summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings/clk
AgeCommit message (Collapse)AuthorFilesLines
2014-06-10Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into ↵Mike Turquette1-0/+40
clk-next
2014-05-28dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindingsPeter Ujfalusi1-0/+40
Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-04-18dt-bindings: clock: Move at91.h to dt-bindigs/clockTushar Behera1-22/+0
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> [nicolas.ferre@atmel.com: add new at91sam9261 & at91sam9rl] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-21dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clockTushar Behera1-26/+0
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-01-23Merge tag 'clk-for-linus-3.14-part1' of ↵Linus Torvalds1-1/+2
git://git.linaro.org/people/mike.turquette/linux Pull clk framework changes from Mike Turquette: "The first half of the clk framework pull request is made up almost entirely of new platform/driver support. There are some conversions of existing drivers to the common-clock Device Tree binding, and a few non-critical fixes to the framework. Due to an entirely unnecessary cyclical dependency with the arm-soc tree this pull request is broken into two pieces. The second piece will be sent out after arm-soc sends you the pull request that merged in core support for the HiSilicon 3620 platform. That same pull request from arm-soc depends on this pull request to merge in those HiSilicon bits without causing build failures" [ Just did the ARM SoC merges, so getting ready for the second clk tree pull request - Linus ] * tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits) devicetree: bindings: Document qcom,mmcc devicetree: bindings: Document qcom,gcc clk: qcom: Add support for MSM8660's global clock controller (GCC) clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8974's global clock controller (GCC) clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8960's global clock controller (GCC) clk: qcom: Add reset controller support clk: qcom: Add support for branches/gate clocks clk: qcom: Add support for root clock generators (RCGs) clk: qcom: Add support for phase locked loops (PLLs) clk: qcom: Add a regmap type clock struct clk: Add set_rate_and_parent() op reset: Silence warning in reset-controller.h clk: sirf: re-arch to make the codes support both prima2 and atlas6 clk: composite: pass mux_hw into determine_rate clk: shmobile: Fix MSTP clock array initialization clk: shmobile: Fix MSTP clock index ARM: dts: Add clock provider specific properties to max77686 node clk: max77686: Register OF clock provider ...
2014-01-08clk: exynos-audss: add support for Exynos 5420Andrew Bresticker1-1/+2
The AudioSS block on Exynos 5420 has an additional clock gate for the ADMA bus clock. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-02clk: at91: add PMC macro file for dt definitionsBoris BREZILLON1-0/+22
This patch adds a new macro file for PMC macros. This macro file includes the definitions of SR (status register) bit offsets and will be use to reference PMC irqs. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-19clk: samsung: register audio subsystem clocks using common clock frameworkPadmavathi Venna1-0/+25
Audio subsystem is introduced in s5pv210 and exynos platforms. This has seperate clock controller which can control i2s0 and pcm0 clocks. This patch registers the audio subsystem clocks with the common clock framework on Exynos family. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>