summaryrefslogtreecommitdiffstats
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds4-27/+36
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-10Merge branch 'work.sysctl' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sysctl fixes from Al Viro: "Fixups to regressions in sysctl series" * 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysctl: reject gigantic reads/write to sysctl files cdrom: fix an incorrect __user annotation on cdrom_sysctl_info trace: fix an incorrect __user annotation on stack_trace_sysctl random: fix an incorrect __user annotation on proc_do_entropy net/sysctl: remove leftover __user annotations on neigh_proc_dointvec* net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl
2020-06-10vxlan: Remove access to nexthop group structDavid Ahern1-0/+11
vxlan driver should be using helpers to access nexthop struct internals. Remove open check if whether nexthop is multipath in favor of the existing nexthop_is_multipath helper. Add a new helper, nexthop_has_v4, to cover the need to check has_v4 in a group. Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10nexthop: Fix fdb labeling for groupsDavid Ahern1-1/+16
fdb nexthops are marked with a flag. For standalone nexthops, a flag was added to the nh_info struct. For groups that flag was added to struct nexthop when it should have been added to the group information. Fix by removing the flag from the nexthop struct and adding a flag to nh_group that mirrors nh_info and is really only a caching of the individual types. Add a helper, nexthop_is_fdb, for use by the vxlan code and fixup the internal code to use the flag from either nh_info or nh_group. v2 - propagate fdb_nh in remove_nh_grp_entry Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09net: flow_offload: remove indirect flow_block declarations leftoverPablo Neira Ayuso1-24/+0
Remove function declarations that are not available in the tree anymore. Fixes: 709ffbe19b77 ("net: remove indirect block netdev event registration") Reported-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09dccp: Fix possible memleak in dccp_init and dccp_finiWang Hai1-0/+6
There are some memory leaks in dccp_init() and dccp_fini(). In dccp_fini() and the error handling path in dccp_init(), free lhash2 is missing. Add inet_hashinfo2_free_mod() to do it. If inet_hashinfo2_init_mod() failed in dccp_init(), percpu_counter_destroy() should be called to destroy dccp_orphan_count. It need to goto out_free_percpu when inet_hashinfo2_init_mod() failed. Fixes: c92c81df93df ("net: dccp: fix kernel crash on module load") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08Merge tag 'mac80211-for-davem-2020-06-08' of ↵David S. Miller1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a small update: * fix the deadlock on rfkill/wireless removal that a few people reported * fix an uninitialized variable * update wiki URLs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08net/sysctl: remove leftover __user annotations on neigh_proc_dointvec*Christoph Hellwig1-4/+3
Remove the leftover __user annotation on the prototypes for neigh_proc_dointvec*. The implementations already got this right, but the headers kept the __user tags around. Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Reported-by: build test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-05cfg80211: fix management registrations deadlockJohannes Berg1-2/+3
Lockdep reports that we may deadlock because we take the RTNL on the work struct, but flush it under RTNL. Clearly, it's correct. In practice, this can happen when doing rfkill on an active device. Fix this by moving the work struct to the wiphy (registered dev) layer, and iterate over all the wdevs inside there. This then means we need to track which one of them has work to do, so we don't update to the driver for all wdevs all the time. Also fix a locking bug I noticed while working on this - the registrations list is iterated as if it was an RCU list, but it isn't handle that way - and we need to lock now for the update flag anyway, so remove the RCU. Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-and-tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-04inet_connection_sock: clear inet_num out of destroy helperPaolo Abeni1-1/+0
Clearing the 'inet_num' field is necessary and safe if and only if the socket is not bound. The MPTCP protocol calls the destroy helper on bound sockets, as tcp_v{4,6}_syn_recv_sock completed successfully. Move the clearing of such field out of the common code, otherwise the MPTCP MP_JOIN error path will find the wrong 'inet_num' value on socket disposal, __inet_put_port() will acquire the wrong lock and bind_node removal could race with other modifiers possibly corrupting the bind hash table. Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Fixes: 729cd6436f35 ("mptcp: cope better with MP_JOIN failure") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-04seg6: fix seg6_validate_srh() to avoid slab-out-of-boundsAhmed Abdelsalam1-1/+1
The seg6_validate_srh() is used to validate SRH for three cases: case1: SRH of data-plane SRv6 packets to be processed by the Linux kernel. Case2: SRH of the netlink message received from user-space (iproute2) Case3: SRH injected into packets through setsockopt In case1, the SRH can be encoded in the Reduced way (i.e., first SID is carried in DA only and not represented as SID in the SRH) and the seg6_validate_srh() now handles this case correctly. In case2 and case3, the SRH shouldn’t be encoded in the Reduced way otherwise we lose the first segment (i.e., the first hop). The current implementation of the seg6_validate_srh() allow SRH of case2 and case3 to be encoded in the Reduced way. This leads a slab-out-of-bounds problem. This patch verifies SRH of case1, case2 and case3. Allowing case1 to be reduced while preventing SRH of case2 and case3 from being reduced . Reported-by: syzbot+e8c028b62439eac42073@syzkaller.appspotmail.com Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 0cb7498f234e ("seg6: fix SRH processing to comply with RFC8754") Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds57-509/+1881
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-01Merge branch 'uaccess.csum' of ↵Linus Torvalds1-10/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess/csum updates from Al Viro: "Regularize the sitation with uaccess checksum primitives: - fold csum_partial_... into csum_and_copy_..._user() - on x86 collapse several access_ok()/stac()/clac() into user_access_begin()/user_access_end()" * 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: default csum_and_copy_to_user(): don't bother with access_ok() take the dummy csum_and_copy_from_user() into net/checksum.h arm: switch to csum_and_copy_from_user() sh32: convert to csum_and_copy_from_user() m68k: convert to csum_and_copy_from_user() xtensa: switch to providing csum_and_copy_from_user() sparc: switch to providing csum_and_copy_from_user() parisc: turn csum_partial_copy_from_user() into csum_and_copy_from_user() alpha: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user() x86: switch 32bit csum_and_copy_to_user() to user_access_{begin,end}() x86: switch both 32bit and 64bit to providing csum_and_copy_from_user() x86_64: csum_..._copy_..._user(): switch to unsafe_..._user() get rid of csum_partial_copy_to_user()
2020-06-01bpf: Add link-based BPF program attachment to network namespaceJakub Sitnicki1-0/+1
Extend bpf() syscall subcommands that operate on bpf_link, that is LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to network namespaces (only flow dissector at the moment). Link-based and prog-based attachment can be used interchangeably, but only one can exist at a time. Attempts to attach a link when a prog is already attached directly, and the other way around, will be met with -EEXIST. Attempts to detach a program when link exists result in -EINVAL. Attachment of multiple links of same attach type to one netns is not supported with the intention to lift the restriction when a use-case presents itself. Because of that link create returns -E2BIG when trying to create another netns link, when one already exists. Link-based attachments to netns don't keep a netns alive by holding a ref to it. Instead links get auto-detached from netns when the latter is being destroyed, using a pernet pre_exit callback. When auto-detached, link lives in defunct state as long there are open FDs for it. -ENOLINK is returned if a user tries to update a defunct link. Because bpf_link to netns doesn't hold a ref to struct net, special care is taken when releasing, updating, or filling link info. The netns might be getting torn down when any of these link operations are in progress. That is why auto-detach and update/release/fill_info are synchronized by the same mutex. Also, link ops have to always check if auto-detach has not happened yet and if netns is still alive (refcnt > 0). Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com
2020-06-01flow_dissector: Move out netns_bpf prog callbacksJakub Sitnicki1-0/+6
Move functions to manage BPF programs attached to netns that are not specific to flow dissector to a dedicated module named bpf/net_namespace.c. The set of functions will grow with the addition of bpf_link support for netns attached programs. This patch prepares ground by creating a place for it. This is a code move with no functional changes intended. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-4-jakub@cloudflare.com
2020-06-01net: Introduce netns_bpf for BPF programs attached to netnsJakub Sitnicki2-1/+20
In order to: (1) attach more than one BPF program type to netns, or (2) support attaching BPF programs to netns with bpf_link, or (3) support multi-prog attach points for netns we will need to keep more state per netns than a single pointer like we have now for BPF flow dissector program. Prepare for the above by extracting netns_bpf that is part of struct net, for storing all state related to BPF programs attached to netns. Turn flow dissector callbacks for querying/attaching/detaching a program into generic ones that operate on netns_bpf. Next patch will move the generic callbacks into their own module. This is similar to how it is organized for cgroup with cgroup_bpf. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20200531082846.2117903-3-jakub@cloudflare.com
2020-06-01xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi1-1/+1
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
2020-06-01xdp: Introduce xdp_convert_frame_to_buff utility routineLorenzo Bianconi1-0/+10
Introduce xdp_convert_frame_to_buff utility routine to initialize xdp_buff fields from xdp_frames ones. Rely on xdp_convert_frame_to_buff in veth xdp code. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/87acf133073c4b2d4cbb8097e8c2480c0a0fac32.1590698295.git.lorenzo@kernel.org
2020-06-01net: Make locking in sock_bindtoindex optionalFerenc Fejes1-1/+1
The sock_bindtoindex intended for kernel wide usage however it will lock the socket regardless of the context. This modification relax this behavior optionally: locking the socket will be optional by calling the sock_bindtoindex with lock_sk = true. The modification applied to all users of the sock_bindtoindex. Signed-off-by: Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/bee6355da40d9e991b2f2d12b67d55ebb5f5b207.1590871065.git.fejes@inf.elte.hu
2020-06-01bpf: Fix running sk_skb program types with ktlsJohn Fastabend1-0/+9
KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-06-01xdp: Add xdp_txq_info to xdp_buffDavid Ahern1-0/+5
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the moment only the device is added. Other fields (queue_index) can be added as use cases arise. >From a UAPI perspective, add egress_ifindex to xdp context for bpf programs to see the Tx device. Update the verifier to only allow accesses to egress_ifindex by XDP programs with BPF_XDP_DEVMAP expected attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-06-01Merge branch 'linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ...
2020-06-01bridge: mrp: Add support for role MRAHoratiu Vultur1-0/+1
A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01bridge: mrp: Set the priority of MRP instanceHoratiu Vultur1-0/+1
Each MRP instance has a priority, a lower value means a higher priority. The priority of MRP instance is stored in MRP_Test frame in this way all the MRP nodes in the ring can see other nodes priority. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01devlink: Add ACL control packet trapsIdo Schimmel1-0/+12
Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01devlink: Add layer 3 control packet trapsIdo Schimmel1-0/+126
Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01devlink: Add layer 2 control packet trapsIdo Schimmel1-0/+48
Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01devlink: Create dedicated trap group for layer 3 exceptionsIdo Schimmel1-0/+3
Packets that hit exceptions during layer 3 forwarding must be trapped to the CPU for the control plane to function properly. Create a dedicated group for them, so that user space could choose to assign a different policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2-2/+11
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next to extend ctnetlink and the flowtable infrastructure: 1) Extend ctnetlink kernel side netlink dump filtering capabilities, from Romain Bellan. 2) Generalise the flowtable hook parser to take a hook list. 3) Pass a hook list to the flowtable hook registration/unregistration. 4) Add a helper function to release the flowtable hook list. 5) Update the flowtable event notifier to pass a flowtable hook list. 6) Allow users to add new devices to an existing flowtables. 7) Allow users to remove devices to an existing flowtables. 8) Allow for registering a flowtable with no initial devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01net: remove indirect block netdev event registrationPablo Neira Ayuso1-9/+0
Drivers do not register to netdev events to set up indirect blocks anymore. Remove __flow_indr_block_cb_register() and __flow_indr_block_cb_unregister(). The frontends set up the callbacks through flow_indr_dev_setup_block() Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01net: flow_offload: consolidate indirect flow_block infrastructurePablo Neira Ayuso1-0/+19
Tunnel devices provide no dev->netdev_ops->ndo_setup_tc(...) interface. The tunnel device and route control plane does not provide an obvious way to relate tunnel and physical devices. This patch allows drivers to register a tunnel device offload handler for the tc and netfilter frontends through flow_indr_dev_register() and flow_indr_dev_unregister(). The frontend calls flow_indr_dev_setup_offload() that iterates over the list of drivers that are offering tunnel device hardware offload support and it sets up the flow block for this tunnel device. If the driver module is removed, the indirect flow_block ends up with a stale callback reference. The module removal path triggers the dev_shutdown() path to remove the qdisc and the flow_blocks for the physical devices. However, this is not useful for tunnel devices, where relation between the physical and the tunnel device is not explicit. This patch introduces a cleanup callback that is invoked when the driver module is removed to clean up the tunnel device flow_block. This patch defines struct flow_block_indr and it uses it from flow_block_cb to store the information that front-end requires to perform the flow_block_cb cleanup on module removal. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01netfilter: nf_flowtable: expose nf_flow_table_gc_cleanup()Pablo Neira Ayuso1-0/+2
This function schedules the flow teardown state and it forces a gc run. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge branch 'for-upstream' of ↵David S. Miller2-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-06-01 Here's one last bluetooth-next pull request for 5.8, which I hope can still be accepted. - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991 - Multiple fixes/imprvovements to Qualcomm-based devices - Fix GAP/SEC/SEM/BI-10-C qualfication test case - Added support for Broadcom BCM4350C5 device - Several other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-16/+101
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31Merge tag 'mac80211-next-for-davem-2020-05-31' of ↵David S. Miller2-33/+150
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of changes, including * many 6 GHz changes, though it's not _quite_ complete (I left out scanning for now, we're still discussing) * allow userspace SA-query processing for operating channel validation * TX status for control port TX, for AP-side operation * more per-STA/TID control options * move to kHz for channels, for future S1G operation * various other small changes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31cfg80211: support bigger kek/kck key lengthNathan Errera1-3/+9
With some newer AKMs, the KCK and KEK are bigger, so allow that if the driver advertises support for it. In addition, add a new attribute for the AKM so we can use it for offloaded rekeying. Signed-off-by: Nathan Errera <nathan.errera@intel.com> [reword commit message] Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer1-0/+20
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg1-1/+3
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: add and expose HE 6 GHz band capabilitiesJohannes Berg1-0/+3
These capabilities cover what would otherwise be transported in HT/VHT capabilities, but only a subset thereof that is actually needed on 6 GHz with HE already present. Expose the capabilities to userspace, drivers are expected to set them as using the 6 GHz band (currently) requires HE capability. Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: handle 6 GHz capability of new stationRajkumar Manoharan1-0/+2
Handle 6 GHz HE capability while adding new station. It will be used later in mac80211 station processing. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org [handle nl80211_set_station, require WME, remove NL80211_HE_6GHZ_CAPABILITY_LEN] Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: add a helper to identify 6 GHz PSCsJohannes Berg1-0/+15
This allows identifying whether or not a channel is a PSC (preferred scanning channel). Link: https://lore.kernel.org/r/20200528213443.414363ecf62c.Ic15e681a0e249eab7350a06ceb582cca8bb9a080@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-30Merge tag 'mlx5-cleanup-2020-05-29' of ↵David S. Miller1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-cleanup-2020-05-29 Accumulated cleanup patches and sparse warning fixes for mlx5 driver. 1) sync with mlx5-next branch 2) Eli Cohen declares mpls_entry_encode() helper in mpls.h as suggested by Jakub Kicinski and David Ahern, and use it in mlx5 3) Jesper Fixes xdp data_meta setup in mlx5 4) Many sparse and build warnings cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: Make mpls_entry_encode() available for generic usersEli Cohen1-0/+17
Move mpls_entry_encode() from net/mpls/internal.h to include/net/mpls.h and make it available for other users. Specifically, hardware driver that offload MPLS can benefit from that. Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29tcp: tcp_init_buffer_space can be staticFlorian Westphal1-1/+0
As of commit 98fa6271cfcb ("tcp: refactor setting the initial congestion window") this is called only from tcp_input.c, so it can be static. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29default csum_and_copy_to_user(): don't bother with access_ok()Al Viro1-4/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29take the dummy csum_and_copy_from_user() into net/checksum.hAl Viro1-6/+2
now that can be done conveniently - all non-trivial cases have _HAVE_ARCH_COPY_AND_CSUM_FROM_USER defined, so the fallback in net/checksum.h is used only for dummy (copy_from_user, then csum_partial) implementation. Allowing us to get rid of all dummy instances, both of csum_and_copy_from_user() and csum_partial_copy_from_user(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29net: add a new bind_add methodChristoph Hellwig1-1/+5
The SCTP protocol allows to bind multiple address to a socket. That feature is currently only exposed as a socket option. Add a bind_add method struct proto that allows to bind additional addresses, and switch the dlm code to use the method instead of going through the socket option from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29sctp: add sctp_sock_set_nodelayChristoph Hellwig1-0/+7
Add a helper to directly set the SCTP_NODELAY sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge branch 'master' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-05-29 1) Several fixes for ESP gro/gso in transport and beet mode when IPv6 extension headers are present. From Xin Long. 2) Fix a wrong comment on XFRMA_OFFLOAD_DEV. From Antony Antony. 3) Fix sk_destruct callback handling on ESP in TCP encapsulation. From Sabrina Dubroca. 4) Fix a use after free in xfrm_output_gso when used with vxlan. From Xin Long. 5) Fix secpath handling of VTI when used wiuth IPCOMP. From Xin Long. 6) Fix an oops when deleting a x-netns xfrm interface. From Nicolas Dichtel. 7) Fix a possible warning on policy updates. We had a case where it was possible to add two policies with the same lookup keys. From Xin Long. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge branch 'master' of ↵David S. Miller2-9/+28
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2020-05-29 1) Add IPv6 encapsulation support for ESP over UDP and TCP. From Sabrina Dubroca. 2) Remove unneeded reference when initializing xfrm interfaces. From Nicolas Dichtel. 3) Remove some indirect calls from the state_afinfo. From Florian Westphal. Please note that this pull request has two merge conflicts between commit: 0c922a4850eb ("xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish") from Linus' tree and commit: 2ab6096db2f1 ("xfrm: remove output_finish indirection from xfrm_state_afinfo") from the ipsec-next tree. and between commit: 3986912f6a9a ("ipv6: move SIOCADDRT and SIOCDELRT handling into ->compat_ioctl") from the net-next tree and commit: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") from the ipsec-next tree. Both conflicts can be resolved as done in linux-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 14:15:10 +0000