summaryrefslogtreecommitdiffstats
path: root/include/net/l3mdev.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-20l3mdev: add infrastructure for table to VRF mappingAndrea Mayer1-0/+39
Add infrastructure to l3mdev (the core code for Layer 3 master devices) in order to find out the corresponding VRF device for a given table id. Therefore, the l3mdev implementations: - can register a callback that returns the device index of the l3mdev associated with a given table id; - can offer the lookup function (table to VRF device). Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30ipvlan, l3mdev: fix broken l3s mode wrt local routesDaniel Borkmann1-1/+2
While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03l3mdev: add function to retreive upper masterAlexis Bauvin1-0/+22
Existing functions to retreive the l3mdev of a device did not walk the master chain to find the upper master. This patch adds a function to find the l3mdev, even indirect through e.g. a bridge: +----------+ | | | vrf-blue | | | +----+-----+ | | +----+-----+ | | | br-blue | | | +----+-----+ | | +----+-----+ | | | eth0 | | | +----------+ This will properly resolve the l3mdev of eth0 to vrf-blue. Signed-off-by: Alexis Bauvin <abauvin@scaleway.com> Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Amine Kherbouche <akherbouche@scaleway.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: ipv4: Do not drop to make_route if oif is l3mdevDavid Ahern1-0/+24
Commit e0d56fdd7342 was a bit aggressive removing l3mdev calls in the IPv4 stack. If the fib_lookup fails we do not want to drop to make_route if the oif is an l3mdev device. Also reverts 19664c6a0009 ("net: l3mdev: Remove netif_index_is_l3_master") which removed netif_index_is_l3_master. Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net: l3mdev: Remove netif_index_is_l3_masterDavid Ahern1-24/+0
No longer used after e0d56fdd73422 ("net: l3mdev: remove redundant calls") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: remove get_rtable methodDavid Ahern1-21/+0
No longer used Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Remove l3mdev_fib_oifDavid Ahern1-29/+0
No longer used Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ipv6: Remove l3mdev_get_saddr6David Ahern1-11/+0
No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ipv4: Remove l3mdev_get_saddrDavid Ahern1-12/+0
No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: vrf: Flip IPv6 output path from FIB lookup hook to out hookDavid Ahern1-4/+4
Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Allow the l3mdev to be a loopbackDavid Ahern1-3/+3
Allow an L3 master device to act as the loopback for that L3 domain. For IPv4 the device can also have the address 127.0.0.1. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Add hook to output pathDavid Ahern1-0/+48
This patch adds the infrastructure to the output path to pass an skb to an l3mdev device if it has a hook registered. This is the Tx parallel to l3mdev_ip{6}_rcv in the receive path and is the basis for removing the existing hook that returns the vrf dst on the fib lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: flow: Add l3mdev flow updateDavid Ahern1-0/+6
Add l3mdev hook to set FLOWI_FLAG_SKIP_NH_OIF flag and update oif/iif in flow struct if its oif or iif points to a device enslaved to an L3 Master device. Only 1 needs to be converted to match the l3mdev FIB rule. This moves the flow adjustment for l3mdev to a single point catching all lookups. It is redundant for existing hooks (those are removed in later patches) but is needed for missed lookups such as PMTU updates. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ipv6: Address selection needs to consider L3 domainsDavid Ahern1-0/+31
IPv6 version of 3f2fb9a834cb ("net: l3mdev: address selection should only consider devices in L3 domain") and the follow up commit, a17b693cdd876 ("net: l3mdev: prefer VRF master for source address selection"). That is, if outbound device is given then the address preference order is an address from that device, an address from the master device if it is enslaved, and then an address from a device in the same L3 domain. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: vrf: Implement get_saddr for IPv6David Ahern1-0/+11
IPv6 source address selection needs to consider the real egress route. Similar to IPv4 implement a get_saddr6 method which is called if source address has not been set. The get_saddr6 method does a full lookup which means pulling a route from the VRF FIB table and properly considering linklocal/multicast destination addresses. Lookup failures (eg., unreachable) then cause the source address selection to fail which gets propagated back to the caller. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15net: l3mdev: Remove const from flowi6 arg to get_rt6_dstDavid Ahern1-3/+3
Allow drivers to pass flow arg to functions where the arg is not const and allow the driver to make updates as needed (eg., setting oif). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: Add l3mdev ruleDavid Ahern1-0/+12
Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: l3mdev: Add hook in ip and ipv6David Ahern1-0/+42
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: l3mdev: Move get_saddr and rt6_dstDavid Ahern1-53/+3
Move l3mdev_rt6_dst_by_oif and l3mdev_get_saddr to l3mdev.c. Collapse l3mdev_get_rt6_dst into l3mdev_rt6_dst_by_oif since it is the only user and keep the l3mdev_get_rt6_dst name for consistency with other hooks. A follow-on patch adds more code to these functions making them long for inlined functions. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26net: l3mdev: address selection should only consider devices in L3 domainDavid Ahern1-2/+2
David Lamparter noted a use case where the source address selection fails to pick an address from a VRF interface - unnumbered interfaces. Relevant commands from his script: ip addr add 9.9.9.9/32 dev lo ip link set lo up ip link add name vrf0 type vrf table 101 ip rule add oif vrf0 table 101 ip rule add iif vrf0 table 101 ip link set vrf0 up ip addr add 10.0.0.3/32 dev vrf0 ip link add name dummy2 type dummy ip link set dummy2 master vrf0 up --> note dummy2 has no address - unnumbered device ip route add 10.2.2.2/32 dev dummy2 table 101 ip neigh add 10.2.2.2 dev dummy2 lladdr 02:00:00:00:00:02 tcpdump -ni dummy2 & And using ping instead of his socat example: $ ping -I vrf0 -c1 10.2.2.2 ping: Warning: source address might be selected on device other than vrf0. PING 10.2.2.2 (10.2.2.2) from 9.9.9.9 vrf0: 56(84) bytes of data. >From tcpdump: 12:57:29.449128 IP 9.9.9.9 > 10.2.2.2: ICMP echo request, id 2491, seq 1, length 64 Note the source address is from lo and is not a VRF local address. With this patch: $ ping -I vrf0 -c1 10.2.2.2 PING 10.2.2.2 (10.2.2.2) from 10.0.0.3 vrf0: 56(84) bytes of data. >From tcpdump: 12:59:25.096426 IP 10.0.0.3 > 10.2.2.2: ICMP echo request, id 2113, seq 1, length 64 Now the source address comes from vrf0. The ipv4 function for selecting source address takes a const argument. Removing the const requires touching a lot of places, so instead l3mdev_master_ifindex_rcu is changed to take a const argument and then do the typecast to non-const as required by netdev_master_upper_dev_get_rcu. This is similar to what l3mdev_fib_table_rcu does. IPv6 for unnumbered interfaces appears to be selecting the addresses properly. Cc: David Lamparter <david@opensourcerouting.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+10
2016-01-04net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern1-6/+10
Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-18net: l3mdev: Add master device lookup by indexDavid Ahern1-0/+23
Add helper to lookup l3mdev master index given a device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Add IPv6 support to l3mdevDavid Ahern1-0/+46
Add operations to retrieve cached IPv6 dst entry from l3mdev device and lookup IPv6 source address. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add source address lookup op for VRFDavid Ahern1-0/+27
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Move netif_index_is_l3_master to l3mdev.hDavid Ahern1-0/+24
Change CONFIG dependency to CONFIG_NET_L3_MASTER_DEV as well. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Introduce L3 Master device abstractionDavid Ahern1-0/+125
L3 master devices allow users of the abstraction to influence FIB lookups for enslaved devices. Current API provides a means for the master device to return a specific FIB table for an enslaved device, to return an rtable/custom dst and influence the OIF used for fib lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>