summaryrefslogtreecommitdiffstats
path: root/include/asm-mips/hazards.h
AgeCommit message (Collapse)AuthorFilesLines
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle1-271/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] R1: Fix hazard barriers to make kernels work on R2 also.Ralf Baechle1-1/+53
Tested with Malta; inflates malta_defconfig by 3932 bytes. Ideally there should be additional configuration to allow getting rid of this overhead but that would be too much complexity at this stage of the release cycle. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] checkfiles: Fix "need space after that ','" errors.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-10[MIPS] Provide empty irq_enable_hazard definition for legacy and R1 cores.Ralf Baechle1-0/+1
Following a strict interpretation the empty definition of irq_enable_hazard has always been a bug - but an intentional one because it didn't bite. This has now changed, for uniprocessor kernels mm/slab.c:do_drain() [...] on_each_cpu(do_drain, cachep, 1, 1); check_irq_on(); [...] may be compiled into a mtc0 c0_status; mfc0 c0_status sequence resulting in a back-to-back hazard. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Add missing declaration for mips_ihb().Ralf Baechle1-1/+6
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11[MIPS] SB1: Build fix.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11[MIPS] FPU hazard handlingChris Dearman1-0/+32
Move FPU hazard handling to hazards.h and provide proper support for MIPSR2 processors Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-24[MIPS] Fix pipeline hazard.Ralf Baechle1-0/+1
In the the sequence: ei .. mfc0 $x, $status the mfc0 may not see the SR_IE bit set. This was a deliberate bug in the kernel code because we knew this was a safe thing to do on all R2 silicon so far but new silicon is changing this. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-24[MIPS] vr41xx: need one more nop with mtc0_tlbw_hazard()Yoichi Yuasa1-1/+1
NEC VR4111 and VR4121 need one more nop with mtc0_tlbw_hazard(). Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] s/__ASSEMBLER__/__ASSEMBLY__/ for clarity sake.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Cleanup hazard handling.Ralf Baechle1-236/+126
Mostly based on patch by Chris Dearman and cleanups from Yoichi. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29[MIPS] Add missing backslashes to macro definitions.Ralf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-19[MIPS] MT: Improved multithreading support.Ralf Baechle1-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] SB1: Fix interrupt disable hazard.Ralf Baechle1-77/+103
The SB1 core has a three cycle interrupt disable hazard but we were wrongly treating it as fully interlocked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix C version of ssnop to use the right opcode.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10MIPS: R2: Try to bulletproof instruction_hazard against miss-compilation.Ralf Baechle1-5/+15
Gcc has a tradition of misscompiling the previous construct using the address of a label as argument to inline assembler. Gas otoh has the annoying difference between la and dla which are only usable for 32-bit rsp. 64-bit code, so can't be used without conditional compilation. The alterantive is switching the assembler to 64-bit code which happens to work right even for 32-bit code ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Fixup a few lose ends in explicit support for MIPS R1/R2.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Use R4000 TLB routines for SB1 also.Ralf Baechle1-2/+4
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Cleanups.Ralf Baechle1-10/+12
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29MIPS R2 instruction hazard handling.Ralf Baechle1-0/+16
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29One definition of back_to_back_c0_hazard too much.Ralf Baechle1-6/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29New hazard handling function back_to_back_c0_hazard() to handle back toRalf Baechle1-0/+21
back mtc0 / mfc0 pairs from the same coprocessor register. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+217
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 08:36:14 +0000