summaryrefslogtreecommitdiffstats
path: root/include/net/dsa.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-13net: dsa: Support prepended Broadcom tagFlorian Fainelli1-0/+1
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli1-1/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown treeVivien Didelot1-1/+1
This commit provides better scope for the DSA tree setup and teardown functions. It renames the "applied" bool to "setup" and print a message when the tree is setup, as it is done during teardown. At the same time, check dst->setup in dsa_tree_setup, where it is set to true. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: constify cpu_dp member of dsa_portVivien Didelot1-1/+1
A DSA port has a dedicated CPU port assigned to it, stored in the cpu_dp member. It is not meant to be modified by a port, thus make it const. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05net: dsa: make tree index unsignedVivien Didelot1-1/+1
Similarly to a DSA switch and port, rename the tree index from "tree" to "index" and make it an unsigned int because it isn't supposed to be less than 0. u32 is an OF specific data used to retrieve the value and has no need to be propagated up to the tree index. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05net: dsa: make switch index unsignedVivien Didelot1-1/+1
Define the DSA switch index as an unsigned int, because it will never be less than 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: remove port masksVivien Didelot1-3/+0
Now that DSA core provides port types, there is no need to keep this information at the switch level. This is a static information that is part of a DSA core dsa_port structure. Remove them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: use new port type in helpersVivien Didelot1-11/+16
Now that DSA exposes an enumerated type for the ports, we can use them directly instead of checking bitmaps, which is more consistent. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: define port typesVivien Didelot1-0/+7
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: introduce dsa_user_ports helperVivien Didelot1-0/+5
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: rename dsa_is_normal_port helperVivien Didelot1-1/+1
This patch renames dsa_is_normal_port to dsa_is_user_port because "user" is the correct term in the DSA terminology, not "normal". Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: fix dsa_is_normal_port helperVivien Didelot1-1/+1
In order to know if a port is of type user, dsa_is_normal_port checks that the given port is not of type DSA nor CPU. This is not enough because a port can be unused. Without the previous fix, this caused the unused mv88e6xxx ports to be configured in normal mode. The ds->enabled_port_mask reports the user ports, so check this instead. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: add dsa_is_unused_port helperVivien Didelot1-0/+7
As the comment above the chunk states, the b53 driver attempts to disable the unused ports. But using ds->enabled_port_mask is misleading, because this mask reports in fact the user ports. To avoid confusion and fix this, this patch introduces an explicit dsa_is_unused_port helper which ensures the corresponding bit is not masked in any of the switch port masks. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: add dsa_to_port helperVivien Didelot1-0/+5
The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: split dsa_port's netdev memberVivien Didelot1-1/+8
The dsa_port structure has a "netdev" member, which can be used for either the master device, or the slave device, depending on its type. It is true that today, CPU port are not exposed to userspace, thus the port's netdev member can be used to point to its master interface. But it is still slightly confusing, so split it into more explicit "master" and "slave" members inside an anonymous union. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: remove .set_addrVivien Didelot1-1/+0
Now that there is no user for the .set_addr function, remove it from DSA. If a switch supports this feature (like mv88e6xxx), the implementation can be done in the driver setup. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: tag_brcm: Indicate to master netdevice port + queueFlorian Fainelli1-0/+5
We need to tell the DSA master network device doing the actual transmission what the desired switch port and queue number is for it to resolve that to the internal transmit queue it is mapped to. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: Add support for DSA specific notifiersFlorian Fainelli1-0/+45
In preparation for communicating a given DSA network device's port number and switch index, create a specialized DSA notifier and two events: DSA_PORT_REGISTER and DSA_PORT_UNREGISTER that communicate: the slave network device (slave_dev), port number and switch number in the tree. This will be later used for network device drivers like bcmsysport which needs to cooperate with its DSA network devices to set-up queue mapping and scheduling. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: remove tag ops from the switch treeVivien Didelot1-11/+0
Now that the dsa_ptr is a dsa_port instance, there is no need to keep the tag operations in the dsa_switch_tree structure. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: prepare master receive hot pathVivien Didelot1-0/+5
In preparation to make DSA master devices point to their corresponding CPU port instead of the whole tree, add copies of dst and rcv in the dsa_port structure so that we keep fast access in the receive hot path. Also keep the copies at the beginning of the dsa_port structure in order to ensure they are available in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add tagging ops to portVivien Didelot1-0/+3
The DSA tagging protocol operations are specific to each CPU port, thus the dsa_device_ops pointer belongs to the dsa_port structure. >From now on assign a slave's xmit copy from its CPU port tagging operations. This will ease the future support for multiple CPU ports. Also keep the tag_ops at the beginning of the dsa_port structure so that we ensure copies for hot path are in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: remove copy of master ethtool_opsVivien Didelot1-1/+0
There is no need to store a copy of the master ethtool ops, storing the original pointer in DSA and the new one in the master netdev itself is enough. In the meantime, set orig_ethtool_ops to NULL when restoring the master ethtool ops and check the presence of the master original ethtool ops as well as its needed functions before calling them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05net: dsa: Allow switch drivers to indicate number of TX queuesFlorian Fainelli1-0/+3
Let switch drivers indicate how many TX queues they support. Some switches, such as Broadcom Starfighter 2 are designed with 8 egress queues. Future changes will allow us to leverage the queue mapping and direct the transmission towards a particular queue. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21dsa: remove unused net_device arg from handlersFlorian Westphal1-4/+2
compile tested only, but saw no warnings/errors with allmodconfig build. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net-next: dsa: add flow_dissect callback to struct dsa_device_opsJohn Crispin1-0/+2
When the flow dissector first sees packets coming in on a DSA devices the 802.3 header wont be located where the code expects it to be as the tag is still present. Adding this new callback allows a DSA device to provide a new function that the flow_dissector can use to get the correct protocol and offset of the network header. Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net-next: dsa: move struct dsa_device_ops to the global header fileJohn Crispin1-0/+7
We need to access this struct from within the flow_dissector to fix dissection for packets coming in on DSA devices. Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky1-2/+3
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove redundant MDB dump supportArkadi Sharshevsky1-4/+0
Currently the MDB HW database is synced with the bridge's one, thus, There is no need to support special dump functionality. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for bypass bridge port attributes/vlan setArkadi Sharshevsky1-4/+0
The bridge port attributes/vlan for DSA devices should be set only from bridge code. Furthermore, The vlans are synced totally with the bridge so there is no need for special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove prepare phase for FDBArkadi Sharshevsky1-3/+1
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Change DSA slave FDB API to be switchdev independentArkadi Sharshevsky1-5/+3
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: rename switch EEE opsVivien Didelot1-5/+5
To avoid confusion with the PHY EEE settings, rename the .set_eee and .get_eee ops to respectively .set_mac_eee and .get_mac_eee. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: remove PHY device argument from .set_eeeVivien Didelot1-1/+0
The DSA switch operations for EEE are only meant to configure a port's MAC EEE settings. The port's PHY EEE settings are accessed by the DSA layer and must be made available via a proper PHY driver. In order to reduce this confusion, remove the phy_device argument from the .set_eee operation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19net: dsa: unexport dsa_is_port_initializedVivien Didelot1-5/+0
The dsa_is_port_initialized helper is only used by dsa_switch_resume and dsa_switch_suspend, if CONFIG_PM_SLEEP is enabled. Make it static to dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Associate slave network device with CPU portFlorian Fainelli1-0/+1
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Relocate master ethtool operationsFlorian Fainelli1-12/+5
Relocate master_ethtool_ops and master_orig_ethtool_ops into struct dsa_port in order to be both consistent, and make things self contained within the dsa_port structure. This is a preliminary change to supporting multiple CPU port interfaces. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli1-5/+0
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: dsa: Initialize all CPU and enabled ports masks in dsa_ds_parse()Florian Fainelli1-1/+1
There was no reason for duplicating the code that initializes ds->enabled_port_mask in both dsa_parse_ports_dn() and dsa_parse_ports(), instead move this to dsa_ds_parse() which is early enough before ops->setup() has run. While at it, we can now make dsa_is_cpu_port() check ds->cpu_port_mask which is a step towards being multi-CPU port capable. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: remove dsa_uses_tagged_protocolVivien Didelot1-7/+1
Since dev->dsa_ptr is a pointer to a dsa_switch_tree, there is no need to have another inline helper just to check rcv. Remove dsa_uses_tagged_protocol and check dsa_ptr && dsa_ptr->rcv together at the same time. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: comment hot path requirementsVivien Didelot1-0/+3
The DSA layer uses inline helpers and copy of the tagging functions for faster access in hot path. Add comments to detail that. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31dsa: add support for Microchip KSZ tail taggingWoojung Huh1-0/+1
Adding support for the Microchip KSZ switch family tail tagging. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: remove dev arg of dsa_register_switchVivien Didelot1-1/+1
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move notifier info to private headerVivien Didelot1-10/+0
The DSA notifier events and info structure definitions are not meant for DSA drivers and users, but only used internally by the DSA core files. Move them from the public net/dsa.h file to the private dsa_priv.h file. Also use this opportunity to turn the events into an anonymous enum, because we don't care about the values, and this will prevent future conflicts when adding (and sorting) new events. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: use switchdev_obj_dump_cb_t everywhereVivien Didelot1-3/+3
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot1-6/+1
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn1-4/+4
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-7/+6
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: add support for the SMSC-LAN9303 tagging formatJuergen Beisert1-0/+1
To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: dsa: isolate legacy codeVivien Didelot1-1/+3
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08net: dsa: Factor bottom tag receive functionsFlorian Fainelli1-1/+1
All DSA tag receive functions do strictly the same thing after they have located the originating source port from their tag specific protocol: - push ETH_HLEN bytes - set pkt_type to PACKET_HOST - call eth_type_trans() - bump up counters - call netif_receive_skb() Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to a sk_buff, which makes us symetric with the xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 20:11:18 +0000