summaryrefslogtreecommitdiffstats
path: root/include/net/bluetooth/hci.h
AgeCommit message (Collapse)AuthorFilesLines
2013-06-23Bluetooth: Remove unneeded flagAndrei Emeltchenko1-1/+0
Remove HCI_LINK_KEYS flag since using HCI_MGMT is enough for test that user space expects the kernel managing link keys. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Rename LE_SCANNING_* macrosAndre Guedes1-2/+2
This patch renames LE_SCANNING_ENABLED and LE_SCANNING_DISABLED macros to LE_SCAN_ENABLE and LE_SCAN_DISABLE in order to keep the same prefix others LE scan macros have. It also fixes le_scan_enable_req function so it uses the LE_SCAN_ ENABLE macro instead of a magic number. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Add macros for filter duplicates valuesAndre Guedes1-0/+2
This patch adds macros for filter_duplicates parameter values from HCI LE Set Scan Enable command. It also fixes le_scan_enable_req function so it uses the LE_SCAN_FILTER_DUP_ENABLE macro instead of a magic number. The LE_SCAN_FILTER_DUP_DISABLE was also defined since it will be required to properly support the GAP Observer Role. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Add LE scan type macrosAndre Guedes1-0/+3
This patch adds macros for active and passive LE scan type values. The LE_SCAN_PASSIVE was also defined since it will be used in future by LE connection routine and GAP Observer Role support. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-18Bluetooth: Add reading of page scan parametersJohan Hedberg1-0/+13
These parameters are related to the "fast connectable" mode that can be changed through the mgmt interface. Not all controllers properly reset these values with HCI_Reset so they need to be read in order to be able to verify whether the values are correct or not before enabling page scan. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-18Bluetooth: Add proper flag for fast connectable modeJohan Hedberg1-1/+3
In order to be able to represent fast connectable mode in the mgmt settings we need to have a HCI dev flag for it. This patch adds the flag and makes sure its value is changed whenever a mgmt_set_fast_connectable command completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-18Bluetooth: Add a define for the HCI persistent flags maskJohan Hedberg1-0/+5
We'll need to use this mask also when powering off the HCI device so it's better to have this in a single and visible place. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-18Bluetooth: Remove useless HCI_PENDING_CLASS flagJohan Hedberg1-1/+0
Now that class related operations are tracked through asynchronous HCI requests this flag is no longer needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-23Bluetooth: Add support for reading LE supported statesJohan Hedberg1-0/+6
The LE supported states indicate the states and state combinations that the link layer supports. This is important information for knowing what operations are possible when dealing with multiple connected devices. This patch adds reading of the supported states to the HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-23Bluetooth: Add support for reading LE White List SizeJohan Hedberg1-0/+6
The LE White List Size is necessary to be known before attempting to feed the controller with any addresses intended for the white list. This patch adds the necessary HCI command sending to the HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-23Bluetooth: Add LE Local Features reading supportJohan Hedberg1-0/+6
To be able to make the appropriate decisions for some LE procedures we need to know the LE features that the local controller supports. Therefore, it's important to have the LE Read Local Supported Features HCI comand as part of the HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19Bluetooth: Increase HCI command tx timeoutSzymon Janc1-1/+1
Read Local OOB Data command can take more than 1 second on some chips. e.g. on CSR 0a12:0001 first call to Read Local OOB Data after reset takes about 1300ms resulting in tx timeout error. [27698.368655] Bluetooth: hci0 command 0x0c57 tx timeout 2012-10-31 15:53:36.178585 < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 2012-10-31 15:53:37.496996 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 status 0x00 hash 0x92219d9b447f2aa9dc12dda2ae7bae6a randomizer 0xb1948d0febe4ea38ce85c4e66313beba Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Fix updating advertising state flags and dataJohan Hedberg1-0/+2
This patch adds a callback for the HCI_LE_Set_Advertise_Enable command. The callback is responsible for updating the HCI_LE_PERIPHERAL flag updating as well as updating the advertising data flags field to indicate undirected connectable advertising. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Add support for setting LE advertising dataJohan Hedberg1-0/+15
This patch adds support for setting basing LE advertising data. The three elements supported for now are the advertising flags, the TX power and the friendly name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-18Bluetooth: Use proper invalid value for tx_powerJohan Hedberg1-0/+3
The core specification defines 127 as the "not available" value (well, "reserved" for BR/EDR and "not available" for LE - but essentially the same). Therefore, instead of testing for 0 (which is in fact a valid value) we should be using this invalid value to test if the tx_power is available. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Add flag for LE GAP Peripheral roleJohan Hedberg1-0/+1
This patch adds a flag to be used for LE GAP Peripheral role. In this role undirected advertising will be enabled and operations not allowed in Peripheral role (such as scanning and initiating connections) will be disallowed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24Bluetooth: Read adversiting channel TX power during init sequenceJohan Hedberg1-0/+6
This patch adds the reading of the LE advertising channel TX power to the HCI init sequence of LE-capable controllers. This data will be used e.g. for inclusion in the advertising data packets when advertising is enabled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: AMP: Handle complete frames in l2capAndrei Emeltchenko1-0/+1
Check flags type in switch statement and handle new frame type ACL_COMPLETE used for High Speed data over AMP. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Physical link struct and helpersAndrei Emeltchenko1-0/+1
Define physical link structures. Physical links are represented by hci_conn structure. For BR/EDR we use type ACL_LINK and for AMP we use AMP_LINK. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read Loc AMP AssocAndrei Emeltchenko1-0/+2
When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc HCI command to AMP controller. If the AMP Assoc data is larger than it can fit to HCI event only fragment is read. When all fragments are read send A2MP Get AMP Assoc Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Add HCI logical link cmds definitionsAndrei Emeltchenko1-1/+35
Add a few definitions to hci.h Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-18Bluetooth: mgmt: Implement support for passkey notificationJohan Hedberg1-0/+18
This patch adds support for Secure Simple Pairing with devices that have KeyboardOnly as their IO capability. Such devices will cause a passkey notification on our side and optionally also keypress notifications. Without this patch some keyboards cannot be paired using the mgmt interface. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-21Bluetooth: Add more HCI error codesMikel Astiz1-0/+3
Add more HCI error codes as defined in the specification. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix hci_le_conn_complete_evtAndre Guedes1-0/+2
We need to check the 'Role' parameter from the LE Connection Complete Event in order to properly set 'out' and 'link_mode' fields from hci_conn structure. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Define AMP controller statusesAndrei Emeltchenko1-0/+9
AMP status codes copied from Bluez patch sent by Peter Krystad <pkrystad@codeaurora.org>. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-19Bluetooth: Use AUTO_OFF constant in jiffiesAndrei Emeltchenko1-1/+2
Move AUTO_OFF_TIMEOUT to other constants changing name to HCI_AUTO_OFF_TIMEOUT and convert to jiffies. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12Bluetooth: Update HCI timeouts constants to use msecs_to_jiffiesAndrei Emeltchenko1-5/+5
The HCI constants are always used in form of jiffies. So just include the conversion from msecs in the define itself. This has the advantage of making the code where the timeout is used more readable and avoiding unnecessary conversions. The patch is similar to commit ba13ccd9 doing the same job for L2CAP Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-11Merge branch 'for-upstream' of ↵Gustavo Padovan1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_event.c
2012-06-08Bluetooth: Add support for encryption key refreshJohan Hedberg1-0/+6
With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove unused HCI timeouts definitionsSzymon Janc1-2/+0
Those are not used anywhere in code (and never were since introduction in 2006) so just remove them. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Process A2MP Discover RequestAndrei Emeltchenko1-0/+3
Adds helper functions to count HCI devs and process A2MP Discover Request, code makes sure that first controller in the list is BREDR one. Trace is shown below: ... > ACL data: handle 11 flags 0x02 dlen 16 A2MP: Discover req: mtu/mps 670 mask: 0x0000 < ACL data: handle 11 flags 0x00 dlen 22 A2MP: Discover rsp: mtu/mps 670 mask: 0x0000 Controller list: id 0 type 0 (BR-EDR) status 0x01 (Bluetooth only) id 1 type 1 (802.11 AMP) status 0x01 (Bluetooth only) ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Define HCI AMP cmd structAndrei Emeltchenko1-0/+81
Add HCI commands to deal with Bluetooth AMP controllers. Those commands will be used by bluetooth and softamp code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan1-1/+0
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in include/net/bluetoothGustavo Padovan1-2/+2
Fix all warning and errors reported by checkpatch but license trailing whitespace and bdaddr_t definition. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use defined link key sizeAndrei Emeltchenko1-2/+4
Remove magic number with defined link key size. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSESzymon Janc1-1/+1
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to reset device on close instead of init, not to not reset at all. Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-09Bluetooth: Enable Low Energy support by defaultMarcel Holtmann1-1/+0
The Bluetooth Low Energy support so far was disabled by default via a module parameter. With this change the module parameter will be removed and Low Energy is enabled by default. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Add HCI_PERIODIC_INQ to dev_flagsAndre Guedes1-0/+1
This patch adds the HCI_PERIODIC_INQ flag to dev_flags. This flag tracks if periodic inquiry is enabled or not. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Add Periodic Inquiry command complete handlerAndre Guedes1-0/+2
This patch adds a handler function to Periodic Inquiry command complete event. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Add TX power tag to EIR dataMarcel Holtmann1-0/+4
The Inquiry Response TX power tag should be added to the Extended Inquiry Data (EIR) as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-05Bluetooth: Fix userspace compatibility issue with mgmt interfaceGustavo Padovan1-1/+1
To ensure that old user space versions do not accidentally pick up and try to use the management channel, use a different channel number. Reported-by: Keith Packard <keithp@keithp.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-03-28Bluetooth: hci_core: fix NULL-pointer dereference at unregisterJohan Hovold1-0/+1
Make sure hci_dev_open returns immediately if hci_dev_unregister has been called. This fixes a race between hci_dev_open and hci_dev_unregister which can lead to a NULL-pointer dereference. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n /dev/ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close calls hci_dev_unregister and sleeps on req lock in hci_dev_do_close 5. hci_dev_open (1) releases req lock 6. hci_dev_do_close grabs req lock and returns as device is not up 7. hci_dev_unregister sleeps in destroy_workqueue 8. hci_dev_open (3) grabs req lock, calls hci_init_req and eventually sleeps 9. hci_dev_unregister finishes, while hci_dev_open is still running... [ 79.627136] INFO: trying to register non-static key. [ 79.632354] the code is fine but needs lockdep annotation. [ 79.638122] turning off the locking correctness validator. [ 79.643920] [<c00188bc>] (unwind_backtrace+0x0/0xf8) from [<c00729c4>] (__lock_acquire+0x1590/0x1ab0) [ 79.653594] [<c00729c4>] (__lock_acquire+0x1590/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128) [ 79.663085] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0040a88>] (run_timer_softirq+0x150/0x3ac) [ 79.672668] [<c0040a88>] (run_timer_softirq+0x150/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c) [ 79.682281] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94) [ 79.690856] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84) [ 79.699157] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) [ 79.708648] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60) [ 79.718048] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.723358] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.731933] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.740509] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.747497] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 79.756011] pgd = cf3b4000 [ 79.758850] [00000000] *pgd=8f0c7831, *pte=00000000, *ppte=00000000 [ 79.765502] Internal error: Oops: 80000007 [#1] [ 79.770294] Modules linked in: [ 79.773529] CPU: 0 Tainted: G W (3.3.0-rc6-00002-gb5d5c87 #421) [ 79.781066] PC is at 0x0 [ 79.783721] LR is at run_timer_softirq+0x16c/0x3ac [ 79.788787] pc : [<00000000>] lr : [<c0040aa4>] psr: 60000113 [ 79.788787] sp : cf281ee0 ip : 00000000 fp : cf280000 [ 79.800903] r10: 00000004 r9 : 00000100 r8 : b6f234d0 [ 79.806427] r7 : c0519c28 r6 : cf093488 r5 : c0561a00 r4 : 00000000 [ 79.813323] r3 : 00000000 r2 : c054eee0 r1 : 00000001 r0 : 00000000 [ 79.820190] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 79.827728] Control: 10c5387d Table: 8f3b4019 DAC: 00000015 [ 79.833801] Process gpsd (pid: 1265, stack limit = 0xcf2802e8) [ 79.839965] Stack: (0xcf281ee0 to 0xcf282000) [ 79.844573] 1ee0: 00000002 00000000 c0040a24 00000000 00000002 cf281f08 00200200 00000000 [ 79.853210] 1f00: 00000000 cf281f18 cf281f08 00000000 00000000 00000000 cf281f18 cf281f18 [ 79.861816] 1f20: 00000000 00000001 c056184c 00000000 00000001 b6f234d0 c0561848 00000004 [ 79.870452] 1f40: cf280000 c003a3b8 c051e79c 00000001 00000000 00000100 3fa9e7b8 0000000a [ 79.879089] 1f60: 00000025 cf280000 00000025 00000000 00000000 b6f234d0 00000000 00000004 [ 79.887756] 1f80: 00000000 c003a924 c053ad38 c0013a50 fa200000 cf281fb0 ffffffff c0008530 [ 79.896362] 1fa0: 0001e6a0 0000aab8 80000010 c037499c 0001e6a0 be8dab00 0001e698 00036698 [ 79.904998] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.913665] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff 00fbf700 04ffff00 [ 79.922302] [<c0040aa4>] (run_timer_softirq+0x16c/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c) [ 79.931945] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94) [ 79.940582] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84) [ 79.948913] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) [ 79.958404] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60) [ 79.967773] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.973083] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.981658] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.990234] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.997161] Code: bad PC value [ 80.000396] ---[ end trace 6f6739840475f9ee ]--- [ 80.005279] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-07Bluetooth: Fix coding style in all .h filesGustavo F. Padovan1-4/+4
Proper align the struct definitions. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-02-28Bluetooth: Add missing host features definitionsJohan Hedberg1-1/+3
This patch adds missing SSP and "Simultaneous LE & BR/EDR" feature bit definitions to hci.h. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-27Bluetooth: Use kernel int types instead of ones from stdint.hJohan Hedberg1-2/+2
u8/__u8/u32/etc should be used in the kernel instead of stdint.h types. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: mgmt: Track pending class changesJohan Hedberg1-0/+1
This patch adds a flag to track pending changes to the class of device. This is needed since we cannot cleanly handle multiple simultaneous commands and need to return a "busy" error status in the mgmt commands that might trigger a class change. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Implement Set LE commandJohan Hedberg1-0/+1
This patch implements support for the Set LE mgmt command. Now, in addition to the enable_le module parameter user space needs to send an explicit Enable LE command to enable LE support. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Make Set Link Security callable while powered offJohan Hedberg1-0/+1
This patch makes it possible to change the Link Security setting while powered off and have it automatically enabled when powering on a device. To track the desired state once powered on a new HCI_LINK_SECURITY flag is added. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Allow connectable/discoverable changes in off stateJohan Hedberg1-0/+2
This patch makes it possible to toggle the connectable & discoverable settings when powered off. Two new hdev->dev_flags flags are added to track what the scan mode should be when the device is finally powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Add basic support for Set High Speed commandJohan Hedberg1-0/+1
This patch adds rudimentary support for the Set High Speed command in the form of a new HCI dev flag (HCI_HS_ENABLED). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-14 09:28:03 +0000