summaryrefslogtreecommitdiffstats
path: root/include/asm-sh
AgeCommit message (Collapse)AuthorFilesLines
2007-02-11[PATCH] consolidate line discipline number definitionsTilman Schmidt1-18/+0
The line discipline numbers N_* are currently defined for each architecture individually, but (except for a seeming mistake) identically, in asm/termios.h. There is no obvious reason why these numbers should be architecture specific, nor any apparent relationship with the termios structure. The total number of these, NR_LDISCS, is defined in linux/tty.h anyway. So I propose the following patch which moves the definitions of the individual line disciplines to linux/tty.h too. Three of these numbers (N_MASC, N_PROFIBUS_FDL, and N_SMSBLOCK) are unused in the current kernel, but the patch still keeps the complete set in case there are plans to use them yet. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[APM] SH: Convert to use shared APM emulation.Paul Mundt1-46/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-13[PATCH] Optimize D-cache alias handling on forkRalf Baechle3-0/+6
Virtually index, physically tagged cache architectures can get away without cache flushing when forking. This patch adds a new cache flushing function flush_cache_dup_mm(struct mm_struct *) which for the moment I've implemented to do the same thing on all architectures except on MIPS where it's a no-op. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] PM: Fix SMP races in the freezerRafael J. Wysocki1-0/+2
Currently, to tell a task that it should go to the refrigerator, we set the PF_FREEZE flag for it and send a fake signal to it. Unfortunately there are two SMP-related problems with this approach. First, a task running on another CPU may be updating its flags while the freezer attempts to set PF_FREEZE for it and this may leave the task's flags in an inconsistent state. Second, there is a potential race between freeze_process() and refrigerator() in which freeze_process() running on one CPU is reading a task's PF_FREEZE flag while refrigerator() running on another CPU has just set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it. If the refrigerator wins the race, freeze_process() will state that PF_FREEZE hasn't been set for the task and will set it unnecessarily, so the task will go to the refrigerator once again after it's been thawed. To solve first of these problems we need to stop using PF_FREEZE to tell tasks that they should go to the refrigerator. Instead, we can introduce a special TIF_*** flag and use it for this purpose, since it is allowed to change the other tasks' TIF_*** flags and there are special calls for it. To avoid the freeze_process()-refrigerator() race we can make freeze_process() to always check the task's PF_FROZEN flag after it's read its "freeze" flag. We should also make sure that refrigerator() will always reset the task's "freeze" flag after it's set PF_FROZEN for it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12sh: SH-MobileR SH7722 CPU support.Paul Mundt5-7/+22
This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fixup dma_cache_sync() callers.Paul Mundt1-5/+5
This now takes a struct device, update all of the callers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: BUG() handling through trapa vector.Paul Mundt1-9/+44
Previously we haven't been doing anything with verbose BUG() reporting, and we've been relying on the oops path for handling BUG()'s, which is rather sub-optimal. This switches BUG handling to use a fixed trapa vector (#0x3e) where we construct a small bug frame post trapa instruction to get the context right. This also makes it trivial to wire up a DIE_BUG for the atomic die chain, which we couldn't really do before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Split out atomic ops logically.Paul Mundt3-151/+180
We have a few different ways to do the atomic operations, so split them out in to different headers rather than bloating atomic.h. Kernelspace gUSA will take this up to a third implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: landisk board build fixes.Paul Mundt1-1/+1
Get the landisk board building again.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: push-switch fixups for work_struct API damage.Paul Mundt1-0/+3
INIT_WORK() dropped the data arg, so now we have to stash an extra pointer and backpedal instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Shut up csum_ipv6_magic() warnings.Paul Mundt1-35/+34
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Reworked swap cache entry encoding for SH-X2 MMU.Paul Mundt1-6/+41
In the 64-bit PTE case there's no point in restricting the encoding to the low bits of the PTE, we can instead bump all of this up to the high 32 bits and extend PTE_FILE_MAX_BITS to 32, adopting the same convention used by x86 PAE. There's a minor discrepency between the number of bits used for the swap type encoding between 32 and 64-bit PTEs, but this is unlikely to cause any problem given the extended offset. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-08[PATCH] tty: preparatory structures for termios revampAlan Cox1-0/+11
In order to sort out our struct termios and add proper speed control we need to separate the kernel and user termios structures. Glibc is fine but the other libraries rely on the kernel exported struct termios and we need to extend this without breaking the ABI/API To do so we add a struct ktermios which is the kernel view of a termios structure and overlaps the struct termios with extra fields on the end for now. (That limitation will go away in later patches). Some platforms (eg alpha) planned ahead and thus use the same struct for both, others did not. This just adds the structures but does not use them, it seems a sensible splitting point for bisect if there are compile failures (not that I expect them) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] cleanup asm/setup.h userspace visibilityAdrian Bunk1-2/+4
Make the contents of the userspace asm/setup.h header consistent on all architectures: - export setup.h to userspace on all architectures - export only COMMAND_LINE_SIZE to userspace - frv: move COMMAND_LINE_SIZE from param.h - i386: remove duplicate COMMAND_LINE_SIZE from param.h - arm: - export ATAGs to userspace - change u8/u16/u32 to __u8/__u16/__u32 Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Pass struct dev pointer to dma_cache_sync()Ralf Baechle1-1/+1
Pass struct dev pointer to dma_cache_sync() dma_cache_sync() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_cache_sync to take a struct device pointer as first argument and fix all its callers to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] remove kernel syscallsArnd Bergmann1-137/+0
The last thing we agreed on was to remove the macros entirely for 2.6.19, on all architectures. Unfortunately, I think nobody actually _did_ that, so they are still there. [akpm@osdl.org: x86_64 fix] Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Schafer <gschafer@zip.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06sh: sh775x/titan fixes for irq header changes.Jamie Lenehan2-33/+31
The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup pte_mkhuge() build failure.Paul Mundt1-0/+8
When hugetlbpage support isn't enabled, this can be bogus. Wrap it back in _PAGE_FLAGS_HARD to avoid changes to the base PTE when not aiming for larger sizes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: stacktrace/lockdep/irqflags tracing support.Paul Mundt3-101/+150
Wire up all of the essentials for lockdep.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup movli.l/movco.l atomic ops for gcc4.Paul Mundt1-24/+24
gcc4 gets a bit pissy about the outputs: include/asm/atomic.h: In function 'atomic_add': include/asm/atomic.h:37: error: invalid lvalue in asm statement include/asm/atomic.h:30: error: invalid lvalue in asm output 1 ... this ended up being a thinko anyways, so just fix it up. Verified for proper behaviour with the older toolchains, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dyntick infrastructure.Paul Mundt1-0/+21
This adds basic NO_IDLE_HZ support to the SH timer API so timers are able to wire it up. Taken from the ARM version, as it fit in to our API with very few changes needed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Clock framework tidying.Paul Mundt1-10/+2
This syncs up the SH clock framework with the linux/clk.h API, for which there were only some minor changes required, namely the clk_get() dev_id and subsequent callsites. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup various PAGE_SIZE == 4096 assumptions.Paul Mundt3-11/+6
There were a number of places that made evil PAGE_SIZE == 4k assumptions that ended up breaking when trying to play with 8k and 64k page sizes, this fixes those up. The most significant change is the way we load THREAD_SIZE, previously this was done via: mov #(THREAD_SIZE >> 8), reg shll8 reg to avoid a memory access and allow the immediate load. With a 64k PAGE_SIZE, we're out of range for the immediate load size without resorting to special instructions available in later ISAs (movi20s and so on). The "workaround" for this is to bump up the shift to 10 and insert a shll2, which gives a bit more flexibility while still being much cheaper than a memory access. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dma-api channel capability extensions.Mark Glaisher1-11/+29
This extends the SH DMA API for allowing handling of DMA channels based off of their respective capabilities. A couple of functions are added to the existing API, the core bits are register_chan_caps() for registering channel capabilities, and request_dma_bycap() for fetching a channel dynamically based off of a capability set. Signed-off-by: Mark Glaisher <mark.glaisher@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: KSTK_EIP/KSTK_ESP consistency.Stuart Menefy1-2/+2
Two of the fields in /proc/[number]/stat are documented in proc(5) as: kstkesp %lu The current value of esp (stack pointer), as found in the kernel stack page for the process. kstkeip %lu The current EIP (instruction pointer). The SH currently prints the the last SP and PC of the process inside the kernel, while most other archs use the last user space values. This patch modifes the SH to display the user space values. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: TLB miss fast-path optimizations.Stuart Menefy1-3/+3
Handle simple TLB miss faults which can be resolved completely from the page table in assembler. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: generic push-switch framework.Paul Mundt1-0/+28
This adds support for a generic push switch framework. Adaptable for various switches, including GPIO switches and the push switches commonly found on Renesas debug boards. This allows switch states to be trivially reported through sysfs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: pmd rework.Stuart Menefy2-31/+27
Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Use MMU.TTB register as pointer to current pgd.Stuart Menefy1-21/+23
Add TTB accessor functions and give it a sensible default value. We will use this later for optimizing the fault path. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Set up correct siginfo structures for page faults.Stuart Menefy1-9/+3
Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Preliminary support for SH-X2 MMU.Paul Mundt4-144/+324
This adds some preliminary support for the SH-X2 MMU, used by newer SH-4A parts (particularly SH7785). This MMU implements a 'compat' mode with SH-X MMUs and an 'extended' mode for SH-X2 extended features. Extended features include additional page sizes (8kB, 4MB, 64MB), as well as the addition of page execute permissions. The extended mode attributes are placed in a second data array, which requires us to switch to 64-bit PTEs when in X2 mode. With the addition of the exec perms, we also overhaul the mmap prots somewhat, now that it's possible to handle them more intelligently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Hook SH7785 in to the build system.Paul Mundt2-1/+4
Simple 7785 placeholders to start hooking up other bits of code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Drop CPU subtype IRQ headers.Paul Mundt6-1754/+1
This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: SE7206 build fixes.Paul Mundt3-1/+20
A number of API changes happened underneath the 7206 patches, update for everything that broke. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add SH-2A platform headers.Yoshinori Sato19-9/+415
Mostly SH-2 wrappers.. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-04[PATCH] Centralise definitions of sector_t and blkcnt_tMatthew Wilcox1-10/+0
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-02[NET]: SH checksum annotations and cleanups.Al Viro1-30/+29
* sanitize prototypes, annotate * kill useless shifts * usual ntohs->shift Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-01Driver core: add dev_archdata to struct deviceBenjamin Herrenschmidt1-0/+7
Add arch specific dev_archdata to struct device Adds an arch specific struct dev_arch to struct device. This enables architecture to add specific fields to every device in the system, like DMA operation pointers, NUMA node ID, firmware specific data, etc... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Andi Kleen <ak@suse.de> Acked-By: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-31sh: Fix IPR-IRQ's for IRQ-chip change breakage.Jamie Lenehan1-2/+8
The conversion from IPR-IRQ to IRQ-chip resulted in the ipr data being allocated in a local variable in make_ipr_irq - breaking anything using IPR interrupts. This changes all of the callers of make_ipr_irq to allocate a static structure containing the IPR data which is then passed to make_ipr_irq. This removes the need for make_ipr_irq to allocate any additional space for the IPR information. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31sh: Wire up new syscalls.Paul Mundt1-1/+4
This wires up sys_move_pages, sys_getcpu, and sys_epoll_pwait. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-20sh: Convert INTC2 to IRQ table registration.Paul Mundt3-13/+1
Currently the INTC2 code contains a fixed IRQ table that it iterates through to set the handler type, we move this in to the CPU subtype setup code instead and allow for submitting the table that way. This drops the ST40 tables, as nothing has been happening with those processors, while converting the only existing users to use the new table directly (SH7760 and SH7780). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Add some missing board headers.Paul Mundt6-0/+420
Some of these were dropped in the header directory rework, add the few missing ones back in. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Fix exception_handling_table alignment.Paul Mundt1-0/+7
With the recent change ripping out interrupt_table, explicit padding of the table was missing, causing bad things to happen when manually inserting handlers in to the table. This problem particularly showed up in relation to do_fpu_state_restore() which was inserted quite deeply in to the table and ended up scribbling over a slab object. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Cleanup board header directories.Paul Mundt7-434/+0
Now with the ide.h mess sorted out, most of these boards don't need their own directory. Move the headers out, and update the driver paths. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Remove board-specific ide.h headers.Paul Mundt7-72/+0
The driver that these were using never made it in to drivers/ide, so kill off the rest of the cruft. These will have to be reworked for board-specific platform devices through libata when they're added back through the setup code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Proper show_stack/show_trace() implementation.Paul Mundt1-0/+2
This splits out some of the previous show_stack() implementation which was mostly doing the show_trace() work without actually dumping any of the stack contents. This now gets split in to two sections, where we do the fetching of the stack pointer and subsequent stack dumping in show_stack(), while moving the call trace in to show_trace(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds5-14/+55
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: SH-4A UBC support sh: interrupt exception handling rework sh: Default enable R7780RP IRQs. sh: Zero-out coherent buffer in consistent_alloc(). sh: Convert IPR-IRQ to IRQ chip. sh: Convert INTC2 IRQ handler to irq_chip. sh: Fix pr_debug statements for sh4 sh: Convert r7780rp IRQ handler to IRQ chip. sh: Updates for IRQ handler changes. sh: Kill off timer_ops get_frequency(). sh: First step at generic timeofday support.
2006-10-12sh: SH-4A UBC supportRyusuke Sakato1-0/+37
A simple patch to enable the UBC on SH-4A. Signed-off-by: Ryusuke Sakato <sakato@hsdv.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-11[PATCH] Consolidate check_signatureMatthew Wilcox1-16/+0
There's nothing arch-specific about check_signature(), so move it to <linux/io.h>. Use a cross between the Alpha and i386 implementations as the generic one. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06sh: Convert INTC2 IRQ handler to irq_chip.Paul Mundt1-6/+8
More struct irq_chip conversions, this time the INTC2 handlers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 05:59:31 +0000