summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings/reset
AgeCommit message (Collapse)AuthorFilesLines
2017-01-30clk: sunxi-ng: Add A80 CCUChen-Yu Tsai1-0/+102
Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Add sun5i CCU driverMaxime Ripard1-0/+32
The Allwinner A10s, A13, R8 and NextThing GR8 are all based on the same silicon, and all share the same clocks. However, they're not packaged in the same way, and therefore not all the controllers are actually available on all these SoCs. Introduce a clock controller driver for all these SoCs with different compatibles to take that into account. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20clk: sunxi-ng: add support for V3s CCUIcenowy Zheng1-0/+78
V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-15Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+323
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-11-18Merge tag 'tegra-for-4.10-firmware' of ↵Olof Johansson1-0/+217
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers firmware: Add Tegra IVC and BPMP support IVC is an inter-processor communication protocol that uses shared memory to exchange data between processors. The BPMP driver makes use of this to communicate with the Boot and Power Management Processor (BPMP) and uses an additional hardware synchronization primitive from the HSP block to signal availability of new data (doorbell). Firmware running on the BPMP implements a number of services such as the control of clocks and resets within the system, or the ability to ungate or gate power partitions. * tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18dt-bindings: firmware: Add bindings for Tegra BPMPJoseph Lo1-0/+217
The Boot and Power Management Processor (BPMP) is a co-processor found in Tegra SoCs. It is designed to handle the early stages of the boot process as well as to offload power management tasks (such as clocks, resets, powergates, ...). The binding document defines the resources that are used by the BPMP firmware, which implements the interprocessor communication (IPC) between the CPU and the BPMP. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-03clk: sunxi-ng: Add A64 clocksMaxime Ripard1-0/+98
Add the A64 CCU clocks set. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-10-20dt-bindings: reset: oxnas: Add include file with reset indexesNeil Armstrong2-0/+106
Add DT include file for Oxford Semiconductor OX810SE and OX820 reset controller support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-09-14Merge tag 'sunxi-clk-for-4.9' of ↵Stephen Boyd2-0/+193
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock driver changes from Maxime Ripard: Four more SoCs converted to the new clock framework (A31, A31s, A23 and A33). * tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Add hardware dependency clk: sunxi-ng: Add A23 CCU clk: sunxi-ng: Add A33 CCU support clk: sunxi-ng: Add N-class clocks support clk: sunxi-ng: mux: Add mux table macro clk: sunxi-ng: div: Allow to set a maximum clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure clk: sunxi-ng: div: Add mux table macros clk: sunxi-ng: Add A31/A31s clocks clk: sunxi-ng: mux: Add clk notifier functions clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents clk: sunxi-ng: mux: Add support for mux tables clk: sunxi-ng: mux: Rename mux macro to be consistent clk: sunxi-ng: nkm: Add mux to support multiple parents clk: sunxi-ng: mux: Increase fixed pre-divider div size
2016-09-10clk: sunxi-ng: Add A33 CCU supportMaxime Ripard1-0/+87
This commit introduces the clocks found in the Allwinner A33 CCU. Since this SoC is very similar to the A23, and we share a significant share of the DTSI, the clock IDs that are going to be used will also be shared with the A23, hence the name of the various header files. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-08-25clk: sunxi-ng: Add A31/A31s clocksChen-Yu Tsai1-0/+106
Add a new style driver for the clock control unit in Allwinner A31/A31s. A few clocks are still missing: - MIPI PLL's HDMI mode support - EMAC clock Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-19Merge branch 'clk-meson-gxbb-ao' into clk-nextStephen Boyd1-0/+66
* clk-meson-gxbb-ao: clk: meson: Add GXBB AO Clock and Reset controller driver dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
2016-08-19dt-bindings: clock: reset: Add GXBB AO Clock and Reset BindingsNeil Armstrong1-0/+66
Add documentations and dt-bindings headers for the AO clock and reset controller. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19reset: mediatek: Add MT2701 reset controller dt-binding fileShunli Wang1-0/+83
Dt-binding file about reset controller is used to provide kinds of definition, which is referenced by dts file and IC-specified reset controller driver code. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-15dt-bindings: Add MDM9615 DT bindings include files for GCC and LCCNeil Armstrong1-0/+136
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-0/+431
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-08clk: sunxi-ng: Add H3 clocksMaxime Ripard1-0/+103
Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-29Documentation: dt: reset: Add TI syscon reset bindingAndrew F. Davis1-0/+38
Add TI syscon reset controller binding. This will hook to the reset framework and use syscon/regmap to set reset bits. This allows reset control of individual SoC subsytems and devices with memory-mapped reset registers in a common register memory space. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-29arm64: dts: hi6220: Add media subsystem reset dtsXinliang Liu1-0/+8
Add media subsystem reset dts support. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-01dt-bindings: reset: Add bindings for the Meson SoC Reset ControllerNeil Armstrong2-0/+385
Add DT bindings for the Meson SoC Reset Controller documentation and the associated include file. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-05reset: img: Add Pistachio reset controller driverDamien Horsley1-0/+36
Add reset controller driver for Pistachio SoC Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-0/+71
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-11-24ARM: mediatek: DT: Move reset controller constants into common locationPhilipp Zabel2-0/+127
By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the mediatek reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-11-20reset: hisilicon: document hisi-hi6220 reset controllers bindingsChen Feng1-0/+67
Add DT bindings documentation for hi6220 SoC reset controller. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
2015-11-16ARM: STi: Add DT defines for co-processor reset linesLee Jones1-0/+4
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+110
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-09-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+139
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some releases this branch is nearly empty, others we have more stuff. It tends to gather drivers that need SoC modification or dependencies such that they have to (also) go in through our tree. For this release, we have merged in part of the reset controller tree (with handshake that the parts we have merged in will remain stable), as well as dependencies on a few clock branches. In general, new items here are: - Qualcomm driver for SMM/SMD, which is how they communicate with the coprocessors on (some) of their platforms - memory controller work for ARM's PL172 memory controller - reset drivers for various platforms - PMU power domain support for Marvell platforms - Tegra support for T132/T210 SoCs: PMC, fuse, memory controller per-SoC support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits) ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze() ARM: tegra: Disable cpuidle if PSCI is available soc/tegra: pmc: Use existing pclk reference soc/tegra: pmc: Remove unnecessary return statement soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile memory: tegra: Add Tegra210 support memory: tegra: Add support for a variable-size client ID bitfield clk: shmobile: rz: Add CPG/MSTP Clock Domain support clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support clk: shmobile: Add CPG/MSTP Clock Domain support ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets reset: reset-zynq: Adding support for Xilinx Zynq reset controller. docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings. MIPS: ath79: Add the reset controller to the AR9132 dtsi reset: Add a driver for the reset controller on the AR71XX/AR9XXX devicetree: Add bindings for the ATH79 reset controller reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property doc: dt: add documentation for lpc1850-rgu reset driver ...
2015-08-21Merge tag 'tegra-for-4.3-dt' of ↵Olof Johansson1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Devicetree changes for v4.3-rc1 Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on Venice2 and Jetson TK1. This also enables support for the PMU hardware found on Tegra124, which among other things, can be used for performance measurements. * tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree pinctrl: tegra: Only set the gpio range if needed clk: tegra: Add the DFLL as a possible parent of the cclk_g clock clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend clk: tegra: Add Tegra124 DFLL clocksource platform driver clk: tegra: Add DFLL DVCO reset control for Tegra124 clk: tegra: Introduce ability for SoC-specific reset control callbacks clk: tegra: Add functions for parsing CVB tables clk: tegra: Add closed loop support for the DFLL clk: tegra: Add library for the DFLL clock source (open-loop mode) clk: tegra: Add binding for the Tegra124 DFLL clocksource Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-09dt-bindings: Add reset manager offsets for Arria10Dinh Nguyen1-0/+110
The reset manager for is pretty similar to the one for SoCFPGA cyclone5/arria5 except for a few offsets. This patch adds those offsets. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-03ARM: STi: DT: Move reset controller constants into common locationPhilipp Zabel3-0/+139
By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the STi reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2015-07-16clk: tegra: Add DFLL DVCO reset control for Tegra124Paul Walmsley1-0/+12
The DVCO present in the DFLL IP block has a separate reset line, exposed via the CAR IP block. This reset line is asserted upon SoC reset. Unless something (such as the DFLL driver) deasserts this line, the DVCO will not oscillate, although reads and writes to the DFLL IP block will complete. Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and saving hours of debugging time. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> [ttynkkynen: ported to tegra124 from tegra114] Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> [mikko.perttunen: ported to special reset callback] Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-30clk: qcom: Add support for NSS/GMAC clocks and resetsStephen Boyd1-0/+43
Add the NSS/GMAC clocks and the TCM clock and NSS resets. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23dt-bindings: Add #defines for MSM8916 clocks and resetsGeorgi Djakov1-0/+108
Add clocks/resets defines for the global clock controller found on Qualcomm MSM8916 SoCs. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15clk: qcom: Add support for APQ8064 multimedia clocksStephen Boyd1-0/+8
The APQ8064 multimedia clock controller is fairly similar to the 8960 multimedia clock controller, except that gfx2d0/1 has been removed and the gfx3d frequency is slightly faster when using the newly introduced PLL15. We also add vcap clocks and a couple new TV clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15clk: qcom: Add support for IPQ8064's global clock controller (GCC)Kumar Gala1-0/+132
Add a driver for the global clock controller found on IPQ8064 based platforms. This should allow most non-multimedia device drivers to probe and control their clocks. This is currently missing clocks for USB HSIC and networking devices. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) supportGeorgi Djakov1-0/+64
Add support for the multimedia clock controller found on the APQ8084 based platforms. This will allow the multimedia device drivers to control their clocks. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> [sboyd: Rework parent mapping to avoid conflicts] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11clk: qcom: Add APQ8084 Global Clock Controller supportGeorgi Djakov1-0/+109
This patch adds support for the global clock controller found on the APQ8084 based devices. This includes UART, I2C, SPI etc. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11clk: qcom: Fully support apq8064 global clock controlStephen Boyd1-0/+16
Add in the handful of new clocks and introduce a new reset table with the few new resets. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-06-07Merge tag 'clk-for-linus-3.16' of ↵nextLinus Torvalds1-1/+1
git://git.linaro.org/people/mike.turquette/linux into next Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.16 are pretty typical: mostly clock driver additions and fixes. There are additions to the clock core code for some of the basic types (e.g. the common divider type has some fixes and featured added to it). One minor annoyance is a last-minute dependency that wasn't handled quite right. Commit ba0fae3b06a6 ("clk: berlin: add core clock driver for BG2/BG2CD") in this pull request depends on include/dt-bindings/clock/berlin2.h, which is already in your tree via the arm-soc pull request. Building for the berlin platform will break when the clk tree is built on it's own, but merged into your master branch everything should be fine" * tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits) mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs clk: export __clk_round_rate for providers clk: versatile: free icst on error return clk: qcom: Return error pointers for unimplemented clocks clk: qcom: Support msm8974pro global clock control hardware clk: qcom: Properly support display clocks on msm8974 clk: qcom: Support display RCG clocks clk: qcom: Return highest rate when round_rate() exceeds plan clk: qcom: Fix mmcc-8974's PLL configurations clk: qcom: Fix clk_rcg2_is_enabled() check clk: berlin: add core clock driver for BG2Q clk: berlin: add core clock driver for BG2/BG2CD clk: berlin: add driver for BG2x complex divider cells clk: berlin: add driver for BG2x simple PLLs clk: berlin: add driver for BG2x audio/video PLL clk: st: Terminate of match table clk/exynos4: Fix compilation warning ARM: shmobile: r8a7779: Add clock index macros for DT sources clk: divider: Fix overflow in clk_divider_bestdiv clk: u300: Terminate of match table ...
2014-05-05ARM: socfpga: dts: add reset-controllerSteffen Trumtrar1-0/+90
Add the necessary #reset-cells property to the rst-mgr node and provide a header-file with all possible resets specified. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-04-30clk: qcom: Various fixes for MSM8960's global clock controllerKumar Gala1-1/+1
* Remove CE2_SLEEP_CLK, doesn't exist on 8960 family SoCs * Fix incorrect offset for PMIC_SSBI2_RESET * Fix typo: SIC_TIC -> SPS_TIC_H SFAB_ADM0_M2_A_CLK -> SFAB_ADM0_M2_H_CLK * Fix naming convention: SFAB_CFPB_S_HCLK -> SFAB_CFPB_S_H_CLK SATA_SRC_CLK -> SATA_CLK_SRC Signed-off-by: Kumar Gala <galak@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16clk: qcom: Add support for MSM8660's global clock controller (GCC)Stephen Boyd1-0/+134
Add a driver for the global clock controller found on MSM8660 based platforms. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)Stephen Boyd1-0/+62
Add a driver for the global clock controller found on MSM 8974 based platforms. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16clk: qcom: Add support for MSM8974's global clock controller (GCC)Stephen Boyd1-0/+96
Add a driver for the global clock controller found on MSM 8974 based platforms. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)Stephen Boyd1-0/+93
Add a driver for the multimedia clock controller found on MSM 8960 based platforms. This should allow multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16clk: qcom: Add support for MSM8960's global clock controller (GCC)Stephen Boyd1-0/+118
Add a driver for the global clock controller found on MSM8960 based platforms. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-07 08:15:48 +0000