summaryrefslogtreecommitdiffstats
path: root/include/asm-ppc
AgeCommit message (Collapse)AuthorFilesLines
2007-10-22ppc: fix AT_VECTOR_SIZE on arch/ppcGrant Likely1-0/+1
Commit 4f9a58d75bfe82ab2b8ba5b8506dfb190a267834 ("increase AT_VECTOR_SIZE to terminate saved_auxv properly") changes the size of AT_VECTOR_SIZE from hard coded '44' to a calculation based on the value of AT_VECTOR_SIZE_ARCH and AT_VECTOR_SIZE_BASE. The change works for arch/powerpc, but it breaks arch/ppc because the needed AT_VECTOR_SIZE_ARCH is not present in include/asm-ppc/system.h and a default value of 0 is used instead. This results in AT_VECTOR_SIZE being too small and it causes a kernel crash on loading init. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19remove asm/bitops.h includesJiri Slaby1-1/+2
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Replace __attribute_pure__ with __pureRalf Baechle1-1/+1
To be consistent with the use of attributes in the rest of the kernel replace all use of __attribute_pure__ with __pure and delete the definition of __attribute_pure__. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Merge branch 'merge' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits) [POWERPC] Fix vmemmap warning in init_64.c [POWERPC] Fix 64 bits vDSO DWARF info for CR register [POWERPC] Add 1TB workaround for PA6T [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs [POWERPC] Quieten cache information at boot [POWERPC] Quieten clockevent printk [POWERPC] Enable SLUB in *_defconfig [POWERPC] Fix 1TB segment detection [POWERPC] Fix iSeries_hpte_insert prototype [POWERPC] Fix copyright symbol [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers [POWERPC] ibmebus: Add device creation and bus probing based on of_device [POWERPC] ibmebus: Remove bus match/probe/remove functions [POWERPC] Move of_device allocation into of_device.[ch] [POWERPC] mpc52xx: device tree changes for FEC and MDIO [POWERPC] bestcomm: GenBD task support [POWERPC] bestcomm: FEC task support [POWERPC] bestcomm: ATA task support [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes ...
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle1-17/+0
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17cleanup floppy.hJan Beulich1-2/+0
AUTO_DMA and FLOPPY_MOTOR_MASK in include/asm-*/floppy.h are dead symbols - remove them. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17softlockup: make asm/irq_regs.h available on every platformIngo Molnar1-0/+1
The softlockup detector would like to use get_irq_regs(), so generalize the availability on every Linux architecture. (It is fine for an architecture to always return NULL to get_irq_regs(), which it does by default.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ian Molton <spyro@f2s.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changesSylvain Munaut1-2/+8
On the mpc5200b the ccr register is 32 bits wide while on the mpc5200 it's only 16 bits. It's up to the driver to use the correct format depending on the chip it's running on. The 5200b also offers some more registers & status in AC97 mode. Again, if not running on a 5200b the driver should not use those. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-22[POWERPC] Prevent direct inclusion of <asm/rwsem.h>.Robert P. J. Day1-1/+1
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17[POWERPC] Remove APUS support from arch/ppcAdrian Bunk8-337/+6
Current status of APUS: - arch/powerpc/: removed in 2.6.23 - arch/ppc/: marked BROKEN since 2 years This therefore removes the remaining parts of APUS support from arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[PPC] Add clrbits8 and setbits8.Scott Wood1-0/+3
These I/O accessors will be used in code under drivers/, which is expected to still work in arch/ppc. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we needKumar Gala1-11/+0
To build arch/powerpc without including asm-ppc/ we need these files in asm-powerpc/ Moved some headers under arch/powerpc/platforms if they were only used by platform or driver files and fixed up the source file includes to match the new locations Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Remove get_property and device_is_compatibleStephen Rothwell1-1/+0
They were only needed for backwards compatibility and all in tree uses have now been changed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-24[WATCHDOG] mv64x60_wdt: Add arch/powerpc platform supportDale Farnsworth1-8/+0
Add support for arch/powerpc, specifically for the prpmc2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24[WATCHDOG] mv64x60_wdt: set up platform_device in platform codeDale Farnsworth1-1/+1
The driver previously registered its platform device data in its own init function--that's bogus. Move that code to platform-specific code in arch/ppc. This is being done so that the platform code can decide at runtime whether to initialize this driver or not. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-22[POWERPC] Fix ARCH=ppc buildsJosh Boyer1-0/+1
The recent signal rework broke ARCH=ppc builds with the following error: CC arch/powerpc/kernel/signal.o arch/powerpc/kernel/signal.c: In function ‘do_signal’: arch/powerpc/kernel/signal.c:142: error: implicit declaration of function ‘set_dabr’ make[1]: *** [arch/powerpc/kernel/signal.o] Error 1 This fixes it by including a function prototype in asm-ppc/system.h. Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-19[PATCH] sched: sched_cacheflush is now unusedRalf Baechle1-10/+0
Since Ingo's recent scheduler rewrite which was merged as commit 0437e109e1841607f2988891eaa36c531c6aa6ac sched_cacheflush is unused. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-17mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirtyMartin Schwidefsky1-7/+0
Nobody is using ptep_test_and_clear_dirty and ptep_clear_flush_dirty. Remove the functions from all architectures. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16page table handling cleanupJan Beulich1-10/+0
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(), pte_exec(), and pte_user() except where arch-specific code is making use of them. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-11PCI: remove pci_dac_dma_... APIsJan Beulich1-6/+0
Based on replies to a respective query, remove the pci_dac_dma_...() APIs (except for pci_dac_dma_supported() on Alpha, where this function is used in non-DAC PCI DMA code). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: David Miller <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()Michael Ellerman1-2/+0
I'm not sure if this is going to fly, weak symbols work on the compilers I'm using, but whether they work for all of the affected architectures I can't say. I've cc'ed as many arch maintainers/lists as I could find. But assuming they do, we can use a weak empty definition of pcibios_add_platform_entries() to avoid having an empty definition on every arch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-16Rework ptep_set_access_flags and fix sun4cBenjamin Herrenschmidt1-4/+8
Some changes done a while ago to avoid pounding on ptep_set_access_flags and update_mmu_cache in some race situations break sun4c which requires update_mmu_cache() to always be called on minor faults. This patch reworks ptep_set_access_flags() semantics, implementations and callers so that it's now responsible for returning whether an update is necessary or not (basically whether the PTE actually changed). This allow fixing the sparc implementation to always return 1 on sun4c. [akpm@linux-foundation.org: fixes, cleanups] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: David Miller <davem@davemloft.net> Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk> Acked-by: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10Merge branch 'linux-2.6'Paul Mackerras1-1/+1
2007-05-09[POWERPC] User rheap from arch/powerpc/libKumar Gala1-89/+0
Removed rheap in arch/ppc/lib and changed build system to use the one in arch/powerpc/lib. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09[POWERPC] Change rheap functions to use ulongs instead of pointersTimur Tabi3-28/+18
The rheap allocation functions return a pointer, but the actual value is based on how the heap was initialized, and so it can be anything, e.g. an offset into a buffer. A ulong is a better representation of the value returned by the allocation functions. This patch changes all of the relevant rheap functions to use a unsigned long integers instead of a pointer. In case of an error, the value returned is a negative error code that has been cast to an unsigned long. The caller can use the IS_ERR_VALUE() macro to check for this. All code which calls the rheap functions is updated accordingly. Macros IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE(). Also added error checking to rh_attach_region(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09include files: convert "include" subdirectory to UTF-8John Anthony Kazos Jr1-1/+1
Convert the "include" subdirectory to UTF-8. Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08Remove tas()Jeff Dike1-1/+0
tas() has no users, so get rid of it. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: <linux-arch@vger.kernel.org> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atomic.h: atomic_add_unless as inline. Remove system.h atomic.h circular ↵Mathieu Desnoyers1-1/+0
dependency atomic_add_unless as inline. Remove system.h atomic.h circular dependency. I agree (with Andi Kleen) this typeof is not needed and more error prone. All the original atomic.h code that uses cmpxchg (which includes the atomic_add_unless) uses defines instead of inline functions, probably to circumvent a circular dependency between system.h and atomic.h on powerpc (which my patch addresses). Therefore, it makes sense to use inline functions that will provide type checking. atomic_add_unless as inline. Remove system.h atomic.h circular dependency. Digging into the FRV architecture shows me that it is also affected by such a circular dependency. Here is the diff applying this against the rest of my atomic.h patches. It applies over the atomic.h standardization patches. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Clean up mostly unused IOSPACE macrosDavid Gibson1-4/+0
Most architectures defined three macros, MK_IOSPACE_PFN(), GET_IOSPACE() and GET_PFN() in pgtable.h. However, the only callers of any of these macros are in Sparc specific code, either in arch/sparc, arch/sparc64 or drivers/sbus. This patch removes the redundant macros from all architectures except sparc and sparc64. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08move die notifier handling to common codeChristoph Hellwig1-0/+1
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02[PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destructionJeremy Fitzhardinge1-0/+1
Add hooks to allow a paravirt implementation to track the lifetime of an mm. Paravirtualization requires three hooks, but only two are needed in common code. They are: arch_dup_mmap, which is called when a new mmap is created at fork arch_exit_mmap, which is called when the last process reference to an mm is dropped, which typically happens on exit and exec. The third hook is activate_mm, which is called from the arch-specific activate_mm() macro/function, and so doesn't need stub versions for other architectures. It's called when an mm is first used. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: linux-arch@vger.kernel.org Cc: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2007-04-30[POWERPC] Stop using ppc_sys for Xilinx Virtex boardsGrant Likely1-2/+0
The arch/ppc/syslib/ppc_sys.c infrastructure does not work well for the virtex ports. Move the ml300 and ml403 board ports over to use the new virtex_devices infrastructure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Merge common virtex header filesGrant Likely1-6/+2
The header files for the ml403 and ml300 are virtually identical, merge them into a single file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_propertyStephen Rothwell1-1/+2
This is more consistent and gets us closer to the Sparc code. We add a get_property define for compatibility during the change over. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13[POWERPC] ppc: Add support for AMCC Taishan 440GX eval boardStefan Roese1-0/+4
This patch adds support for the AMCC Taishan PPC440GX evaluation board. This is still an arch/ppc port. I'm aware that the move of 4xx to arch/powerpc is making good progress right now. So this patch is mainly intended to make the Taishan support available for the community right now. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-09[PATCH] kill eth_io_copy_and_sum()Al Viro1-2/+0
On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len). The function name is highly misguiding (it _never_ does any checksums), the last argument is just a noise and simply expanding the call to memcpy_fromio() gives shorter and more readable source. For a lot of reasons it has almost no remaining users, so it's better to just outright kill it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07[POWERPC] Compile fixes for arch/powerpc dcr codeDavid Gibson2-2/+1
The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] 8xx: powerpc port of core CPM PICVitaly Bordug1-0/+1
This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24[POWERPC] Remove the broken Gemini supportAdrian Bunk2-79/+0
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11Merge branch 'for_paulus' of ↵Paul Mackerras1-34/+2
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2006-12-10[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is setKumar Gala1-34/+2
On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08[POWERPC] Fix mmap of PCI resource with hack for XBenjamin Herrenschmidt1-4/+4
The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Define pci_unmap_addr() et al. when CONFIG_NOT_COHERENT_CACHE=yRoland Dreier1-0/+23
The current PowerPC code makes pci_unmap_addr(), pci_unmap_addr_set(), and friends trivial for all 32-bit kernels. This is reasonable, since for those kernels it is true that pci_unmap_single() does not need the DMA address from the original DMA mapping -- in fact, it is a NOP. However, I recently tried the tg3 driver on a PowerPC 440SPe machine, which runs a 32-bit kernel and has non-cache-coherent PCI DMA. I found that the tg3 driver crashed in pci_dma_sync_single_for_cpu(), since for non-coherent systems, that function must invalidate the cache for the DMA address range requested, and therefore it does use the address passed in. tg3 uses a DMA address it stashes away with pci_unmap_addr_set() and retrieves with pci_unmap_addr(). Of course, since pci_unmap_addr() is defined to (0) right now, this doesn't work. It seems to me that the tg3 driver is using pci_unmap_addr() in a legitimate way -- I wouldn't want to have to teach all drivers that they should use pci_unmap_addr() if they only need the address for unmapping functions, but if they want the pci_dma_sync functions, then they have to store the DMA address without the helper macros. The right fix therefore seems to be in the definition of the macros in <asm/pci.h> -- we should use the trivial versions only for 32-bit kernels for coherent systems, and the real versions for both 64-bit kernels and non-coherent systems. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-07[PATCH] mm: pagefault_{disable,enable}()Peter Zijlstra1-5/+3
Introduce pagefault_{disable,enable}() and use these where previously we did manual preempt increments/decrements to make the pagefault handler do the atomic thing. Currently they still rely on the increased preempt count, but do not rely on the disabled preemption, this might go away in the future. (NOTE: the extra barrier() in pagefault_disable might fix some holes on machines which have too many registers for their own good) [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[POWERPC] ppc: m48t35 add missing bracketMariusz Kozlowski1-1/+1
Add missing bracket in definition for m48t35 RTC chip. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Fix IDE build with ARCH=ppcBenjamin Herrenschmidt1-0/+8
The recent IO accessor changes broke IDE on arch/ppc due to the IDE stream IO macros using the new reads/writes{b,w,l} accessors that are only defined for arch/powerpc. This adds them to arch/ppc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bitsBenjamin Herrenschmidt1-6/+6
This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add "parent" struct device for PCI host bridgesBenjamin Herrenschmidt1-0/+1
Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04Merge branch 'linux-2.6' into for-linusPaul Mackerras1-0/+7
2006-12-01Driver core: add dev_archdata to struct deviceBenjamin Herrenschmidt1-0/+7
Add arch specific dev_archdata to struct device Adds an arch specific struct dev_arch to struct device. This enables architecture to add specific fields to every device in the system, like DMA operation pointers, NUMA node ID, firmware specific data, etc... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Andi Kleen <ak@suse.de> Acked-By: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>