| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix an integer overflow in the NTP RTC synchronization which led to
the latter happening every 2 seconds instead of the intended every 11
minutes.
- Get rid of now unused get_seconds().
* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Fix RTC synchronization on 32-bit platforms
timekeeping: Remove unused get_seconds()
|
|
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
|
|
The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>
This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.
So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>
[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/
Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Cc: stable@vger.kernel.org
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
|
|
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
|
|
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: MAINTAINERS and mm (slub,
pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
and process_vm_access)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/process_vm_access.c: include compat.h
mm,hwpoison: fix printing of page flags
MAINTAINERS: add Vlastimil as slab allocators maintainer
mm/hugetlb: fix potential missing huge page size info
mm: migrate: initialize err in do_migrate_pages
mm/vmalloc.c: fix potential memory leak
arm/kasan: fix the array size of kasan_early_shadow_pte[]
mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
mm, slub: consider rest of partial list if acquire_slab() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
|
|
GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.
Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.
Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
|
|
This reverts commit 367c820ef08082e68df8a3bc12e62393af21e4b5.
lockup_detector_init() makes heavy use of per-cpu variables and must be
called with preemption disabled. Usually, it's handled early during boot
in kernel_init_freeable(), before SMP has been initialised.
Since we do not know whether or not our PMU interrupt can be signalled
as an NMI until considerably later in the boot process, the Arm PMU
driver attempts to re-initialise the lockup detector off the back of a
device_initcall(). Unfortunately, this is called from preemptible
context and results in the following splat:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is debug_smp_processor_id+0x20/0x2c
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x3c0
| show_stack+0x20/0x6c
| dump_stack+0x2f0/0x42c
| check_preemption_disabled+0x1cc/0x1dc
| debug_smp_processor_id+0x20/0x2c
| hardlockup_detector_event_create+0x34/0x18c
| hardlockup_detector_perf_init+0x2c/0x134
| watchdog_nmi_probe+0x18/0x24
| lockup_detector_init+0x44/0xa8
| armv8_pmu_driver_init+0x54/0x78
| do_one_initcall+0x184/0x43c
| kernel_init_freeable+0x368/0x380
| kernel_init+0x1c/0x1cc
| ret_from_fork+0x10/0x30
Rather than bodge this with raw_smp_processor_id() or randomly disabling
preemption, simply revert the culprit for now until we figure out how to
do this properly.
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com
Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The size of kasan_early_shadow_pte[] now is PTRS_PER_PTE which defined
to 512 for arm. This means that it only covers the prev Linux pte
entries, but not the HWTABLE pte entries for arm.
The reason it currently works is that the symbol kasan_early_shadow_page
immediately following kasan_early_shadow_pte in memory is page aligned,
which makes kasan_early_shadow_pte look like a 4KB size array. But we
can't ensure the order is always right with different compiler/linker,
or if more bss symbols are introduced.
We had a test with QEMU + vexpress：put a 512KB-size symbol with
attribute __section(".bss..page_aligned") after kasan_early_shadow_pte,
and poisoned it after kasan_early_init(). Then enabled CONFIG_KASAN, it
failed to boot up.
Link: https://lkml.kernel.org/r/20210109044622.8312-1-hailongliiu@yeah.net
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Ziliang Guo <guo.ziliang@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Boot a CONFIG_MEMCG=y kernel with "cgroup_disabled=memory" and you are
met by a series of warnings from the VM_WARN_ON_ONCE_PAGE(!memcg, page)
recently added to the inline mem_cgroup_page_lruvec().
An earlier attempt to place that warning, in mem_cgroup_lruvec(), had
been careful to do so after weeding out the mem_cgroup_disabled() case;
but was itself invalid because of the mem_cgroup_lruvec(NULL, pgdat) in
clear_pgdat_congested() and age_active_anon().
Warning in mem_cgroup_page_lruvec() was once useful in detecting a KSM
charge bug, so may be worth keeping: but skip if mem_cgroup_disabled().
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101032056260.1093@eggly.anvils
Fixes: 9a1ac2288cf1 ("mm/memcontrol:rewrite mem_cgroup_page_lruvec()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hui Su <sh_def@163.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The get_seconds() cleanup seems to have been completed, now it is
time to delete the legacy interface to avoid misuse later.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1606816351-26900-1-git-send-email-brookxu@tencent.com
|
|
skb_seq_read iterates over an skb, returning pointer and length of
the next data range with each call.
It relies on kmap_atomic to access highmem pages when needed.
An skb frag may be backed by a compound page, but kmap_atomic maps
only a single page. There are not enough kmap slots to always map all
pages concurrently.
Instead, if kmap_atomic is needed, iterate over each page.
As this increases the number of calls, avoid this unless needed.
The necessary condition is captured in skb_frag_must_loop.
I tried to make the change as obvious as possible. It should be easy
to verify that nothing changes if skb_frag_must_loop returns false.
Tested:
On an x86 platform with
CONFIG_HIGHMEM=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
Run
ip link set dev lo mtu 1500
iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT
dd if=/dev/urandom of=in bs=1M count=20
nc -l -p 8000 > /dev/null &
nc -w 1 -q 0 localhost 8000 < in
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Skb frags may be backed by highmem and/or compound pages. Highmem
pages need kmap_atomic mappings to access. But kmap_atomic maps a
single page, not the entire compound page.
skb_foreach_page iterates over an skb frag, in one step in the common
case, page by page only if kmap_atomic must be called for each page.
The decision logic is captured in skb_frag_must_loop.
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all
pages, to increase code coverage.
Extend skb_frag_must_loop to this new condition.
Link: https://lore.kernel.org/linux-mm/20210106180132.41dc249d@gandalf.local.home/
Fixes: 0e91a0c6984c ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As expected, fixes started trickling in after the holidays so here is
the accumulated pile of x86 fixes for 5.11:
- A fix for fanotify_mark() missing the conversion of x86_32 native
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page()
where a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and
not the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper
MTRR type, when the end address is the same as top of memory.
(Ying-Tsun Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)"
* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't move a task to the same resource group
x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
x86/mtrr: Correct the range check before performing MTRR type lookups
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
x86/mm: Fix leak of pmd ptlock
fanotify: Fix sys_fanotify_mark() on native x86-32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address two build issues and drop confusing text from a couple
of Kconfig entries.
Specifics:
- Drop two local variables that are never read and the code updating
their values from the x86 suspend-to-idle code (Rafael Wysocki)
- Add empty stub of an ACPI helper function to avoid build issues
when CONFIG_ACPI is not set (Shawn Guo)
- Remove confusing text regarding modules from Kconfig entries that
correspond to non-modular code (Peter Robinson)"
* tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Update Kconfig help text for items that are no longer modular
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
ACPI: PM: s2idle: Drop unused local variables and related code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"This is mainly all Intel VT-D stuff, but there are some fixes for AMD
and ARM as well.
We've also got the revert I promised during the merge window, which
removes a temporary hack to accomodate i915 while we transitioned the
Intel IOMMU driver over to the common DMA-IOMMU API.
Finally, there are still a couple of other VT-D fixes floating around,
so I expect to send you another batch of fixes next week.
Summary:
- Fix VT-D TLB invalidation for subdevices
- Fix VT-D use-after-free on subdevice detach
- Fix VT-D locking so that IRQs are disabled during SVA bind/unbind
- Fix VT-D address alignment when flushing IOTLB
- Fix memory leak in VT-D IRQ remapping failure path
- Revert temporary i915 sglist hack now that it is no longer required
- Fix sporadic boot failure with Arm SMMU on Qualcomm SM8150
- Fix NULL dereference in AMD IRQ remapping code with remapping disabled
- Fix accidental enabling of irqs on AMD resume-from-suspend path
- Fix some typos in comments"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Fix ineffective devTLB invalidation for subdevices
iommu/vt-d: Fix general protection fault in aux_detach_device()
iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev
iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context
iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
Revert "iommu: Add quirk for Intel graphic devices in map_sg"
iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()
iommu/amd: Stop irq_remapping_select() matching when remapping is disabled
iommu/amd: Set iommu->int_enabled consistently when interrupts are set up
iommu/intel: Fix memleak in intel_irq_remapping_alloc
iommu/iova: fix 'domain' typos
|
|
With external metadata device, flush requests are not passed down to the
data device.
Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.
Reported-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Slightly lighter pull request to get back into the Thursday cadence.
Current release - always broken:
- can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions
- dsa: hellcreek: fix led_classdev build errors
Previous releases - regressions:
- ipv6: fib: flush exceptions when purging route to avoid netdev
reference leak
- ip_tunnels: fix pmtu check in nopmtudisc mode
- ip: always refragment ip defragmented packets to avoid MTU issues
when forwarding through tunnels, correct "packet too big" message
is prohibitively tricky to generate
- s390/qeth: fix locking for discipline setup / removal and during
recovery to prevent both deadlocks and races
- mlx5: Use port_num 1 instead of 0 when delete a RoCE address
Previous releases - always broken:
- cdc_ncm: correct overhead calculation in delayed_ndp_size to
prevent out of bound accesses with Huawei 909s-120 LTE module
- fix stmmac dwmac-sun8i suspend/resume:
- PHY being left powered off
- MAC syscon configuration being reset
- reference to the reset controller being improperly dropped
- qrtr: fix null-ptr-deref in qrtr_ns_remove
- can: tcan4x5x: fix bittiming const, use common bittiming from m_can
driver
- mlx5e: CT: Use per flow counter when CT flow accounting is enabled
- mlx5e: Fix SWP offsets when vlan inserted by driver
Misc:
- bpf: Fix a task_iter bug caused by a bpf -> net merge conflict
resolution
And the usual many fixes to various error paths"
* tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE
s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
s390/qeth: fix locking for discipline setup / removal
s390/qeth: fix deadlock during recovery
selftests: fib_nexthops: Fix wrong mausezahn invocation
nexthop: Bounce NHA_GATEWAY in FDB nexthop groups
nexthop: Unlink nexthop group entry in error path
nexthop: Fix off-by-one error in error path
octeontx2-af: fix memory leak of lmac and lmac->name
chtls: Fix chtls resources release sequence
chtls: Added a check to avoid NULL pointer dereference
chtls: Replace skb_dequeue with skb_peek
chtls: Avoid unnecessary freeing of oreq pointer
chtls: Fix panic when route to peer not configured
chtls: Remove invalid set_tcb call
chtls: Fix hardware tid leak
net: ip: always refragment ip defragmented packets
net: fix pmtu check in nopmtudisc mode
selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking
docs: octeontx2: tune rst markup
...
|
|
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.
Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The aux-domain attach/detach are not tracked, some data structures might
be used after free. This causes general protection faults when multiple
subdevices are created and assigned to a same guest machine:
| general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI
| RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0
| [...]
| Call Trace:
| iommu_aux_detach_device+0x24/0x70
| vfio_mdev_detach_domain+0x3b/0x60
| ? vfio_mdev_set_domain+0x50/0x50
| iommu_group_for_each_dev+0x4f/0x80
| vfio_iommu_detach_group.isra.0+0x22/0x30
| vfio_iommu_type1_detach_group.cold+0x71/0x211
| ? find_exported_symbol_in_section+0x4a/0xd0
| ? each_symbol_section+0x28/0x50
| __vfio_group_unset_container+0x4d/0x150
| vfio_group_try_dissolve_container+0x25/0x30
| vfio_group_put_external_user+0x13/0x20
| kvm_vfio_group_put_external_user+0x27/0x40 [kvm]
| kvm_vfio_destroy+0x45/0xb0 [kvm]
| kvm_put_kvm+0x1bb/0x2e0 [kvm]
| kvm_vm_release+0x22/0x30 [kvm]
| __fput+0xcc/0x260
| ____fput+0xe/0x10
| task_work_run+0x8f/0xb0
| do_exit+0x358/0xaf0
| ? wake_up_state+0x10/0x20
| ? signal_wake_up_state+0x1a/0x30
| do_group_exit+0x47/0xb0
| __x64_sys_exit_group+0x18/0x20
| do_syscall_64+0x57/0x1d0
| entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix the crash by tracking the subdevices when attaching and detaching
aux-domains.
Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach")
Co-developed-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
'struct intel_svm' is shared by all devices bound to a give process,
but records only a single pointer to a 'struct intel_iommu'. Consequently,
cache invalidations may only be applied to a single DMAR unit, and are
erroneously skipped for the other devices.
In preparation for fixing this, rework the structures so that the iommu
pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm'
to track them in its device list.
Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode")
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Raj Ashok <ashok.raj@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: Guo Kaijie <Kaijie.Guo@intel.com>
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Cc: stable@vger.kernel.org # v5.0+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid
cluttering the code, hide them in kcov helpers instead.
Fixes: aee9ddb1d371 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit 36dadef23fcc ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
|
|
Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
"Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"
Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.
* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
|
|
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
|
|
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone: 89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone: 89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit 73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Otherwise it causes a gcc warning:
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.
Adding a prototype will silence the warning.
Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 14dc3983b5dff513a90bd5a8cc90acaf7867c3d0.
Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
"I guess what you propose is simpler, but might still have corner cases
where we still get warnings. In particular, if some file (for whatever
reason) does not include build_bug.h and uses a raw _Static_assert(),
then we still get warnings. E.g. I see 1 user of raw _Static_assert()
(drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."
I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.
Even after commit 14dc3983b5df ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.
---------------->8----------------
#include <linux/export.h>
_Static_assert((1 ?: 0), "");
void foo(void) { }
EXPORT_SYMBOL(foo);
---------------->8----------------
WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.
Now that commit 869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.
Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Avoid -Wunused-const-variable warnings for "make W=1".
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Commit
121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.
[ bp: Fix typo in Kconfig help text. ]
Fixes: 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: Paweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- A series from Prashant for Type-C to implement TYPEC_STATUS,
parsing USB PD Partner ID VDOs, and registering partner altmodes.
cros_ec misc:
- Don't treat RTC events as wakeup sources in cros_ec_proto"
* tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Tolerate unrecognized mux flags
platform/chrome: cros_ec_typec: Register partner altmodes
platform/chrome: cros_ec_typec: Parse partner PD ID VDOs
platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS
platform/chrome: cros_ec: Import Type C host commands
platform/chrome: cros_ec_typec: Clear partner identity on device removal
platform/chrome: cros_ec_typec: Fix remove partner logic
platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions
platform/chrome: Don't treat RTC events as wakeup sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
|
|
Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
|
