrid approach was taken where type is stored in context while parsing (since we parse a message at a time) but once parsed its copied to skb->cb. Recently a workaround for sockmaps [2] exposed the previously private struct _strp_msg and started a trend of adding user fields directly in strparser's header. This is cleaner than storing information about an skb in the context. This change is not strictly necessary, but IMHO the ownership of the context field is confusing. Information naturally belongs to the skb. [1] commit 94524d8fc965 ("net/tls: Add support for async decryption of tls records") [2] commit b2c4618162ec ("bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08netfilter: ecache: move to separate structureFlorian Westphal1-2/+6
This makes it easier for a followup patch to only expose ecache related parts of nf_conntrack_net structure. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+0
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-07tcp: Add tracepoint for tcp_set_ca_statePing Gan1-9/+3
The congestion status of a tcp flow may be updated since there is congestion between tcp sender and receiver. It makes sense to add tracepoint for congestion status set function to summate cc status duration and evaluate the performance of network and congestion algorithm. the backgound of this patch is below. Link: https://github.com/iovisor/bcc/pull/3899 Signed-off-by: Ping Gan <jacky_gam_2001@163.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220406010956.19656-1-jacky_gam_2001@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06ipv6: fix locking issues with loops over idev->addr_listNiels Dossche1-0/+8
idev->addr_list needs to be protected by idev->lock. However, it is not always possible to do so while iterating and performing actions on inet6_ifaddr instances. For example, multiple functions (like addrconf_{join,leave}_anycast) eventually call down to other functions that acquire the idev->lock. The current code temporarily unlocked the idev->lock during the loops, which can cause race conditions. Moving the locks up is also not an appropriate solution as the ordering of lock acquisition will be inconsistent with for example mc_lock. This solution adds an additional field to inet6_ifaddr that is used to temporarily add the instances to a temporary list while holding idev->lock. The temporary list can then be traversed without holding idev->lock. This change was done in two places. In addrconf_ifdown, the list_for_each_entry_safe variant of the list loop is also no longer necessary as there is no deletion within that specific loop. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06tcp: add accessors to read/set tp->snd_cwndEric Dumazet1-4/+15
We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-01mctp: Use output netdev to allocate skb headroomMatt Johnston1-2/+0
Previously the skb was allocated with headroom MCTP_HEADER_MAXLEN, but that isn't sufficient if we are using devs that are not MCTP specific. This also adds a check that the smctp_halen provided to sendmsg for extended addressing is the correct size for the netdev. Fixes: 833ef3b91de6 ("mctp: Populate socket implementation") Reported-by: Matthew Rinaldi <mjrinal@g.clemson.edu> Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds71-373/+1220
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-24Merge tag 'flexible-array-transformations-5.18-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
2022-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+18
Merge in overtime fixes, no conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-23net/sched: fix incorrect vlan_push_eth dest fieldLouis Peens1-1/+1
Seems like a potential copy-paste bug slipped in here, the second memcpy should of course be populating src and not dest. Fixes: ab95465cde23 ("net/sched: add vlan push_eth and pop_eth action to the hardware IR") Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20220323092506.21639-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+14
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-03-21 v2 We've added 137 non-merge commits during the last 17 day(s) which contain a total of 143 files changed, 7123 insertions(+), 1092 deletions(-). The main changes are: 1) Custom SEC() handling in libbpf, from Andrii. 2) subskeleton support, from Delyan. 3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao. 4) Fix net.core.bpf_jit_harden race, from Hou. 5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub. 6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami. The arch specific bits will come later. 7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri. 8) Enable non-atomic allocations in local storage, from Joanne. 9) Various var_off ptr_to_btf_id fixed, from Kumar. 10) bpf_ima_file_hash helper, from Roberto. 11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits) selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" bpftool: Fix a bug in subskeleton code generation bpf: Fix bpf_prog_pack when PMU_SIZE is not defined bpf: Fix bpf_prog_pack for multi-node setup bpf: Fix warning for cast from restricted gfp_t in verifier bpf, arm: Fix various typos in comments libbpf: Close fd in bpf_object__reuse_map bpftool: Fix print error when show bpf map bpf: Fix kprobe_multi return probe backtrace Revert "bpf: Add support to inline bpf_get_func_ip helper on x86" bpf: Simplify check in btf_parse_hdr() selftests/bpf/test_lirc_mode2.sh: Exit with proper code bpf: Check for NULL return from bpf_get_btf_vmlinux selftests/bpf: Test skipping stacktrace bpf: Adjust BPF stack helper functions to accommodate skip > 0 bpf: Select proper size for bpf_prog_pack ... ==================== Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21devlink: add explicitly locked flavor of the rate node APIsJakub Kicinski1-0/+4
We'll need an explicitly locked rate node API for netdevsim to switch eswitch mode setting to locked. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-20netfilter: nft_fib: add reduce supportFlorian Westphal1-0/+3
The fib expression stores to a register, so we can't add empty stub. Check that the register that is being written is in fact redundant. In most cases, this is expected to cancel tracking as re-use is unlikely. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nft_meta: extend reduce support to bridge familyFlorian Westphal1-0/+2
its enough to export the meta get reduce helper and then call it from nft_meta_bridge too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: cancel tracking for clobbered destination registersPablo Neira Ayuso2-0/+15
Output of expressions might be larger than one single register, this might clobber existing data. Reset tracking for all destination registers that required to store the expression output. This patch adds three new helper functions: - nft_reg_track_update: cancel previous register tracking and update it. - nft_reg_track_cancel: cancel any previous register tracking info. - __nft_reg_track_cancel: cancel only one single register tracking info. Partial register clobbering detection is also supported by checking the .num_reg field which describes the number of register that are used. This patch updates the following expressions: - meta_bridge - bitwise - byteorder - meta - payload to use these helper functions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: do not reduce read-only expressionsPablo Neira Ayuso1-0/+8
Skip register tracking for expressions that perform read-only operations on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to avoid defining stubs for these expressions. This patch re-enables register tracking which was disabled in ed5f85d42290 ("netfilter: nf_tables: disable register tracking"). Follow up patches add remaining register tracking for existing expressions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 13:04:04 +0000