summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_plane_helper.h
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05drm: Unexport drm_plane_helper_check_updateDaniel Vetter1-11/+0
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the primary plane helpers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
2018-10-05drm: Unexport primary plane helpersDaniel Vetter1-10/+0
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled. v2: Keep some of the nice comments about the limitations of the primarmy plane helpers, and put them into the kerneldoc for drm_crtc_init() (Sam). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch
2018-10-05drm: Remove transitional helpersDaniel Vetter1-14/+0
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than not the past 2 years, and as this little patch series shows, tricked a bunch of people into using the wrong helpers for their functions. Aside: I think a lot more drivers should be using the device-level drm_atomic_helper_shutdown/suspend/resume helpers and related functions. In almost all the cases they get things exactly right. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch
2018-07-03drm: add missing ctx argument to plane transitional helpersRussell King1-2/+4
In commits: 34a2ab5e0689 ("drm: Add acquire ctx parameter to ->update_plane") 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument. A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument. Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
2018-03-05drm: Don't pass clip to drm_atomic_helper_check_plane_state()Ville Syrjälä1-1/+0
Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2017-11-20drm: Move drm_plane_helper_check_state() into drm_atomic_helper.cVille Syrjälä1-6/+0
drm_plane_helper_check_update() isn't a transitional helper, so let's rename it to drm_atomic_helper_check_plane_state() and move it into drm_atomic_helper.c. v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-20drm: Check crtc_state->enable rather than crtc->enabled in ↵Ville Syrjälä1-1/+2
drm_plane_helper_check_state() drm_plane_helper_check_state() is supposed to do things the atomic way, so it should not be inspecting crtc->enabled. Rather we should be looking at crtc_state->enable. We have a slight complication due to drm_plane_helper_check_update() reusing drm_plane_helper_check_state() for non-atomic drivers. Thus we'll have to pass the crtc_state in manally and construct a fake crtc_state in drm_plane_helper_check_update(). v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-03-29drm: Add acquire ctx parameter to ->plane_disableDaniel Vetter1-1/+2
Nouveau had a few direct calls to ->disable_plane, I replaced those with drm_plane_force_disable. Same story for shmob. Otherwise no code changes. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->update_planeDaniel Vetter1-1/+2
Just rolling it out, no code change here. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
2016-08-16drm/kms-helpers: Extract drm_modeset_helper.[hc]Daniel Vetter1-3/+1
While reviewing docs I spotted that we have a few functions that really just don't fit into their containing helper library section. Extract them and shovel them all into a new library for random one-off aux stuff. v2: Remove wrongly added files for real. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm/plane-helper: Add drm_plane_helper_check_state()Ville Syrjälä1-0/+5
Add a version of drm_plane_helper_check_update() which takes a plane state instead of having the caller pass in everything. And to reduce code duplication, let's reimplement drm_plane_helper_check_update() in terms of the new function, by having a tempororary plane state on the stack. v2: Add a note that the functions modifies the state (Chris) v3: Fix drm_plane_helper_check_update() y coordinates (Daniel Kurtz) Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (v2) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470642910-14073-1-git-send-email-ville.syrjala@linux.intel.com
2016-06-17drm: Deal with rotation in drm_plane_helper_check_update()Ville Syrjälä1-0/+1
drm_plane_helper_check_update() needs to account for the plane rotation for correct clipping/scaling calculations. Do so. There was an earlier attempt [1] to add this into intel_check_primary_plane() but I requested that it'd be put into the helper instead. An updated patch never materialized AFAICS, so I went ahead and cooked one up myself. v2: Deal with new drm_plane_helper_check_update() callers [1] https://patchwork.freedesktop.org/patch/65177/ Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-08drm: Reorganize helper vtables and their docsDaniel Vetter1-37/+1
Currently we have 4 helper libraries (probe, crtc, plane & atomic) that all use the same helper vtables. And that's by necessity since we don't want to litter the core structs with one ops pointer per helper library. Also often the reuse the same hooks (like atomic does, to facilite conversion from existing drivers using crtc and plane helpers). Given all that it doesn't make sense to put the docs for these next to specific helpers. Instead extract them into a new header file and section in the docbook, and add references to them everywhere. Unfortunately kernel-doc complains when an include directive doesn't find anything (and it does by dumping crap into the output file). We have to remove the now empty includes to avoid that, instead of leaving them in for future proofing. v2: More OCD in ordering functions. v3: Spelling plus collate copyright headers properly. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-4-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-09-08drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.Maarten Lankhorst1-2/+0
This removes the need to separately track fb changes i915. That will be done as a separate commit, however. Changes since v1: - Add dri-devel to cc. - Fix a check in intel's prepare and cleanup fb to take rotation into account. Changes since v2: - Split out i915 changes to a separate commit. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com> [danvet: Squash in msm fixup from Maarten.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12drm/plane: Remove redundant externThierry Reding1-23/+22
Use of the extern keyword for function prototypes is unnecessary, so it can be removed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-13drm: make crtc/encoder/connector/plane helper_private a const pointerJani Nikula1-1/+1
They're only used to store const pointers anyway. This helps to keep Ville and the compiler happy. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10drm/plane-helper: unexport drm_primary_helper_create_planeDaniel Vetter1-4/+0
We shouldn't tempt driver writers into using this since it uses a default format list which is likely wrong. And when that's done we can simplify the code a bit, too. Noticed while reviewing a patch from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-05drm: Pass in new and old plane state to prepare_fb and cleanup_fbTvrtko Ursulin1-2/+4
Use cases like rotation require these hooks to have some context so they know how to prepare and cleanup the frame buffer correctly. For i915 specifically, object backing pages need to be mapped differently for different rotation modes and the driver needs to know which mapping to instantiate and which to tear down when transitioning between them. v2: Made passed in states const. (Daniel Vetter) [airlied: add mdp5 and atmel fixups] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-01-27drm/plane: Add optional ->atomic_disable() callbackThierry Reding1-0/+3
In order to prevent drivers from having to perform the same checks over and over again, add an optional ->atomic_disable callback which the core calls under the right circumstances. v2: pass old state and detect edges to avoid calling ->atomic_disable on already disabled planes, remove redundant comment (Daniel Vetter) v3: rename helper to drm_atomic_plane_disabling() to clarify that it is checking for transitions, move helper to drm_atomic_helper.h, clarify check for !old_state and its relation to transitional helpers Here's an extract from some discussion rationalizing the behaviour (for a full version, see the reference below): > > Hm, thinking about this some more this will result in a slight difference > > in behaviour, at least when drivers just use the helper ->reset functions > > but don't disable everything: > > - With transitional helpers we assume we know nothing and call > > ->atomic_disable. > > - With atomic old_state->crtc == NULL in the same situation right after > > boot-up, but we asssume the plane is really off and _dont_ call > > ->atomic_disable. > > > > Should we instead check for (old_state && old_state->crtc) and state that > > drivers need to make sure they don't have stuff hanging around? > > I don't think we can check for old_state because otherwise this will > always return false, whereas we really want it to force-disable planes > that could be on (lacking any more accurate information). For > transitional helpers anyway. > > For the atomic helpers, old_state will never be NULL, but I'd assume > that the driver would reconstruct the current state in ->reset(). By the way, the reason for why old_state can be NULL with transitional helpers is the ordering of the steps in the atomic transition. Currently the Tegra patches do this (based on your blog post and the Exynos proto- type): 1) atomic conversion, phase 1: - implement ->atomic_{check,update,disable}() - use drm_plane_helper_{update,disable}() 2) atomic conversion, phase 2: - call drm_mode_config_reset() from ->load() - implement ->reset() That's only a partial list of what's done in these steps, but that's the only relevant pieces for why old_state is NULL. What happens is that without ->reset() implemented there won't be any initial state, hence plane->state (the old_state here) will be NULL the first time atomic state is applied. We could of course reorder the sequence such that drivers are required to hook up ->reset() before they can (or at the same as they) hook up the transitional helpers. We could add an appropriate WARN_ON to this helper to make that more obvious. However, that will not solve the problem because it only gets rid of the special case. We still don't know whether old_state->crtc == NULL is the current state or just the initial default. So no matter which way we do this, I don't see a way to get away without requiring specific semantics from drivers. They would be that: - drivers recreate the correct state in ->reset() so that old_state->crtc != NULL if the plane is really enabled or - drivers have to ensure that the real state in fact mirrors the initial default as encoded in the state (plane disabled) References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27drm/plane: Make ->atomic_update() mandatoryThierry Reding1-1/+1
There is no use-case where it would be useful for drivers not to implement this function and the transitional plane helpers already require drivers to provide an implementation. v2: add new requirement to kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-25drm/plane: Add missing kerneldocThierry Reding1-0/+4
The plane helpers aren't pulled into the DocBook yet, so these weren't noticed. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-25drm/plane: Pass old state to ->atomic_update()Thierry Reding1-1/+2
In most situations it will be useful to have the old state passed to the ->atomic_update() callback. For example if a plane is being disabled the new state's .crtc field will be NULL, but some drivers may rely on this field to program the CRTCs registers. v2: rename variable to old_plane_state and remove redundant comment as suggested by Daniel Vetter, remove an Exynos hunk that doesn't apply to drm-next and add a hunk for pending MSM mdp5 changes Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05drm/crtc-helper: Transitional functions using atomic plane helpersDaniel Vetter1-0/+4
These two functions allow drivers to reuse their atomic plane helpers functions for the primary plane to implement the interfaces required by the crtc helpers for the legacy ->set_config callback. This is purely transitional and won't be used once the driver is fully converted. But it allows partial conversions to the atomic plane helpers which are functional. v2: - Use ->atomic_duplicate_state if available. - Don't forget to run crtc_funcs->atomic_check. v3: Shift source coordinates correctly for 16.16 fixed point. v4: Don't forget to call ->atomic_destroy_state if available. v5: Fixup kerneldoc. v6: Reuse the plane_commit function from the transitional plane helpers to avoid too much duplication. v7: - Remove some stale comment. - Correctly handle the lack of plane->state object, necessary for transitional use. v8: Fixup an embarrassing h/vdisplay mixup. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05drm/plane-helper: transitional atomic plane helpersDaniel Vetter1-0/+8
Converting a driver to the atomic interface can be a daunting undertaking. One of the prerequisites is to have full universal planes support. To make that transition a bit easier this patch provides plane helpers which use the new atomic helper callbacks just only for the plane changes. This way the plane update functionality can be tested without being forced to convert everything at once. Of course a real atomic update capable driver will implement the all plane properties through the atomic interface, so these helpers are mostly transitional. But they can be used to enable proper universal plane support, especially once the crtc helpers have also been adapted. v2: Use ->atomic_duplicate_state if available. v3: Don't forget to call ->atomic_destroy_state if available. v4: Fixup kerneldoc, reported by Paulo. v5: Extract a common plane_commit helper and fix some bugs in the plane_state setup of the plane_disable implementation. v6: Fix issues with the cleanup of the old fb. Since transitional helpers can be mixed we need to assume that the old fb has been set up by a legacy path (e.g. set_config or page_flip when the primary plane is converted to use these functions already). Hence pass an additional old_fb parameter to plane_commit to do that cleanup work correctly. v7: - Fix spurious WARNING (crtc helpers really love to disable stuff harder) and fix array index bonghits. - Correctly handle the lack of plane->state object, necessary for transitional use. - Don't indicate failure if drm_vblank_get doesn't work - that's expected when the pipe is in dpms off mode. v8: Review from Sean: - s/fail/out/ to make the meaning of a label more clear. - spelling fix in the commit message. Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05drm: Add atomic/plane helpersDaniel Vetter1-0/+22
This is the first cut of atomic helper code. As-is it's only useful to implement a pure atomic interface for plane updates. Later patches will integrate this with the crtc helpers so that full atomic updates are possible. We also need a pile of helpers to aid drivers in transitioning from the legacy world to the shiny new atomic age. Finally we need helpers to implement legacy ioctls on top of the atomic interface. The design of the overall helpers<->driver interaction is fairly simple, but has an unfortunate large interface: - We have ->atomic_check callbacks for crtcs and planes. The idea is that connectors don't need any checking, and if they do they can adjust the relevant crtc driver-private state. So no connector hooks should be needed. Also the crtc helpers integration will do the ->best_encoder checks, so no need for that. - Framebuffer pinning needs to be done before we can commit to the hw state. This is especially important for async updates where we must pin all buffers before returning to userspace, so that really only hw failures can happen in the asynchronous worker. Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources management. - The actual atomic plane commit can't fail (except hw woes), so has void return type. It has three stages: 1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can use this to unset the GO bit or similar latches to prevent plane updates. 2. Update plane state by looping over all changed planes and calling plane->atomic_update. Presuming the hardware is sane and has GO bits drivers can simply bash the state into the hardware in this function. Other drivers might use this to precompute hw state for the final step. 3. Finally latch the update for the next vblank with crtc->atomic_flush. Note that this function doesn't need to wait for the vblank to happen even for the synchronous case. v2: Clear drm_<obj>_state->state to NULL when swapping in state. v3: Add TODO that we don't short-circuit plane updates for now. Likely no one will care. v4: Squash in a bit of polish that somehow landed in the wrong (later) patche. v5: Integrate atomic functions into the drm docbook and fixup the kerneldoc. v6: Fixup fixup patch squashing fumble. v7: Don't touch the legacy plane state plane->fb and plane->crtc. This is only used by the legacy ioctl code in the drm core, and that code already takes care of updating the pointers in all relevant cases. This is in stark contrast to connector->encoder->crtc links on the modeset side, which we still need to set since the core doesn't touch them. Also some more kerneldoc polish. v8: Drop outdated comment. v9: Handle the state->state pointer correctly: Only clearing the ->state pointer when assigning the state to the kms object isn't good enough. We also need to re-link the swapped out state into the drm_atomic_state structure. v10: Shuffle the misplaced docbook template hunk around that Sean spotted. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.hDaniel Vetter1-0/+5
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-06-05drm/plane-helper: Add drm_plane_helper_check_update() (v3)Matt Roper1-0/+22
Pull the parameter checking from drm_primary_helper_update() out into its own function; drivers that provide their own setplane() implementations rather than using the helper may still want to share this parameter checking logic. A few of the checks here were also updated based on suggestions by Ville Syrjälä. v3: - s/primary_helper/plane_helper/ --- this checking logic may be useful for other types of planes as well. - Fix visibility check (need to dereference visibility pointer) v2: - Pass src/dest/clip rects and min/max scaling down to helper to avoid duplication of effort between helper and drivers (suggested by Ville). - Allow caller to specify whether the primary plane should be updatable while the crtc is disabled. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> [danvet: Include header properly and fixup declaration mismatch to make this compile.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02drm/plane: Fix sparse warningsThierry Reding1-1/+1
Include the drm_plane_helper.h header file to fix the following sparse warnings: CHECK drivers/gpu/drm/drm_plane_helper.c drivers/gpu/drm/drm_plane_helper.c:102:5: warning: symbol 'drm_primary_helper_update' was not declared. Should it be static? drivers/gpu/drm/drm_plane_helper.c:219:5: warning: symbol 'drm_primary_helper_disable' was not declared. Should it be static? drivers/gpu/drm/drm_plane_helper.c:233:6: warning: symbol 'drm_primary_helper_destroy' was not declared. Should it be static? drivers/gpu/drm/drm_plane_helper.c:241:30: warning: symbol 'drm_primary_helper_funcs' was not declared. Should it be static? drivers/gpu/drm/drm_plane_helper.c:259:18: warning: symbol 'drm_primary_helper_create_plane' was not declared. Should it be static? Doing that makes gcc complain as follows: CC drivers/gpu/drm/drm_plane_helper.o drivers/gpu/drm/drm_plane_helper.c:260:19: error: conflicting types for 'drm_primary_helper_create_plane' struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev, ^ In file included from drivers/gpu/drm/drm_plane_helper.c:29:0: include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev, ^ drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_create_plane': drivers/gpu/drm/drm_plane_helper.c:274:11: warning: assignment discards 'const' qualifier from pointer target type formats = safe_modeset_formats; ^ In file included from include/linux/linkage.h:6:0, from include/linux/kernel.h:6, from include/drm/drmP.h:45, from drivers/gpu/drm/drm_plane_helper.c:27: drivers/gpu/drm/drm_plane_helper.c: At top level: drivers/gpu/drm/drm_plane_helper.c:289:15: error: conflicting types for 'drm_primary_helper_create_plane' EXPORT_SYMBOL(drm_primary_helper_create_plane); ^ include/linux/export.h:57:21: note: in definition of macro '__EXPORT_SYMBOL' extern typeof(sym) sym; \ ^ drivers/gpu/drm/drm_plane_helper.c:289:1: note: in expansion of macro 'EXPORT_SYMBOL' EXPORT_SYMBOL(drm_primary_helper_create_plane); ^ In file included from drivers/gpu/drm/drm_plane_helper.c:29:0: include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev, ^ Which can easily be fixed by making the signatures of the implementation and the prototype match. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01drm: Add primary plane helpers (v3)Matt Roper1-0/+49
When we expose non-overlay planes to userspace, they will become accessible via standard userspace plane API's. We should be able to handle the standard plane operations against primary planes in a generic way via the modeset handler. Drivers that can program primary planes more efficiently, that want to use their own primary plane structure to track additional information, or that don't have the limitations assumed by the helpers are free to provide their own implementation of some or all of these handlers. v3: Tweak kerneldoc formatting slightly to avoid ugliness v2: - Move plane helpers to a new file (drm_plane_helper.c) - Tighten checks on update handler (check for scaling, CRTC coverage, subpixel positioning) - Pass proper panning parameters to modeset interface - Disallow disabling primary plane (and thus CRTC) if other planes are still active on the CRTC. - Use a minimal format list that should work on all hardware/drivers. Drivers may call this function with a more accurate plane list to enable additional formats they can support. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>