summaryrefslogtreecommitdiffstats
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-27net: llc: fix skb_over_panicPavel Skripkin1-8/+23
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The problem was in wrong LCC header manipulations. Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is doing following steps: 1. skb allocation with size = len + header size len is passed from userpace and header size is 3 since addr->sllc_xid is set. 2. skb_reserve() for header_len = 3 3. filling all other space with memcpy_from_msg() Ok, at this moment we have fully loaded skb, only headers needs to be filled. Then code comes to llc_sap_action_send_xid_c(). This function pushes 3 bytes for LLC PDU header and initializes it. Then comes llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU header and call skb_push(skb, 3). This looks wrong for 2 reasons: 1. Bytes rigth after LLC header are user data, so this function was overwriting payload. 2. skb_push(skb, 3) call can cause skb_over_panic() since all free space was filled in llc_ui_sendmsg(). (This can happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC header) = 703. SKB_DATA_ALIGN(703) = 704) So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by llc_pdu_header_init() function to push 6 bytes instead of 3. And finally I removed skb_push() call from llc_pdu_init_as_xid_cmd(). This changes should not affect other parts of LLC, since after all steps we just transmit buffer. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25sctp: send pmtu probe only if packet loss in Search Complete stateXin Long1-0/+1
This patch is to introduce last_rtx_chunks into sctp_transport to detect if there's any packet retransmission/loss happened by checking against asoc's rtx_data_chunks in sctp_transport_pl_send(). If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks, the pmtu probe will be sent out. Otherwise, increment the pl.raise_count and return when it's in Search Complete state. With this patch, if in Search Complete state, which is a long period, it doesn't need to keep probing the current pmtu unless there's data packet loss. This will save quite some traffic. v1->v2: - add the missing Fixes tag. Fixes: 0dac127c0557 ("sctp: do black hole detection in search complete state") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25sctp: improve the code for pmtu probe send and recv updateXin Long1-2/+2
This patch does 3 things: - make sctp_transport_pl_send() and sctp_transport_pl_recv() return bool type to decide if more probe is needed to send. - pr_debug() only when probe is really needed to send. - count pl.raise_count in sctp_transport_pl_send() instead of sctp_transport_pl_recv(), and it's only incremented for the 1st probe for the same size. These are preparations for the next patch to make probes happen only when there's packet loss in Search Complete state. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net/tcp_fastopen: remove obsolete externEric Dumazet1-1/+0
After cited commit, sysctl_tcp_fastopen_blackhole_timeout is no longer a global variable. Fixes: 3733be14a32b ("ipv4: Namespaceify tcp_fastopen_blackhole_timeout knob") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Link: https://lore.kernel.org/r/20210719092028.3016745-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-14Merge tag 'net-5.14-rc2' of ↵Linus Torvalds11-212/+28
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ...
2021-07-09mptcp: avoid processing packet if a subflow resetJianguo Wu1-2/+3
If check_fully_established() causes a subflow reset, it should not continue to process the packet in tcp_data_queue(). Add a return value to mptcp_incoming_options(), and return false if a subflow has been reset, else return true. Then drop the packet in tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options() return false. Fixes: d582484726c4 ("mptcp: fix fallback for MP_JOIN subflows") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net: validate lwtstate->data before returning from skb_tunnel_info()Taehee Yoo1-1/+3
skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ] Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-1/+1
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Do not refresh timeout in SYN_SENT for syn retransmissions. Add selftest for unreplied TCP connection, from Florian Westphal. 2) Fix null dereference from error path with hardware offload in nftables. 3) Remove useless nf_ct_gre_keymap_flush() from netns exit path, from Vasily Averin. 4) Missing rcu read-lock side in ctnetlink helper info dump, also from Vasily. 5) Do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry, from Ali Abdallah and Florian Westphal. 6) Add tcp_ignore_invalid_rst sysctl to allow to disable out of segment RSTs, from Ali. 7) KCSAN fix for nf_conntrack_all_lock(), from Manfred Spraul. 8) Honor NFTA_LAST_SET in nft_last. 9) Fix incorrect arithmetics when restore last_jiffies in nft_last. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: Add struct bond_ipesc to manage SATaehee Yoo1-1/+8
bonding has been supporting ipsec offload. When SA is added, bonding just passes SA to its own active real interface. But it doesn't manage SA. So, when events(add/del real interface, active real interface change, etc) occur, bonding can't handle that well because It doesn't manage SA. So some problems(panic, UAF, refcnt leak)occur. In order to make it stable, it should manage SA. That's the reason why struct bond_ipsec is added. When a new SA is added to bonding interface, it is stored in the bond_ipsec list. And the SA is passed to a current active real interface. If events occur, it uses bond_ipsec data to handle these events. bond->ipsec_list is protected by bond->ipsec_lock. If a current active real interface is changed, the following logic works. 1. delete all SAs from old active real interface 2. Add all SAs to the new active real interface. 3. If a new active real interface doesn't support ipsec offload or SA's option, it sets real_dev to NULL. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06netfilter: conntrack: add new sysctl to disable RST checkAli Abdallah1-0/+1
This patch adds a new sysctl tcp_ignore_invalid_rst to disable marking out of segments RSTs as INVALID. Signed-off-by: Ali Abdallah <aabdallah@suse.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-03Merge branch 'work.iov_iter' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter cleanups and fixes. There are followups, but this is what had sat in -next this cycle. IMO the macro forest in there became much thinner and easier to follow..." * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller clean up copy_mc_pipe_to_iter() pipe_zero(): we don't need no stinkin' kmap_atomic()... iov_iter: clean csum_and_copy_...() primitives up a bit copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases iterate_xarray(): only of the first iteration we might get offset != 0 pull handling of ->iov_offset into iterate_{iovec,bvec,xarray} iov_iter: make iterator callbacks use base and len instead of iovec iov_iter: make the amount already copied available to iterator callbacks iov_iter: get rid of separate bvec and xarray callbacks iov_iter: teach iterate_{bvec,xarray}() about possible short copies iterate_bvec(): expand bvec.h macro forest, massage a bit iov_iter: unify iterate_iovec and iterate_kvec iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec iterate_and_advance(): get rid of magic in case when n is 0 csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter() iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant [xarray] iov_iter_npages(): just use DIV_ROUND_UP() iov_iter_npages(): don't bother with iterate_all_kinds() ...
2021-07-02net: ipv6: fix return value of ip6_skb_dst_mtuVadim Fedorenko1-1/+1
Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced ip6_skb_dst_mtu with return value of signed int which is inconsistent with actually returned values. Also 2 users of this function actually assign its value to unsigned int variable and only __xfrm6_output assigns result of this function to signed variable but actually uses as unsigned in further comparisons and calls. Change this function to return unsigned int value. Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-02netfilter: conntrack: nf_ct_gre_keymap_flush() removalVasily Averin1-1/+0
nf_ct_gre_keymap_flush() is useless. It is called from nf_conntrack_cleanup_net_list() only and tries to remove nf_ct_gre_keymap entries from pernet gre keymap list. Though: a) at this point the list should already be empty, all its entries were deleted during the conntracks cleanup, because nf_conntrack_cleanup_net_list() executes nf_ct_iterate_cleanup(kill_all) before nf_conntrack_proto_pernet_fini(): nf_conntrack_cleanup_net_list +- nf_ct_iterate_cleanup | nf_ct_put | nf_conntrack_put | nf_conntrack_destroy | destroy_conntrack | destroy_gre_conntrack | nf_ct_gre_keymap_destroy `- nf_conntrack_proto_pernet_fini nf_ct_gre_keymap_flush b) Let's say we find that the keymap list is not empty. This means netns still has a conntrack associated with gre, in which case we should not free its memory, because this will lead to a double free and related crashes. However I doubt it could have gone unnoticed for years, obviously this does not happen in real life. So I think we can remove both nf_ct_gre_keymap_flush() and nf_conntrack_proto_pernet_fini(). Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-01tcp: consistently disable header prediction for mptcpPaolo Abeni1-0/+4
The MPTCP receive path is hooked only into the TCP slow-path. The DSS presence allows plain MPTCP traffic to hit that consistently. Since commit e1ff9e82e2ea ("net: mptcp: improve fallback to TCP"), when an MPTCP socket falls back to TCP, it can hit the TCP receive fast-path, and delay or stop triggering the event notification. Address the issue explicitly disabling the header prediction for MPTCP sockets. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200 Fixes: e1ff9e82e2ea ("net: mptcp: improve fallback to TCP") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: remove the caif_hsi driverChristoph Hellwig1-200/+0
The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get, but this symbol is not provided anywhere in the kernel tree. Remove this driver given that it is dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: sock: extend SO_TIMESTAMPING for PHC bindingYangbo Lu1-2/+6
Since PTP virtual clock support is added, there can be several PTP virtual clocks based on one PTP physical clock for timestamping. This patch is to extend SO_TIMESTAMPING API to support PHC (PTP Hardware Clock) binding by adding a new flag SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are in use, user space can configure to bind one for timestamping, but PTP physical clock is not supported and not needed to bind. This patch is preparation for timestamp conversion from raw timestamp to a specific PTP virtual clock time in core net. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01sctp: move 198 addresses from unusable to private scopeXin Long1-3/+1
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses was never published. These addresses as private addresses should be allowed to use in SCTP. As Michael Tuexen suggested, this patch is to move 198 addresses from unusable to private scope. Reported-by: Sérgio <surkamp@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: annotate data race around sk_ll_usecEric Dumazet1-1/+1
sk_ll_usec is read locklessly from sk_can_busy_loop() while another thread can change its value in sock_setsockopt() This is correct but needs annotations. BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0: sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175 __sys_setsockopt+0x14f/0x200 net/socket.c:2100 __do_sys_setsockopt net/socket.c:2115 [inline] __se_sys_setsockopt net/socket.c:2112 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1: sk_can_busy_loop include/net/busy_poll.h:41 [inline] __skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273 unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101 unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067 ____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244 ___sys_recvmsg net/socket.c:2598 [inline] do_recvmmsg+0x35c/0x9f0 net/socket.c:2692 __sys_recvmmsg net/socket.c:2771 [inline] __do_sys_recvmmsg net/socket.c:2794 [inline] __se_sys_recvmmsg net/socket.c:2787 [inline] __x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000101 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-18/+49
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29tcp: change ICSK_CA_PRIV_SIZE definitionEric Dumazet1-1/+1
Instead of a magic number (13 currently) and having to change it every other year, use sizeof_field() macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring2-1/+3
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29net: dsa: reference count the FDB addresses at the cross-chip notifier levelVladimir Oltean1-0/+1
The same concerns expressed for host MDB entries are valid for host FDBs just as well: - in the case of multiple bridges spanning the same switch chip, deleting a host FDB entry that belongs to one bridge will result in breakage to the other bridge - not deleting FDB entries across DSA links means that the switch's hardware tables will eventually run out, given enough wear&tear So do the same thing and introduce reference counting for CPU ports and DSA links using the same data structures as we have for MDB entries. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29net: dsa: reference count the MDB entries at the cross-chip notifier levelVladimir Oltean1-0/+12
Ever since the cross-chip notifiers were introduced, the design was meant to be simplistic and just get the job done without worrying too much about dangling resources left behind. For example, somebody installs an MDB entry on sw0p0 in this daisy chain topology. It gets installed using ds->ops->port_mdb_add() on sw0p0, sw1p4 and sw2p4. | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ user ] [ user ] [ user ] [ dsa ] [ cpu ] [ x ] [ ] [ ] [ ] [ ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] [ ] [ ] [ ] [ ] [ x ] | +---------+ | sw2p0 sw2p1 sw2p2 sw2p3 sw2p4 [ user ] [ user ] [ user ] [ user ] [ dsa ] [ ] [ ] [ ] [ ] [ x ] Then the same person deletes that MDB entry. The cross-chip notifier for deletion only matches sw0p0: | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ user ] [ user ] [ user ] [ dsa ] [ cpu ] [ x ] [ ] [ ] [ ] [ ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] [ ] [ ] [ ] [ ] [ ] | +---------+ | sw2p0 sw2p1 sw2p2 sw2p3 sw2p4 [ user ] [ user ] [ user ] [ user ] [ dsa ] [ ] [ ] [ ] [ ] [ ] Why? Because the DSA links are 'trunk' ports, if we just go ahead and delete the MDB from sw1p4 and sw2p4 directly, we might delete those multicast entries when they are still needed. Just consider the fact that somebody does: - add a multicast MAC address towards sw0p0 [ via the cross-chip notifiers it gets installed on the DSA links too ] - add the same multicast MAC address towards sw0p1 (another port of that same switch) - delete the same multicast MAC address from sw0p0. At this point, if we deleted the MAC address from the DSA links, it would be flooded, even though there is still an entry on switch 0 which needs it not to. So that is why deletions only match the targeted source port and nothing on DSA links. Of course, dangling resources means that the hardware tables will eventually run out given enough additions/removals, but hey, at least it's simple. But there is a bigger concern which needs to be addressed, and that is our support for SWITCHDEV_OBJ_ID_HOST_MDB. DSA simply translates such an object into a dsa_port_host_mdb_add() which ends up as ds->ops->port_mdb_add() on the upstream port, and a similar thing happens on deletion: dsa_port_host_mdb_del() will trigger ds->ops->port_mdb_del() on the upstream port. When there are 2 VLAN-unaware bridges spanning the same switch (which is a use case DSA proudly supports), each bridge will install its own SWITCHDEV_OBJ_ID_HOST_MDB entries. But upon deletion, DSA goes ahead and emits a DSA_NOTIFIER_MDB_DEL for dp->cpu_dp, which is shared between the user ports enslaved to br0 and the user ports enslaved to br1. Not good. The host-trapped multicast addresses installed by br1 will be deleted when any state changes in br0 (IGMP timers expire, or ports leave, etc). To avoid this, we could of course go the route of the zero-sum game and delete the DSA_NOTIFIER_MDB_DEL call for dp->cpu_dp. But the better design is to just admit that on shared ports like DSA links and CPU ports, we should be reference counting calls, even if this consumes some dynamic memory which DSA has traditionally avoided. On the flip side, the hardware tables of switches are limited in size, so it would be good if the OS managed them properly instead of having them eventually overflow. To address the memory usage concern, we only apply the refcounting of MDB entries on ports that are really shared (CPU ports and DSA links) and not on user ports. In a typical single-switch setup, this means only the CPU port (and the host MDB entries are not that many, really). The name of the newly introduced data structures (dsa_mac_addr) is chosen in such a way that will be reusable for host FDB entries (next patch). With this change, we can finally have the same matching logic for the MDB additions and deletions, as well as for their host-trapped variants. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29net: dsa: introduce dsa_is_upstream_port and dsa_switch_is_upstream_ofVladimir Oltean1-0/+26
In preparation for the new cross-chip notifiers for host addresses, let's introduce some more topology helpers which we are going to use to discern switches that are in our path towards the dedicated CPU port from switches that aren't. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge tag 'for-net-next-2021-06-28' of ↵David S. Miller3-63/+68
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for QCA_ROME device (0cf3:e500) and RTL8822CE - Update management interface revision to 21 - Use of incluse language - Proper handling of HCI_LE_Advertising_Set_Terminated event - Recovery handing of HCI ncmd=0 - Various memory fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28sctp: validate from_addr_param returnMarcelo Ricardo Leitner1-1/+1
Ilja reported that, simply putting it, nothing was validating that from_addr_param functions were operating on initialized memory. That is, the parameter itself was being validated by sctp_walk_params, but it doesn't check for types and their specific sizes and it could be a 0-length one, causing from_addr_param to potentially work over the next parameter or even uninitialized memory. The fix here is to, in all calls to from_addr_param, check if enough space is there for the wanted IP address type. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messagesAndreas Roeseler1-0/+1
This patch builds off of commit 2b246b2569cd2ac6ff700d0dce56b8bae29b1842 and adds functionality to respond to ICMPV6 PROBE requests. Add icmp_build_probe function to construct PROBE requests for both ICMPV4 and ICMPV6. Modify icmpv6_rcv to detect ICMPV6 PROBE messages and call the icmpv6_echo_reply handler. Modify icmpv6_echo_reply to build a PROBE response message based on the queried interface. This patch has been tested using a branch of the iputils git repo which can be found here: https://github.com/Juniper-Clinic-2020/iputils/tree/probe-request Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28flow_offload: action should not be NULL when it is referencedgushengxian1-5/+7
"action" should not be NULL when it is referenced. Signed-off-by: gushengxian <13145886936@163.com> Signed-off-by: gushengxian <gushengxian@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: switchdev: add a context void pointer to struct switchdev_notifier_infoVladimir Oltean1-6/+7
In the case where the driver asks for a replay of a certain type of event (port object or attribute) for a bridge port that is a LAG, it may do so because this port has just joined the LAG. But there might already be other switchdev ports in that LAG, and it is preferable that those preexisting switchdev ports do not act upon the replayed event. The solution is to add a context to switchdev events, which is NULL most of the time (when the bridge layer initiates the call) but which can be set to a value controlled by the switchdev driver when a replay is requested. The driver can then check the context to figure out if all ports within the LAG should act upon the switchdev event, or just the ones that match the context. We have to modify all switchdev_handle_* helper functions as well as the prototypes in the drivers that use these helpers too, because these helpers hide the underlying struct switchdev_notifier_info from us and there is no way to retrieve the context otherwise. The context structure will be populated and used in later patches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gitDavid S. Miller2-22/+16
/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-06-28 1) Remove an unneeded error assignment in esp4_gro_receive(). From Yang Li. 2) Add a new byseq state hashtable to find acquire states faster. From Sabrina Dubroca. 3) Remove some unnecessary variables in pfkey_create(). From zuoqilin. 4) Remove the unused description from xfrm_type struct. From Florian Westphal. 5) Fix a spelling mistake in the comment of xfrm_state_ok(). From gushengxian. 6) Replace hdr_off indirections by a small helper function. From Florian Westphal. 7) Remove xfrm4_output_finish and xfrm6_output_finish declarations, they are not used anymore.From Antony Antony. 8) Remove xfrm replay indirections. From Florian Westphal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge tag 'mac80211-next-for-net-next-2021-06-25' of ↵David S. Miller2-35/+86
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes berg says: ==================== Lots of changes: * aggregation handling improvements for some drivers * hidden AP discovery on 6 GHz and other HE 6 GHz improvements * minstrel improvements for no-ack frames * deferred rate control for TXQs to improve reaction times * virtual time-based airtime scheduler * along with various little cleanups/fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: lwtunnel: handle MTU calculation in forwadingVadim Fedorenko2-8/+20
Commit 14972cbd34ff ("net: lwtunnel: Handle fragmentation") moved fragmentation logic away from lwtunnel by carry encap headroom and use it in output MTU calculation. But the forwarding part was not covered and created difference in MTU for output and forwarding and further to silent drops on ipv4 forwarding path. Fix it by taking into account lwtunnel encap headroom. The same commit also introduced difference in how to treat RTAX_MTU in IPv4 and IPv6 where latter explicitly removes lwtunnel encap headroom from route MTU. Make IPv4 version do the same. Fixes: 14972cbd34ff ("net: lwtunnel: Handle fragmentation") Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-26Bluetooth: Fix Set Extended (Scan Response) DataLuiz Augusto von Dentz2-6/+8
These command do have variable length and the length can go up to 251, so this changes the struct to not use a fixed size and then when creating the PDU only the actual length of the data send to the controller. Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when filtering devicesArchie Pusaka2-12/+12
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: blacklist -> reject list whitelist -> accept list Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when tracking connectionsArchie Pusaka1-3/+3
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in SMPArchie Pusaka1-1/+1
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator slave -> responder Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI LE featuresArchie Pusaka1-3/+3
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language to describe CPBArchie Pusaka2-15/+15
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced when describing the connectionless peripheral broadcast feature: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in hci_core.hArchie Pusaka1-22/+22
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral These attributes are not used elsewhere in the code. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Add ncmd=0 recovery handlingManish Mandlik2-0/+2
During command status or command complete event, the controller may set ncmd=0 indicating that it is not accepting any more commands. In such a case, host holds off sending any more commands to the controller. If the controller doesn't recover from such condition, host will wait forever, until the user decides that the Bluetooth is broken and may power cycles the Bluetooth. This patch triggers the hardware error to reset the controller and driver when it gets into such state as there is no other wat out. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Return whether a connection is outboundYu Liu2-1/+2
When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user space we will set the flags to tell if the established connection is outbound or not. This is useful for the user space to log better metrics and error messages. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-25Merge tag 'wireless-drivers-next-2021-06-25' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.14 Second, and most likely the last, set of patches for v5.14. mt76 and iwlwifi have most patches in this round, but rtw88 also has some new features. Nothing special really standing out. mt76 * mt7915 MSI support * disable ASPM on mt7915 * mt7915 tx status reporting * mt7921 decap offload rtw88 * beacon filter support * path diversity support * firmware crash information via devcoredump * quirks for disabling pci capabilities mt7601u * add USB ID for a XiaoDu WiFi Dongle ath11k * enable support for QCN9074 PCI devices brcmfmac * support parse country code map from DeviceTree iwlwifi * support for new hardware * support for BIOS control of 11ax enablement in Russia * support UNII4 band enablement from BIOS ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24sctp: do black hole detection in search complete stateXin Long1-1/+2
Currently the PLPMUTD probe will stop for a long period (interval * 30) after it enters search complete state. If there's a pmtu change on the route path, it takes a long time to be aware if the ICMP TooBig packet is lost or filtered. As it says in rfc8899#section-4.3: "A DPLPMTUD method MUST NOT rely solely on this method." (ICMP PTB message). This patch is to enable the other method for search complete state: "A PL can use the DPLPMTUD probing mechanism to periodically generate probe packets of the size of the current PLPMTU." With this patch, the probe will continue with the current pmtu every 'interval' until the PMTU_RAISE_TIMER 'timeout', which we implement by adding raise_count to raise the probe size when it counts to 30 and removing the SCTP_PL_COMPLETE check for PMTU_RAISE_TIMER. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: macsec: fix the length used to copy the key for offloadingAntoine Tenart1-1/+1
The key length used when offloading macsec to Ethernet or PHY drivers was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length accepted in uAPI) and secy->key_len to copy it. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24xdp: Add proper __rcu annotations to redirect map entriesToke Høiland-Jørgensen1-1/+1
XDP_REDIRECT works by a three-step process: the bpf_redirect() and bpf_redirect_map() helpers will lookup the target of the redirect and store it (along with some other metadata) in a per-CPU struct bpf_redirect_info. Next, when the program returns the XDP_REDIRECT return code, the driver will call xdp_do_redirect() which will use the information thus stored to actually enqueue the frame into a bulk queue structure (that differs slightly by map type, but shares the same principle). Finally, before exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will flush all the different bulk queues, thus completing the redirect. Pointers to the map entries will be kept around for this whole sequence of steps, protected by RCU. However, there is no top-level rcu_read_lock() in the core code; instead drivers add their own rcu_read_lock() around the XDP portions of the code, but somewhat inconsistently as Martin discovered[0]. However, things still work because everything happens inside a single NAPI poll sequence, which means it's between a pair of calls to local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could document this intention by using rcu_dereference_check() with rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and lockdep to verify that everything is done correctly. This patch does just that: we add an __rcu annotation to the map entry pointers and remove the various comments explaining the NAPI poll assurance strewn through devmap.c in favour of a longer explanation in filter.c. The goal is to have one coherent documentation of the entire flow, and rely on the RCU annotations as a "standard" way of communicating the flow in the map code (which can additionally be understood by sparse and lockdep). The RCU annotation replacements result in a fairly straight-forward replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE() becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the proper constructs to cast the pointer back and forth between __rcu and __kernel address space (for the benefit of sparse). The one complication is that xskmap has a few constructions where double-pointers are passed back and forth; these simply all gain __rcu annotations, and only the final reference/dereference to the inner-most pointer gets changed. With this, everything can be run through sparse without eliciting complaints, and lockdep can verify correctness even without the use of rcu_read_lock() in the drivers. Subsequent patches will clean these up from the drivers. [0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/ [1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/ Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
2021-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+7
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-23 The following pull-request contains BPF updates for your *net* tree. We've added 14 non-merge commits during the last 6 day(s) which contain a total of 13 files changed, 137 insertions(+), 64 deletions(-). Note that when you merge net into net-next, there is a small merge conflict between 9f2470fbc4cb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf with c49661aa6f70 ("skmsg: Remove unused parameters of sk_msg_wait_data()") from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data() and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take tcp_msg_wait_data() and remove err parameter from the function, iii) for net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data() implementation and its prototype in header. The main changes are: 1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend. 2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski. 3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang. 4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar. 5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson. 6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23net/tls: Remove the __TLS_DEC_STATS() macro.Kuniyuki Iwashima1-2/+0
The commit d26b698dd3cd ("net/tls: add skeleton of MIB statistics") introduced __TLS_DEC_STATS(), but it is not used and __SNMP_DEC_STATS() is not defined also. Let's remove it. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23Merge tag 'mlx5-net-next-2021-06-22' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-net-next-2021-06-22 1) Various minor cleanups and fixes from net-next branch 2) Optimize mlx5 feature check on tx and a fix to allow Vxlan with Ipsec offloads ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23Merge branch 'master' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-06-23 1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery. From Sabrina Dubroca 2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype for the PREEMPT_RT case. From Varad Gautam. 3) Remove a repeated declaration of xfrm_parse_spi. From Shaokun Zhang. 4) IPv4 beet mode can't handle fragments, but IPv6 does. commit 68dc022d04eb ("xfrm: BEET mode doesn't support fragments for inner packets") handled IPv4 and IPv6 the same way. Relax the check for IPv6 because fragments are possible here. From Xin Long. 5) Memory allocation failures are not reported for XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct. Fix this by moving both cases in front of the function. 6) Fix a missing initialization in the xfrm offload fallback fail case for bonding devices. From Ayush Sawal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 09:38:08 +0000