summaryrefslogtreecommitdiffstats
path: root/include/asm-ppc/io.h
AgeCommit message (Collapse)AuthorFilesLines
2007-02-09[PATCH] kill eth_io_copy_and_sum()Al Viro1-2/+0
On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len). The function name is highly misguiding (it _never_ does any checksums), the last argument is just a noise and simply expanding the call to memcpy_fromio() gives shorter and more readable source. For a lot of reasons it has almost no remaining users, so it's better to just outright kill it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-04[POWERPC] Fix IDE build with ARCH=ppcBenjamin Herrenschmidt1-0/+8
The recent IO accessor changes broke IDE on arch/ppc due to the IDE stream IO macros using the new reads/writes{b,w,l} accessors that are only defined for arch/powerpc. This adds them to arch/ppc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bitsBenjamin Herrenschmidt1-6/+6
This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13[PATCH] ppc: Fix io.h for config with CONFIG_PCI not setSylvain Munaut1-7/+1
When CONFIG_PCI option is not set, the variables pci_dram_offset, isa_io_base and isa_mem_base are not defined. Currently, the test is handled in each platform header. This patch moves the test in io.h once and for all. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-11[PATCH] Consolidate check_signatureMatthew Wilcox1-16/+0
There's nothing arch-specific about check_signature(), so move it to <linux/io.h>. Use a cross between the Alpha and i386 implementations as the generic one. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[POWERPC] convert string i/o operations to CStephen Rothwell1-6/+6
This produces essentially the same code and will make the iSeries i/o consolidation easier. The count parameter is changed to long since that will produce the same (better) code on 32 and 64 bit builds. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20[POWERPC] remove unused asm routinesStephen Rothwell1-4/+0
_insw, _outsw, _insl amd _outsl are all unused, so remove them. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20[POWERPC] remove unused io accessorsStephen Rothwell1-10/+0
The io accessors insw_ns, outsw_ns, insl_ns and outsl_ns are unused (except for one unnecessary use in drivers/net/3c509.c that is addressed in a previous patch) and are only defined in powerpc/ppc, so remove them. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-13[POWERPC] Fix MMIO ops to provide expected barrier behaviourPaul Mackerras1-9/+11
This changes the writeX family of functions to have a sync instruction before the MMIO store rather than after, because the generally expected behaviour is that the device receiving the MMIO store can be guaranteed to see the effects of any preceding writes to normal memory. To preserve ordering between writeX and readX, and to preserve ordering between preceding stores and the readX, the readX family of functions have had an sync added before the load. Although writeX followed by spin_unlock is not officially guaranteed to keep the writeX inside the spin-locked region unless an mmiowb() is used, there are currently drivers that depend on the previous behaviour on powerpc, which was that the mmiowb wasn't actually required. Therefore we have a per-cpu flag that is set by writeX, cleared by __raw_spin_lock and mmiowb, and tested by __raw_spin_unlock. If it is set, __raw_spin_unlock does a sync and clears it. This changes both 32-bit and 64-bit readX/writeX. 32-bit already has a sync in __raw_spin_unlock (since lwsync doesn't exist on 32-bit), and thus doesn't need the per-cpu flag. Tested on G5 (PPC970) and POWER5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-01-20[PATCH] ppc32 8xx: Added setbitsXX/clrbitsXX macro for read-modify-write ↵Vitaly Bordug1-0/+7
operations This adds setbitsXX/clrbitsXX macro for read-modify-write operations and converts the 8xx core and drivers to use them. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-06[PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCISylvain Munaut1-0/+2
Some custom cards might not need PCI, without this patch, compilation fails. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-19ppc32: move some dma routinesStephen Rothwell1-0/+17
Every other architecture define dma_cache_{inv,wback,wback_inv} in asm/io.h and doing so brings us closer to ppc64. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-07[PATCH] ppc32: handle access to non-present IO ports on 8xxMarcelo Tosatti1-5/+7
This adds exception table entries for I/O instructions on and changes MachineCheckException() slightly to cover 8xx specifics (on 8xx the MCE can be generated while executing the IO access instruction itself, which is not the case on PowerMac's, as the comment on traps.c details). Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12Merge from Linus' treePaul Mackerras1-10/+10
2005-09-30[PATCH] missing qualifiers in readb() et.al. on ppcAl Viro1-10/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-25[PATCH] powerpc: merge atomic.h, memory.hBecky Bruce1-10/+1
powerpc: Merge atomic.h and memory.h into powerpc Merged atomic.h into include/powerpc. Moved asm-style HMT_ defines from memory.h into ppc_asm.h, where there were already HMT_defines; moved c-style HMT_ defines to processor.h. Renamed memory.h to synch.h to better reflect its contents. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Jon Loeliger <linuxppc@jdl.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+566
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!