summaryrefslogtreecommitdiffstats
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2019-03-01media: include: fix several typosMauro Carvalho Chehab12-19/+19
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: rc: rcmm decoder and encoderPatrick Lerda1-3/+11
media: add support for RCMM infrared remote controls. Signed-off-by: Patrick Lerda <patrick9876@free.fr> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: v4l2-mem2mem: Correct return type for mem2mem buffer helpersEzequiel Garcia1-9/+15
This commit changes the return type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove which currently return void pointer. In every case, the actual return type is a struct vb2_v4l2_buffer pointer. Change the return type of the listed functions, so type checking can be properly used. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: clean up line-too-long checkpatch warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: vb2: keep track of timestamp statusHans Verkuil1-0/+3
If a stream is stopped, or if a USERPTR/DMABUF buffer is queued backed by a different user address or dmabuf fd, then the timestamp should be skipped by vb2_find_timestamp since the memory it refers to is no longer valid. So keep track of a 'copied_timestamp' state: it is set when the timestamp is copied from an output to a capture buffer, and is cleared when it is no longer valid. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: vb2: replace bool by bitfield in vb2_bufferHans Verkuil1-2/+2
The bool type is not recommended for use in structs, so replace these by bitfields. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: v4l2-subdev.h: v4l2_subdev_call: use temp __sd variableHans Verkuil1-3/+4
The sd argument of this macro can be a more complex expression. Since it is used 5 times in the macro it can be evaluated that many times as well. So assign it to a temp variable in the beginning and use that instead. This also avoids any potential side-effects of evaluating sd. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07media: v4l2-mem2mem: Rename v4l2_m2m_buf_copy_data to v4l2_m2m_buf_copy_metadataEzequiel Garcia1-7/+7
The v4l2_m2m_buf_copy_data helper is used to copy the buffer metadata, such as its timestamp and its flags. Therefore, the v4l2_m2m_buf_copy_metadata name is more clear and avoids confusion with a payload data copy. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: also fix cedrus_dec.c] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07media: vb2: Fix buf_out_validate documentationEzequiel Garcia1-1/+2
The .buf_out_validate callback is mandatory for OUTPUT queues. Mark it as such in the callback's doc. Fixes: 28d77c21cb ("media: vb2: add buf_out_validate callback") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07media: v4l2-common: drop v4l2_get_timestampHans Verkuil1-9/+0
This function is no longer used, so drop it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07media: videobuf: use u64 for the timestamp internallyHans Verkuil1-1/+1
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07media: v4l2-event: keep track of the timestamp in nsHans Verkuil1-0/+2
Internally use ktime_get_ns() to get the timestamp of the event. Only convert to timespec when interfacing with userspace. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31media: vb2: add buf_out_validate callbackHans Verkuil1-0/+5
When queueing a buffer to a request the 'field' value is not validated. That field is only validated when the _buf_prepare() is called, which happens when the request is queued. However, this validation should happen at QBUF time, since you want to know about this as soon as possible. Also, the spec requires that the 'field' value is validated at QBUF time. This patch adds a new buf_out_validate callback to validate the output buffer at buf_prepare time or when QBUF queues an unprepared buffer to a request. This callback is mandatory for output queues that support requests. This issue was found by v4l2-compliance since it failed to replace V4L2_FIELD_ANY by a proper field value when testing the vivid video output in combination with requests. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31media: vb2: vb2_find_timestamp: drop restriction on buffer stateHans Verkuil1-2/+1
There really is no reason why vb2_find_timestamp can't just find buffers in any state. Drop that part of the test. This also means that vb->timestamp should only be set to 0 when the driver doesn't copy timestamps. This change allows for more efficient pipelining (i.e. you can use a buffer for a reference frame even when it is queued). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-21media: sh_mobile_ceu_camera: remove obsolete soc_camera driverHans Verkuil1-29/+0
This driver got converted to not depend on soc_camera in commit 32e5a70dc8f4 ("media: platform: Add Renesas CEU driver"). There's no sense in keeping the old version there. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-21media: tw9910.h: remove obsolete soc_camera.h include.Hans Verkuil1-2/+0
This include isn't use anymore, so drop it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: Change Andrzej Pietrasiewicz's e-mail addressAndrzej Pietrasiewicz1-1/+1
My @samsung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-07media: cedrus: identify buffers by timestampHans Verkuil1-9/+5
Use the new v4l2_m2m_buf_copy_data helper function and use timestamps to refer to reference frames instead of using buffer indices. Also remove the padding fields in the structs, that's a bad idea. Just use the right types to keep everything aligned. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-07media: vb2: add vb2_find_timestamp()Hans Verkuil1-0/+17
Use v4l2_timeval_to_ns instead of timeval_to_ns to ensure that both kernelspace and userspace will use the same conversion function. Next add a new vb2_find_timestamp() function to find buffers with a specific timestamp. This function will only look at DEQUEUED and DONE buffers, i.e. buffers that are already processed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-07media: v4l2-mem2mem: add v4l2_m2m_buf_copy_data helper functionHans Verkuil1-0/+20
Memory-to-memory devices should copy various parts of struct v4l2_buffer from the output buffer to the capture buffer. Add a helper function that does that to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-25Merge tag 'media/v4.20-7' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: "The Intel IPU3 camera driver" * tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits) media: staging/ipu3-imgu: Add MAINTAINERS entry media: staging/ipu3-imgu: Address documentation comments media: v4l: Add Intel IPU3 meta buffer formats media: doc-rst: Add Intel IPU3 documentation media: ipu3-imgu: Fix firmware binary location media: ipu3-imgu: Fix compiler warnings media: staging/intel-ipu3: Add dual pipe support media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI media: staging/intel-ipu3: Add imgu top level pci device driver media: staging/intel-ipu3: Add v4l2 driver based on media framework media: staging/intel-ipu3: Add css pipeline programming media: staging/intel-ipu3: css: Initialize css hardware media: staging/intel-ipu3: css: Compute and program ccs media: staging/intel-ipu3: css: Add static settings for image pipeline media: staging/intel-ipu3: css: Add support for firmware management media: staging/intel-ipu3: css: Add dma buff pool utility functions media: staging/intel-ipu3: Implement DMA mapping functions media: staging/intel-ipu3: mmu: Implement driver media: staging/intel-ipu3: abi: Add structs media: staging/intel-ipu3: abi: Add register definitions and enum ...
2018-12-17Merge tag 'v4.20-rc7' into patchworkMauro Carvalho Chehab3-0/+94
Linux 4.20-rc7 * tag 'v4.20-rc7': (403 commits) Linux 4.20-rc7 scripts/spdxcheck.py: always open files in binary mode checkstack.pl: fix for aarch64 userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered fs/iomap.c: get/put the page in iomap_page_create/release() hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() memblock: annotate memblock_is_reserved() with __init_memblock psi: fix reference to kernel commandline enable arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h mm/sparse: add common helper to mark all memblocks present mm: introduce common STRUCT_PAGE_MAX_SHIFT define alpha: fix hang caused by the bootmem removal XArray: Fix xa_alloc when id exceeds max drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 MAINTAINERS: Daniel for drm co-maintainer drm/amdgpu: drop fclk/gfxclk ratio setting IB/core: Fix oops in netdev_next_upper_dev_rcu() dm thin: bump target version drm/vmwgfx: remove redundant return ret statement drm/i915: Flush GPU relocs harder for gen3 ...
2018-12-14media: v4l: Add support for V4L2_BUF_TYPE_META_OUTPUTSakari Ailus1-0/+17
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with the exception that it is an OUTPUT type. The use case for this is to pass buffers to the device that are not image data but metadata. The formats, just as the metadata capture formats, are typically device specific and highly structured. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Tian Shu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-07media: v4l2-subdev: document controls need _FL_HAS_DEVNODELuca Ceresoli1-1/+5
Control events can be subscribed and received by the user. Therefore drivers that support controls must expose the V4L2_SUBDEV_FL_HAS_EVENTS flag. [As discussed in https://lkml.org/lkml/2018/11/27/637] Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05Merge commit '0072a0c14d5b7cb72c611d396f143f5dcd73ebe2' into patchworkMauro Carvalho Chehab1-1/+1
Merge from Upstream after the latest media fixes branch, because we need one patch that it is there. * commit '0072a0c14d5b7cb72c611d396f143f5dcd73ebe2': (1108 commits) ide: Change to use DEFINE_SHOW_ATTRIBUTE macro ide: pmac: add of_node_put() drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink ...
2018-12-05media: mpeg2-ctrls.h: move MPEG2 state controls to non-public headerHans Verkuil2-0/+92
The MPEG2 state controls for the cedrus stateless MPEG2 driver are not yet stable. Move them out of the public headers into media/mpeg2-ctrls.h. Eventually, once this has stabilized, they will be moved back to the public headers. Unfortunately I had to cast the control type to a u32 in two switch statements to prevent a compiler warning about a control type define not being part of the enum. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: keep a reference to the request until dqbufHans Verkuil1-0/+2
When vb2_buffer_done is called the buffer is unbound from the request and put. The media_request_object_put also 'put's the request reference. If the application has already closed the request fd, then that means that the request reference at that point goes to 0 and the whole request is released. This means that the control handler associated with the request is also freed and that causes this kernel oops: [174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o [174705.995416] 2 locks held by vivid-000-vid-o/28071: [174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid] [174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common] [174705.995460] Preemption disabled at: [174705.995461] [<0000000000000000>] (null) [174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no #88 [174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [174705.995481] Call Trace: [174705.995500] dump_stack+0x46/0x60 [174705.995512] ___might_sleep.cold.79+0xe1/0xf1 [174705.995523] __mutex_lock+0x50/0x8f0 [174705.995531] ? find_held_lock+0x2d/0x90 [174705.995536] ? find_held_lock+0x2d/0x90 [174705.995542] ? find_held_lock+0x2d/0x90 [174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev] [174705.995600] media_request_clean+0x64/0xe0 [media] [174705.995609] media_request_release+0x19/0x40 [media] [174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common] [174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid] [174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid] [174705.995653] kthread+0x113/0x130 [174705.995659] ? kthread_park+0x80/0x80 [174705.995667] ret_from_fork+0x35/0x40 The vb2_buffer_done function can be called from interrupt context, so anything that sleeps is not allowed. The solution is to increment the request refcount when the buffer is queued and decrement it when the buffer is dequeued. Releasing the request is fine if that happens from VIDIOC_DQBUF. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: cec: keep track of outstanding transmitsHans Verkuil1-0/+1
I noticed that repeatedly running 'cec-ctl --playback' would occasionally select 'Playback Device 2' instead of 'Playback Device 1', even though there were no other Playback devices in the HDMI topology. This happened both with 'real' hardware and with the vivid CEC emulation, suggesting that this was an issue in the core code that claims a logical address. What 'cec-ctl --playback' does is to first clear all existing logical addresses, and immediately after that configure the new desired device type. The core code will poll the logical addresses trying to find a free address. When found it will issue a few standard messages as per the CEC spec and return. Those messages are queued up and will be transmitted asynchronously. What happens is that if you run two 'cec-ctl --playback' commands in quick succession, there is still a message of the first cec-ctl command being transmitted when you reconfigure the adapter again in the second cec-ctl command. When the logical addresses are cleared, then all information about outstanding transmits inside the CEC core is also cleared, and the core is no longer aware that there is still a transmit in flight. When the hardware finishes the transmit it calls transmit_done and the CEC core thinks it is actually in response of a POLL messages that is trying to find a free logical address. The result of all this is that the core thinks that the logical address for Playback Device 1 is in use, when it is really an earlier transmit that ended. The main transmit thread looks at adap->transmitting to check if a transmit is in progress, but that is set to NULL when the adapter is unconfigured. adap->transmitting represents the view of userspace, not that of the hardware. So when unconfiguring the adapter the message is marked aborted from the point of view of userspace, but seen from the PoV of the hardware it is still ongoing. So introduce a new bool transmit_in_progress that represents the hardware state and use that instead of adap->transmitting. Now the CEC core waits until the hardware finishes the transmit before starting a new transmit. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: v4l2-common: add V4L2_FRACT_COMPAREAkinobu Mita1-0/+5
Add macro to compare two v4l2_fract values in v4l2 common internal API. The same macro FRACT_CMP() is used by vivid and bcm2835-camera. This just renames it to V4L2_FRACT_COMPARE in order to avoid namespace collision. Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-22media: rc: add driver for Xbox DVD Movie Playback KitBenjamin Valentin1-0/+1
The Xbox DVD Movie Playback Kit is a USB dongle with an IR remote for the Original Xbox. Historically it has been supported by the out-of-tree lirc_xbox driver, but this one has fallen out of favour and was just dropped from popular Kodi (formerly XBMC) distributions. This driver is heavily based on the ati_remote driver where all the boilerplate was taken from - I was mostly just removing code. Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: vidioc_cropcap -> vidioc_g_pixelaspectHans Verkuil1-4/+4
Now vidioc_cropcap is only used to return the pixelaspect, so rename it accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: v4l2-ioctl: remove unused vidioc_g/s_cropHans Verkuil1-8/+0
Now that all drivers have dropped vidioc_g/s_crop we can remove support for them in the V4L2 core. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: davinci/vpbe: drop unused g_cropcapHans Verkuil1-4/+0
This function/callback is never used. Drop it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: v4l2-ioctl: add QUIRK_INVERTED_CROPHans Verkuil1-2/+11
Some old Samsung drivers use the legacy crop API incorrectly: the crop and compose targets are swapped. Normally VIDIOC_G_CROP will return the CROP rectangle of a CAPTURE stream and the COMPOSE rectangle of an OUTPUT stream. The Samsung drivers do the opposite. Note that these drivers predate the selection API. If this 'QUIRK' flag is set, then the v4l2-ioctl core will swap the CROP and COMPOSE targets as well. That way backwards compatibility is ensured and we can convert the Samsung drivers to the selection API. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: Use wait_queue_head_t for media_requestJasmin Jessich1-1/+1
The portable type for a wait queue is wait_queue_head_t. Signed-off-by: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-06media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queueEzequiel Garcia1-1/+1
To be consistent with the rest of the mem2mem helpers, rename vb2_m2m_request_queue to v4l2_m2m_request_queue. This is just a cosmetic change. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-31Merge tag 'media/v4.20-2' of ↵Linus Torvalds7-16/+695
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...
2018-10-29Merge tag 'media/v4.20-1' of ↵Linus Torvalds13-260/+420
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new dvb frontend driver: lnbh29 - new sensor drivers: imx319 and imx 355 - some old soc_camera driver renames to avoid conflict with new drivers - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver - a new V4L2 frontend for the FWHT codec - several other improvements, bug fixes, code cleanups, etc * tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits) media: rename soc_camera I2C drivers media: cec: forgot to cancel delayed work media: vivid: Support 480p for webcam capture media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD media: vivid: Add 16-bit bayer to format list media: v4l2-tpg-core: Add 16-bit bayer media: pvrusb2: replace `printk` with `pr_*` media: venus: vdec: fix decoded data size media: cx231xx: fix potential sign-extension overflow on large shift media: dt-bindings: media: rcar_vin: add device tree support for r8a7744 media: isif: fix a NULL pointer dereference bug media: exynos4-is: make const array config_ids static media: cx23885: make const array addr_list static media: ivtv: make const array addr_list static media: bttv-input: make const array addr_list static media: cx18: Don't check for address of video_dev media: dw9807-vcm: Fix probe error handling media: dw9714: Remove useless error message media: dw9714: Fix error handling in probe function media: cec: name for RC passthrough device does not need 'RC for' ...
2018-10-05media: cec: name for RC passthrough device does not need 'RC for'Sean Young1-2/+0
An RC device is does not need to be called 'RC for'. Simply the name will suffice. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05media: cec: fix the Signal Free Time calculationHans Verkuil1-1/+1
The calculation of the Signal Free Time in the framework was not correct. If a message was received, then the next transmit should be considered a New Initiator and use a shorter SFT value. This was not done with the result that if both sides where continually sending messages, they both could use the same SFT value and one side could deny the other side access to the bus. Note that this fix does not take the corner case into account where a receive is in progress when you call adap_transmit. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grabSakari Ailus1-1/+25
Sometimes it may be necessary to grab a control while holding the control handler's lock. Provide an unlocked variant of v4l2_ctrl_grab for the purpose --- it's called __v4l2_ctrl_grab. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05media: v4l2-fwnode: cleanup functions that parse endpointsMauro Carvalho Chehab1-10/+9
There is already a typedef for the parse endpoint function. However, instead of using it, it is redefined at the C file (and on one of the function headers). Replace them by the function typedef, in order to cleanup several related coding style warnings. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05media: v4l2-core: cleanup coding style at V4L2 async/fwnodeMauro Carvalho Chehab3-42/+48
There are several coding style issues at those definitions, and the previous patchset added even more. Address the trivial ones by first calling: ./scripts/checkpatch.pl --strict --fix-inline include/media/v4l2-async.h include/media/v4l2-fwnode.h include/media/v4l2-mediabus.h drivers/media/v4l2-core/v4l2-async.c drivers/media/v4l2-core/v4l2-fwnode.c and then manually adjusting the style where needed. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Update V4L2 fwnode endpoint parsing documentationSakari Ailus1-19/+37
The semantics of v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() have changed slightly: they now take the bus type from the user as well as a default configuration for the bus that shall reflect the DT binding defaults. Document this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zeroSakari Ailus1-0/+2
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Detect bus type correctlySakari Ailus1-0/+2
In case the device supports multiple video bus types on an endpoint, the V4L2 fwnode framework attempts to detect the type based on the available information. This wasn't working really well, and sometimes could lead to the V4L2 fwnode endpoint struct as being mishandled between the bus types. Default to Bt.656 if no properties suggesting a bus type are found. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Let the caller provide V4L2 fwnode endpointSakari Ailus1-4/+6
Instead of allocating the V4L2 fwnode endpoint in v4l2_fwnode_endpoint_alloc_parse, let the caller to do this. This allows setting default parameters for the endpoint which is a very common need for drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus1-2/+4
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l2: async: Remove notifier subdevs arraySteve Longerbeam2-28/+5
All platform drivers have been converted to use v4l2_async_notifier_add_subdev(), in place of adding asd's to the notifier subdevs array. So the subdevs array can now be removed from struct v4l2_async_notifier, and remove the backward compatibility support for that array in v4l2-async.c. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l2-fwnode: Add a convenience function for registering subdevs with ↵Steve Longerbeam1-0/+38
notifiers Adds v4l2_async_register_fwnode_subdev(), which is a convenience function for parsing a sub-device's fwnode port endpoints for connected remote sub-devices, registering a sub-device notifier, and then registering the sub-device itself. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdevSteve Longerbeam2-12/+12
The fwnode endpoint and reference parsing functions in v4l2-fwnode.c are modified to make use of v4l2_async_notifier_add_subdev(). As a result the notifier->subdevs array is no longer allocated or re-allocated, and by extension the max_subdevs value is also no longer needed. Callers of the fwnode endpoint and reference parsing functions must now first initialize the notifier with a call to v4l2_async_notifier_init(). This includes the function v4l2_async_register_subdev_sensor_common(), and the intel-ipu3, omap3isp, and rcar-vin drivers. Since the notifier->subdevs array is no longer allocated in the fwnode endpoint and reference parsing functions, the callers of those functions must never reference that array, since it is now NULL. Of the drivers that make use of the fwnode/ref parsing, only the intel-ipu3 driver references the ->subdevs[] array, (in the notifier completion callback), so that driver has been modified to iterate through the notifier->asd_list instead. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>