summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2017-03-09scripts/spelling.txt: add "overide" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-03Merge tag 'armsoc-late' of ↵Linus Torvalds2-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
2017-03-02Merge branch 'next/late' with mainlineArnd Bergmann3-1/+18
* next/late: (25 commits) arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ARM64: dts: meson-gxbb-vega-s95: Add LED ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-25Merge tag 'clk-for-linus' of ↵Linus Torvalds25-364/+1527
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The usual collection of new drivers, non-critical fixes, and updates to existing clk drivers. The bulk of the work is on Allwinner and Rockchip SoCs, but there's also an Intel Atom driver in here too. New Drivers: - Tegra BPMP firmware - Hisilicon hi3660 SoCs - Rockchip rk3328 SoCs - Intel Atom PMC - STM32F746 - IDT VersaClock 5P49V5923 and 5P49V5933 - Marvell mv98dx3236 SoCs - Allwinner V3s SoCs Removed Drivers: - Samsung Exynos4415 SoCs Updates: - Migrate ABx500 to OF - Qualcomm IPQ4019 CPU clks and general PLL support - Qualcomm MSM8974 RPM - Rockchip non-critical fixes and clk id additions - Samsung Exynos4412 CPUs - Socionext UniPhier NAND and eMMC support - ZTE zx296718 i2s and other audio clks - Renesas CAN and MSIOF clks for R-Car M3-W - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1 - TI CDCE913, CDCE937, and CDCE949 clk generators - Marvell Armada ap806 CPU frequencies - STM32F4* I2S/SAI support - Broadcom BCM2835 DSI support - Allwinner sun5i and A80 conversion to new style clk bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits) clk: renesas: mstp: ensure register writes complete clk: qcom: Do not drop device node twice clk: mvebu: adjust clock handling for the CP110 system controller clk: mvebu: Expand mv98dx3236-core-clock support clk: zte: add i2s clocks for zx296718 clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR() clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i clk: sunxi-ng: Check kzalloc() for errors and cleanup error path clk: tegra: Add BPMP clock driver clk: uniphier: add eMMC clock for LD11 and LD20 SoCs clk: uniphier: add NAND clock for all UniPhier SoCs ARM: dts: sun9i: Switch to new clock bindings clk: sunxi-ng: Add A80 Display Engine CCU clk: sunxi-ng: Add A80 USB CCU clk: sunxi-ng: Add A80 CCU clk: sunxi-ng: Support separately grouped PLL lock status register clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers clk: qcom: SDHCI enablement on Nexus 5X / 6P ...
2017-02-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-0/+42
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
2017-02-23Merge tag 'armsoc-dt64' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ...
2017-02-23Merge tag 'armsoc-dt' of ↵Linus Torvalds3-7/+60
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-23Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+29
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds1-0/+1612
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-02-20Merge tag 'hwmon-for-linus-v4.11' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for stts751 - it87: Added support for IT8622E and IT8792E; improved support for other chips - lm70: Added support for TMP122/124 - use permission-specific DEVICE_ATTR variants where possible - fixed overflows in various drivers - minor improvements in various drivers * tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits) hwmon: (sht15) Add device tree support devicetree: add lm90 thermal_zone sensor support hwmon: (it87) Add support for IT8792E hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628 hwmon: (it87) Ensure that pwm control cache is current before updating values hwmon: (it87) Improve IT8622 support hwmon: (it87) Add support for IT8622E hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V DT: add binding documentation for STTS751 hwmon: new driver for ST stts751 thermal sensor hwmon: Register thermal zone only if 'dev' parameter was provided hwmon: Relax name attribute validation for new APIs hwmon: Update documentation to clarify rules for the 'name' attribute hwmon: Make name attribute mandatory for new APIs hwmon: (lm70) Add support for TI TMP122/124 hwmon: (lm70) Utilize dev_warn instead of pr_warn hwmon: (ltc4151) Export OF device ID table as module aliases hwmon: (adc128d818) Preserve operation mode hwmon: (adc128d818) Support operation modes 1-3 ...
2017-02-16Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late Pull "Amlogic DT updates for v4.11, round 2" from Kevin Hilman: - add SAR ADC driver - add ADC laddered keys to meson-gxbb-p200 board * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ARM64: dts: meson-gxbb-vega-s95: Add LED ARM64: dts: meson-gx: add the serial CTS and RTS pin groups ARM64: dts: meson-gx: add the missing uart_AO_B clk: meson-gxbb: Export HDMI clocks ARM64: dts: meson-gxm: add SCPI configuration for GXM ARM64: dts: meson-gx: move the SCPI and SRAM nodes to meson-gx
2017-02-16Merge tag 'samsung-dt64-4.11-3' of ↵Arnd Bergmann2-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late Pull "Samsung DeviceTree ARM64 update for v4.11, third round" from Krzysztof Kozłowski: 1. Add necessary initial configuration for clocks of display subsystem. Till now it worked mostly thanks to bootloader. 2. Use macro definitions instead of hard-coded values for pinctrl on Exynos7. 3. Enable USB 3.0 (DWC3) on Exynos7. * tag 'samsung-dt64-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits) arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks arm64: dts: exynos: Add clocks to Exynos5433 LPASS module arm64: dts: exynos: set LDO7 regulator as always on arm64: dts: exynos: configure TV path clocks for Ultra HD modes arm64: dts: exynos: Fix drive strength of sd0_xxx pin definitions arm64: dts: exynos: Disable pull down for audio pins in Exynos5433 SoCs arm64: dts: exynos: Add TM2 touchkey node arm64: dts: exynos: Remove unneeded unit names in Exynos5433 nodes arm64: dts: exynos: Enable HDMI/TV path on Exynos5433-TM2 arm64: dts: exynos: Add HDMI node to Exynos5433 arm64: dts: exynos: Add DECON_TV node to Exynos5433 arm64: dts: exynos: Fix addresses in node names on Exynos5433 arm64: dts: exynos: Make TM2 and TM2E independent from each other arm64: dts: exynos: Fix wrong values for ldo23 and ldo25 on TM2/TM2E ...
2017-02-10devicetree: add lm90 thermal_zone sensor supportChristian Lamparter1-0/+12
This patch updates the LM90's devicetree definition to include the #thermal-sensor-cells property as well as the sensor constants in include/dt-bindings/thermal/lm90.h. Cc: Wei Ni <wni@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-08net: phy: Add LED mode driver for Microsemi PHYs.Raju Lakkaraju1-0/+29
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Merge tag 'stm32-dt-for-v4.11-2' of ↵Arnd Bergmann1-7/+17
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt Pull "STM32 DT updates for v4.11, round 2" from Alexandre Torgue: Highlights: ---------- - ADD Timers support on STM32F429 MCU - Enable PWM1 & PWM3 on STM32F469 Disco board - Fix STM32F4_X_CLOCK macro - Use STM32F4_X_CLOCK macro in STM32 device tree - Add I2C1 support for STM32F429 MCU - Enable I2C1 on STM32F429 eval board * tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU
2017-02-06include: dt-bindings: Add STM32H7 pinctrl DT definesAlexandre TORGUE1-0/+1612
Adds common pinctrl device tree defines for STM32H743 and STM32H753 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-03Merge tag 'v4.11-rockchip-clk2' of ↵Stephen Boyd1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull Rockchip clk updates from Heiko Stuebner: "Non-critical fix for the pclk_edp divider on rk3399, one new clock-id and making niu (interconnect) clocks critical on rk3288, as CLK_IGNORE_UNUSED is not enough to keep them running all the time when more users access particular clock subtrees." * tag 'v4.11-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: rk3288: make all niu clocks critical clk: rockchip: use rk3288 vip_out clock ids clk: rockchip: add rk3288 vip_out clock id clk: rockchip: fix the incorrect pclk_edp div width for RK3399
2017-02-03Merge tag 'sunxi-clk-for-4.11' of ↵Stephen Boyd10-0/+837
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock updates from Maxime Ripard: - Support for one new SoC, the V3s - Conversion of two old SoCs to the new framework, the old sun5i family and the A80 - A bunch of fixes * tag 'sunxi-clk-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits) ARM: dts: sun9i: Switch to new clock bindings clk: sunxi-ng: Add A80 Display Engine CCU clk: sunxi-ng: Add A80 USB CCU clk: sunxi-ng: Add A80 CCU clk: sunxi-ng: Support separately grouped PLL lock status register clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for the GPU clk: sunxi-ng: Call divider_round_rate if we only have a single parent ARM: gr8: Convert to CCU ARM: sun5i: Convert to CCU clk: sunxi-ng: Add sun5i CCU driver clk: sunxi-ng: Implement global pre-divider clk: sunxi-ng: Implement multiplier maximum clk: sunxi-ng: mult: Fix minimum in round rate clk: sunxi-ng: Implement factors offsets clk: sunxi-ng: multiplier: Add fractional support clk: sunxi-ng: add support for V3s CCU dt-bindings: add device binding for the CCU of Allwinner V3s ...
2017-02-02Merge tag 'samsung-pinctrl-4.11' into next/dt64Krzysztof Kozlowski1-0/+8
Merge the pinctrl header before its usage. Defines for GPIO drive strengths on Exynos5433 and Exynos7, used in Device Tree sources.
2017-02-02pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitionsPankaj Dubey1-0/+8
Exynos7 SoC pinctrl configurations are similar to existing Exynos4/5 except for FSYS1 pinctrl drive strengths. So adding Exynos7 specific FSYS1 blocks pinctrl driver strength related macros which will be used in Exynos7 DTSi files. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-02-01dt-bindings: mfd: stm32f4: Add missing binding definitionGabriel Fernandez1-2/+12
This patch adds missing binding definition (backupram, ethernet, otg, qspi, adc & dsi) Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macroGabriel Fernandez1-5/+5
Macro to select a clock was not correct. Offset of enable register starts at 0x30, then calculation to select a bit is: (@enable_reg - 0x30) / 4 * 32 + bit_to_select Tested-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-31Merge tag 'clk-v4.11-samsung-dphy' of git://linuxtv.org/snawrocki/samsung ↵Krzysztof Kozlowski1-1/+4
into next/dt64 Exporting clocks for MIPI DSI DPHY and the display PLL frequency list update for Exynos5433 SoC.
2017-01-30clk: sunxi-ng: Add A80 Display Engine CCUChen-Yu Tsai2-0/+138
With the A80 SoC, Allwinner grouped and moved some subsystem specific clock controls to a separate address space, and possibly separate hardware block. One such subsystem is the display engine. The main clock control unit now only has 1 set of bus gate, dram gate, module clock, and reset control for the entire display subsystem. These feed into a secondary clock control unit, which has controls for each individual module of the display pipeline. This block is not documented in the user manual. Allwinner's kernel was used as the reference. Add support for the display engine clock controls found on the A80. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-30clk: sunxi-ng: Add A80 USB CCUChen-Yu Tsai2-0/+115
Add support for the USB clock controls found on the A80. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-30clk: sunxi-ng: Add A80 CCUChen-Yu Tsai2-0/+264
Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-29Merge tag 'zte-pd-4.11' of ↵Olof Johansson1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers ZTE PM domain driver support for 4.11: - It includes a series which adds DT bindings and PM domain driver for PCU (Power Control Unit) block found on ZTE ZX2967 family SoC. * tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: zte: pm_domains: Add support for zx296718 soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family soc: zte: Add header for PM domains specifiers MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture dt-bindings: zte: add bindings document for zx2967 power domain controller Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'renesas-dt2-for-v4.11' of ↵Olof Johansson1-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.11 Enhancements: - Add power-domains to mmcif on r7s72100 SoC - Add OSTM to rskrza1/r7s72100 - Link ARM GIC to clock and clock domain on r8a774[35] SoCs Clean-up: - Correct SATA device status on r8a7779/marzen * tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r7s72100: add power-domains to mmcif ARM: dts: rskrza1: add ostm DT support ARM: dts: r7s72100: add ostm to device tree ARM: dts: r7s72100: add ostm clock to device tree ARM: dts: r8a7745: Link ARM GIC to clock and clock domain ARM: dts: r8a7743: Link ARM GIC to clock and clock domain ARM: dts: r8a7779, marzen: Fix sata device status Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'v4.11-armsoc-drivers1' of ↵Olof Johansson1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Some extensions to the power-domain driver to support domains in hiword registers (write-mask in upper 16bit) and domain-definitions for the rk3328 soc. Secondly a "driver" that attaches to the already existing grf nodes and is able to set static defaults for settings that cannot really be attached to any specific subsystem. Most GRF settings can already be set from drivers using them, but there are some behavioural settings like the mmc/jtag switch that cannot. As the commit message states this is really meant as a last line of defence for things that neither belong to a subsystem nor to the Having this here allows arm64 socs to have this as well and also moves another bit of code out of the arm32 mach-rockchip. * tag 'v4.11-armsoc-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: drop rk3288 jtag/mmc switch handling soc: rockchip: add driver handling grf setup dt-bindings: add used but undocumented rockchip grf compatible values soc: rockchip: power-domain: add power domain support for rk3328 dt-bindings: add binding for rk3328 power domains dt-bindings: power: add RK3328 SoCs header for idle-request soc: rockchip: power-domain: Support domain control in hiword-registers Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-27dt-bindings: qcom: clk: Add missing binding for SDCHI enablement on Nexus 5X/6PJeremy McNicoll1-0/+1
AHB clock branch is needed in order to enable SDHCI on msm899(2/4). Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-27Merge tag 'clk-v4.11-samsung-2' of git://linuxtv.org/snawrocki/samsung into ↵Stephen Boyd1-1/+4
clk-next Pull Samsung clk driver updates from Sylwester Nawrocki: - Exporting clock IDs for Exynos5433 SoC MIPI DSI DPHY - Exynos PLL code updates and overall minor clean-ups * tag 'clk-v4.11-samsung-2' of git://linuxtv.org/snawrocki/samsung: clk: samsung: mark s3c...._clk_sleep_init() as __init clk: samsung: Add enable/disable support for PLL35XX clocks clk: samsung: exynos5433: Correct typos in SoC name clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
2017-01-27clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocksMarek Szyprowski1-1/+4
Add missing identifiers for phyclk_mipidphy0_bitclkdiv8_phy and phyclk_mipidphy0_rxclkesc0_phy clocks. Access to those clocks is needed to setup initial clock configuration for display subsystem in device tree in order to avoid dependency on the configuration left by the bootloader. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-01-26Merge branch 'clk-ux500' into clk-nextStephen Boyd1-0/+11
* clk-ux500: clk: ux500: Convert ABx500 clocks to use OF probing clk: ux500: Add device tree bindings for ABx500 clocks clk: ux500: move AB8500 sysclk over to PRCMU clk driver
2017-01-26clk: ux500: Convert ABx500 clocks to use OF probingLinus Walleij1-0/+11
These clocks have been broken for a long time unfortunately, a hurdle of misc problems made them stop working at some point breaking USB and audio on Ux500. The platform as such and all "regular" clocks are migrated to OF/device tree, so let's migrate also this driver. With this patch and the corresponding DTS fixes, and a bunch of probe deferral fixes, audio starts working again on Ux500. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26Merge branch 'clk-stm32f4' into clk-nextStephen Boyd1-0/+20
* clk-stm32f4: clk: stm32f7: Add stm32f7 clock DT bindings for STM32F746 boards
2017-01-26Merge branch 'clk-imx7', 'clk-bcm2835' into clk-nextStephen Boyd2-1/+4
* clk-imx7: clk: imx7d: Add the OCOTP clock * clk-bcm2835: clk: bcm2835: Add leaf clock measurement support, disabled by default clk: bcm2835: Register the DSI0/DSI1 pixel clocks. clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers.
2017-01-24ARM: dts: r7s72100: add ostm clock to device treeChris Brandt1-0/+4
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-23clk: gxbb: add the SAR ADC clocks and expose themMartin Blumenstingl1-0/+4
The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks: - a mux clock to choose between different ADC reference clocks (this is 2-bit wide, but the datasheet only lists the parents for the first bit) - a divider for the input/reference clock - a gate which enables the ADC clock Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and CLKID_SANA (which seems to enable the analog inputs, but unfortunately there is no documentation for this - we just mimic what the vendor driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23clk: sunxi-ng: Add sun5i CCU driverMaxime Ripard2-0/+135
The Allwinner A10s, A13, R8 and NextThing GR8 are all based on the same silicon, and all share the same clocks. However, they're not packaged in the same way, and therefore not all the controllers are actually available on all these SoCs. Introduce a clock controller driver for all these SoCs with different compatibles to take that into account. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-22clk: rockchip: add rk3288 vip_out clock idJacob Chen1-0/+1
Add clock-ids for the vip block of the rk3288 Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-20clk: stm32f7: Add stm32f7 clock DT bindings for STM32F746 boardsGabriel Fernandez1-0/+20
This patch introduces the stm32f7 clock DT bindings. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: imx7d: Add the OCOTP clockFabio Estevam1-1/+2
Add the OCOTP so that this hardware block can be used. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: bcm2835: Register the DSI0/DSI1 pixel clocks.Eric Anholt1-0/+2
The DSI pixel clocks are muxed from clocks generated in the analog phy by the DSI driver. In order to set them as parents, we need to do the same name lookup dance on them as we do for our root oscillator. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20Merge tag 'v4.11-rockchip-clk1' of ↵Stephen Boyd3-0/+403
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull Rockchip clk updates from Heiko Stuebner: A new clock-type for the 1-2 muxes per soc that are for whatever reason controlled through the General Register Files, support for the rk3328 clock-controller (including a new pll-type) and the usual clock ids and some fixes. * tag 'v4.11-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: clk: add rockchip,grf property for RK3399 clk: rockchip: use clock ids for memory controller parts on rk3066/rk3188 clk: rockchip: use rk3288 isp_in clock ids clk: rockchip: add clock ids for memory controller parts on rk3066/rk3188 clk: rockchip: add rk3288 isp_in clock ids clk: rockchip: Remove useless init of "grf" to -EPROBE_DEFER clk: rockchip: add clock controller for rk3328 dt-bindings: add bindings for rk3328 clock controller clk: rockchip: add dt-binding header for rk3328 clk: rockchip: add new pll-type for rk3328 clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288 clk: rockchip: add a clock-type for muxes based in the grf
2017-01-20Merge tag 'clk-v4.11-samsung' of git://linuxtv.org/snawrocki/samsung into ↵Stephen Boyd1-360/+0
clk-next Pull Samsung clk updates from Sylwester Nawrocki: - addition of the CPU clock configuration data for Exynos4412 Prime SoC variant, - removal of driver for deprecated Exynos4415 SoC, - switching from the syscore to regular system sleep PM ops in the audio subsystem clocks controller driver, - updates of the definitions of some "Network On Chip" related clocks. * tag 'clk-v4.11-samsung' of git://linuxtv.org/snawrocki/samsung: clk: samsung: Remove Exynos4415 driver (SoC not supported anymore) clk: samsung: exynos-audss: Replace syscore PM with platform device PM clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical clk: samsung: Add CPU clk configuration data for Exynos4412 Prime
2017-01-20clk: sunxi-ng: add support for V3s CCUIcenowy Zheng2-0/+185
V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20Merge commit 'f8b5036361412a27c07a4ac9c3a4b80678cbd1e1' into stm32-dt-for-v4.11Alexandre TORGUE1-0/+39
2017-01-18clk: meson-gxbb: Export HDMI clocksNeil Armstrong1-0/+2
Export HDMI clock from internal to dt-bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-16Merge tag 'stm32-dt-for-v4.11-1' of ↵Olof Johansson1-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.11, round 1. Highlights: ---------- - ADD RTC support on STM32F429 MCU - Enable RTC on STM32F469and STM32F429 boards - ADD ADC support on STM32F429 MCU - Enable ADC on STM32F429 Eval board - Add I2S external clock - Fix memory size for STM32F429 Disco Note: ----- First patch "clk: stm32f4: Update DT bindings documentation") has already been merged in clock tree. * tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: enable RTC on stm32429i-eval ARM: dts: stm32: enable RTC on stm32f469-disco ARM: dts: stm32: enable RTC on stm32f429-disco ARM: dts: stm32: Add RTC support for STM32F429 MCU ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 ARM: dts: stm32: Include auxiliary stm32fx clock definition ARM: dts: stm32: Add external I2S clock on stm32f429 MCU ARM: dts: stm32: enable ADC on stm32f429i-eval board ARM: dts: stm32: Add ADC support to stm32f429 ARM: dts: stm32: Add missing USART3 pin config to stm32f469-disco board ARM: dts: stm32: Fix memory size from 8MB to 16MB on stm32f469-disco board clk: stm32f4: Update DT bindings documentation Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 15:03:43 +0000