summaryrefslogtreecommitdiffstats
path: root/include/crypto
AgeCommit message (Collapse)AuthorFilesLines
2019-11-17crypto: ablkcipher - remove deprecated and unused ablkcipher supportArd Biesheuvel7-119/+2
Now that all users of the deprecated ablkcipher interface have been moved to the skcipher interface, ablkcipher is no longer used and can be removed. Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routineArd Biesheuvel1-0/+11
Reimplement the library routines to perform chacha20poly1305 en/decryption on scatterlists, without [ab]using the [deprecated] blkcipher interface, which is rather heavyweight and does things we don't really need. Instead, we use the sg_miter API in a novel and clever way, to iterate over the scatterlist in-place (i.e., source == destination, which is the only way this library is expected to be used). That way, we don't have to iterate over two scatterlists in parallel. Another optimization is that, instead of relying on the blkcipher walker to present the input in suitable chunks, we recognize that ChaCha is a streamcipher, and so we can simply deal with partial blocks by keeping a block of cipherstream on the stack and use crypto_xor() to mix it with the in/output. Finally, we omit the scatterwalk_and_copy() call if the last element of the scatterlist covers the MAC as well (which is the common case), avoiding the need to walk the scatterlist and kmap() the page twice. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha20poly1305 - import construction and selftest from ZincArd Biesheuvel1-0/+37
This incorporates the chacha20poly1305 from the Zinc library, retaining the library interface, but replacing the implementation with calls into the code that already existed in the kernel's crypto API. Note that this library API does not implement RFC7539 fully, given that it is limited to 64-bit nonces. (The 96-bit nonce version that was part of the selftest only has been removed, along with the 96-bit nonce test vectors that only tested the selftest but not the actual library itself) Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - generic C library implementationsJason A. Donenfeld1-0/+71
This contains two formally verified C implementations of the Curve25519 scalar multiplication function, one for 32-bit systems, and one for 64-bit systems whose compiler supports efficient 128-bit integer types. Not only are these implementations formally verified, but they are also the fastest available C implementations. They have been modified to be friendly to kernel space and to be generally less horrendous looking, but still an effort has been made to retain their formally verified characteristic, and so the C might look slightly unidiomatic. The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto Information: https://cr.yp.to/ecdh.html Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [ardb: - move from lib/zinc to lib/crypto - replace .c #includes with Kconfig based object selection - drop simd handling and simplify support for per-arch versions ] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - implement generic shash driverArd Biesheuvel1-0/+5
Wire up our newly added Blake2s implementation via the shash API. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - generic C library implementation and selftestJason A. Donenfeld2-0/+125
The C implementation was originally based on Samuel Neves' public domain reference implementation but has since been heavily modified for the kernel. We're able to do compile-time optimizations by moving some scaffolding around the final function into the header file. Information: https://blake2.net/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Co-developed-by: Samuel Neves <sneves@dei.uc.pt> [ardb: - move from lib/zinc to lib/crypto - remove simd handling - rewrote selftest for better coverage - use fixed digest length for blake2s_hmac() and rename to blake2s256_hmac() ] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - depend on generic library not generic shashArd Biesheuvel1-9/+0
Remove the dependency on the generic Poly1305 driver. Instead, depend on the generic library so that we only reuse code without pulling in the generic skcipher implementation as well. While at it, remove the logic that prefers the non-SIMD path for short inputs - this is no longer necessary after recent FPU handling changes on x86. Since this removes the last remaining user of the routines exported by the generic shash driver, unexport them and make them static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - expose init/update/final library interfaceArd Biesheuvel1-1/+37
Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/poly1305 - unify Poly1305 state struct with generic codeArd Biesheuvel2-11/+11
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: poly1305 - move core routines into a separate libraryArd Biesheuvel2-23/+67
Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha - unexport chacha_generic routinesArd Biesheuvel1-10/+0
Now that all users of generic ChaCha code have moved to the core library, there is no longer a need for the generic ChaCha skcpiher driver to export parts of it implementation for reuse by other drivers. So drop the exports, and make the symbols static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: x86/chacha - expose SIMD ChaCha routine as library functionArd Biesheuvel1-0/+6
Wire the existing x86 SIMD ChaCha code into the new ChaCha library interface, so that users of the library interface will get the accelerated version when available. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: chacha - move existing library code into lib/cryptoArd Biesheuvel2-17/+113
Currently, our generic ChaCha implementation consists of a permute function in lib/chacha.c that operates on the 64-byte ChaCha state directly [and which is always included into the core kernel since it is used by the /dev/random driver], and the crypto API plumbing to expose it as a skcipher. In order to support in-kernel users that need the ChaCha streamcipher but have no need [or tolerance] for going through the abstractions of the crypto API, let's expose the streamcipher bits via a library API as well, in a way that permits the implementation to be superseded by an architecture specific one if provided. So move the streamcipher code into a separate module in lib/crypto, and expose the init() and crypt() routines to users of the library. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - remove the "blkcipher" algorithm typeEric Biggers3-94/+0
Now that all "blkcipher" algorithms have been converted to "skcipher", remove the blkcipher algorithm type. The skcipher (symmetric key cipher) algorithm type was introduced a few years ago to replace both blkcipher and ablkcipher (synchronous and asynchronous block cipher). The advantages of skcipher include: - A much less confusing name, since none of these algorithm types have ever actually been for raw block ciphers, but rather for all length-preserving encryption modes including block cipher modes of operation, stream ciphers, and other length-preserving modes. - It unified blkcipher and ablkcipher into a single algorithm type which supports both synchronous and asynchronous implementations. Note, blkcipher already operated only on scatterlists, so the fact that skcipher does too isn't a regression in functionality. - Better type safety by using struct skcipher_alg, struct crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc. - It sometimes simplifies the implementations of algorithms. Also, the blkcipher API was no longer being tested. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - unify the crypto_has_skcipher*() functionsEric Biggers1-18/+1
crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they check for the availability of an algorithm of type skcipher, blkcipher, or ablkcipher, which also meets any non-type constraints the caller specified. And they have exactly the same prototype. Therefore, eliminate the redundancy by removing crypto_has_skcipher() and renaming crypto_has_skcipher2() to crypto_has_skcipher(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-05crypto: algif_skcipher - Use chunksize instead of blocksizeHerbert Xu2-30/+30
When algif_skcipher does a partial operation it always process data that is a multiple of blocksize. However, for algorithms such as CTR this is wrong because even though it can process any number of bytes overall, the partial block must come at the very end and not in the middle. This is exactly what chunksize is meant to describe so this patch changes blocksize to chunksize. Fixes: 8ff590903d5f ("crypto: algif_skcipher - User-space...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-27Merge branch 'next-integrity' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
2019-09-09crypto: skcipher - add the ability to abort a skcipher walkArd Biesheuvel1-0/+5
After starting a skcipher walk, the only way to ensure that all resources it has tied up are released is to complete it. In some cases, it will be useful to be able to abort a walk cleanly after it has started, so add this ability to the skcipher walk API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: sha256 - Remove sha256/224_init code duplicationHans de Goede2-24/+30
lib/crypto/sha256.c and include/crypto/sha256_base.h define 99% identical functions to init a sha256_state struct for sha224 or sha256 use. This commit moves the functions from lib/crypto/sha256.c to include/crypto/sha.h (making them static inline) and makes the sha224/256_base_init static inline functions from include/crypto/sha256_base.h wrappers around the now also static inline include/crypto/sha.h functions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: sha256 - Merge crypto/sha256.h into crypto/sha.hHans de Goede2-34/+21
The generic sha256 implementation from lib/crypto/sha256.c uses data structs defined in crypto/sha.h, so lets move the function prototypes there too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: sha256 - Add sha224 support to sha256 library codeHans de Goede1-0/+5
Add sha224 support to the lib/crypto/sha256 library code. This will allow us to replace both the sha256 and sha224 parts of crypto/sha256_generic.c when we remove the code duplication in further patches in this series. Suggested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: sha256 - Make lib/crypto/sha256.c suitable for generic useHans de Goede1-2/+3
Before this commit lib/crypto/sha256.c has only been used in the s390 and x86 purgatory code, make it suitable for generic use: * Export interesting symbols * Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to avoid the exports for the purgatory builds * Add to lib/crypto/Makefile and crypto/Kconfig Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: sha256 - Move lib/sha256.c to lib/cryptoHans de Goede1-0/+28
Generic crypto implementations belong under lib/crypto not directly in lib, likewise the header should be in include/crypto, not include/linux. Note that the code in lib/crypto/sha256.c is not yet available for generic use after this commit, it is still only used by the s390 and x86 purgatory code. Making it suitable for generic use is done in further patches in this series. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des - remove now unused __des3_ede_setkey()Ard Biesheuvel1-3/+0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des - split off DES library from generic DES cipher driverArd Biesheuvel2-33/+79
Another one for the cipher museum: split off DES core processing into a separate module so other drivers (mostly for crypto accelerators) can reuse the code without pulling in the generic DES cipher itself. This will also permit the cipher interface to be made private to the crypto API itself once we move the only user in the kernel (CIFS) to this library interface. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des - remove unused functionArd Biesheuvel1-41/+0
Remove the old DES3 verification functions that are no longer used. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des/3des_ede - add new helpers to verify keysArd Biesheuvel1-0/+141
The recently added helper routine to perform key strength validation of triple DES keys is slightly inadequate, since it comes in two versions, neither of which are highly useful for anything other than skciphers (and many drivers still use the older blkcipher interfaces). So let's add a new helper and, considering that this is a helper function that is only intended to be used by crypto code itself, put it in a new des.h header under crypto/internal. While at it, implement a similar helper for single DES, so that we can start replacing the pattern of calling des_ekey() into a temp buffer that occurs in many drivers in drivers/crypto. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-09crypto: aes - helper function to validate key length for AES algorithmsIuliana Prodan1-0/+17
Add inline helper function to check key length for AES algorithms. The key can be 128, 192 or 256 bits size. This function is used in the generic aes implementation. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-09crypto: gcm - helper functions for assoclen/authsize checkIuliana Prodan1-0/+55
Added inline helper functions to check authsize and assoclen for gcm, rfc4106 and rfc4543. These are used in the generic implementation of gcm, rfc4106 and rfc4543. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-05PKCS#7: Introduce pkcs7_get_digest()Thiago Jung Bauermann1-0/+4
IMA will need to access the digest of the PKCS7 message (as calculated by the kernel) before the signature is verified, so introduce pkcs7_get_digest() for that purpose. Also, modify pkcs7_digest() to detect when the digest was already calculated so that it doesn't have to do redundant work. Verifying that sinfo->sig->digest isn't NULL is sufficient because both places which allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info()) use kzalloc() so sig->digest is always initialized to zero. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-02crypto: api - Remove redundant #ifdef in crypto_yield()Thomas Gleixner1-2/+0
While looking at CONFIG_PREEMPT dependencies treewide the #ifdef in crypto_yield() matched. CONFIG_PREEMPT and CONFIG_PREEMPT_VOLUNTARY are mutually exclusive so the extra !CONFIG_PREEMPT conditional is redundant. cond_resched() has only an effect when CONFIG_PREEMPT_VOLUNTARY is set, otherwise it's a stub which the compiler optimizes out. Remove the whole conditional. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-crypto@vger.kernel.org Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-02crypto: user - fix potential warnings in cryptouser.hMasahiro Yamada1-1/+4
Function definitions in headers are usually marked as 'static inline'. Since 'inline' is missing for crypto_reportstat(), if it were not referenced from a .c file that includes this header, it would produce a warning. Also, 'struct crypto_user_alg' is not declared in this header. I included <linux/crytouser.h> instead of adding the forward declaration as suggested [1]. Detected by compile-testing this header as a standalone unit: ./include/crypto/internal/cryptouser.h:6:44: warning: ‘struct crypto_user_alg’ declared inside parameter list will not be visible outside of this definition or declaration struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact); ^~~~~~~~~~~~~~~ ./include/crypto/internal/cryptouser.h:11:12: warning: ‘crypto_reportstat’ defined but not used [-Wunused-function] static int crypto_reportstat(struct sk_buff *in_skb, struct nlmsghdr *in_nlh, struct nlattr **attrs) ^~~~~~~~~~~~~~~~~ [1] https://lkml.org/lkml/2019/6/13/1121 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-02crypto: add header include guardsMasahiro Yamada4-0/+20
Add header include guards in case they are included multiple times. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-27crypto: ghash - add comment and improve help textEric Biggers1-1/+1
To help avoid confusion, add a comment to ghash-generic.c which explains the convention that the kernel's implementation of GHASH uses. Also update the Kconfig help text and module descriptions to call GHASH a "hash function" rather than a "message digest", since the latter normally means a real cryptographic hash function, which GHASH is not. Cc: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: user - make NETLINK_CRYPTO work inside netnsOndrej Mosnacek1-2/+0
Currently, NETLINK_CRYPTO works only in the init network namespace. It doesn't make much sense to cut it out of the other network namespaces, so do the minor plumbing work necessary to make it work in any network namespace. Code inspired by net/core/sock_diag.c. Tested using kcapi-dgst from libkcapi [1]: Before: # unshare -n kcapi-dgst -c sha256 </dev/null | wc -c libkcapi - Error: Netlink error: sendmsg failed libkcapi - Error: Netlink error: sendmsg failed libkcapi - Error: NETLINK_CRYPTO: cannot obtain cipher information for hmac(sha512) (is required crypto_user.c patch missing? see documentation) 0 After: # unshare -n kcapi-dgst -c sha256 </dev/null | wc -c 32 [1] https://github.com/smuellerDD/libkcapi Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: morus - remove generic and x86 implementationsArd Biesheuvel3-212/+0
MORUS was not selected as a winner in the CAESAR competition, which is not surprising since it is considered to be cryptographically broken [0]. (Note that this is not an implementation defect, but a flaw in the underlying algorithm). Since it is unlikely to be in use currently, let's remove it before we're stuck with it. [0] https://eprint.iacr.org/2019/172.pdf Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: lib/aes - export sbox and inverse sboxArd Biesheuvel1-0/+3
There are a few copies of the AES S-boxes floating around, so export the ones from the AES library so that we can reuse them in other modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aes-generic - unexport last-round AES tablesArd Biesheuvel1-2/+0
The versions of the AES lookup tables that are only used during the last round are never used outside of the driver, so there is no need to export their symbols. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: ctr - add helper for performing a CTR encryption walkArd Biesheuvel1-0/+50
Add a static inline helper modeled after crypto_cbc_encrypt_walk() that can be reused for SIMD algorithms that need to implement a non-SIMD fallback for performing CTR encryption. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aes-generic - drop key expansion routine in favor of library versionArd Biesheuvel1-2/+0
Drop aes-generic's version of crypto_aes_expand_key(), and switch to the key expansion routine provided by the AES library. AES key expansion is not performance critical, and it is better to have a single version shared by all AES implementations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aes - create AES library based on the fixed time AES codeArd Biesheuvel1-0/+34
Take the existing small footprint and mostly time invariant C code and turn it into a AES library that can be used for non-performance critical, casual use of AES, and as a fallback for, e.g., SIMD code that needs a secondary path that can be taken in contexts where the SIMD unit is off limits (e.g., in hard interrupts taken from kernel context) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-08Merge branch 'linus' of ↵Linus Torvalds9-144/+77
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-06-20crypto: arc4 - refactor arc4 core code into separate libraryArd Biesheuvel1-0/+10
Refactor the core rc4 handling so we can move most users to a library interface, permitting us to drop the cipher interface entirely in a future patch. This is part of an effort to simplify the crypto API and improve its robustness against incorrect use. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu1-1/+7
Merge crypto tree to pick up vmx changes.
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner3-12/+3
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13crypto: chacha - constify ctx and iv argumentsEric Biggers1-1/+1
Constify the ctx and iv arguments to crypto_chacha_init() and the various chacha*_stream_xor() functions. This makes it clear that they are not modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: skcipher - make chunksize and walksize accessors internalEric Biggers2-60/+60
The 'chunksize' and 'walksize' properties of skcipher algorithms are implementation details that users of the skcipher API should not be looking at. So move their accessor functions from <crypto/skcipher.h> to <crypto/internal/skcipher.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: skcipher - un-inline encrypt and decrypt functionsEric Biggers1-30/+2
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be more than a single indirect function call. They now also check whether a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the crypto statistics. That can add up to a lot of bloat at every call site. Moreover, these always involve a function call anyway, which greatly limits the benefits of inlining. So change them to be non-inline. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: aead - un-inline encrypt and decrypt functionsEric Biggers1-32/+2
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more than a single indirect function call. They now also check whether a key has been set, the decryption side checks whether the input is at least as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y they also update the crypto statistics. That can add up to a lot of bloat at every call site. Moreover, these always involve a function call anyway, which greatly limits the benefits of inlining. So change them to be non-inline. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>