summaryrefslogtreecommitdiffstats
path: root/include/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2020-09-24clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.hZhen Lei1-29/+0
Since commit 7484c727b636 ("ARM: realview: delete the RealView board files") and commit 16956fed35fe ("ARM: versatile: switch to DT only booting and remove legacy code"), there's no one to use the functions defined or declared in include/clocksource/timer-sp804.h. Delete it. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-3-thunder.leizhen@huawei.com
2020-08-12include/: replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20200726110117.16346-1-grandmaster@al2klimov.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-30pwm: omap-dmtimer: Drop unused header fileLokesh Vutla1-2/+1
pwm_omap_dmtimer.h is used only: - to typedef struct omap_dm_timer to pwm_omap_dmtimer - for macro PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE Rest of the file is pretty mush unsed. So reuse omap_dm_timer and OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE in pwm-omap-dmtimer.c and delete the header file. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-16clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save ↵Lokesh Vutla1-2/+1
and restore omap_dm_timer_enable() restores the entire context(including counter) based on 2 conditions: - If get_context_loss_count is populated and context is lost. - If get_context_loss_count is not populated update unconditionally. Case2 has a side effect of updating the counter register even though context is not lost. When timer is configured in pwm mode, this is causing undesired behaviour in the pwm period. Instead of using get_context_loss_count call back, implement cpu_pm notifier with context save and restore support. And delete the get_context_loss_count callback all together. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [tony@atomide.com: removed pm_runtime calls from cpuidle calls] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200316111453.15441-1-lokeshvutla@ti.com
2020-03-16clocksource/drivers/timer-ti-dm: Prepare for using cpuidleTony Lindgren1-0/+1
Let's add runtime_suspend and resume functions and atomic enabled flag. This way we can use these when converting to use cpuidle for saving and restoring device context. And we need to maintain the driver state in the driver as documented in "9. Autosuspend, or automatically-delayed suspends" in the Documentation/power/runtime_pm.rst document related to using driver private lock and races with runtime_suspend(). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-3-lokeshvutla@ti.com
2020-01-16clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksourcesAndrea Parri1-1/+1
hyperv_timer.c exports hyperv_cs, which is used by stimers and the timesync mechanism. However, the clocksource dependency is not needed: these mechanisms only depend on the partition reference counter (which can be read via a MSR or via the TSC Reference Page). Introduce the (function) pointer hv_read_reference_counter, as an embodiment of the partition reference counter read, and export it in place of the hyperv_cs pointer. The latter can be removed. This should clarify that there's no relationship between Hyper-V stimers & timesync and the Linux clocksource abstractions. No functional or semantic change. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com
2019-11-15x86/hyperv: Initialize clockevents earlier in CPU onliningMichael Kelley1-3/+4
Hyper-V has historically initialized stimer-based clockevents late in the process of onlining a CPU because clockevents depend on stimer interrupts. In the original Hyper-V design, stimer interrupts generate a VMbus message, so the VMbus machinery must be running first, and VMbus can't be initialized until relatively late. On x86/64, LAPIC timer based clockevents are used during early initialization before VMbus and stimer-based clockevents are ready, and again during CPU offlining after the stimer clockevents have been shut down. Unfortunately, this design creates problems when offlining CPUs for hibernation or other purposes. stimer-based clockevents are shut down relatively early in the offlining process, so clockevents_unbind_device() must be used to fallback to the LAPIC-based clockevents for the remainder of the offlining process. Furthermore, the late initialization and early shutdown of stimer-based clockevents doesn't work well on ARM64 since there is no other timer like the LAPIC to fallback to. So CPU onlining and offlining doesn't work properly. Fix this by recognizing that stimer Direct Mode is the normal path for newer versions of Hyper-V on x86/64, and the only path on other architectures. With stimer Direct Mode, stimer interrupts don't require any VMbus machinery. stimer clockevents can be initialized and shut down consistent with how it is done for other clockevent devices. While the old VMbus-based stimer interrupts must still be supported for backward compatibility on x86, that mode of operation can be treated as legacy. So add a new Hyper-V stimer entry in the CPU hotplug state list, and use that new state when in Direct Mode. Update the Hyper-V clocksource driver to allocate and initialize stimer clockevents earlier during boot. Update Hyper-V initialization and the VMbus driver to use this new design. As a result, the LAPIC timer is no longer used during boot or CPU onlining/offlining and clockevents_unbind_device() is not called. But retain the old design as a legacy implementation for older versions of Hyper-V that don't support Direct Mode. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
2019-08-23clocksource/drivers/hyperv: Enable TSC page clocksource on 32bitVitaly Kuznetsov1-5/+3
There is no particular reason to not enable TSC page clocksource on 32-bit. mul_u64_u64_shr() is available and despite the increased computational complexity (compared to 64bit) TSC page is still a huge win compared to MSR-based clocksource. In-kernel reads: MSR based clocksource: 3361 cycles TSC page clocksource: 49 cycles Reads from userspace (utilizing vDSO in case of TSC page): MSR based clocksource: 5664 cycles TSC page clocksource: 131 cycles Enabling TSC page on 32bits allows to get rid of CONFIG_HYPERV_TSCPAGE as it is now not any different from CONFIG_HYPERV_TIMER. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lkml.kernel.org/r/20190822083630.17059-1-vkuznets@redhat.com
2019-07-03clocksource/drivers: Continue making Hyper-V clocksource ISA agnosticMichael Kelley1-0/+80
Continue consolidating Hyper-V clock and timer code into an ISA independent Hyper-V clocksource driver. Move the existing clocksource code under drivers/hv and arch/x86 to the new clocksource driver while separating out the ISA dependencies. Update Hyper-V initialization to call initialization and cleanup routines since the Hyper-V synthetic clock is not independently enumerated in ACPI. Update Hyper-V clocksource users in KVM and VDSO to get definitions from the new include file. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-3-git-send-email-mikelley@microsoft.com
2019-07-03clocksource/drivers: Make Hyper-V clocksource ISA agnosticMichael Kelley1-0/+27
Hyper-V clock/timer code and data structures are currently mixed in with other code in the ISA independent drivers/hv directory as well as the ISA dependent Hyper-V code under arch/x86. Consolidate this code and data structures into a Hyper-V clocksource driver to better follow the Linux model. In doing so, separate out the ISA dependent portions so the new clocksource driver works for x86 and for the in-process Hyper-V on ARM64 code. To start, move the existing clockevents code to create the new clocksource driver. Update the VMbus driver to call initialization and cleanup routines since the Hyper-V synthetic timers are not independently enumerated in ACPI. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner2-24/+2
so the hyper-v clocksource update can be applied.
2019-06-25clocksource/drivers/davinci: Add support for clockeventsBartosz Golaszewski1-0/+44
Currently the clocksource and clockevent support for davinci platforms lives in mach-davinci. It hard-codes many things, uses global variables, implements functionalities unused by any platform and has code fragments scattered across many (often unrelated) files. Implement a new, modern and simplified timer driver and put it into drivers/clocksource. We still need to support legacy board files so export a config structure and a function that allows machine code to register the timer. The timer we're using is 64-bit but can be programmed in dual 32-bit mode (both chained and unchained). On all davinci SoCs except for da830 we're using both halves. Lower half for clockevents and upper half for clocksource. On da830 we're using the lower half for both with the help of a compare register. This patch contains the core code and support for clockevent. The clocksource code will be included in a subsequent patch. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19clocksource/arm_arch_timer: Store physical timer IRQ number for KVM on VHEAndre Przywara1-0/+1
A host running in VHE mode gets the EL2 physical timer as its time source (accessed using the EL1 sysreg accessors, which get re-directed to the EL2 sysregs by VHE). The EL1 physical timer remains unused by the host kernel, allowing us to pass that on directly to a KVM guest and saves us from emulating this timer for the guest on VHE systems. Store the EL1 Physical Timer's IRQ number in struct arch_timer_kvm_info on VHE systems to allow KVM to use it. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2018-04-05Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+394
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
2018-02-28clocksource: timer-ti-dm: Make unexported functions staticLadislav Michl1-33/+0
As dmtimer no longer exports functions, make those previously exported static (this requires few functions to be moved around as their prototypes were deleted). Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-23clocksource: Remove metag generic timer driverJames Hogan1-21/+0
Now that arch/metag/ has been removed, remove the metag generic per-thread timer driver. It is of no value without the architecture code. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-metag@vger.kernel.org
2018-02-22clocksource: timer-ti-dm: Replace architectureKeerthy1-5/+3
Replace architecture specific guard with clocksource guard. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22ARM: OMAP: Move dmtimer.h out of plat-omapKeerthy1-0/+429
The header file is currently under plat-omap directory under arch/omap. Move this out to an accessible place. No Code changes done to the header file and renamed to timer-ti-dm.h. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-13arm64: use WFE for long delaysJulien Thierry1-1/+3
The current delay implementation uses the yield instruction, which is a hint that it is beneficial to schedule another thread. As this is a hint, it may be implemented as a NOP, causing all delays to be busy loops. This is the case for many existing CPUs. Taking advantage of the generic timer sending periodic events to all cores, we can use WFE during delays to reduce power consumption. This is beneficial only for delays longer than the period of the timer event stream. If timer event stream is not enabled, delays will behave as yield/busy loops. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-13arm_arch_timer: Expose event stream statusJulien Thierry1-0/+6
The arch timer configuration for a CPU might get reset after suspending said CPU. In order to reliably use the event stream in the kernel (e.g. for delays), we keep track of the state where we can safely consider the event stream as properly configured. After writing to cntkctl, we issue an ISB to ensure that subsequent delay loops can rely on the event stream being enabled. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-19clocksource: arm_arch_timer: add structs to describe MMIO timerFu Wei1-0/+16
In preparation for ACPI GTDT support, this patch adds structs to describe the MMIO timers indepedent of the firmware interface. Subsequent patches will use these to split the FW/HW probing logic, so that the HW probing logic can be shared by ACPI and DT. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: add a new enum for spi typeFu Wei1-0/+6
This patch add a new enum "arch_timer_spi_nr" and use it in the driver. Just for code's readability, no functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2017-04-10clocksource: arm_arch_timer: move enums and defines to header fileFu Wei1-0/+12
To support the arm_arch_timer via ACPI we need to share defines and enums between the driver and the ACPI parser code. So we split out the relevant defines and enums into arm_arch_timer.h. No functional change. Signed-off-by: Fu Wei <fu.wei@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
2016-10-18ARM: sa11x0/pxa: acquire timer rate from the clock rateRobert Jarzmik1-2/+1
As both pxa and sa1100 provide a clock to the timer, the rate can be inferred from the clock rather than hard encoded in a functional call. This patch changes the pxa timer to have a mandatory clock which is used as the timer rate. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-06-28clocksource/drivers/sp804: Convert init function to return errorDaniel Lezcano1-4/+4
The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-05-03clocksource: arm_arch_timer: Remove arch_timer_get_timecounterJulien Grall1-6/+0
The only call of arch_timer_get_timecounter (in KVM) has been removed. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQJulien Grall1-0/+1
Currently, the firmware table is parsed by the virtual timer code in order to retrieve the virtual timer interrupt. However, this is already done by the arch timer driver. To avoid code duplication, extend arch_timer_kvm_info to get the virtual IRQ. Note that the KVM code will be modified in a subsequent patch. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03clocksource: arm_arch_timer: Gather KVM specific information in a structureJulien Grall1-0/+5
Introduce a structure which are filled up by the arch timer driver and used by the virtual timer in KVM. The first member of this structure will be the timecounter. More members will be added later. A stub for the new helper isn't introduced because KVM requires the arch timer for both ARM64 and ARM32. The function arch_timer_get_timecounter is kept for the time being and will be dropped in a subsequent patch. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-12-14arm64: KVM: Implement timer save/restoreMarc Zyngier1-0/+6
Implement the timer save restore as a direct translation of the assembly code version. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-02ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksourceSudeep Holla1-0/+28
The ARM Dual-Timer SP804 module is peripheral found not only on ARM32 platforms but also on ARM64 platforms. This patch moves the driver out of arch/arm to driver/clocksource so that it can be used on ARM64 platforms also. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Olof Johansson <olof@lixom.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-12-30time: move the timecounter/cyclecounter code into its own file.Richard Cochran1-1/+1
The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23ARM: pxa: Add non device-tree timer link to clocksourceRobert Jarzmik1-0/+18
As clocksource pxa_timer was moved to clocksource framework, the pxa_timer initialization needs to be a bit amended, to pass the necessary informations to clocksource, ie : - the timer interrupt (mach specific) - the timer registers base (ditto) - the timer clockrate Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-09-26drivers: clocksource: add support for ARM architected timer event streamWill Deacon1-0/+2
The ARM architected timer can generate events (used for waking up CPUs executing the wfe instruction) at a frequency represented as a power-of-2 divisor of the clock rate. An event stream might be used: - To implement wfe-based timeouts for userspace locking implementations. - To impose a timeout on a wfe for safeguarding against any programming error in case an expected event is not generated. This patch computes the event stream frequency aiming for a period of 100us between events. It uses ARM/ARM64 specific backends to configure and enable the event stream. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Will Deacon <will.deacon@arm.com> [sudeep: moving ARM/ARM64 changes into separate patches and adding Kconfig option] Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-09-26ARM/ARM64: arch_timer: add macros for bits in control registerSudeep KarkadaNagesha1-0/+8
Add macros to describe the bitfields in the ARM architected timer control register to make code easy to understand. Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-08-12pwm: Add new pwm-samsung driverTomasz Figa1-0/+7
This patch introduces new Samsung PWM driver, which is completely rewritten to be multiplatform- and DeviceTree-aware. In addition, remaining problems of old driver are fixed, such as: - proper handling of hardware variants, - synchronization on SMP systems, - handling of boundary parameter values, - hardware sharing with PWM clocksource driver, - undefined state of PWM output after stopping PWM channel. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-01clocksource: arch_timer: Add support for memory mapped timersStephen Boyd1-1/+3
Add support for the memory mapped timers by filling in the read/write functions and adding some parsing code. Note that we only register one clocksource, preferring the cp15 based clocksource over the mmio one. To keep things simple we register one global clockevent. This covers the case of UP and SMP systems with only mmio hardware and systems where the memory mapped timers are used as the broadcast timer in low power modes. The DT binding allows for per-CPU memory mapped timers in case we want to support that in the future, but the code isn't added here. We also don't do much for hypervisor support, although it should be possible to support it by searching for at least two frames where one frame has the virtual capability and then updating KVM timers to support it. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: Rob Herring <robherring2@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com>
2013-08-01clocksource: arch_timer: Make register accessors less error-proneStephen Boyd1-2/+4
Using an enum for the register we wish to access allows newer compilers to determine if we've forgotten a case in our switch statement. This allows us to remove the BUILD_BUG() instances in the arm64 port, avoiding problems where optimizations may not happen. To try and force better code generation we're currently marking the accessor functions as inline, but newer compilers can ignore the inline keyword unless it's marked __always_inline. Luckily on arm and arm64 inline is __always_inline, but let's make everything __always_inline to be explicit. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com>
2013-06-07clocksource: arch_timer: use virtual countersMark Rutland1-1/+1
Switching between reading the virtual or physical counters is problematic, as some core code wants a view of time before we're fully set up. Using a function pointer and switching the source after the first read can make time appear to go backwards, and having a check in the read function is an unfortunate block on what we want to be a fast path. Instead, this patch makes us always use the virtual counters. If we're a guest, or don't have hyp mode, we'll use the virtual timers, and as such don't care about CNTVOFF as long as it doesn't change in such a way as to make time appear to travel backwards. As the guest will use the virtual timers, a (potential) KVM host must use the physical timers (which can wake up the host even if they fire while a guest is executing), and hence a host must have CNTVOFF set to zero so as to have a consistent view of time between the physical timers and virtual counters. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rob Herring <rob.herring@calxeda.com>
2013-05-07Merge tag 'multiplatform-for-linus-2' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...
2013-04-28clocksource: samsung_pwm_timer: Add support for non-DT platformsTomasz Figa1-0/+3
This patch extends the driver to support platforms that still use legacy ATAGS-based boot, without device tree, by providing an exported function that can be used from platform code to initialize the clocksource. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-28clocksource: samsung_pwm_timer: Drop unused samsung_pwm structTomasz Figa1-10/+0
This patch removes the unused samsung_pwm struct from public header. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-28clocksource: samsung_pwm_timer: Make PWM spinlock globalTomasz Figa1-0/+2
This patch makes the PWM spinlock global and exports it to allow using it in Samsung PWM driver (will be reworked to use proper synchronization in further patches). Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-21clocksource: add samsung pwm timer driverTomasz Figa1-0/+41
This adds a new clocksource driver for the PWM timer that is present in most Samsung SoCs, based on the existing driver in arch/arm/plat-samsung/samsung-time.c and many changes implemented by Tomasz Figa. Originally, the conversion of all Samsung machines to the new driver was planned for 3.10, but that work ended up being too late and too invasive just before the merge window. Unfortunately, other changes in the Exynos platform resulted in some Exynos4 setups, particularly the Universal C210 board to be broken. In order to fix that with minimum risk, so we now leave the existing pwm clocksource driver in place for all older platforms and use the new driver only for device tree enabled boards. This way, we can get the broken machines running again using DT descriptions. All clocksource changes were implemented by Tomasz, while the DT registration was rewritten by Arnd. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-11ARM: convert arm/arm64 arch timer to use CLKSRC_OF initRob Herring1-6/+0
This converts arm and arm64 to use CLKSRC_OF DT based initialization for the arch timer. A new function arch_timer_arch_init is added to allow for arch specific setup. This has a side effect of enabling sched_clock on omap5 and exynos5. There should not be any reason not to use the arch timers for sched_clock. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-sh@vger.kernel.org Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-03Merge tag 'metag-v3.9-rc1-v4' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ...