summaryrefslogtreecommitdiffstats
path: root/include/kvm
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16Merge branch kvm-arm64/per-vcpu-host-pmu-data into kvmarm-master/nextMarc Zyngier1-2/+32
* kvm-arm64/per-vcpu-host-pmu-data: : . : Pass the host PMU state in the vcpu to avoid the use of additional : shared memory between EL1 and EL2 (this obviously only applies : to nVHE and Protected setups). : : Patches courtesy of Fuad Tabba. : . KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected KVM: arm64: Reenable pmu in Protected Mode KVM: arm64: Pass pmu events to hyp via vcpu KVM: arm64: Repack struct kvm_pmu to reduce size KVM: arm64: Wrapper for getting pmu_events Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-16Merge branch kvm-arm64/vgic-invlpir into kvmarm-master/nextMarc Zyngier1-2/+6
* kvm-arm64/vgic-invlpir: : . : Implement MMIO-based LPI invalidation for vGICv3. : . KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIs irqchip/gic-v3: Exposes bit values for GICR_CTLR.{IR, CES} Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-16Merge branch kvm-arm64/hcall-selection into kvmarm-master/nextMarc Zyngier2-7/+8
* kvm-arm64/hcall-selection: : . : Introduce a new set of virtual sysregs for userspace to : select the hypercalls it wants to see exposed to the guest. : : Patches courtesy of Raghavendra and Oliver. : . KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace Documentation: Fix index.rst after psci.rst renaming selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list selftests: KVM: aarch64: Introduce hypercall ABI test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test tools: Import ARM SMCCC definitions Docs: KVM: Add doc for the bitmap firmware registers Docs: KVM: Rename psci.rst to hypercalls.rst KVM: arm64: Add vendor hypervisor firmware register KVM: arm64: Add standard hypervisor firmware register KVM: arm64: Setup a framework for hypercall bitmap firmware registers KVM: arm64: Factor out firmware register handling from psci.c Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-16KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selectedMarc Zyngier1-0/+24
Moving kvm_pmu_events into the vcpu (and refering to it) broke the somewhat unusual case where the kernel has no support for a PMU at all. In order to solve this, move things around a bit so that we can easily avoid refering to the pmu structure outside of PMU-aware code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS isn't selected. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
2022-05-15KVM: arm64: Pass pmu events to hyp via vcpuFuad Tabba1-0/+6
Instead of the host accessing hyp data directly, pass the pmu events of the current cpu to hyp via the vcpu. This adds 64 bits (in two fields) to the vcpu that need to be synced before every vcpu run in nvhe and protected modes. However, it isolates the hypervisor from the host, which allows us to use pmu in protected mode in a subsequent patch. No visible side effects in behavior intended. Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
2022-05-15KVM: arm64: Repack struct kvm_pmu to reduce sizeFuad Tabba1-2/+2
struct kvm_pmu has 2 holes using 10 bytes. This is instantiated in all vcpus, so it adds up. Repack the structures to remove the holes. No functional change intended. Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510095710.148178-3-tabba@google.com
2022-05-04KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revisionMarc Zyngier1-0/+3
Since adversising GICR_CTLR.{IC,CES} is directly observable from a guest, we need to make it selectable from userspace. For that, bump the default GICD_IIDR revision and let userspace downgrade it to the previous default. For GICv2, the two distributor revisions are strictly equivalent. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
2022-05-04KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidationMarc Zyngier1-0/+1
Since GICv4.1, it has become legal for an implementation to advertise GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more efficient invalidation scheme (no guest command queue contention when multiple CPUs are generating invalidations). Provide the invalidation registers as a primitive to their ITS counterpart. Note that we don't advertise them to the guest yet (the architecture allows an implementation to do this). Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Oliver Upton <oupton@google.com> Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
2022-05-04KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIsMarc Zyngier1-2/+2
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order to be sure that the write has taken effect. We so far reported it as 0, as we didn't advertise that LPIs could be turned off the first place. Start tracking this state during which LPIs are being disabled, and expose the 'in progress' state via the RWP bit. We also take this opportunity to disallow enabling LPIs and programming GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by the architecture (UNPRED behaviour). We don't advertise the feature to the guest yet (which is allowed by the architecture). Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
2022-05-03KVM: arm64: Setup a framework for hypercall bitmap firmware registersRaghavendra Rao Ananta1-0/+1
KVM regularly introduces new hypercall services to the guests without any consent from the userspace. This means, the guests can observe hypercall services in and out as they migrate across various host kernel versions. This could be a major problem if the guest discovered a hypercall, started using it, and after getting migrated to an older kernel realizes that it's no longer available. Depending on how the guest handles the change, there's a potential chance that the guest would just panic. As a result, there's a need for the userspace to elect the services that it wishes the guest to discover. It can elect these services based on the kernels spread across its (migration) fleet. To remedy this, extend the existing firmware pseudo-registers, such as KVM_REG_ARM_PSCI_VERSION, but by creating a new COPROC register space for all the hypercall services available. These firmware registers are categorized based on the service call owners, but unlike the existing firmware pseudo-registers, they hold the features supported in the form of a bitmap. During the VM initialization, the registers are set to upper-limit of the features supported by the corresponding registers. It's expected that the VMMs discover the features provided by each register via GET_ONE_REG, and write back the desired values using SET_ONE_REG. KVM allows this modification only until the VM has started. Some of the standard features are not mapped to any bits of the registers. But since they can recreate the original problem of making it available without userspace's consent, they need to be explicitly added to the case-list in kvm_hvc_call_default_allowed(). Any function-id that's not enabled via the bitmap, or not listed in kvm_hvc_call_default_allowed, will be returned as SMCCC_RET_NOT_SUPPORTED to the guest. Older userspace code can simply ignore the feature and the hypercall services will be exposed unconditionally to the guests, thus ensuring backward compatibility. In this patch, the framework adds the register only for ARM's standard secure services (owner value 4). Currently, this includes support only for ARM True Random Number Generator (TRNG) service, with bit-0 of the register representing mandatory features of v1.0. Other services are momentarily added in the upcoming patches. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: reduced the scope of some helpers, tidy-up bitmap max values, dropped error-only fast path] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-3-rananta@google.com
2022-05-03KVM: arm64: Factor out firmware register handling from psci.cRaghavendra Rao Ananta2-7/+7
Common hypercall firmware register handing is currently employed by psci.c. Since the upcoming patches add more of these registers, it's better to move the generic handling to hypercall.c for a cleaner presentation. While we are at it, collect all the firmware registers under fw_reg_ids[] to help implement kvm_arm_get_fw_num_regs() and kvm_arm_copy_fw_reg_indices() in a generic way. Also, define KVM_REG_FEATURE_LEVEL_MASK using a GENMASK instead. No functional change intended. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: fixed KVM_REG_FEATURE_LEVEL_MASK] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-2-rananta@google.com
2022-04-20KVM: arm64: Simplify kvm_cpu_has_pending_timer()Marc Zyngier1-2/+0
kvm_cpu_has_pending_timer() ends up checking all the possible timers for a wake-up cause. However, we already check for pending interrupts whenever we try to wake-up a vcpu, including the timer interrupts. Obviously, doing the same work twice is once too many. Reduce this helper to almost nothing, but keep it around, as we are going to make use of it soon. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419182755.601427-4-maz@kernel.org
2022-02-25Merge branch kvm-arm64/psci-1.1 into kvmarm-master/nextMarc Zyngier1-1/+2
* kvm-arm64/psci-1.1: : . : Limited PSCI-1.1 support from Will Deacon: : : This small series exposes the PSCI SYSTEM_RESET2 call to guests, which : allows the propagation of a "reset_type" and a "cookie" back to the VMM. : Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"), : the vendor-defined range can be used by a bootloader to provide additional : information about the reset, such as an error code. : . KVM: arm64: Remove unneeded semicolons KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest KVM: arm64: Bump guest PSCI version to 1.1 Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-21KVM: arm64: Bump guest PSCI version to 1.1Will Deacon1-1/+2
Expose PSCI version v1.1 to the guest by default. The only difference for now is that an updated version number is reported by PSCI_VERSION. Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220221153524.15397-2-will@kernel.org
2022-02-08Merge branch kvm-arm64/pmu-bl into kvmarm-master/nextMarc Zyngier1-0/+5
* kvm-arm64/pmu-bl: : . : Improve PMU support on heterogeneous systems, courtesy of Alexandru Elisei : . KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU KVM: arm64: Add KVM_ARM_VCPU_PMU_V3_SET_PMU attribute KVM: arm64: Keep a list of probed PMUs KVM: arm64: Keep a per-VM pointer to the default PMU perf: Fix wrong name in comment for struct perf_cpu_context KVM: arm64: Do not change the PMU event filter after a VCPU has run Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-02-08KVM: arm64: Keep a list of probed PMUsAlexandru Elisei1-0/+5
The ARM PMU driver calls kvm_host_pmu_init() after probing to tell KVM that a hardware PMU is available for guest emulation. Heterogeneous systems can have more than one PMU present, and the callback gets called multiple times, once for each of them. Keep track of all the PMUs available to KVM, as they're going to be needed later. Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127161759.53553-5-alexandru.elisei@arm.com
2022-02-08KVM: arm64: Drop unused param from kvm_psci_version()Oliver Upton1-5/+1
kvm_psci_version() consumes a pointer to struct kvm in addition to a vcpu pointer. Drop the kvm pointer as it is unused. While the comment suggests the explicit kvm pointer was useful for calling from hyp, there exist no such callsite in hyp. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220208012705.640444-1-oupton@google.com
2022-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+3
Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-04KVM: arm64: vgic: Replace kernel.h with the necessary inclusionsAndy Shevchenko1-1/+3
arm_vgic.h does not require all the stuff that kernel.h provides. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220104151940.55399-1-andriy.shevchenko@linux.intel.com
2021-11-17KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=ySean Christopherson1-7/+12
Move the definition of kvm_arm_pmu_available to pmu-emul.c and, out of "necessity", hide it behind CONFIG_HW_PERF_EVENTS. Provide a stub for the key's wrapper, kvm_arm_support_pmu_v3(). Moving the key's definition out of perf.c will allow a future commit to delete perf.c entirely. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211111020738.2512932-16-seanjc@google.com
2021-09-20KVM: arm64: Fix PMU probe orderingMarc Zyngier1-3/+0
Russell reported that since 5.13, KVM's probing of the PMU has started to fail on his HW. As it turns out, there is an implicit ordering dependency between the architectural PMU probing code and and KVM's own probing. If, due to probe ordering reasons, KVM probes before the PMU driver, it will fail to detect the PMU and prevent it from being advertised to guests as well as the VMM. Obviously, this is one probing too many, and we should be able to deal with any ordering. Add a callback from the PMU code into KVM to advertise the registration of a host CPU PMU, allowing for any probing order. Fixes: 5421db1be3b1 ("KVM: arm64: Divorce the perf code from oprofile helpers") Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk Cc: stable@vger.kernel.org
2021-06-01KVM: arm64: vgic: Implement SW-driven deactivationMarc Zyngier1-0/+10
In order to deal with these systems that do not offer HW-based deactivation of interrupts, let implement a SW-based approach: - When the irq is queued into a LR, treat it as a pure virtual interrupt and set the EOI flag in the LR. - When the interrupt state is read back from the LR, force a deactivation when the state is invalid (neither active nor pending) Interrupts requiring such treatment get the VGIC_SW_RESAMPLE flag. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-01KVM: arm64: vgic: move irq->get_input_level into an ops structureMarc Zyngier1-11/+17
We already have the option to attach a callback to an interrupt to retrieve its pending state. As we are planning to expand this facility, move this callback into its own data structure. This will limit the size of individual interrupts as the ops structures can be shared across multiple interrupts. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-01KVM: arm64: vgic: Let an interrupt controller advertise lack of HW deactivationMarc Zyngier1-0/+3
The vGIC, as architected by ARM, allows a virtual interrupt to trigger the deactivation of a physical interrupt. This allows the following interrupt to be delivered without requiring an exit. However, some implementations have choosen not to implement this, meaning that we will need some unsavoury workarounds to deal with this. On detecting such a case, taint the kernel and spit a nastygram. We'll deal with this in later patches. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-22Merge branch 'kvm-arm64/kill_oprofile_dependency' into kvmarm-master/nextMarc Zyngier1-0/+4
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-22KVM: arm64: Divorce the perf code from oprofile helpersMarc Zyngier1-0/+4
KVM/arm64 is the sole user of perf_num_counters(), and really could do without it. Stop using the obsolete API by relying on the existing probing code. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210414134409.1266357-2-maz@kernel.org
2021-04-06KVM: arm64: vgic-v3: Expose GICR_TYPER.Last for userspaceEric Auger1-0/+1
Commit 23bde34771f1 ("KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace") temporarily fixed a bug identified when attempting to access the GICR_TYPER register before the redistributor region setting, but dropped the support of the LAST bit. Emulating the GICR_TYPER.Last bit still makes sense for architecture compliance though. This patch restores its support (if the redistributor region was set) while keeping the code safe. We introduce a new helper, vgic_mmio_vcpu_rdist_is_last() which computes whether a redistributor is the highest one of a series of redistributor contributor pages. With this new implementation we do not need to have a uaccess read accessor anymore. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210405163941.510258-9-eric.auger@redhat.com
2021-03-06KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static keyMarc Zyngier1-2/+7
We currently find out about the presence of a HW PMU (or the handling of that PMU by perf, which amounts to the same thing) in a fairly roundabout way, by checking the number of counters available to perf. That's good enough for now, but we will soon need to find about about that on paths where perf is out of reach (in the world switch). Instead, let's turn kvm_arm_support_pmu_v3() into a static key. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org Message-Id: <20210305185254.3730990-5-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-04KVM: arm64: Replace KVM_ARM_PMU with HW_PERF_EVENTSMarc Zyngier1-1/+1
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts, and makes no sense now that we are 64bit only. Get rid of it. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-04Merge remote-tracking branch 'origin/kvm-arm64/misc-5.11' into ↵Marc Zyngier1-0/+1
kvmarm-master/queue Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-11-30KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bitShenming Lu1-0/+1
In order to reduce the impact of the VPT parsing happening on the GIC, we can split the vcpu reseidency in two phases: - programming GICR_VPENDBASER: this still happens in vcpu_load() - checking for the VPT parsing to be complete: this can happen on vcpu entry (in kvm_vgic_flush_hwstate()) This allows the GIC and the CPU to work in parallel, rewmoving some of the entry overhead. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Shenming Lu <lushenming@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201128141857.983-3-lushenming@huawei.com
2020-11-27KVM: arm64: Get rid of the PMU ready stateMarc Zyngier1-3/+0
The PMU ready state has no user left. Goodbye. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
2020-09-29KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1Marc Zyngier1-0/+5
As we can now hide events from the guest, let's also adjust its view of PCMEID{0,1}_EL1 so that it can figure out why some common events are not counting as they should. The astute user can still look into the TRM for their CPU and find out they've been cheated, though. Nobody's perfect. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-28KVM: arm64: pmu: Make overflow handler NMI safeJulien Thierry1-0/+1
kvm_vcpu_kick() is not NMI safe. When the overflow handler is called from NMI context, defer waking the vcpu to an irq_work queue. A vcpu can be freed while it's not running by kvm_destroy_vm(). Prevent running the irq_work for a non-existent vcpu by calling irq_work_sync() on the PMU destroy path. [Alexandru E.: Added irq_work_sync()] Signed-off-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox) Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Pouloze <suzuki.poulose@arm.com> Cc: kvm@vger.kernel.org Cc: kvmarm@lists.cs.columbia.edu Link: https://lore.kernel.org/r/20200924110706.254996-6-alexandru.elisei@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-07KVM: arm64: timers: Move timer registers to the sys_regs fileMarc Zyngier1-7/+4
Move the timer gsisters to the sysreg file. This will further help when they are directly changed by a nesting hypervisor in the VNCR page. This requires moving the initialisation of the timer struct so that some of the helpers (such as arch_timer_ctx_index) can work correctly at an early stage. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-07-07KVM: arm64: timers: Rename kvm_timer_sync_hwstate to kvm_timer_sync_userMarc Zyngier1-1/+1
kvm_timer_sync_hwstate() has nothing to do with the timer HW state, but more to do with the state of a userspace interrupt controller. Change the suffix from _hwstate to_user, in keeping with the rest of the code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-05-28KVM: arm64: vgic-v3: Take cpu_if pointer directly instead of vcpuChristoffer Dall1-1/+4
If we move the used_lrs field to the version-specific cpu interface structure, the following functions only operate on the struct vgic_v3_cpu_if and not the full vcpu: __vgic_v3_save_state __vgic_v3_restore_state __vgic_v3_activate_traps __vgic_v3_deactivate_traps __vgic_v3_save_aprs __vgic_v3_restore_aprs This is going to be very useful for nested virt, so move the used_lrs field and change the prototypes and implementations of these functions to take the cpu_if parameter directly. No functional change. Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-03-24KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interruptsMarc Zyngier1-0/+3
In order to let a guest buy in the new, active-less SGIs, we need to be able to switch between the two modes. Handle this by stopping all guest activity, transfer the state from one mode to the other, and resume the guest. Nothing calls this code so far, but a later patch will plug it into the MMIO emulation. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
2020-03-24irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layerMarc Zyngier1-0/+1
In order to hide some of the differences between v4.0 and v4.1, move the doorbell management out of the KVM code, and into the GICv4-specific layer. This allows the calling code to ask for the doorbell when blocking, and otherwise to leave the doorbell permanently disabled. This matches the v4.1 code perfectly, and only results in a minor refactoring of the v4.0 code. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
2019-11-08Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/nextMarc Zyngier1-5/+3
2019-10-29KVM: arm/arm64: vgic: Fix some comments typoZenghui Yu1-1/+1
Fix various comments, including wrong function names, grammar mistakes and specification references. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
2019-10-29KVM: arm/arm64: vgic: Remove the declaration of kvm_send_userspace_msi()Zenghui Yu1-2/+0
The callsite of kvm_send_userspace_msi() is currently arch agnostic. There seems no reason to keep an extra declaration of it in arm_vgic.h (we already have one in include/linux/kvm_host.h). Remove it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20191029071919.177-2-yuzenghui@huawei.com
2019-10-28KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/putMarc Zyngier1-2/+2
When the VHE code was reworked, a lot of the vgic stuff was moved around, but the GICv4 residency code did stay untouched, meaning that we come in and out of residency on each flush/sync, which is obviously suboptimal. To address this, let's move things around a bit: - Residency entry (flush) moves to vcpu_load - Residency exit (sync) moves to vcpu_put - On blocking (entry to WFI), we "put" - On unblocking (exit from WFI), we "load" Because these can nest (load/block/put/load/unblock/put, for example), we now have per-VPE tracking of the residency state. Additionally, vgic_v4_put gains a "need doorbell" parameter, which only gets set to true when blocking because of a WFI. This allows a finer control of the doorbell, which now also gets disabled as soon as it gets signaled. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
2019-10-21KVM: arm/arm64: Factor out hypercall handling from PSCI codeChristoffer Dall2-1/+44
We currently intertwine the KVM PSCI implementation with the general dispatch of hypercall handling, which makes perfect sense because PSCI is the only category of hypercalls we support. However, as we are about to support additional hypercalls, factor out this functionality into a separate hypercall handler file. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [steven.price@arm.com: rebased] Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Use a single IO device per redistributorEric Auger1-1/+0
At the moment we use 2 IO devices per GICv3 redistributor: one one for the RD_base frame and one for the SGI_base frame. Instead we can use a single IO device per redistributor (the 2 frames are contiguous). This saves slots on the KVM_MMIO_BUS which is currently limited to NR_IOBUS_DEVS (1000). This change allows to instantiate up to 512 redistributors and may speed the guest boot with a large number of VCPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic: Add LPI translation cache definitionMarc Zyngier1-0/+3
Add the basic data structure that expresses an MSI to LPI translation as well as the allocation/release hooks. The size of the cache is arbitrarily defined as 16*nr_vcpus. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-05KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to blockMarc Zyngier1-0/+1
Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-23KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter indexZenghui Yu1-0/+2
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray <andrew.murray@arm.com> Suggested-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Support chained PMU countersAndrew Murray1-0/+2
ARMv8 provides support for chained PMU counters, where an event type of 0x001E is set for odd-numbered counters, the event counter will increment by one for each overflow of the preceding even-numbered counter. Let's emulate this in KVM by creating a 64 bit perf counter when a user chains two emulated counters together. For chained events we only support generating an overflow interrupt on the high counter. We use the attributes of the low counter to determine the attributes of the perf event. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>