| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* for-next/read-barrier-depends:
: Allow architectures to override __READ_ONCE()
arm64: Reduce the number of header files pulled into vmlinux.lds.S
compiler.h: Move compiletime_assert() macros into compiler_types.h
checkpatch: Remove checks relating to [smp_]read_barrier_depends()
include/linux: Remove smp_read_barrier_depends() from comments
tools/memory-model: Remove smp_read_barrier_depends() from informal doc
Documentation/barriers/kokr: Remove references to [smp_]read_barrier_depends()
Documentation/barriers: Remove references to [smp_]read_barrier_depends()
locking/barriers: Remove definitions for [smp_]read_barrier_depends()
alpha: Replace smp_read_barrier_depends() usage with smp_[r]mb()
vhost: Remove redundant use of read_barrier_depends() barrier
asm/rwonce: Don't pull <asm/barrier.h> into 'asm-generic/rwonce.h'
asm/rwonce: Remove smp_read_barrier_depends() invocation
alpha: Override READ_ONCE() with barriered implementation
asm/rwonce: Allow __READ_ONCE to be overridden by the architecture
compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h
tools: bpf: Use local copy of headers including uapi/linux/filter.h
|
|
'for-next/cpufeature', 'for-next/acpi', 'for-next/perf', 'for-next/timens', 'for-next/msi-iommu' and 'for-next/trivial' into for-next/core
* for-next/misc:
: Miscellaneous fixes and cleanups
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.
arm64: Reserve HWCAP2_MTE as (1 << 18)
arm64/entry: deduplicate SW PAN entry/exit routines
arm64: s/AMEVTYPE/AMEVTYPER
arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs
arm64: stacktrace: Move export for save_stack_trace_tsk()
smccc: Make constants available to assembly
arm64/mm: Redefine CONT_{PTE, PMD}_SHIFT
arm64/defconfig: Enable CONFIG_KEXEC_FILE
arm64: Document sysctls for emulated deprecated instructions
arm64/panic: Unify all three existing notifier blocks
arm64/module: Optimize module load time by optimizing PLT counting
* for-next/vmcoreinfo:
: Export the virtual and physical address sizes in vmcoreinfo
arm64/crash_core: Export TCR_EL1.T1SZ in vmcoreinfo
crash_core, vmcoreinfo: Append 'MAX_PHYSMEM_BITS' to vmcoreinfo
* for-next/cpufeature:
: CPU feature handling cleanups
arm64/cpufeature: Validate feature bits spacing in arm64_ftr_regs[]
arm64/cpufeature: Replace all open bits shift encodings with macros
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR2 register
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR0 register
* for-next/acpi:
: ACPI updates for arm64
arm64/acpi: disallow writeable AML opregion mapping for EFI code regions
arm64/acpi: disallow AML memory opregions to access kernel memory
* for-next/perf:
: perf updates for arm64
arm64: perf: Expose some new events via sysfs
tools headers UAPI: Update tools's copy of linux/perf_event.h
arm64: perf: Add cap_user_time_short
perf: Add perf_event_mmap_page::cap_user_time_short ABI
arm64: perf: Only advertise cap_user_time for arch_timer
arm64: perf: Implement correct cap_user_time
time/sched_clock: Use raw_read_seqcount_latch()
sched_clock: Expose struct clock_read_data
arm64: perf: Correct the event index in sysfs
perf/smmuv3: To simplify code for ioremap page in pmcg
* for-next/timens:
: Time namespace support for arm64
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
arm64/vdso: Add time namespace page
arm64/vdso: Zap vvar pages when switching to a time namespace
arm64/vdso: use the fault callback to map vvar pages
* for-next/msi-iommu:
: Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the
: MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter
: and apply the resulting changes to the device ID space provided by the
: Freescale FSL bus
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
* for-next/trivial:
: Trivial fixes
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
|
|
There is nothing PCI bus specific in the of_msi_map_rid()
implementation other than the requester ID tag for the input
ID space. Rename requester ID to a more generic ID so that
the translation code can be used by all busses that require
input/output ID translations.
No functional change intended.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200619082013.13661-11-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
of_msi_map_get_device_domain() is PCI specific but it need not be and
can be easily changed to be bus agnostic in order to be used by other
busses by adding an IRQ domain bus token as an input parameter.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200619082013.13661-10-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Devices sitting on proprietary busses have a device ID space that
is owned by the respective bus and related firmware bindings. In order
to let the generic OF layer handle the input translations to
an IOMMU id, for such busses the current of_dma_configure() interface
should be extended in order to allow the bus layer to provide the
device input id parameter - that is retrieved/assigned in bus
specific code and firmware.
Augment of_dma_configure() to add an optional input_id parameter,
leaving current functionality unchanged.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is nothing PCI specific (other than the RID - requester ID)
in the of_map_rid() implementation, so the same function can be
reused for input/output IDs mapping for other busses just as well.
Rename the RID instances/names to a generic "id" tag.
No functionality change intended.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Some HW devices are created as child devices of proprietary busses,
that have a bus specific policy defining how the child devices
wires representing the devices ID are translated into IOMMU and
IRQ controllers device IDs.
Current IORT code provides translations for:
- PCI devices, where the device ID is well identified at bus level
as the requester ID (RID)
- Platform devices that are endpoint devices where the device ID is
retrieved from the ACPI object IORT mappings (Named components single
mappings). A platform device is represented in IORT as a named
component node
For devices that are child devices of proprietary busses the IORT
firmware represents the bus node as a named component node in IORT
and it is up to that named component node to define in/out bus
specific ID translations for the bus child devices that are
allocated and created in a bus specific manner.
In order to make IORT ID translations available for proprietary
bus child devices, the current ACPI (and IORT) code must be
augmented to provide an additional ID parameter to acpi_dma_configure()
representing the child devices input ID. This ID is bus specific
and it is retrieved in bus specific code.
By adding an ID parameter to acpi_dma_configure(), the IORT
code can map the child device ID to an IOMMU stream ID through
the IORT named component representing the bus in/out ID mappings.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is nothing PCI specific in iort_msi_map_rid().
Rename the function using a bus protocol agnostic name,
iort_msi_map_id(), and convert current callers to it.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
iort_get_device_domain() is PCI specific but it need not be,
since it can be used to retrieve IRQ domain nexus of any kind
by adding an irq_domain_bus_token input to it.
Make it PCI agnostic by also renaming the requestor ID input
to a more generic ID name.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The kernel test robot reports that moving READ_ONCE() out into its own
header breaks a W=1 build for parisc, which is relying on the definition
of compiletime_assert() being available:
| In file included from ./arch/parisc/include/generated/asm/rwonce.h:1,
| from ./include/asm-generic/barrier.h:16,
| from ./arch/parisc/include/asm/barrier.h:29,
| from ./arch/parisc/include/asm/atomic.h:11,
| from ./include/linux/atomic.h:7,
| from kernel/locking/percpu-rwsem.c:2:
| ./arch/parisc/include/asm/atomic.h: In function 'atomic_read':
| ./include/asm-generic/rwonce.h:36:2: error: implicit declaration of function 'compiletime_assert' [-Werror=implicit-function-declaration]
| 36 | compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
| 49 | compiletime_assert_rwonce_type(x); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/parisc/include/asm/atomic.h:73:9: note: in expansion of macro 'READ_ONCE'
| 73 | return READ_ONCE((v)->counter);
| | ^~~~~~~~~
Move these macros into compiler_types.h, so that they are available to
READ_ONCE() and friends.
Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-July/587094.html
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
smp_read_barrier_depends() doesn't exist any more, so reword the two
comments that mention it to refer to "dependency ordering" instead.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that 'smp_read_barrier_depends()' has gone the way of the Norwegian
Blue, drop the inclusion of <asm/barrier.h> in 'asm-generic/rwonce.h'.
This requires fixups to some architecture vdso headers which were
previously relying on 'asm/barrier.h' coming in via 'linux/compiler.h'.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for allowing architectures to define their own
implementation of the READ_ONCE() macro, move the generic
{READ,WRITE}_ONCE() definitions out of the unwieldy 'linux/compiler.h'
file and into a new 'rwonce.h' header under 'asm-generic'.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to support perf_event_mmap_page::cap_time features, an
architecture needs, aside from a userspace readable counter register,
to expose the exact clock data so that userspace can convert the
counter register into a correct timestamp.
Provide struct clock_read_data and two (seqcount) helpers so that
architectures (arm64 in specific) can expose the numbers to userspace.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-2-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Move constants out of the C-only section of the header next to the other
constants that are available to assembly.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200618145511.69203-1-ascull@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"A single DocBook fix"
* tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix kerneldoc system_device_crosststamp & al
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
"The most anticipated fix in this pull request is probably the horrible
build fix for the RANDSTRUCT fail that didn't make -rc2. Also included
is the cleanup that removes those BUILD_BUG_ON()s and replaces it with
ugly unions.
Also included is the try_to_wake_up() race fix that was first
triggered by Paul's RCU-torture runs, but was independently hit by
Dave Chinner's fstest runs as well"
* tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: change initial value of runnable_avg
smp, irq_work: Continue smp_call_function*() and irq_work*() integration
sched/core: s/WF_ON_RQ/WQ_ON_CPU/
sched/core: Fix ttwu() race
sched/core: Fix PI boosting between RT and DEADLINE tasks
sched/deadline: Initialize ->dl_boosted
sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption
sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD Memory bandwidth counter width fix, by Babu Moger.
- Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
- Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by
Sean Christopherson.
- Fix a static checker warning in the resctrl code, by Dan Carpenter.
- Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
- Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
* tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/64: Align start of __clear_user() loop to 16-bytes
x86/cpu: Use pinning mask for CR4 bits needing to be 0
x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()
x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup
syscalls: Fix offset type of ksys_ftruncate()
x86/resctrl: Fix memory bandwidth counter width for AMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
|
|
Instead of relying on BUG_ON() to ensure the various data structures
line up, use a bunch of horrible unions to make it all automatic.
Much of the union magic is to ensure irq_work and smp_call_function do
not (yet) see the members of their respective data structures change
name.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
|
|
As a temporary build fix, the proper cleanup needs more work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Suggested-by: Kees Cook <keescook@chromium.org>
Fixes: a148866489fb ("sched: Replace rq::wake_list")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5bcc ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- fix dma coherent mmap in nommu (me)
- more AMD SEV fallout (David Rientjes, me)
- fix alignment in dma_common_*_remap (Eric Auger)
* tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-remap: align the size in dma_common_*_remap()
dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR
dma-direct: add missing set_memory_decrypted() for coherent mapping
dma-direct: check return value when encrypting or decrypting memory
dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails
dma-direct: always align allocation size in dma_direct_alloc_pages()
dma-direct: mark __dma_direct_alloc_pages static
dma-direct: re-enable mmap for !CONFIG_MMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fixes from Daniel Thompson:
"The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb
(pure kgdb debugging does not use the console system at all). On
systems with an NMI then kdb, if it is enabled, must get messages to
the user despite potentially running from some "difficult" calling
contexts. These fixes avoid using the console system where we have
been provided an alternative (safer) way to interact with the user
and, if using the console system in unavoidable, use oops_in_progress
for deadlock avoidance. These fixes also ensure kdb honours the
console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read
lock to avoids triggering diagnostic warnings. This is a wide lock
scope but this is OK because kgdb is a stop-the-world debugger. When
we stop the world we put all the CPUs into holding pens and this
inhibits RCU update anyway"
* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Avoid suspicious RCU usage warning
kdb: Switch to use safer dbg_io_ops over console APIs
kdb: Make kdb_printf() console handling more robust
kdb: Check status of console prior to invoking handlers
kdb: Re-factor kdb_printf() message write code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of Intel VT-d fixes:
- Make Intel SVM code 64bit only. The code uses pgd_t* and the IOMMU
only supports long-mode page-table formats, so its broken on 32bit
anyway.
- Make sure GFX quirks in for Intel VT-d are not applied to untrusted
devices. Those devices might gain full memory access otherwise.
- Identity mapping setup fix.
- Fix ACS enabling when Intel IOMMU is off and untrusted devices are
detected.
- Two smaller fixes for coherency and IO page-table setup"
* tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix misuse of iommu_domain_identity_map()
iommu/vt-d: Update scalable mode paging structure coherency
iommu/vt-d: Enable PCI ACS for platform opt in hint
iommu/vt-d: Don't apply gfx quirks to untrusted devices
iommu/vt-d: Set U/S bit in first level page table by default
iommu/vt-d: Make Intel SVM code 64-bit only
|
|
Pull drm fixes from Dave Airlie:
"Usual rc3 pickup, lots of little fixes all over.
The core VT registration regression fix is probably the largest,
otherwise ttm, amdgpu and tegra are the bulk, with some minor driver
fixes.
No i915 pull this week which may or may not mean I get 2x of it next
week, we'll see how it goes.
core:
- fix VT registration regression
ttm:
- fix two fence leaks
amdgpu:
- Fix missed mutex unlock in DC error path
- Fix firmware leak for sdma5
- DC bpc property fixes
amdkfd:
- Fix memleak in an error path
radeon:
- Fix copy paste typo in NI DPM spll validation
rcar-du:
- build fix
tegra:
- add missing zpos property
- child driver registeration fix
- debugfs cleanup fix
- doc fix
mcde:
- reorder fbdev setup
panel:
- fix connector type
- fix orienation for some panels
sun4i:
- fix dma/iommu configuration
uvesafb:
- respect blank flag"
* tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amd: fix potential memleak in err branch
drm/amd/display: Fix ineffective setting of max bpc property
drm/amd/display: Enable output_bpc property on all outputs
drm/amdgpu: add fw release for sdma v5_0
drm/fb-helper: Fix vt restore
drm/radeon: fix fb_div check in ni_init_smc_spll_table()
drm/amdgpu/display: Unlock mutex on error
drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU
drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003
drm: panel-orientation-quirks: Add quirk for Asus T101HA panel
video: fbdev: uvesafb: fix "noblank" option handling
drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxl
drm/panel-simple: fix connector type for LogicPD Type28 Display
drm: rcar-du: Fix build error
drm: mcde: Fix forgotten user of drm->dev_private
drm: mcde: Fix display initialization problem
drm/tegra: Add zpos property for cursor planes
gpu: host1x: Detach driver on unregister
gpu: host1x: Correct trivial kernel-doc inconsistencies
drm/tegra: hub: Register child devices
...
|
|
Merge misx fixes from Andrew Morton:
"31 patches.
Subsystems affected by this patch series: hotfixes, mm/pagealloc,
kexec, ocfs2, lib, mm/slab, mm/slab, mm/slub, mm/swap, mm/pagemap,
mm/vmalloc, mm/memcg, mm/gup, mm/thp, mm/vmscan, x86,
mm/memory-hotplug, MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
MAINTAINERS: update info for sparse
mm/memory_hotplug.c: fix false softlockup during pfn range removal
mm: remove vmalloc_exec
arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page
x86/hyperv: allocate the hypercall page with only read and execute bits
mm/memory: fix IO cost for anonymous page
mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
mm: workingset: age nonresident information alongside anonymous pages
doc: THP CoW fault no longer allocate THP
docs: mm/gup: minor documentation update
mm/memcontrol.c: prevent missed memory.low load tears
mm/memcontrol.c: add missed css_put()
mm: memcontrol: handle div0 crash race condition in memory.low
mm/vmalloc.c: fix a warning while make xmldocs
media: omap3isp: remove cacheflush.h
make asm-generic/cacheflush.h more standalone
mm/debug_vm_pgtable: fix build failure with powerpc 8xx
mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
mm: fix swap cache node allocation mask
slub: cure list_slab_objects() from double fix
...
|
|
In kgdb context, calling console handlers aren't safe due to locks used
in those handlers which could in turn lead to a deadlock. Although, using
oops_in_progress increases the chance to bypass locks in most console
handlers but it might not be sufficient enough in case a console uses
more locks (VT/TTY is good example).
Currently when a driver provides both polling I/O and a console then kdb
will output using the console. We can increase robustness by using the
currently active polling I/O driver (which should be lockless) instead
of the corresponding console. For several common cases (e.g. an
embedded system with a single serial port that is used both for console
output and debugger I/O) this will result in no console handler being
used.
In order to achieve this we need to reverse the order of preference to
use dbg_io_ops (uses polling I/O mode) over console APIs. So we just
store "struct console" that represents debugger I/O in dbg_io_ops and
while emitting kdb messages, skip console that matches dbg_io_ops
console in order to avoid duplicate messages. After this change,
"is_console" param becomes redundant and hence removed.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1591264879-25920-5-git-send-email-sumit.garg@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Conflicts:
arch/x86/kernel/traps.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge vmalloc_exec into its only caller. Note that for !CONFIG_MMU
__vmalloc_node_range maps to __vmalloc, which directly clears the
__GFP_HIGHMEM added by the vmalloc_exec stub anyway.
Link: http://lkml.kernel.org/r/20200618064307.32739-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "fix for "mm: balance LRU lists based on relative
thrashing" patchset"
This patchset fixes some problems of the patchset, "mm: balance LRU
lists based on relative thrashing", which is now merged on the mainline.
Patch "mm: workingset: let cache workingset challenge anon fix" is the
result of discussion with Johannes. See following link.
http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org
And, the other two are minor things which are found when I try to rebase
my patchset.
This patch (of 3):
After ("mm: workingset: let cache workingset challenge anon fix"), we
compare refault distances to active_file + anon. But age of the
non-resident information is only driven by the file LRU. As a result,
we may overestimate the recency of any incoming refaults and activate
them too eagerly, causing unnecessary LRU churn in certain situations.
Make anon aging drive nonresident age as well to address that.
Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com
Fixes: 34e58cac6d8f2a ("mm: workingset: let cache workingset challenge anon")
Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several regression fixes from work that landed in the merge window,
particularly in the mlx5 driver:
- Various static checker and warning fixes
- General bug fixes in rvt, qedr, hns, mlx5 and hfi1
- Several regression fixes related to the ECE and QP changes in last
cycle
- Fixes for a few long standing crashers in CMA, uverbs ioctl, and
xrc"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
IB/hfi1: Add atomic triggered sleep/wakeup
IB/hfi1: Correct -EBUSY handling in tx code
IB/hfi1: Fix module use count flaw due to leftover module put calls
IB/hfi1: Restore kfree in dummy_netdev cleanup
IB/mad: Fix use after free when destroying MAD agent
RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata
RDMA/counter: Query a counter before release
RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()
RDMA/mlx5: Fix integrity enabled QP creation
RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs
RDMA/mlx5: Fix remote gid value in query QP
RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path
RDMA/core: Check that type_attrs is not NULL prior access
RDMA/hns: Fix an cmd queue issue when resetting
RDMA/hns: Fix a calltrace when registering MR from userspace
RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake
RDMA/cma: Protect bind_list and listen_list while finding matching cm id
RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532
RDMA/efa: Set maximum pkeys device attribute
RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq
...
|
|
A KCSAN build revealed we have explicit annoations through atomic_*()
usage, switch to arch_atomic_*() for the respective functions.
vmlinux.o: warning: objtool: rcu_nmi_exit()+0x4d: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_nmi_enter()+0x4f: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x2a: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rcu_is_watching()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
Additionally, without the NOP in instrumentation_begin(), objtool would
not detect the lack of the 'else instrumentation_begin();' branch in
rcu_nmi_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Architectures with instrumented (KASAN/KCSAN) atomic operations
natively provide arch_atomic_ variants that are not instrumented.
It turns out that some generic code also requires arch_atomic_ in
order to avoid instrumentation, so provide the arch_atomic_ interface
as a direct map into the regular atomic_ interface for
non-instrumented architectures.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.8-rc3
This contains a fairly random assortment of fixes for various minor
issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624165254.2763104-1-thierry.reding@gmail.com
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We not only need the stub when libata is disabled, but also if it is
modular and there are built-in SAS drivers (which can happen when
SCSI_SAS_ATA is disabled).
Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de
Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.
Misc: replace open-coded constants with common defines.
Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- NULL dereference in octeontx
- PM reference imbalance in ks-sa
- deadlock in crypto manager
- memory leak in drbg
- missing socket limit check on receive SG list size in algif_skcipher
- typos in caam
- warnings in ccp and hisilicon
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - always try to free Jitter RNG instance
crypto: marvell/octeontx - Fix a potential NULL dereference
crypto: algboss - don't wait during notifier callback
crypto: caam - fix typos
crypto: ccp - Fix sparse warnings in sev-dev
crypto: hisilicon - Cap block size at 2^31
crypto: algif_skcipher - Cap recv SG list at ctx->used
hwrng: ks-sa - Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a 5.7 regression fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
scsi: ufs-bsg: Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
|
