summaryrefslogtreecommitdiffstats
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2016-04-20[media] v4l2-rect.h: new header with struct v4l2_rect helper functionsHans Verkuil1-0/+173
This makes it easier to share this code with any driver that needs to manipulate the v4l2_rect datastructure. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] v4l2-device.h: add v4l2_device_mask_ variantsHans Verkuil1-1/+54
The v4l2_device_call_* defines filter subdevs based on the grp_id value. But some drivers use a bitmask, so instead of filtering by grp_id == value, you want to filter by grp_id & value. Make variants of these defines to do this. The 'has_op' define has been extended to have a grp_id argument as well, and a mask variant has been added. This extra argument required a change to go7007. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] media: Improve documentation for link_setup/link_modifyMauro Carvalho Chehab2-1/+5
Those callbacks are called with the media_device.graph_mutex held. Add a note about that, as the code called by those notifiers should not be touching in the mutex. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] media-device: get rid of the spinlockMauro Carvalho Chehab1-5/+1
Right now, the lock schema for media_device struct is messy, since sometimes, it is protected via a spin lock, while, for media graph traversal, it is protected by a mutex. Solve this conflict by always using a mutex. As a side effect, this prevents a bug when the media notifiers is called at atomic context, while running the notifier callback: BUG: sleeping function called from invalid context at mm/slub.c:1289 in_atomic(): 1, irqs_disabled(): 0, pid: 3479, name: modprobe 4 locks held by modprobe/3479: #0: (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160 #1: (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160 #2: (register_mutex#5){+.+.+.}, at: [<ffffffffa10596c7>] usb_audio_probe+0x257/0x1c90 [snd_usb_audio] #3: (&(&mdev->lock)->rlock){+.+.+.}, at: [<ffffffffa0e6051b>] media_device_register_entity+0x1cb/0x700 [media] CPU: 2 PID: 3479 Comm: modprobe Not tainted 4.5.0-rc3+ #49 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803b3f6f288 ffffffff81933901 ffff8803c4bae000 ffff8803c4bae5c8 ffff8803b3f6f2b0 ffffffff811c6af5 ffff8803c4bae000 ffffffff8285d7f6 0000000000000509 ffff8803b3f6f2f0 ffffffff811c6ce5 Call Trace: [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffff8155aade>] kmem_cache_alloc_trace+0x20e/0x300 [<ffffffffa0e66e3d>] ? media_add_link+0x4d/0x140 [media] [<ffffffffa0e66e3d>] media_add_link+0x4d/0x140 [media] [<ffffffffa0e69931>] media_create_pad_link+0xa1/0x600 [media] [<ffffffffa0fe11b3>] au0828_media_graph_notify+0x173/0x360 [au0828] [<ffffffffa0e68a6a>] ? media_gobj_create+0x1ba/0x480 [media] [<ffffffffa0e606fb>] media_device_register_entity+0x3ab/0x700 [media] Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Add global alpha support for DRM pipelineLaurent Pinchart1-2/+3
Make the global alpha multiplier of DRM planes configurable. All the necessary infrastructure is there, we just need to store the alpha value passed through the DRM API. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Add Z-order support for DRM pipelineLaurent Pinchart1-4/+14
Make the Z-order of planes configurable by assigning RPFs to BRU inputs dynamically based on the Z-order position. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Fix vsp1_du_atomic_(begin|flush) declarationsLaurent Pinchart1-2/+2
The functions are void, make the declaration match the definition. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: subdev: Add pad config allocator and initLaurent Pinchart1-0/+8
Add a new subdev operation to initialize a subdev pad config array, and a helper function to allocate and initialize the array. This can be used by bridge drivers to implement try format based on subdev pad operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@linaro.org> Acked-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] media: Rename is_media_entity_v4l2_io to ↵Laurent Pinchart1-2/+2
is_media_entity_v4l2_video_device All users of is_media_entity_v4l2_io() (the exynos4-is, omap3isp, davince_vpfe and omap4iss drivers and the v4l2-mc power management code) use the function to check whether entities are video_device instances, either to ensure they can cast the entity to a struct video_device, or to count the number of video nodes users. The purpose of the function is thus to identify whether the media entity instance is an instance of the video_device object, not to check whether it can perform I/O. Rename it accordingly, we will introduce a more specific is_media_entity_v4l2_io() check when needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] media: Add obj_type field to struct media_entityLaurent Pinchart1-37/+39
Code that processes media entities can require knowledge of the structure type that embeds a particular media entity instance in order to cast the entity to the proper object type. This needs is shown by the presence of the is_media_entity_v4l2_io and is_media_entity_v4l2_subdev functions. The implementation of those two functions relies on the entity function field, which is both a wrong and an inefficient design, without even mentioning the maintenance issue involved in updating the functions every time a new entity function is added. Fix this by adding add an obj_type field to the media entity structure to carry the information. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l2: add device_caps to struct video_deviceHans Verkuil1-0/+3
Instead of letting drivers fill in device_caps at querycap time, let them fill it in when the video device is registered. This has the advantage that in the future the v4l2 core can access the video device's capabilities and take decisions based on that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] videobuf2-core: Check user space planes array in dqbufSakari Ailus1-0/+4
The number of planes in videobuf2 is specific to a buffer. In order to verify that the planes array provided by the user is long enough, a new vb2_buf_op is required. Call __verify_planes_array() when the dequeued buffer is known. Return an error to the caller if there was one, otherwise remove the buffer from the done list. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v4.4 and later Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-06[media] media-device: make topology_version u64Mauro Carvalho Chehab1-1/+1
The uAPI defines it with 64 bits. Let's change the Kernel implementation too. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-06[media] media-device: Fix a commentMauro Carvalho Chehab1-1/+1
The comment is for the wrong function. Fix it. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-19Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-1/+10
Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ...
2016-03-04Merge branches 'amba', 'fixes', 'misc' and 'tauros2' into for-nextRussell King1-1/+10
2016-03-04[media] v4l2-mc.h: fix yet more compiler errorsHans Verkuil1-4/+3
The newly added functions have an extra semicolon, which prevents compilation, and they need to be marked inline: In file included from ../include/media/tuner.h:23:0, from ../drivers/media/tuners/tuner-simple.c:10: ../include/media/v4l2-mc.h:233:1: error: expected identifier or '(' before '{' token Remove spurious return, remove copy-and-pasted semi-colons, add static inline. Fixes: a77bf7048add ("v4l2-mc.h: Add stubs for the V4L2 PM/pipeline routines") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] v4l2-mc.h: fix compiler warningsHans Verkuil1-3/+3
Fix these warnings when CONFIG_MEDIA_CONTROLLER is not defined: In file included from drivers/media/v4l2-core/v4l2-fh.c:32:0: include/media/v4l2-mc.h:173:12: warning: 'v4l_enable_media_source' defined but not used [-Wunused-function] static int v4l_enable_media_source(struct video_device *vdev) ^ include/media/v4l2-mc.h:183:12: warning: 'v4l_vb2q_enable_media_source' defined but not used [-Wunused-function] static int v4l_vb2q_enable_media_source(struct vb2_queue *q) ^ In file included from include/media/tuner.h:23:0, from drivers/media/tuners/tuner-types.c:9: include/media/v4l2-mc.h:173:12: warning: 'v4l_enable_media_source' defined but not used [-Wunused-function] static int v4l_enable_media_source(struct video_device *vdev) ^ include/media/v4l2-mc.h:178:13: warning: 'v4l_disable_media_source' defined but not used [-Wunused-function] static void v4l_disable_media_source(struct video_device *vdev) ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03v4l2-mc.h: Add stubs for the V4L2 PM/pipeline routinesMauro Carvalho Chehab1-2/+14
Let's add stubs for the case where the Kernel gets compiled without MEDIA_CONTROLLER. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] v4l: Add generic pipeline power management codeSakari Ailus1-1/+42
When the Media controller framework was merged, it was decided not to add pipeline power management code for it was not seen generic. As a result, a number of drivers have copied the same piece of code, with same bugfixes done to them at different points of time (or not at all). Add these functions to V4L2. Their use is optional for drivers. [mchehab@osg.samsung.com: Fix merge conflicts] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] media: Always keep a graph walk large enough aroundSakari Ailus1-0/+3
Re-create the graph walk object as needed in order to have one large enough available for all entities in the graph. This enumeration is used for pipeline power management in the future. [mchehab@osg.samsung.com: fix documentation bug: " warning: bad line: graph_mutex"] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] v4l2-mc: Fix parameter descriptionMauro Carvalho Chehab1-2/+2
.//include/media/v4l2-mc.h:138: warning: No description found for parameter 'vdev' .//include/media/v4l2-mc.h:152: warning: No description found for parameter 'vdev' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] media-entity: include linux/bug.h for WARN_ONPhilipp Zabel1-0/+1
WARN_ON is used by this header file, but none of its direct includes include asm/bug.h by way of linux/bug.h yet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] au0828: use standard demod pads structMauro Carvalho Chehab1-0/+2
As we want au0828 to use the core function to create the MC graphs, use enum demod_pad_index instead of enum au8522_media_pads. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] rc-core: allow calling rc_open with device not initializedMauro Carvalho Chehab1-2/+2
The device initialization completes only after calling input_register_device(). However, rc_open() can be called while the device is being registered by the input/evdev core. So, we can't expect that rc_dev->initialized to be true. Change the logic to don't require initialized == true at rc_open and change the type of initialized to be atomic. this way, we can check for it earlier where it is really needed, without needing to lock the mutex just for testing it. Tested with nuvoton_cir driver on a NUC5i7RYB with CIR integrated on it. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-02[media] media-device.h: fix compiler warningHans Verkuil1-2/+0
Fix these compiler warnings: media-git/include/media/media-device.h: In function 'media_device_pci_init': media-git/include/media/media-device.h:610:9: warning: 'return' with a value, in function returning void return NULL; ^ media-git/include/media/media-device.h: In function '__media_device_usb_init': media-git/include/media/media-device.h:618:9: warning: 'return' with a value, in function returning void return NULL; ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-27[media] media: v4l-core add enable/disable source common interfacesShuah Khan2-1/+65
Add a new interfaces to be used by v4l-core to invoke enable source and disable_source handlers in the media_device. The enable_source helper function invokes the enable_source handler to find media source entity connected to the entity and check is it is available or busy. If source is available, link is activated and pipeline is started. The disable_source helper function invokes the disable_source handler to deactivate and stop the pipeline. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-27[media] media: Media Controller non-locking __media_entity_pipeline_start/stop()Shuah Khan1-0/+19
Add non-locking __media_entity_pipeline_start/stop() interfaces to be called from code paths that hold the graph_mutex. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-27[media] media: Media Controller enable/disable source handler APIShuah Khan1-0/+30
Add new fields to struct media_device to add enable_source, and disable_source handlers, and source_priv to stash driver private data that is used to run these handlers. The enable_source handler finds source entity for the passed in entity and checks if it is available. When link is found, it activates it. Disable source handler deactivates the link. Bridge driver is expected to implement and set these handlers. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-27[media] media: Media Controller register/unregister entity_notify APIShuah Khan1-0/+56
Add new interfaces to register and unregister entity_notify hook to media device. These interfaces allow drivers to add hooks to take appropriate actions when new entities get added to a shared media device. For example, au0828 bridge driver registers an entity_notify hook to create links as needed between media graph nodes. [mchehab@osg.samsung.com: simple comments should be /* and not /**] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-23[media] media_device: move allocation out of media_device_*_initMauro Carvalho Chehab1-14/+18
Right now, media_device_pci_init and media_device_usb_init does media_device allocation internaly. That preents its usage when the media_device struct is embedded on some other structure. Move memory allocation outside it, to make it more generic. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-23[media] media-device: move PCI/USB helper functions from v4l2-mcMauro Carvalho Chehab2-46/+53
Those ancillary functions could be called even when compiled without V4L2 support, as warned by ktest build robot: All errors (new ones prefixed by >>): >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb/dvb-usb.ko] undefined! >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko] undefined! >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/au0828/au0828.ko] undefined! Also, there's nothing there that are specific to V4L2. So, move those ancillary functions to MC core. No functional changes. Just function rename. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19[media] v4l: vsp1: Implement atomic update for the DRM driverLaurent Pinchart1-3/+6
Add two API functions named vsp1_du_atomic_begin() and vsp1_du_atomic_flush() to signal the start and end of an atomic update. The vsp1_du_setup_rpf() function is renamed to vsp1_du_atomic_update() for consistency. With this new API, the driver will reprogram all modified inputs atomically before restarting the video stream. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19[media] v4l: vsp1: Add VSP+DU supportLaurent Pinchart1-0/+30
Implement internal control of the VSP pipeline to be used by the DU DRM/KMS driver when using the VSP as an internal composer handled through DRM/KMS only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] allow overriding the driver nameMauro Carvalho Chehab1-0/+5
On USB drivers, the dev struct is usually filled with the USB device. That would mean that the name of the driver specified by media_device.dev.driver.name would be "usb", instead of the name of the actual driver that created the media entity. Add an optional field at the internal struct to allow drivers to override the driver name. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] rc-core: don't lock device at rc_register_device()Mauro Carvalho Chehab1-0/+2
The mutex lock at rc_register_device() was added by commit 08aeb7c9a42a ("[media] rc: add locking to fix register/show race"). It is meant to avoid race issues when trying to open a sysfs file while the RC register didn't complete. Adding a lock there causes troubles, as detected by the Kernel lock debug instrumentation at the Kernel: ====================================================== [ INFO: possible circular locking dependency detected ] 4.5.0-rc3+ #46 Not tainted ------------------------------------------------------- systemd-udevd/2681 is trying to acquire lock: (s_active#171){++++.+}, at: [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0 but task is already holding lock: (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&dev->lock){+.+.+.}: [<ffffffff8124817d>] lock_acquire+0x13d/0x320 [<ffffffff822de966>] mutex_lock_nested+0xb6/0x860 [<ffffffffa0721f2b>] show_protocols+0x3b/0x3f0 [rc_core] [<ffffffff81cdaba5>] dev_attr_show+0x45/0xc0 [<ffffffff8171f1b3>] sysfs_kf_seq_show+0x203/0x3c0 [<ffffffff8171a6a1>] kernfs_seq_show+0x121/0x1b0 [<ffffffff81617c71>] seq_read+0x2f1/0x1160 [<ffffffff8171c911>] kernfs_fop_read+0x321/0x460 [<ffffffff815abc20>] __vfs_read+0xe0/0x3d0 [<ffffffff815ae90e>] vfs_read+0xde/0x2d0 [<ffffffff815b1d01>] SyS_read+0x111/0x230 [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76 -> #0 (s_active#171){++++.+}: [<ffffffff81244f24>] __lock_acquire+0x4304/0x5990 [<ffffffff8124817d>] lock_acquire+0x13d/0x320 [<ffffffff81717d3a>] __kernfs_remove+0x58a/0x810 [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0 [<ffffffff81721592>] remove_files.isra.0+0x72/0x190 [<ffffffff8172174b>] sysfs_remove_group+0x9b/0x150 [<ffffffff81721854>] sysfs_remove_groups+0x54/0xa0 [<ffffffff81cd97d0>] device_remove_attrs+0xb0/0x140 [<ffffffff81cdb27c>] device_del+0x38c/0x6b0 [<ffffffffa0724b8b>] rc_register_device+0x8cb/0x1450 [rc_core] [<ffffffffa1326a7b>] dvb_usb_remote_init+0x66b/0x14d0 [dvb_usb] [<ffffffffa1321c81>] dvb_usb_device_init+0xf21/0x1860 [dvb_usb] [<ffffffffa13517dc>] dib0700_probe+0x14c/0x410 [dvb_usb_dib0700] [<ffffffff81dbb1dd>] usb_probe_interface+0x45d/0x940 [<ffffffff81ce7e7a>] driver_probe_device+0x21a/0xc30 [<ffffffff81ce89b1>] __driver_attach+0x121/0x160 [<ffffffff81ce21bf>] bus_for_each_dev+0x11f/0x1a0 [<ffffffff81ce6cdd>] driver_attach+0x3d/0x50 [<ffffffff81ce5df9>] bus_add_driver+0x4c9/0x770 [<ffffffff81cea39c>] driver_register+0x18c/0x3b0 [<ffffffff81db6e98>] usb_register_driver+0x1f8/0x440 [<ffffffffa074001e>] dib0700_driver_init+0x1e/0x1000 [dvb_usb_dib0700] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [<ffffffff8144d8eb>] do_init_module+0x1d0/0x5ad [<ffffffff812f27b6>] load_module+0x6666/0x9ba0 [<ffffffff812f5fe8>] SyS_finit_module+0x108/0x130 [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->lock); lock(s_active#171); lock(&dev->lock); lock(s_active#171); *** DEADLOCK *** 3 locks held by systemd-udevd/2681: #0: (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160 #1: (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160 #2: (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core] In this specific case, some error happened during device init, causing IR to be disabled. Let's fix it by adding a var that will tell when the device is initialized. Any calls before that will return a -EINVAL. That should prevent the race issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] v4l2-mc: add a routine to create USB media_deviceMauro Carvalho Chehab1-5/+34
Instead of copying exactly the same code on all USB devices, add an ancillary routine that will create and fill the struct media_device with the values imported from the USB device. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] v4l2-mc.h: prevent it for being included twiceMauro Carvalho Chehab1-0/+5
Don't let it be included twice, to avoid compiler issues. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-11ARM: 8508/2: videobuf2-dc: Let drivers specify DMA attrsTomasz Figa1-1/+10
DMA allocations might be subject to certain requirements specific to the hardware using the buffers, such as availability of kernel mapping (for contents fix-ups in the driver). The only entity that knows them is the driver, so it must share this knowledge with vb2-dc. This patch extends the alloc_ctx initialization interface to let the driver specify DMA attrs, which are then stored inside the allocation context and will be used for all allocations with that context. As a side effect, all dma_*_coherent() calls are turned into dma_*_attrs() calls, because the attributes need to be carried over through all DMA operations. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-11[media] tvp5150: move input definition header to dt-bindingsJavier Martinez Canillas1-34/+0
Add a header file for the tvp5150 input connectors constants that can be shared between the driver and Device Tree source files. [mchehab@osg.samsung.com: rename tvp5150.h also at em28xx-cards.c] Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] tvp5150: add internal signal generator to HW input listJavier Martinez Canillas1-0/+1
Some tvp5150 variants, have an internal generator that can generate a black screen output. Since this is a HW block, it should be in the HW inputs list. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-subdev: add registered_async subdev core operationJavier Martinez Canillas1-0/+3
V4L2 sub-devices that are registered asynchronously have no way to know when they have been registration with a V4L2 device but they might need to take some action after this. So let's add a callback that can be executed by the V4L2 async core to allow sub-devices drivers to do any needed initialization that depends on the registration. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-ctrls: remove unclaimed v4l2_ctrl_add_ctrl() interfaceVladimir Zapolskiy1-12/+0
v4l2_ctrl_add_ctrl() interface has no users since its introduction in commit 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") and its functionality is covered by v4l2_ctrl_new() and derivative interfaces, so it is safe to remove the interface from the kernel. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-mc: add an ancillary routine for PCI-based MCMauro Carvalho Chehab1-1/+23
Instead of copyping the same code on all PCI devices that would have a media controller, add a core ancillary routine. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] add media controller support to videobuf2-dvbMauro Carvalho Chehab1-0/+5
Allow devices to pass an optional argument to register the DVB driver at the media controller. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-mc: add a generic function to create the media graphMauro Carvalho Chehab1-0/+25
The em28xx_v4l2_create_media_graph() is almost generic enough to be at the core, as an ancillary function. Make it even more generic, by getting rid of em28xx-specific code, relying only at the media_device, in order to discover all entities found on PC-customer's hardware and add it at the V4L2 core. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-09Merge tag 'v4.5-rc3' into patchworkMauro Carvalho Chehab1-1/+2
Linux 4.5-rc3 * tag 'v4.5-rc3': (644 commits) Linux 4.5-rc3 epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition ...
2016-02-04[media] vb2: fix nasty vb2_thread regressionHans Verkuil1-1/+2
The vb2_thread implementation was made generic and was moved from videobuf2-v4l2.c to videobuf2-core.c in commit af3bac1a. Unfortunately that clearly was never tested since it broke read() causing NULL address references. The root cause was confused handling of vb2_buffer vs v4l2_buffer (the pb pointer in various core functions). The v4l2_buffer no longer exists after moving the code into the core and it is no longer needed. However, the vb2_thread code passed a pointer to a vb2_buffer to the core functions were a v4l2_buffer pointer was expected and vb2_thread expected that the vb2_buffer fields would be filled in correctly. This is obviously wrong since v4l2_buffer != vb2_buffer. Note that the pb pointer is a void pointer, so no type-checking took place. This patch fixes this problem: 1) allow pb to be NULL for vb2_core_(d)qbuf. The vb2_thread code will use a NULL pointer here since they don't care about v4l2_buffer anyway. 2) let vb2_core_dqbuf pass back the index of the received buffer. This is all vb2_thread needs: this index is the index into the q->bufs array and vb2_thread just gets the vb2_buffer from there. 3) the fileio->b pointer (that originally contained a v4l2_buffer) is removed altogether since it is no longer needed. Tested with vivid and the cobalt driver. Cc: stable@vger.kernel.org # Kernel >= 4.3 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] v4l2-mc: add analog TV demodulator pad index macrosMauro Carvalho Chehab1-0/+15
We also need to standardize the PAD index macros for demods, as they all should look the same in a media graph. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] v4l2-mc.h Add pads for audio and video IF-PLL decodersMauro Carvalho Chehab1-0/+32
The audio and video IF-PLL decoders have one sink and one source PAD. Add macro names for those pads and describe what kind of signals are represented at such pads. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>