summaryrefslogtreecommitdiffstats
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2015-01-27[media] tea575x: split and export functionsOndrej Zary1-0/+5
Split ioctl interface from enum_freq_bands, g_tuner and s_hw_freq_seek functions and export them to be used in other drivers like bttv. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] videobuf: make unused exported functions staticHans Verkuil1-8/+0
The videobuf_dma_init* and videobuf_dma_map() functions are no longer used except in videobuf-dma-sg.c itself. Make them static. These functions were abused in various drivers. All those drivers have now been fixed, so by no longer exporting these functions future abuse is now prevented. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-23[media] smiapp: Use types better suitable for DTSakari Ailus1-5/+5
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-23[media] v4l2 core: improve debug flag handlingHans Verkuil2-4/+14
The old debug field is renamed to dev_debug to ensure that existing drivers (including out-of-tree drivers) that try to use the old name will no longer compile. A comment has also been added that makes it explicit that drivers shouldn't use this field. Additional bits have been added to the debug flag to be more fine-grained when debugging, especially when dealing with streaming ioctls and read, write and poll. You want to enable those explicitly to prevent flooding the log when streaming unless you actually want to do that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22[media] v4l2-subdev: drop unused op enum_mbus_fmtHans Verkuil1-2/+0
Weird, this op isn't used at all. Seems to be orphaned code. Remove it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22[media] v4l2-subdev: drop get/set_crop pad opsHans Verkuil1-4/+0
Drop the duplicate get/set_crop pad ops and only use get/set_selection. It makes no sense to have two duplicate ops in the internal subdev API. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22[media] media: remove emacs editor variablesHans Verkuil1-6/+0
1) This is not allowed by the kernel coding style 2) Just configure your editor correctly 3) It's really ugly Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] media: v4l2-image-sizes.h: correct the SVGA height definitionJosh Wu1-1/+1
SVGA height should be 600 not 680. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-01[media] v4l2-mediabus: improve colorspace supportHans Verkuil1-0/+4
Add and copy the new ycbcr_enc and quantization fields. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] media: v4l2-image-sizes.h: add SVGA, XGA and UXGA size definitionsJosh Wu1-0/+9
Add SVGA, UXGA and XGA size definitions to v4l2-image-sizes.h. The definitions are sorted by alphabet order. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] vb2-dma-sg: add allocation context to dma-sgHans Verkuil1-0/+3
Require that dma-sg also uses an allocation context. This is in preparation for adding prepare/finish memops to sync the memory between DMA and CPU. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] vb2: add dma_dir to the alloc memopHans Verkuil1-1/+3
This is needed for the next patch where the dma-sg alloc memop needs to know the dma_dir. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] vb2: replace 'write' by 'dma_dir'Hans Verkuil1-2/+4
The 'write' argument is very ambiguous. I first assumed that if it is 1, then we're doing video output but instead it meant the reverse. Since it is used to setup the dma_dir value anyway it is now replaced by the correct dma_dir value which is unambiguous. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] videobuf2-core.h: improve documentationHans Verkuil1-15/+17
Document that drivers can access/modify the buffer contents in buf_prepare and buf_finish. That was not clearly stated before. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] v4l2-common: move v4l2_ctrl_check to cx2341xHans Verkuil1-3/+1
The v4l2_ctrl_check() helper function is now only used in cx2341x. Move it there and make it static. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] v4l2-ctrl: move function prototypes from common.h to ctrls.hHans Verkuil2-3/+25
For some unknown reason several control prototypes where in v4l2-common.c instead of in v4l2-ctrls.h. Move them and document them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] v4l2-common: remove unused helper functionsHans Verkuil1-10/+0
Several control helper functions are no longer needed since most drivers are now converted to the control framework. So we can delete them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] si4713: cleanup platform dataSebastian Reichel1-3/+0
Remove unreferenced members from the platform data's structure. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] si4713: add device tree supportSebastian Reichel2-30/+1
Add device tree support by changing the device registration order. In the device tree the si4713 node is a normal I2C device, which will be probed as such. Thus the V4L device must be probed from the I2C device and not the other way around. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] platform: Make use of media_bus_format enumBoris BREZILLON5-9/+8
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all platform drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] Make use of the new media_bus_format definitionsBoris BREZILLON2-2/+2
Replace references to the v4l2_mbus_pixelcode enum with the new media_bus_format enum in all common headers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] media: davinci: vpbe: add support for VIDIOC_CREATE_BUFSPrabhakar Lad1-2/+0
this patch adds support for vidioc_create_bufs. Along side remove unneeded member numbuffers. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] lirc: use kfifo_initialized() on lirc_buffer's fifoMartin Kaiser1-6/+2
We can use kfifo_initialized() to check if the fifo in lirc_buffer is initialized or not. There's no need to have a dedicated fifo status variable in lirc_buffer. [m.chehab@samsung.com: add the same change to lirc_zilog, to avoid breaking compilation of staging drivers] Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] media: davinci: vpbe: drop unused member memory from vpbe_layerPrabhakar Lad1-4/+0
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] media: davinci: vpbe: use helpers provided by core if streaming is ↵Prabhakar Lad1-4/+0
started this patch uses vb2_is_busy() helper to check if streaming is actually started, instead of driver managing it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] media: davinci: vpbe: use fh handling provided by v4lPrabhakar Lad1-11/+0
this patch converts the driver to use fh handling provided by the v4l core instead of driver doing it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-09Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab4-3/+18
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-09-23[media] rc: add dvbsky rc keymap macronibble.max1-0/+1
This RC will be used by DVBSky driver, added on the next patch. Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] v4l: videobuf2: Fix typos in commentsLaurent Pinchart1-2/+2
The buffer flags are incorrectly referred to as V4L2_BUF_FLAGS_* instead of V4L2_BUF_FLAG_* in comments. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] vb2: fix VBI/poll regressionHans Verkuil1-0/+4
The recent conversion of saa7134 to vb2 unconvered a poll() bug that broke the teletext applications alevt and mtt. These applications expect that calling poll() without having called VIDIOC_STREAMON will cause poll() to return POLLERR. That did not happen in vb2. This patch fixes that behavior. It also fixes what should happen when poll() is called when STREAMON is called but no buffers have been queued. In that case poll() will also return POLLERR, but only for capture queues since output queues will always return POLLOUT anyway in that situation. This brings the vb2 behavior in line with the old videobuf behavior. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] videobuf2-core.h: fix commentHans Verkuil1-1/+1
The comment for start_streaming that tells the developer with which vb2 state buffers should be returned to vb2 gave the wrong state. Very confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] media: videobuf2-core.h: add a helper to get status of start_streaming()Prabhakar Lad1-0/+9
this patch adds a helper to get the status if start_streaming() was called successfully. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-08-26[media] dm644x_ccdc: use unsigned long for fpc_table_addrMauro Carvalho Chehab1-1/+1
The fpc_table_addr is used as an unsigned integer that stores an address. At the Kernel, the proper type for such integers is unsigned long. This generates lots of warnings when compiling on 64 bits. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] videobuf2: fix lockdep warningHans Verkuil1-0/+2
The following lockdep warning has been there ever since commit a517cca6b24fc54ac209e44118ec8962051662e3 one year ago: [ 403.117947] ====================================================== [ 403.117949] [ INFO: possible circular locking dependency detected ] [ 403.117953] 3.16.0-rc6-test-media #961 Not tainted [ 403.117954] ------------------------------------------------------- [ 403.117956] v4l2-ctl/15377 is trying to acquire lock: [ 403.117959] (&dev->mutex#3){+.+.+.}, at: [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.117974] [ 403.117974] but task is already holding lock: [ 403.117976] (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0 [ 403.117987] [ 403.117987] which lock already depends on the new lock. [ 403.117987] [ 403.117990] [ 403.117990] the existing dependency chain (in reverse order) is: [ 403.117992] [ 403.117992] -> #1 (&mm->mmap_sem){++++++}: [ 403.117997] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118006] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118010] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118014] [<ffffffff8118c9ec>] might_fault+0x7c/0xb0 [ 403.118018] [<ffffffffa0028a25>] video_usercopy+0x425/0x610 [videodev] [ 403.118028] [<ffffffffa0028c25>] video_ioctl2+0x15/0x20 [videodev] [ 403.118034] [<ffffffffa0022764>] v4l2_ioctl+0x184/0x1a0 [videodev] [ 403.118040] [<ffffffff811d77d0>] do_vfs_ioctl+0x2f0/0x4f0 [ 403.118307] [<ffffffff811d7a51>] SyS_ioctl+0x81/0xa0 [ 403.118311] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b [ 403.118319] [ 403.118319] -> #0 (&dev->mutex#3){+.+.+.}: [ 403.118324] [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0 [ 403.118329] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118333] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118336] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118340] [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640 [ 403.118344] [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118349] [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev] [ 403.118354] [<ffffffff81197270>] mmap_region+0x3d0/0x5d0 [ 403.118359] [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400 [ 403.118363] [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0 [ 403.118366] [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0 [ 403.118369] [<ffffffff810085c2>] SyS_mmap+0x22/0x30 [ 403.118376] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b [ 403.118381] [ 403.118381] other info that might help us debug this: [ 403.118381] [ 403.118383] Possible unsafe locking scenario: [ 403.118383] [ 403.118385] CPU0 CPU1 [ 403.118387] ---- ---- [ 403.118388] lock(&mm->mmap_sem); [ 403.118391] lock(&dev->mutex#3); [ 403.118394] lock(&mm->mmap_sem); [ 403.118397] lock(&dev->mutex#3); [ 403.118400] [ 403.118400] *** DEADLOCK *** [ 403.118400] [ 403.118403] 1 lock held by v4l2-ctl/15377: [ 403.118405] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0 [ 403.118411] [ 403.118411] stack backtrace: [ 403.118415] CPU: 0 PID: 15377 Comm: v4l2-ctl Not tainted 3.16.0-rc6-test-media #961 [ 403.118418] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 403.118420] ffffffff82a6c9d0 ffff8800af37fb00 ffffffff819916a2 ffffffff82a6c9d0 [ 403.118425] ffff8800af37fb40 ffffffff810d5715 ffff8802308e4200 0000000000000000 [ 403.118429] ffff8802308e4a48 ffff8802308e4a48 ffff8802308e4200 0000000000000001 [ 403.118433] Call Trace: [ 403.118441] [<ffffffff819916a2>] dump_stack+0x4e/0x7a [ 403.118445] [<ffffffff810d5715>] print_circular_bug+0x1d5/0x2a0 [ 403.118449] [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0 [ 403.118455] [<ffffffff8119c172>] ? find_vmap_area+0x42/0x70 [ 403.118459] [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0 [ 403.118463] [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30 [ 403.118468] [<ffffffff810d9da7>] lock_acquire+0xa7/0x160 [ 403.118472] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118476] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118480] [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640 [ 403.118484] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118488] [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118493] [<ffffffff810d8055>] ? mark_held_locks+0x75/0xa0 [ 403.118497] [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core] [ 403.118502] [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev] [ 403.118506] [<ffffffff81197270>] mmap_region+0x3d0/0x5d0 [ 403.118510] [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400 [ 403.118513] [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0 [ 403.118517] [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0 [ 403.118521] [<ffffffff810085c2>] SyS_mmap+0x22/0x30 [ 403.118525] [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b The reason is that vb2_fop_mmap and vb2_fop_get_unmapped_area take the core lock while they are called with the mmap_sem semaphore held. But elsewhere in the code the core lock is taken first but calls to copy_to/from_user() can take the mmap_sem semaphore as well, potentially causing a classical A-B/B-A deadlock. However, the mmap/get_unmapped_area calls really shouldn't take the core lock at all. So what would happen if they don't take the core lock anymore? There are two situations that need to be taken into account: calling mmap while new buffers are being added and calling mmap while buffers are being deleted. The first case works almost fine without a lock: in all cases mmap relies on correctly filled-in q->num_buffers/q->num_planes values and those are only updated by reqbufs and create_buffers *after* any new buffers have been initialized completely. Except in one case: if an error occurred while allocating the buffers it will increase num_buffers and rely on __vb2_queue_free to decrease it again. So there is a short period where the buffer information may be wrong. The second case definitely does pose a problem: buffers may be in the process of being deleted, without the internal structure being updated. In order to fix this a new mutex is added to vb2_queue that is taken when buffers are allocated or deleted, and in vb2_mmap. That way vb2_mmap won't get stale buffer data. Note that this is a problem only for MEMORY_MMAP, so even though __qbuf_userptr and __qbuf_dmabuf also mess around with buffers (mem_priv in particular), this doesn't clash with vb2_mmap or vb2_get_unmapped_area since those are MMAP specific. As an additional bonus the hack in __buf_prepare, the USERPTR case, can be removed as well since mmap() no longer takes the core lock. All in all a much cleaner solution. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] omap3isp: ccdc: Add basic support for interlaced videoLaurent Pinchart1-0/+3
When the CCDC input is interlaced enable the alternate field order on the CCDC output video node. The field signal polarity is specified through platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Enrico Butera <ebutera@users.sourceforge.net> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30[media] media: atmel-isi: add v4l2 async probe supportJosh Wu1-0/+4
Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] rc: Add support for decoding XMP protocolMarcel J.E. Mol1-1/+5
This protocol is found on Dreambox remotes [m.chehab@samsung.com: CodingStyle fixes and conflict fix] Signed-off-by: Marcel Mol <marcel@mesa.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] v4l2: blackfin: select proper pinctrl state in ppi_set_params if ↵Sonic Zhang1-0/+1
CONFIG_PINCTRL is enabled Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral. The driver should select correct group before set up further PPI parameters. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] media: blackfin: ppi: Pass device pointer to request peripheral pinsSonic Zhang1-1/+2
if the pinctrl driver is enabled. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] vmalloc_sg: make sure all pages in vmalloc area are really DMA-readyJames Harper1-0/+3
Patch originally written by Konrad. Rebased on current linux media tree. Under Xen, vmalloc_32() isn't guaranteed to return pages which are really under 4G in machine physical addresses (only in virtual pseudo-physical addresses). To work around this, implement a vmalloc variant which allocates each page with dma_alloc_coherent() to guarantee that each page is suitable for the device in question. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: James Harper <james.harper@ejbdigital.com.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] rc-core: don't use dynamic_pr_debug for IR_dprintk()Mauro Carvalho Chehab1-1/+1
The hole point of IR_dprintk() is that, once a level is given at debug parameter, all enabled IR parsers will show their debug messages. While converting it to dynamic_printk might be a good idea, right now it just makes very hard to debug the drivers, as one needs to both pass debug=1 or debug=2 to rc-core and to use the dynamic printk to enable all the desired lines. That doesn't make sense! So, revert to the old way, as a single line is changed, and the debug parameter will now work as expected. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] v4l2-ctrls: add new RDS TX controlsHans Verkuil1-0/+2
The si4713 supports several RDS features not yet implemented in the driver. This patch adds the missing RDS functionality to the list of RDS controls. The ALT_FREQS control is a compound control containing an array of up to 25 (the maximum according to the RDS standard) frequencies. To support that the V4L2_CTRL_TYPE_U32 was added. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] vb2: fix videobuf2-core.h commentsHans Verkuil1-6/+10
A lot of work was done in vb2 to regulate how drivers and the vb2 core handle buffer ownership, but inexplicably the videobuf2-core.h comments were never updated. Do so now. The same was true for the replacement of the -ENOBUFS mechanism by the min_buffers_needed field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] v4l2-ctrls: add support for setting string controlsHans Verkuil1-0/+24
Rather than always having to use a v4l2_ext_control struct to set a control value from within a driver, switch to just setting the new value. This is faster and it makes it possible to set more complex types such as a string control as is added by this patch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] rc-core: rename dev->scanmask to dev->scancode_maskDavid Härdeman1-2/+3
We already have dev->scancode_filter and dev->scancode_wakeup_filter so rename dev->scanmask to dev->scancode_mask for consistency. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25[media] rc-core: remove protocol arraysDavid Härdeman1-44/+12
The basic API of rc-core used to be: dev = rc_allocate_device(); dev->x = a; dev->y = b; dev->z = c; rc_register_device(); which is a pretty common pattern in the kernel, after the introduction of protocol arrays the API looks something like: dev = rc_allocate_device(); dev->x = a; rc_set_allowed_protocols(dev, RC_BIT_X); dev->z = c; rc_register_device(); There's no real need for the protocols to be an array, so change it back to be consistent (and in preparation for the following patches). [m.chehab@samsung.com: added missing changes at some files] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-23[media] rc-core: document the protocol typeDavid Härdeman1-3/+5
Right now the protocol information is not preserved, rc-core gets handed a scancode but has no idea which protocol it corresponds to. This patch (which required reading through the source/keymap for all drivers, not fun) makes the protocol information explicit which is important documentation and makes it easier to e.g. support multiple protocols with one decoder (think rc5 and rc-streamzap). The information isn't used yet so there should be no functional changes. [m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-23[media] rc-core: improve ir-kbd-i2c get_key functionsDavid Härdeman2-2/+14
The arguments used for ir-kbd-i2c's get_key() functions are not really suited for rc-core and the ir_raw/ir_key distinction is just confusing. Convert all of them to return a protocol/scancode/toggle triple instead. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-22[media] v4l2-mem2mem: export v4l2_m2m_try_scheduleMichael Olbrich1-0/+2
Some drivers might allow to decode remaining frames from an internal ringbuffer after a decoder stop command. Allow those to call v4l2_m2m_try_schedule directly. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21[media] v4l: ctrls: Unlocked variants of v4l2_ctrl_s_ctrl{,_int64}()Sakari Ailus1-2/+25
Implement unlocked variants of v4l2_ctrl_s_ctrl() and v4l2_ctrl_s_ctrl_int64(). As drivers need to set controls as they access driver internal state elsewhere than in the control framework unlocked variants of these functions become handy. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>