summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+14
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-11dt-bindings: Document img,boston-clock bindingPaul Burton1-0/+14
Add device tree binding documentation for the clocks provided by the MIPS Boston development board from Imagination Technologies, and a header file describing the available clocks for use by device trees & driver. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-07-07Merge tag 'clk-for-linus' of ↵Linus Torvalds22-5/+1165
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we've got one core change to introduce a bulk clk_get API, some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits) clk: gemini: Read status before using the value clk: scpi: error when clock fails to register clk: at91: Add sama5d2 suspend/resume gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K clk: keystone: TI_SCI_PROTOCOL is needed for clk driver clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL clk: uniphier: provide NAND controller clock rate clk: hisilicon: add usb2 clocks for hi3798cv200 SoC clk: Add Gemini SoC clock controller clk: iproc: Remove __init marking on iproc_pll_clk_setup() clk: bcm: Add clocks for Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC clk: mediatek: export cpu multiplexer clock for MT8173 SoCs clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work clk: renesas: cpg-mssr: Use of_device_get_match_data() helper clk: hi6220: add acpu clock clk: zx296718: export I2S mux clocks clk: imx7d: create clocks behind rawnand clock gate clk: hi3660: Set PPLL2 to 2880M ...
2017-07-04Merge tag 'armsoc-dt64' of ↵Linus Torvalds2-0/+169
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+174
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-07-04Merge tag 'armsoc-dt' of ↵Linus Torvalds7-1/+138
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. New machines: - The new Action Semi S500 platform is added along with initial support for the LeMaker Guitar board. - STM32 gains support for three new boards: stm32h743-disco, stm32f746-disco, and stm32f769-disco, along with new device support for the existing stm32f429 boards. - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus board. - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM wireless router. - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and the Technexion Pico i.MX7D single-board computers. - The BeagleBone Blue is added for OMAP, it's the latest variation of the popular Beaglebone Black single-board computer. - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are added, these are the latest variations of a seemingly endless supply of similar single-board computers. Other updates: - Linus Walleij improves support for the "Faraday" based SoC platforms from various SoC makers (Moxart, Aspeed, Gemini) - The ARM Mali GPU is now describe on Rockchips SoCs - Mediatek MT7623 is extended significantly, making it much more useful. - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom, Allwinner, Qualcomm, iMX - For Amlogic, the clock support is extended a lot on meson8b. - We now build the devicetree file for the Raspberry Pi 3 on 32-bit ARM, in addition to the existing ARM64 support, to help users wanting to run a 32-bit system on it" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits) ARM: dts: socfpga: set the i2c frequency ARM: dts: socfpga: Add second ethernet alias to VINING FPGA ARM: dts: socfpga: Drop LED node from VINING FPGA ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA ARM: dts: socfpga: Enable QSPI support on VINING FPGA ARM: dts: socfpga: Fix the ethernet clock phandle ARM: pxa: Use - instead of @ for DT OPP entries ARM: dts: owl-s500: Add SPS node ARM: dts: owl-s500: Set CPU enable-method dt-bindings: arm: cpus: Add S500 enable-method ARM: dts: Add Actions Semi S500 and LeMaker Guitar dt-bindings: arm: Document Actions Semi S900 dt-bindings: timer: Document Owl timer ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes dt-bindings: arm: Document Actions Semi S500 dt-bindings: Add vendor prefix for Actions Semi ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) ARM: dts: armada-385-linksys: fixup button node names ARM: dts: armada-385-linksys: group pins in pinctrl ...
2017-07-04Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: - Andres Färber adds initial support for the Actions Semi S500 (aka 'owl') platform, a close relative of the S900 platform he adds for arm64. - in mach-omap2, we remove more legacy code - Rockchips gains support for the RV1108 SoC designed for camera applications. - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70) - Minor updates for other platforms, including davinci, s3c64xx, prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: owl: smp: Drop bogus holding pen ARM: owl: Drop custom machine ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3 soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains MAINTAINERS: Update Actions Semi section with SPS ARM: owl: Implement CPU enable-method for S500 MAINTAINERS: Add Actions Semi Owl section ARM: Prepare Actions Semi S500 ARM: socfpga: Increase max number of GPIOs ARM: stm32: Introduce MACH_STM32F469 flag ARM: prima2: remove redundant select CPU_V7 ARM: davinci: fix const warnings ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON ARM: OMAP4: hwmod_data: add SHAM crypto accelerator ARM: OMAP4: hwmod data: add des ARM: OMAP4: hwmod data: add aes2 ARM: OMAP4: hwmod data: add aes1 ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe() ...
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
2017-07-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq department delivers: - Expand the generic infrastructure handling the irq migration on CPU hotplug and convert X86 over to it. (Thomas Gleixner) Aside of consolidating code this is a preparatory change for: - Finalizing the affinity management for multi-queue devices. The main change here is to shut down interrupts which are affine to a outgoing CPU and reenabling them when the CPU comes online again. That avoids moving interrupts pointlessly around and breaking and reestablishing affinities for no value. (Christoph Hellwig) Note: This contains also the BLOCK-MQ and NVME changes which depend on the rework of the irq core infrastructure. Jens acked them and agreed that they should go with the irq changes. - Consolidation of irq domain code (Marc Zyngier) - State tracking consolidation in the core code (Jeffy Chen) - Add debug infrastructure for hierarchical irq domains (Thomas Gleixner) - Infrastructure enhancement for managing generic interrupt chips via devmem (Bartosz Golaszewski) - Constification work all over the place (Tobias Klauser) - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni) - The usual set of fixes, updates and enhancements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) irqchip/or1k-pic: Fix interrupt acknowledgement irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity nvme: Allocate queues for all possible CPUs blk-mq: Create hctx for each present CPU blk-mq: Include all present CPUs in the default queue mapping genirq: Avoid unnecessary low level irq function calls genirq: Set irq masked state when initializing irq_desc genirq/timings: Add infrastructure for estimating the next interrupt arrival time genirq/timings: Add infrastructure to track the interrupt timings genirq/debugfs: Remove pointless NULL pointer check irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID irqchip/gic-v3-its: Add ACPI NUMA node mapping irqchip/gic-v3-its-platform-msi: Make of_device_ids const irqchip/gic-v3-its: Make of_device_ids const irqchip/irq-mvebu-icu: Add new driver for Marvell ICU irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU genirq/irqdomain: Remove auto-recursive hierarchy support irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access ...
2017-06-29Merge tag 'actions-drivers-for-4.13' of ↵Arnd Bergmann1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers Pull "Actions Semi SoC drivers for 4.13" from Andreas Färber: This adds clock source and power domain drivers for S500/S900. * tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains clocksource: owl: Add S900 support clocksource: Add Owl timer
2017-06-29Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Pull "Amlogic 64-bit DT changes for v4.13 (round 2)" from Kevin Hilman: - support new SPI controller driver - several more leaf clocks exposed to DT - New board: S905x LibreTech CC board * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix ARM64: dts: meson-gx: Add SPICC nodes clk: meson-gxbb: un-export the CPU clock clk: meson-gxbb: expose UART clocks clk: meson-gxbb: expose SPICC gate clk: meson-gxbb: expose spdif master clock clk: meson-gxbb: expose i2s master clock clk: meson-gxbb: expose spdif clock gates
2017-06-29Merge tag 'amlogic-dt-2' of ↵Arnd Bergmann2-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Merge "Amlogic 32-bit DT changes for v4.13 (round 2)" from Kevin Hilman: - greatly expands DT clock support for meson8b * tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (22 commits) ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b ARM: dts: meson8b: add the SCU device node ARM: dts: meson: add USB support on Meson8 and Meson8b ARM: dts: meson: add the hardware random number generator ARM: dts: meson8: add reserved memory zones ARM: dts: meson: add the SAR ADC ARM: dts: meson8: add the pins for the SDIO controller ARM: dts: meson8: add the PWM_E and PWM_F pins ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros ARM: dts: meson: use C preprocessor friendly include syntax ARM: dts: meson8: fix the IR receiver pins clk: meson8b: export the ethernet gate clock clk: meson8b: export the USB clocks clk: meson8b: export the gate clock for the HW random number generator clk: meson8b: export the SDIO clock clk: meson8b: export the SAR ADC clocks clk: meson-gxbb: un-export the CPU clock clk: meson-gxbb: expose UART clocks clk: meson-gxbb: expose SPICC gate clk: meson-gxbb: expose spdif master clock ...
2017-06-23dt-bindings: power: Add Owl SPS power domainsAndreas Färber1-0/+19
Define power domains for all non-reserved S500 power gates. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-23irqchip/irq-mvebu-icu: Add new driver for Marvell ICUThomas Petazzoni1-0/+15
The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa <hannah@marvell.com>. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-21clk: hisilicon: add usb2 clocks for hi3798cv200 SoCJiancheng Xue1-1/+8
Add usb2 clocks for hi3798cv200 SoC. Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19dt-bindings: clk: Extend binding doc for Stingray SOCSandeep Tripathy1-0/+101
Update iproc clock dt-binding documentation with Stingray pll and clock details. Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: mediatek: export cpu multiplexer clock for MT8173 SoCsSean Wang1-1/+3
The patch enables CPU multiplexer clock on MT8173 SoC which fixes up cpufreq driver fails at acquiring intermediate clock source when driver probe is called. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCsSean Wang1-1/+2
The patch enables CPU multiplexer clock on MT2701/MT7623 SoC which fixes up cpufreq driver fails at acquiring intermediate clock source when driver probe is called. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: hi6220: add acpu clockZhangfei Gao1-0/+4
Add acpu clock, including sft clock controlling hi6220 coresight module Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: zx296718: export I2S mux clocksShawn Guo1-1/+5
Export I2S mux clocks, so that device tree can refer to them for setting a better parent clock for I2S work clock. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: imx7d: create clocks behind rawnand clock gateStefan Agner1-1/+3
The rawnand clock gate gates two clocks, NAND_USDHC_BUS_CLK_ROOT and NAND_CLK_ROOT. However, the gate has been in the chain of the latter only. This does not allow to use the NAND_USDHC_BUS_CLK_ROOT only, e.g. as required by APBH-Bridge-DMA. Add new clocks which represent the clock after the gate, and use a shared clock gate to correctly model the hardware. Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: hi3660: add clocks for video encoder, decoder and ISPChen Jun1-0/+17
This patch adds more clocks for hi3660, including: - video encoder and decoder - ISP (Image Signal Processing) Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: qcom: Add DT bindings for ipq8074 gcc clock controllerAbhishek Sahu1-0/+152
Add the compatible strings and the include file for ipq8074 gcc clock controller. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: add DT bindings header for Gemini clock controllerLinus Walleij1-0/+29
This adds the DT binding macros used by the clock controller. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19reset: add DT bindings header for Gemini reset controllerLinus Walleij1-0/+36
This adds the DT binding macros used by the reset controller. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-18Merge tag 'renesas-dt-bindings2-for-v4.13' of ↵Olof Johansson1-0/+51
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Bindings Updates for v4.13 * Document: - Add Renesas H3-based Salvator-XS board DT bindings - Add iW-RainboW-G20D-Qseven-RZG1M board - Add iW-RainboW-G20M-Qseven-RZG1M system on module - Update R-Car Gen3 ULCB board part numbers * Add clock bit definitions for r7s72100 SoC * tag 'renesas-dt-bindings2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Document Renesas H3-based Salvator-XS board DT bindings ARM: shmobile: Update R-Car Gen3 ULCB board part numbers ARM: shmobile: document iW-RainboW-G20D-Qseven-RZG1M board ARM: shmobile: document iW-RainboW-G20M-Qseven-RZG1M system on module ARM: dts: r7s72100: add clock bit definitions Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'v4.12-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson1-0/+30
next/drivers - enhance scpsys to support mt6797 - add mt6797 support to scpsys - fix error path in pmic-wrapper - fix possible NULL pointer dereference in pmic-wrapper * tag 'v4.12-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: PMIC wrap: Fix possible NULL derefrence. soc: mediatek: PMIC wrap: Fix error handling soc: mediatek: add MT6797 scpsys support soc: mediatek: add vdec item for scpsys soc: mediatek: avoid using fixed spm power status defines Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'v4.13-rockchip-dts32-1' of ↵Olof Johansson2-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt A bunch of changes including mali gpu nodes for rk3288 boards following (and including) the new Mali Midgard binding; a lot of improvements for the rk3228/rk3229 socs (tsadc, operating points, usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108 rename and adc buttons for the rk3288 firefly boards. * tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable usb for rk3229 evb board ARM: dts: rockchip: add usb nodes on rk322x ARM: dts: rockchip: add adc button for Firefly ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som ARM: dts: rockchip: add ARM Mali GPU node for rk3288 dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU ARM: dts: rockchip: set a sane frequence for tsadc on rk322x ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x ARM: dts: rockchip: set default rates for core clocks on rk322x ARM: dts: rockchip: add second uart2 pinctrl on rk322x ARM: dts: rockchip: correct rk322x uart2 pinctrl ARM: dts: rockchip: add watchdog device node on rk322x clk: rockchip: add clock-ids for more rk3228 clocks clk: rockchip: add ids for camera on rk3399 ARM: dts: rockchip: fix rk322x i2s1 pinctrl error ARM: dts: rockchip: rename RK1108-evb to RV1108-evb ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108 ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-16Merge tag 'meson-clk-for-4.13-2' of git://github.com/BayLibre/clk-meson into ↵Stephen Boyd1-0/+10
clk-next Pull Amlogic clk driver updates from Jerome Brunet: * Expose more clock gate on meson8 (SAR ADC, RNG, USB, SDIO, ETH) * Add new compatible to the meson8 clock controller for meson8b * Add missing parents to gxbb clk81 * tag 'meson-clk-for-4.13-2' of git://github.com/BayLibre/clk-meson: clk: meson: gxbb: add all clk81 parents clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 clk: meson8b: export the ethernet gate clock clk: meson8b: export the USB clocks clk: meson8b: export the gate clock for the HW random number generator clk: meson8b: export the SDIO clock clk: meson8b: export the SAR ADC clocks
2017-06-16Merge branch 'for-4.13-ti-clkctrl' of https://github.com/t-kristo/linux-pm ↵Stephen Boyd1-0/+146
into clk-next * 'for-4.13-ti-clkctrl' of https://github.com/t-kristo/linux-pm: clk: ti: omap4: add clkctrl clock data dt-bindings: clk: add omap4 clkctrl definitions clk: ti: add support for clkctrl clocks Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
2017-06-16Merge tag 'sunxi-clk-for-4.13' of ↵Stephen Boyd5-0/+273
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull Allwinner clock patches from Maxime Ripard: Some new clock units are supported, for the display clocks unsed in the newer SoCs, and the A83T PRCM. There is also a bunch of minor fixes for clocks that are not used by anyone, and reworks needed by drivers that will land in 4.13. * tag 'sunxi-clk-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) clk: sunxi-ng: Move all clock types to a library clk: sunxi-ng: a83t: Add support for A83T's PRCM dt-bindings: clock: sunxi-ccu: Add compatible string for A83T PRCM clk: sunxi-ng: select SUNXI_CCU_MULT for sun8i-a83t clk: sunxi-ng: a83t: Fix audio PLL divider offset clk: sunxi-ng: a83t: Fix PLL lock status register offset clk: sunxi-ng: Add driver for A83T CCU clk: sunxi-ng: Support multiple variable pre-dividers dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU clk: sunxi-ng: de2: fix wrong pointer passed to PTR_ERR() clk: sunxi-ng: sun5i: Export video PLLs clk: sunxi-ng: mux: Re-adjust parent rate clk: sunxi-ng: mux: Change pre-divider application function prototype clk: sunxi-ng: mux: split out the pre-divider computation code clk: sunxi-ng: mux: Don't just rely on the parent for CLK_SET_RATE_PARENT clk: sunxi-ng: div: Switch to divider_round_rate clk: sunxi-ng: Pass the parent and a pointer to the clocks round rate clk: divider: Make divider_round_rate take the parent clock clk: sunxi-ng: explicitly include linux/spinlock.h clk: sunxi-ng: add support for DE2 CCU ...
2017-06-15dt-bindings: clk: add omap4 clkctrl definitionsTero Kristo1-0/+146
Contains offsets for all omap4 clkctrl main and optional clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-06-14Merge branch 'clk-fixes' into clk-nextStephen Boyd2-0/+4
* clk-fixes: clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM clk: sunxi-ng: v3s: Fix usb otg device reset bit clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
2017-06-14Merge tag 'clk-v4.13-samsung' of ↵Stephen Boyd1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next Pull samsung clk driver updates from Sylwester Nawrocki - conversion to the clk_hw API - definitions and fixes of exynos5420 SoC audio subsystem related clocks * tag 'clk-v4.13-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: exynos542x: Add EPLL rate table clk: samsung: Add missing exynos5420 audio related clocks clk: samsung: Add enable/disable operation for PLL36XX clocks clk: samsung: s5pv210-audss: Convert to the new clk_hw API clk: samsung: exynos-clkout: Convert to the new clk_hw API clk: samsung: exynos-audss: Convert to the new clk_hw API clk: samsung: Convert common drivers to the new clk_hw API clk: samsung: Add local variable to match its purpose clk: samsung: Remove dead code
2017-06-14Merge tag 'v4.13-rockchip-clk1' of ↵Stephen Boyd3-0/+331
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull rockchip clk driver updates from Heiko Stuebner: One new clock controller for the rk3128 soc, a fixup for the rk3228 cpuclk table and the usual bunch of some new clock-ids and some clocks marked as critical. * tag 'v4.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: mark some special clk as critical on rk3368 clk: rockchip: mark noc and some special clk as critical on rk3288 clk: rockchip: mark noc and some special clk as critical on rk3228 clk: rockchip: mark pclk_ddrupctl as critical_clock on rk3036 clk: rockchip: add clock controller for rk3128 dt-bindings: add bindings for rk3128 clock controller clk: rockchip: export more rk3228 clocks ids clk: rockchip: add ids for rk3399 testclks used for camera handling clk: rockchip: add dt-binding header for rk3128 clk: rockchip: fix up the RK3228 clk cpu setting table clk: rockchip: add clock-ids for more rk3228 clocks clk: rockchip: add ids for camera on rk3399
2017-06-12clk: meson8b: export the ethernet gate clockMartin Blumenstingl1-0/+1
Export the ethernet gate clock to the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the USB clocksMartin Blumenstingl1-0/+5
Export the USB related clocks (for the USB controller and the USB2 PHYs) so they can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the gate clock for the HW random number generatorMartin Blumenstingl1-0/+1
This exports the clock so it can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the SDIO clockMartin Blumenstingl1-0/+1
Export the SDIO clock so it can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-12clk: meson8b: export the SAR ADC clocksMartin Blumenstingl1-0/+2
Export the clocks for the SAR ADC so they can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-09clk: samsung: Add missing exynos5420 audio related clocksSylwester Nawrocki1-0/+3
This patch adds missing definitions of mux clocks required for using EPLL as the audio subsystem root clock on exynos5420/exynos5422 SoCs. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-06-07clk: sunxi-ng: Add driver for A83T CCUChen-Yu Tsai2-0/+238
The A83T clock control unit is a hybrid of some new style clock designs from the A80, and old style layout from the other Allwinner SoCs. Like the A80, the SoC does not have a low speed 32.768 kHz oscillator. Unlike the A80, there is no clock input either. The only low speed clock available is the internal oscillator which runs at around 16 MHz, divided by 512, yielding a low speed clock around 31.250 kHz. Also, the MMC2 module clock supports switching to a "new timing" mode. This mode divides the clock output by half, and disables the CCU based clock delays. The MMC controller must be configure to the same mode, and then use its internal clock delays. This driver does not support runtime switching of the timing modes. Instead, the new timing mode is enforced at probe time. Consumers can check which mode is active by trying to get the current phase delay of the MMC2 phase clocks, which will return -ENOTSUPP if the new timing mode is active. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-07clk: sunxi-ng: sun5i: Export video PLLsMaxime Ripard1-0/+3
The video PLLs are used directly by the HDMI controller. Export them so that we can use them in our DT node. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-06-07dt-bindings: add binding for the Allwinner DE2 CCUIcenowy Zheng2-0/+32
Allwinner "Display Engine 2.0" contains some clock controls in it. In order to add them as clock drivers, we need a device tree binding. Add the binding here. Also add the device tree binding headers. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-05arm64: dts: Add pinctrl DT nodes for Stingray SOCPramod Kumar1-0/+68
This patch adds pinctrl and pinmux related DT nodes for Stingray SOC. For manageability, pinctrl and pinmum DT nodes are added as separate DTSi file and included in main DTSi file. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-05dt-bindings: clk: Extend binding doc for Stingray SOCSandeep Tripathy1-0/+101
Update iproc clock dt-binding documentation with Stingray pll and clock details. Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-05ARM: dts: r7s72100: add clock bit definitionsChris Brandt1-0/+51
Add the remaining bit locations for the module stop clock registers. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-03dt-bindings: document devicetree bindings for mux-controllers and gpio-muxPeter Rosin1-0/+16
Allow specifying that a single multiplexer controller can be used to control several parallel multiplexers, thus enabling sharing of the multiplexer controller by different consumers. Add a binding for a first mux controller in the form of a GPIO based mux controller. Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-02Merge tag 'meson-clk-for-4.13' of git://github.com/BayLibre/clk-meson into ↵Stephen Boyd1-1/+9
clk-next Pull Amlogic clock driver updates from Jerome Brunet: * Expose more i2s and spdif output clocks * Expose EE uart and SPICC gate clocks * Remove cpu_clk from to gxbb * Mark clk81 as critical on gxbb * Add CEC EE clocks * tag 'meson-clk-for-4.13' of git://github.com/BayLibre/clk-meson: clk: meson-gxbb: Add EE 32K Clock for CEC clk: gxbb: remove CLK_IGNORE_UNUSED from clk81 clk: meson: meson8b: mark clk81 as critical clk: meson: gxbb: remove the "cpu_clk" from the GXBB and GXL driver clk: meson-gxbb: un-export the CPU clock clk: meson-gxbb: expose UART clocks clk: meson-gxbb: expose SPICC gate clk: meson-gxbb: expose spdif master clock clk: meson-gxbb: expose i2s master clock clk: meson-gxbb: expose spdif clock gates