summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/system.h
AgeCommit message (Collapse)AuthorFilesLines
2006-11-01[POWERPC] Fix rmb() for e500-based machines itAndy Fleming1-3/+3
The e500 core generates an illegal instruction exception when it tries to execute the lwsync instruction, which we currently use for rmb(). This fixes it by using the LWSYNC macro, which turns into a plain sync on 32-bit machines. Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04[POWERPC] Cleanup include/asm-powerpc/xmon.hMichael Ellerman1-4/+0
For some reason we have two prototypes for xmon_init(), remove the one in system.h. No one calls xmon() anymore, debugger() is preferable, so we don't need the prototype. And similarly no one calls xmon_printf(). Also update the include guards on xmon.h to match the standard format, add copyright and license, and add comments to #endifs. Built for pseries_defconfig and pmac32_defconfig. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-25Merge branch 'merge'Paul Mackerras1-0/+9
2006-08-23[POWERPC] Fix gettimeofday inaccuraciesNathan Lynch1-0/+9
There are two problems in the powerpc gettimeofday code which can cause incorrect results to be returned. The first is that there is a race between do_gettimeofday and the timer interrupt: 1. do_gettimeofday does get_tb() 2. decrementer exception on boot cpu which runs timer_recalc_offset, which also samples the timebase and updates the do_gtod structure with a greater timebase value. 3. do_gettimeofday calls __do_gettimeofday, which leads to the negative result from tb_val - temp_varp->tb_orig_stamp. The second is caused by taking the boot cpu offline, which can cause the value of tb_last_jiffy to be increased past the currently available timebase, causing the same underflow as above. [paulus@samba.org - define and use data_barrier() instead of mb().] Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-01Merge branch 'merge'Paul Mackerras1-9/+8
2006-07-14[PATCH] remove set_wmb - arch removalSteven Rostedt1-1/+0
set_wmb should not be used in the kernel because it just confuses the code more and has no benefit. Since it is not currently used in the kernel this patch removes it so that new code does not include it. All archs define set_wmb(var, value) to do { var = value; wmb(); } while(0) except ia64 and sparc which use a mb() instead. But this is still moot since it is not used anyway. Hasn't been tested on any archs but x86 and x86_64 (and only compiled tested) Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13[POWERPC] iseries: Move e2a()/strne2a() into their only callerMichael Ellerman1-5/+0
The ASCII -> EBCDIC functions, e2a() and strne2a() are now only used in dt.c, so move them in there. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-08power: improve inline asm memory constraintsLinus Torvalds1-8/+8
Use "+m" rather than a combination of "=m" and "m" for improved clarity and consistency. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[NET]: Allow skb headroom to be overriddenAnton Blanchard1-1/+4
Previously we added NET_IP_ALIGN so an architecture can override the padding done to align headers. The next step is to allow the skb headroom to be overridden. We currently always reserve 16 bytes to grow into, meaning all DMAs start 16 bytes into a cacheline. On ppc64 we really want DMA writes to start on a cacheline boundary, so we increase that headroom to one cacheline. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCIIMichael Ellerman1-0/+2
Add strne2a() which converts a string from EBCDIC to ASCII. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24powerpc: Implement accurate task and CPU time accountingPaul Mackerras1-0/+4
This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13[PATCH] powerpc: use lwsync in atomics, bitops, lock functionsAnton Blanchard1-4/+4
eieio is only a store - store ordering. When used to order an unlock operation loads may leak out of the critical region. This is potentially buggy, one example is if a user wants to atomically read a couple of values. We can solve this with an lwsync which orders everything except store - load. I removed the (now unused) EIEIO_ON_SMP macros and the c versions isync_on_smp and eieio_on_smp now we dont use them. I also removed some old comments that were used to identify inline spinlocks in assembly, they dont make sense now our locks are out of line. Another interesting thing was that read_unlock was using an eieio even though the rest of the spinlock code had already been converted to use lwsync. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds1-0/+8
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's gone, gone, gone). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] sched: add cacheflush() asmIngo Molnar1-0/+10
Add per-arch sched_cacheflush() which is a write-back cacheflush used by the migration-cost calibration code at bootup time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] powerpc: Avoid potential FP corruption with preempt and UPPaul Mackerras1-0/+8
Heikki Lindholm pointed out that there was a potential race with the lazy CPU state (FP, VR, EVR) stuff if preempt is enabled. The race is that in the process of restoring FP state on sigreturn, the task gets preempted by a user task that wants to use the FPU. It will take an FP unavailable exception, which will write the current FPU state to the thread_struct, overwriting the values which sigreturn has stored. Note that this can only happen on UP since we don't implement lazy CPU state on SMP. The fix is to flush the lazy CPU state before updating the thread_struct. To do this we re-use the flush_lazy_cpu_state() function from process.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: sanitize header files for user space includesArnd Bergmann1-2/+1
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10powerpc: Move some extern declarations from C code into headersPaul Mackerras1-0/+1
This also make klimit have the same type on 32-bit as on 64-bit, namely unsigned long, and defines and initializes it in one place. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Consolidate asm compatibility macrosDavid Gibson1-1/+0
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-06[PATCH] ppc64: support 64k pagesBenjamin Herrenschmidt1-1/+1
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-03powerpc: Add helper functions for synthesising instructions at runtimeMichael Ellerman1-0/+48
There's a few places already, and soon will be more, where we synthesise branch instructions at runtime. Rather than doing it by hand in each case, it would make sense to have one implementation. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-10-31powerpc: Fix bug arising from having multiple memory_limit variablesPaul Mackerras1-0/+1
We had a static memory_limit in prom.c, and then another one defined in setup_64.c and used in numa.c, which resulted in the kernel crashing when mem=xxx was given on the command line. This puts the declaration in system.h and the definition in mem.c. This also moves the definition of tce_alloc_start/end out of setup_64.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Fix handling of fpscr on 64-bitDavid Gibson1-2/+2
The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc/ppc/ppc64: Various compile fixes.Paul Mackerras1-0/+2
This declares powersave_nap in system.h and makes it an int everywhere, fixes typos for the maple platform, fixes a couple of places where I missed removing the last two arguments from a message_pass function, and makes ppc64 consistent with ppc32 in the type of the pci_bridge.cfg_data field. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Get 64-bit configs to compile with ARCH=powerpcPaul Mackerras1-0/+3
This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06powerpc: Merge in the ppc64 version of the prom code.Paul Mackerras1-0/+5
This brings in the ppc64 version of prom_init.c, prom.c and btext.c and makes them work for ppc32. This also brings in the new calling convention, where the first entry to the kernel (with r5 != 0) goes to the prom_init code, which then restarts from the beginning (with r5 == 0) after it has done its stuff. For now this also brings in the ppc32 version of setup.c. It also merges lmb.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-01powerpc: make iSeries buildStephen Rothwell1-1/+3
Merge vmlinux.lds.S. Also remove arch/powerpc/kernel/vmlinux.lds which is a generated file. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27powerpc: clean up after powermac build mergeStephen Rothwell1-3/+3
Complete moving arch/ppc64/kernel/mpic.h, include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h and include/asm-ppc64/kprobes.h Add arch/powerpc/platforms/Makefile and use it from arch/powerpc/Makefile Introduce OLDARCH temporarily so we can point back to the originating architecture Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-26powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras1-0/+350
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>