summaryrefslogtreecommitdiffstats
path: root/include/net/mac80211.h
AgeCommit message (Collapse)AuthorFilesLines
2021-09-27mac80211: Fix Ptk0 rekey documentationAlexander Wetzel1-4/+4
@IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX. Move the requirement to the correct section in the PTK0 rekey documentation. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-24mac80211: introduce individual TWT support in AP modeLorenzo Bianconi1-0/+12
Introduce TWT action frames parsing support to mac80211. Currently just individual TWT agreement are support in AP mode. Whenever the AP receives a TWT action frame from an associated client, after performing sanity checks, it will notify the underlay driver with requested parameters in order to check if they are supported and if there is enough room for a new agreement. The driver is expected to set the agreement result and report it to mac80211. Drivers supporting this have two new callbacks: - add_twt_setup (mandatory) - twt_teardown_request (optional) mac80211 will send an action frame reply according to the result reported by the driver. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org [use le16p_replace_bits(), minor cleanups, use (void *) casts, fix to use ieee80211_get_he_iftype_cap() correctly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-17mac80211: add support for BSS color changeJohn Crispin1-0/+29
The color change announcement is very similar to how CSA works where we have an IE that includes a counter. When the counter hits 0, the new color is applied via an updated beacon. This patch makes the CSA counter functionality reusable, rather than implementing it again. This also allows for future reuse incase support for other counter IEs gets added. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/057c1e67b82bee561ea44ce6a45a8462d3da6995.1625247619.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: Switch to a virtual time-based airtime schedulerToke Høiland-Jørgensen1-14/+3
This switches the airtime scheduler in mac80211 to use a virtual time-based scheduler instead of the round-robin scheduler used before. This has a couple of advantages: - No need to sync up the round-robin scheduler in firmware/hardware with the round-robin airtime scheduler. - If several stations are eligible for transmission we can schedule both of them; no need to hard-block the scheduling rotation until the head of the queue has used up its quantum. - The check of whether a station is eligible for transmission becomes simpler (in ieee80211_txq_may_transmit()). The drawback is that scheduling becomes slightly more expensive, as we need to maintain an rbtree of TXQs sorted by virtual time. This means that ieee80211_register_airtime() becomes O(logN) in the number of currently scheduled TXQs because it can change the order of the scheduled stations. We mitigate this overhead by only resorting when a station changes position in the tree, and hopefully N rarely grows too big (it's only TXQs currently backlogged, not all associated stations), so it shouldn't be too big of an issue. To prevent divisions in the fast path, we maintain both station sums and pre-computed reciprocals of the sums. This turns the fast-path operation into a multiplication, with divisions only happening as the number of active stations change (to re-compute the current sum of all active station weights). To prevent this re-computation of the reciprocal from happening too frequently, we use a time-based notion of station activity, instead of updating the weight every time a station gets scheduled or de-scheduled. As queues can oscillate between empty and occupied quite frequently, this can significantly cut down on the number of re-computations. It also has the added benefit of making the station airtime calculation independent on whether the queue happened to have drained at the time an airtime value was accounted. Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20210623134755.235545-1-toke@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg1-3/+25
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add to bss_conf if broadcast TWT is supportedShaul Triebitz1-1/+3
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: move A-MPDU session check from minstrel_ht to mac80211Felix Fietkau1-0/+5
This avoids calling back into tx handlers from within the rate control module. Preparation for deferring rate control until tx dequeue Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210617163113.75815-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add ieee80211_is_tx_data helper functionPhilipp Borgers1-0/+18
Add a helper function that checks if a frame is a data frame. Frames with hardware encapsulation enabled are data frames. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210519122019.92359-2-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-31mac80211: Fix NULL ptr deref for injected rate infoMathy Vanhoef1-1/+6
The commit cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") moved the code to validate the radiotap header from ieee80211_monitor_start_xmit to ieee80211_parse_tx_radiotap. This made is possible to share more code with the new Tx queue selection code for injected frames. But at the same time, it now required the call of ieee80211_parse_tx_radiotap at the beginning of functions which wanted to handle the radiotap header. And this broke the rate parser for radiotap header parser. The radiotap parser for rates is operating most of the time only on the data in the actual radiotap header. But for the 802.11a/b/g rates, it must also know the selected band from the chandef information. But this information is only written to the ieee80211_tx_info at the end of the ieee80211_monitor_start_xmit - long after ieee80211_parse_tx_radiotap was already called. The info->band information was therefore always 0 (NL80211_BAND_2GHZ) when the parser code tried to access it. For a 5GHz only device, injecting a frame with 802.11a rates would cause a NULL pointer dereference because local->hw.wiphy->bands[NL80211_BAND_2GHZ] would most likely have been NULL when the radiotap parser searched for the correct rate index of the driver. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Fixes: cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> [sven@narfation.org: added commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20210530133226.40587-1-sven@narfation.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-31mac80211: correct ieee80211_iterate_active_interfaces_mtx() locking commentsBrian Norris1-1/+1
Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") dropped usage of RTNL here and replaced it with hw->wiphy->mutex. But we didn't update the comments. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20210505202829.1039400-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: make ieee80211_vif_to_wdev work when the vif isn't in the driverEmmanuel Grumbach1-4/+1
This will allow the low level driver to get the wdev during the add_interface flow. In order to do that, remove a few checks from there and do not return NULL for vifs that were not yet added to the driver. Note that all the current callers of this helper function assume that the vif already exists: - The callers from the drivers already have a vif pointer. Before this change, ieee80211_vif_to_wdev would return NULL in some cases, but those callers don't even check they get a non-NULL pointer from ieee80211_vif_to_wdev. - The callers from net/mac80211/cfg.c assume the vif is already added to the driver as well. So, this change has no impact on existing callers of this helper function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.6078d3517095.I1907a45f267a62dab052bcc44428aa7a2005ffc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: Allow concurrent monitor iface and ethernet rx decapSriram R1-0/+7
Some HW/driver can support passing ethernet rx decap frames and raw 802.11 frames for the monitor interface concurrently and via separate RX calls to mac80211. Packets going to the monitor interface(s) would be in 802.11 format and thus not have the RX_FLAG_8023 set, and 802.11 format monitoring frames should have RX_FLAG_ONLY_MONITOR set. Drivers doing such can enable the SUPPORTS_CONC_MON_RX_DECAP to allow using ethernet decap offload while a monitor interface is active, currently RX decapsulation offload gets disabled when a monitor interface is added. Signed-off-by: Sriram R <srirrama@codeaurora.org> Link: https://lore.kernel.org/r/1617068116-32253-1-git-send-email-srirrama@codeaurora.org [add proper documentation, rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-5/+5
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21mac80211: add rx decapsulation offload supportFelix Fietkau1-0/+16
This allows drivers to pass 802.3 frames to mac80211, with some restrictions: - the skb must be passed with a valid sta - fast-rx needs to be active for the sta - monitor mode needs to be disabled mac80211 will tell the driver when it is safe to enable rx decap offload for a particular station. In order to implement support, a driver must: - call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD) - implement ops->sta_set_decap_offload - mark 802.3 frames with RX_FLAG_8023 If it doesn't want to enable offload for some vif types, it can mask out IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the .add_interface or .update_vif_offload driver ops Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-08cfg80211/mac80211: fix kernel-doc for SAR APIsJohannes Berg1-0/+1
A stray @ caused the kernel-doc parser to not understand this, fix that. Also add some missing kernel-doc. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 6bdb68cef7bf ("nl80211: add common API to configure SAR power limitations") Fixes: c534e093d865 ("mac80211: add ieee80211_set_sar_specs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build only Link: https://lore.kernel.org/r/20210106234740.96827c18f9bd.I8b9f0a9cbfe186931ef9640046f414371f216914@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: add ieee80211_set_sar_specsCarl Huang1-0/+2
This change registers ieee80211_set_sar_specs to mac80211_config_ops, so cfg80211 can call it. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Link: https://lore.kernel.org/r/20201203103728.3034-3-cjhuang@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support driver-based disconnect with reconnect hintJohannes Berg1-0/+11
Support the driver indicating that a disconnection needs to be performed, and pass through the reconnect hint in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.5c8dab7a22a0.I58459fdf6968b16c90cab9c574f0f04ca22b0c79@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support MIC error/replay detected counters driver updateJohannes Berg1-0/+20
Support the driver incrementing MIC error and replay detected counters when having detected a bad frame, if it drops it directly instead of relying on mac80211 to do the checks. These are then exposed to userspace, though currently only in some cases and in debugfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.fb59be9c6de8.Ife2260887366f585afadd78c983ebea93d2bb54b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: he: remove non-bss-conf fields from bss_confShaul Triebitz1-2/+0
ack_enabled and multi_sta_back_32bit are station capabilities and should not be in the bss_conf structure. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.69a7f7753444.I405c4b5245145e24577512c477f19131d4036489@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-13Merge tag 'mac80211-next-for-net-next-2020-11-13' of ↵Jakub Kicinski1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some updates: * injection/radiotap updates for new test capabilities * remove WDS support - even years ago when we turned it off by default it was already basically unusable * support for HE (802.11ax) rates for beacons * support for some vendor-specific HE rates * many other small features/cleanups * tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits) nl80211: fix kernel-doc warning in the new SAE attribute cfg80211: remove WDS code mac80211: remove WDS-related code rt2x00: remove WDS code b43legacy: remove WDS code b43: remove WDS code carl9170: remove WDS code ath9k: remove WDS code wireless: remove CONFIG_WIRELESS_WDS mac80211: assure that certain drivers adhere to DONT_REORDER flag mac80211: don't overwrite QoS TID of injected frames mac80211: adhere to Tx control flag that prevents frame reordering mac80211: add radiotap flag to assure frames are not reordered mac80211: save HE oper info in BSS config for mesh cfg80211: add support to configure HE MCS for beacon rate nl80211: fix beacon tx rate mask validation nl80211/cfg80211: fix potential infinite loop cfg80211: Add support to calculate and report 4096-QAM HE rates cfg80211: Add support to configure SAE PWE value to drivers ieee80211: Add definition for WFA DPP ... ==================== Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06mac80211: add radiotap flag to assure frames are not reorderedMathy Vanhoef1-0/+4
Add a new radiotap flag to indicate injected frames must not be reordered relative to other frames that also have this flag set, independent of priority field values in the transmitted frame. Parse this radiotap flag and define and set a corresponding Tx control flag. Note that this flag has recently been standardized as part of an update to radiotap. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20201104061823.197407-2-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-06mac80211: save HE oper info in BSS config for meshPradeep Kumar Chitrapu1-1/+2
Currently he_support is set only for AP mode. Storing this information for mesh BSS as well helps driver to determine HE support. Also save HE operation element params in BSS conf so that drivers can access this for any configurations instead of having to parse the beacon to fetch that info. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-2-pradeepc@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: fix kernel-doc markupsMauro Carvalho Chehab1-3/+4
Some identifiers have different names between their prototypes and the kernel-doc markup. Others need to be fixed, as kernel-doc markups should use this format: identifier - description In the specific case of __sta_info_flush(), add a documentation for sta_info_flush(), as this one is the one used outside sta_info.c. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/978d35eef2dc76e21c81931804e4eaefbd6d635e.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: copy configured beacon tx rate to driverRajkumar Manoharan1-0/+3
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. This information needs to be passed to the driver when the rate control is offloaded to the firmware. The driver capability of allowing beacon rate is already validated in cfg80211, so simply passing the rate information to the driver is enough. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1601762658-15627-1-git-send-email-rmanohar@codeaurora.org [adjust commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Support not iterating over not-sdata-in-driver ifacesBen Greear1-0/+4
Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen1-0/+2
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: handle S1G low ratesThomas Pedersen1-0/+2
S1G doesn't have legacy (sband->bitrates) rates, only MCS. For now, just send a frame at MCS 0 if a low rate is requested. Note we also redefine (since we're out of TX flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G MCS. This is probably OK as VHT MCS is not valid on S1G band and vice versa. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: fix some encapsulation offload kernel-docJohannes Berg1-1/+3
Add a missing kernel-doc entry for the offload_flags, and correct the name of the update_vif_offload method. Link: https://lore.kernel.org/r/20200918132115.d46a0915ba8a.Ibba536d04a5a5fb655f8ef6e51b247457bfda4ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Unsolicited broadcast probe response supportAloka Dixit1-0/+20
This patch adds mac80211 support to configure unsolicited broadcast probe response transmission for in-band discovery in 6GHz. Changes include functions to store and retrieve probe response template, and packet interval (0 - 20 TUs). Setting interval to 0 disables the unsolicited broadcast probe response transmission. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747a946b35-ad25858a-1f1f-48df-909e-dc7bf26d9169-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Add FILS discovery supportAloka Dixit1-0/+27
This patch adds mac80211 support to configure FILS discovery transmission. Changes include functions to store and retrieve FILS discovery template, minimum and maximum packet intervals. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20200805011838.28166-3-alokad@codeaurora.org [remove SUPPORTS_FILS_DISCOVERY, driver can just set wiphy info] Link: https://lore.kernel.org/r/010101747a7b3cbb-6edaa89c-436d-4391-8765-61456d7f5f4e-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend ieee80211_tx_status_ext to support bulk freeFelix Fietkau1-0/+2
Store processed skbs ready to be freed in a list so the driver bulk free them Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-13-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau1-0/+4
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau1-7/+7
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau1-2/+3
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau1-0/+29
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin1-18/+17
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: add a function for running rx without passing skbs to the stackFelix Fietkau1-0/+25
This can be used to run mac80211 rx processing on a batch of frames in NAPI poll before passing them to the network stack in a large batch. This can improve icache footprint, or it can be used to pass frames via netif_receive_skb_list. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200726110611.46886-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: parse radiotap header when selecting Tx queueMathy Vanhoef1-0/+8
Already parse the radiotap header in ieee80211_monitor_select_queue. In a subsequent commit this will allow us to add a radiotap flag that influences the queue on which injected packets will be sent. This also fixes the incomplete validation of the injected frame in ieee80211_monitor_select_queue: currently an out of bounds memory access may occur in in the called function ieee80211_select_queue_80211 if the 802.11 header is too small. Note that in ieee80211_monitor_start_xmit the radiotap header is parsed again, which is necessairy because ieee80211_monitor_select_queue is not always called beforehand. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: add radiotap flag to prevent sequence number overwriteMathy Vanhoef1-0/+3
The radiotap specification contains a flag to indicate that the sequence number of an injected frame should not be overwritten. Parse this flag and define and set a corresponding Tx control flag. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-2-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31net/wireless: mac80211.h: drop duplicate words in commentsRandy Dunlap1-3/+3
Drop doubled words "are" and "by" in comments. Change doubled "to to" to "to the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: netdev@vger.kernel.org Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/20200715164325.9109-4-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg1-1/+3
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-5/+5
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185907.GA15102@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller1-5/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29mac80211: fix memory overlap due to variable length paramRajkumar Manoharan1-2/+5
As of now HE operation element in bss_conf includes variable length optional field followed by other HE variable. Though the optional field never be used, actually it is referring to next member of the bss_conf structure which is not correct. Fix it by declaring needed HE operation fields within bss_conf itself. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1587768108-25248-2-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: fix two missing documentation entriesJohannes Berg1-0/+2
Add documentation for two struct entries that was missing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200424123945.6b23a26ab5e7.I664440ab5f33442df8103253bf5b9fe84be8d58c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: add freq_offset to RX statusThomas Pedersen1-1/+9
RX status needs a KHz component, so add freq_offset. We can reduce the bits for the frequency since 60 GHz isn't supported. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-5-thomas@adapt-ip.com [fix commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: agg-tx: add an option to defer ADDBA transmitMordechay Goodstein1-1/+5
Driver tells mac80211 to sends ADDBA with SSN (starting sequence number) from the head of the queue, while the transmission of all the frames in the queue may take a while, which causes the peer to time out. In order to fix this scenario, add an option to defer ADDBA transmit until queue is drained. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.0f27423fec75.If67daab123a27c1cbddef000d6a3f212aa6309ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: add twt_protected flag to the bss_conf structureShaul Triebitz1-0/+2
Add a flag to the BSS conf whether the BSS and STA support protected TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.1dcb2d16fa74.I74d7c007dad2601d2e39f54612fe6554dd5ab386@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Process multicast RX registration for Action framesJouni Malinen1-0/+6
Convert a user space registration for processing multicast Action frames (NL80211_CMD_REGISTER_FRAME with NL80211_ATTR_RECEIVE_MULTICAST) to a new enum ieee80211_filter_flags bit FIF_MCAST_ACTION so that drivers can update their RX filter parameters appropriately, if needed. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200421144815.19175-1-jouni@codeaurora.org [rename variables to rx_mcast_action_reg indicating action frames only] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg1-1/+1
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-23 02:14:04 +0000