summaryrefslogtreecommitdiffstats
path: root/include/asm-x86/apic.h
AgeCommit message (Collapse)AuthorFilesLines
2008-10-22x86, um: ... and asm-x86 moveAl Viro1-199/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-16x2apic: fix reserved APIC register accesses in print_local_APIC()Yinghai Lu1-0/+14
APIC_ARBPRI is a reserved register for XAPIC and beyond. APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors. APIC_EOI is a write only register. APIC_DFR is reserved in x2apic mode. Access to these registers in x2apic will result in #GP fault. Fix these apic register accesses. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: remove ioapic_forceYinghai Lu1-2/+0
no user left. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar1-6/+59
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-10-06Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', ↵Ingo Molnar1-3/+1
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1
2008-10-06Merge branch 'x86/prototypes' into x86-v28-for-linus-phase1Ingo Molnar1-0/+5
Conflicts: arch/x86/kernel/process_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14Merge branches 'x86/prototypes', 'x86/x2apic' and 'x86/debug' into x86/coreIngo Molnar1-0/+5
2008-07-26Merge branch 'x86/x2apic' into x86/coreIngo Molnar1-6/+59
Conflicts: include/asm-x86/i8259.h include/asm-x86/msidef.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86: fix up a comment in ack_APIC_irq()Maciej W. Rozycki1-3/+1
Adjust a comment in ack_APIC_irq() according to the recent removal of CONFIG_X86_GOOD_APIC. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-23x86: apic_XX.c declare functions before they get usedJaswinder Singh1-0/+5
declared following smp interrupts in asm-x86/hw_irq.h: smp_apic_timer_interrupt, smp_spurious_interrupt, smp_error_interrupt Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
2008-07-22x86: consolidate header guardsVegard Nossum1-3/+3
This patch is the result of an automatic script that consolidates the format of all the headers in include/asm-x86/. The format: 1. No leading underscore. Names with leading underscores are reserved. 2. Pathname components are separated by two underscores. So we can distinguish between mm_types.h and mm/types.h. 3. Everything except letters and numbers are turned into single underscores. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2008-07-22x64, apic: use generic apic_write() for ack_APIC_irq()Suresh Siddha1-4/+0
I tested tip/master and found an issue (patch attached) for x2apic support. This is not because of the recent merges we had, but because of something(where we still access memory based interface after enabling x2apic mode) that slipped through my earlier tests. Probably it is a good idea to unmap the memory mapped interface, once we switch to x2apic mode. That will catch the issues much earlier. I will post another patch for this. ack_APIC_irq() is used at too many generic places (and not just during irq_chip handling!) to use the native_apic_mem_write(). For ex, this will break x2apic based systems. Fix ack_APIC_irq() to use the generic apic_write() even for 64-bit. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: suresh.b.siddha@intel.com Cc: yong.y.wang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22Merge branch 'linus' into x86/x2apicIngo Molnar1-2/+0
2008-07-21x86: convert Dprintk to pr_debugThomas Gleixner1-2/+0
There are a couple of places where (P)Dprintk is used which is an old compile time enabled printk wrapper. Convert it to the generic pr_debug(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18Merge branch 'x86/apic' into x86/x2apicIngo Molnar1-20/+9
Conflicts: arch/x86/kernel/paravirt.c arch/x86/kernel/smpboot.c arch/x86/kernel/vmi_32.c arch/x86/lguest/boot.c arch/x86/xen/enlighten.c include/asm-x86/apic.h include/asm-x86/paravirt.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: more apic debuggingMaciej W. Rozycki1-1/+1
[ mingo@elte.hu: picked up this patch from Maciej, lets make apic=debug print out more info - we had a lot of APIC changes ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: APIC: Make apic_verbosity unsignedMaciej W. Rozycki1-1/+1
As a microoptimisation, make apic_verbosity unsigned. This will make apic_printk(APIC_QUIET, ...) expand into just printk(...) with the surrounding condition and a reference to apic_verbosity removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: APIC: remove apic_write_around(); use alternativesMaciej W. Rozycki1-17/+7
Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86: let 32bit use apic_ops tooYinghai Lu1-11/+2
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: add x2apic support, including enabling ↵Suresh Siddha1-0/+5
interrupt-remapping x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: IO-APIC support for interrupt-remappingSuresh Siddha1-0/+9
IO-APIC support in the presence of interrupt-remapping infrastructure. IO-APIC RTE will be programmed with interrupt-remapping table entry(IRTE) index and the IRTE will contain information about the vector, cpu destination, trigger mode etc, which traditionally was present in the IO-APIC RTE. Introduce a new irq_chip for cleaner irq migration (in the process context as opposed to the current irq migration in the context of an interrupt. interrupt-remapping infrastructure will help us achieve this cleanly). For edge triggered, irq migration is a simple atomic update(of vector and cpu destination) of IRTE and flush the hardware cache. For level triggered, we need to modify the io-apic RTE aswell with the update vector information, along with modifying IRTE with vector and cpu destination. So irq migration for level triggered is little bit more complex compared to edge triggered migration. But the good news is, we use the same algorithm for level triggered migration as we have today, only difference being, we now initiate the irq migration from process context instead of the interrupt context. In future, when we do a directed EOI (combined with cpu EOI broadcast suppression) to the IO-APIC, level triggered irq migration will also be as simple as edge triggered migration and we can do the irq migration with a simple atomic update to IO-APIC RTE. TBD: some tests/changes needed in the presence of fixup_irqs() for level triggered irq migration. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: x2apic ops for x2apic mode supportSuresh Siddha1-0/+22
x2apic ops for x2apic mode support. This uses MSR interface and differs slightly from the xapic register layout. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: basic apic ops supportSuresh Siddha1-6/+37
Introduce basic apic operations which handle the apic programming. This will be used later to introduce another specific operations for x2apic. For the perfomance critial accesses like IPI's, EOI etc, we use the native operations as they are already referenced by different indirections like genapic, irq_chip etc. 64bit Paravirt ops can also define their apic operations accordingly. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: merge tsc_init and clocksource codeAlok Kataria1-1/+6
Unify the clocksource code. Unify the tsc_init code. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Dan Hecht <dhecht@vmware.com> Cc: Dan Hecht <dhecht@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: use disable_apic in 32bitYinghai Lu1-4/+0
change the enable_local_apic to static force_enable_local_apic for 32bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: let setup_arch call init_apic_mappings for 32bitYinghai Lu1-0/+1
instead of calling it from trap_init() also move init ioapic mapping out of apic_32.c so 32 bit do same as 64 bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: check command line when CONFIG_X86_MPPARSE is not set, v2Yinghai Lu1-1/+5
if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', ↵Ingo Molnar1-4/+0
'x86/build', 'x86/cleanups', 'x86/cpa', 'x86/cpu', 'x86/defconfig', 'x86/gart', 'x86/i8259', 'x86/intel', 'x86/irqstats', 'x86/kconfig', 'x86/ldt', 'x86/mce', 'x86/memtest', 'x86/pat', 'x86/ptemask', 'x86/resumetrace', 'x86/threadinfo', 'x86/timers', 'x86/vdso' and 'x86/xen' into x86/devel
2008-07-08x86: I/O APIC: remove parameters to fiddle with the 8259AMaciej W. Rozycki1-1/+0
Remove the "disable_8254_timer" and "enable_8254_timer" kernel parameters. Now that AEOI acknowledgements are no longer needed for correct timer operation, the 8259A can be kept disabled unconditionally unless interrupts, either timer or watchdog ones, are actually passed through it. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, clockevents: add C1E aware idle functionThomas Gleixner1-3/+0
C1E on AMD machines is like C3 but without control from the OS. Up to now we disabled the local apic timer for those machines as it stops when the CPU goes into C1E. This excludes those machines from high resolution timers / dynamic ticks, which hurts especially X2 based laptops. The current boot time C1E detection has another, more serious flaw as well: some BIOSes do not enable C1E until the ACPI processor module is loaded. This causes systems to stop working after that point. To work nicely with C1E enabled machines we use a separate idle function, which checks on idle entry whether C1E was enabled in the Interrupt Pending Message MSR. This allows us to do timer broadcasting for C1E and covers the late enablement of C1E as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17include/asm-x86/apic.h: checkpatch cleanups - formatting onlyJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: fix build breakage when PCI is define and PARAVIRT is notRavikiran G Thirumalai1-5/+2
- Fix the the build breakage when PARAVIRT is defined but PCI is not This fixes problem reported at: http://marc.info/?l=linux-kernel&m=120525966600698&w=2 - Make is_vsmp_box() available even when PARAVIRT is not defined. This is needed to determine if tsc's are reliable as a time source even when PARAVIRT is not defined. - split vsmp_init to use is_vsmp_box() and set_vsmp_pv_ops() set_vsmp_pv_ops will do nothing if PCI is not enabled in the config. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: change boot_cpu_id to boot_cpu_physical_apicidGlauber de Oliveira Costa1-1/+0
This is to match i386. The former name was cuter, but the current is more meaningful and more general, since cpu_id can be a logical id. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: include mach_apic.h in smpboot_64.c and smpboot.cGlauber de Oliveira Costa1-1/+0
After the inclusion, a lot of files needs fixing for conflicts, some of them in the headers themselves, to accomodate for both i386 and x86_64 versions. [ mingo@elte.hu: build fix ] Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: get boot_cpu_id as early for k8_scan_nodesYinghai Lu1-0/+1
When acpi=off or there is no SRAT defined, apicid_to_node is got from K8 Northbridge PCI configuration space in k8_scan_nodes() in arch/x86_64/mm/k8toplogy.c. The problem is that it assumes bsp apic id is 0 at that point. For four socket system with Quad core cpus installed, all cpus apic id is offset by 4, and bsp apic id is 4. For eight socket system with dual core cpus installed, all cpus apic id is offset by 2, and bsp apic id is 2. We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called. So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: apic_is_clustered_box for vsmpYinghai Lu1-0/+5
quad core 8 socket system will have apic id lifting.the apic id range could be [4, 0x23]. and apic_is_clustered_box will think that need to three clusters and that is larger than 2. So it is treated as a clustered_box. and will get: Marking TSC unstable due to TSCs unsynchronized even if the CPUs have X86_FEATURE_CONSTANT_TSC set. this quick fix will check if the cpu is from AMD. but vsmp still needs that checking... this patch is fix to make sure that vsmp not to be passed. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: adjust enable_NMI_through_LVT0()Jan Beulich1-1/+1
Its previous use in a call to on_each_cpu() was pointless, as at the time that code gets executed only one CPU is online. Further, the function can be __cpuinit, and for this to work without CONFIG_HOTPLUG_CPU setup_nmi() must also get an attribute (this one can even be __init; on 64-bits check_timer() also was lacking that attribute). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove fastcall from include/asm-x86Harvey Harrison1-3/+3
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: extended interrupt LVT support for AMD BarcelonaRobert Richter1-2/+2
Also macro definitions in apicdef.h has been updated. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: untable __init references between IO dataAndi Kleen1-0/+1
Earlier patch added IO APIC setup into local APIC setup. This caused modpost warnings. Fix them by untangling setup_local_APIC() and splitting it into smaller functions. The IO APIC initialization is only called for the BP init. Also removed some outdated debugging code and minor cleanup. [ tglx: arch/x86 adaptation ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cleanup smp.h variantsThomas Gleixner1-0/+1
Bring the smp.h variants into sync to prepare merging and paravirt support. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make smp_local_timer_interrupt() staticThomas Gleixner1-1/+0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: merge apic_32/64.hThomas Gleixner1-3/+137
Unify apic.h variants. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11i386/x86_64: move headers to include/asm-x86Thomas Gleixner1-0/+5
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 01:16:51 +0000