summaryrefslogtreecommitdiffstats
path: root/include/acpi
AgeCommit message (Collapse)AuthorFilesLines
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-23Merge tag 'acpi-4.20-rc1' of ↵Linus Torvalds3-14/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These fix ACPICA issues related to the handling of module-level AML, fix an ordering issue during ACPI initialization, update ACPICA to upstream revision 20181003 (including fixes mostly), fix issues with system-wide suspend/resume related to the ACPI driver for Intel SoCs (LPSS), fix device enumeration issues on boards with Dollar Cove or Whiskey Cove Intel PMICs, prevent ACPICA from calling ktime_get() in unsuitable conditions, update a few drivers and clean up some code in several places. Specifics: - Fix ACPICA issues related to the handling of module-level AML and make the ACPI initialization code parse ECDT before loading the definition block tables (Erik Schmauss). - Update ACPICA to upstream revision 20181003 including fixes related to the ill-defined "generic serial bus" and the handling of the _REG object (Bob Moore). - Fix some issues with system-wide suspend/resume on Intel BYT/CHT related to the handling of I2C controllers in the ACPI LPSS driver for Intel SoCs (Hans de Goede). - Modify the ACPI namespace scanning code to enumerate INT33FE HID devices as platform devices with I2C resources to avoid device enumeration problems on boards with Dollar Cove or Whiskey Cove Intel PMICs (Hans de Goede). - Prevent ACPICA from using ktime_get() during early resume from system-wide suspend before resuming the timekeeping which generally is unsafe and triggers a warning from the timekeeping code (Bart Van Assche). - Add low-level real time clock support to the ACPI Time and Aalarm Device (TAD) driver (Rafael Wysocki). - Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and Oopses when removing modules (Ronald Tschalär). - Fix the ACPI PPTT parsing code to handle architecturally unknown cache types properly (Jeffrey Hugo). - Fix initialization issue in the ACPI processor driver (Dou Liyang). - Clean up the code in several places (Andy Shevchenko, Bartlomiej Zolnierkiewicz, David Arcari, zhong jiang)" * tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (33 commits) ACPI / scan: Create platform device for INT33FE ACPI nodes ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer() ACPI: probe ECDT before loading AML tables regardless of module-level code flag ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes ACPICA: AML interpreter: add region addresses in global list during initialization ACPI: TAD: Add low-level support for real time capability ACPI: remove redundant 'default n' from Kconfig ACPI / SBS: Fix rare oops when removing modules ACPI / SBS: Fix GPE storm on recent MacBookPro's ACPI/PPTT: Handle architecturally unknown cache types drivers: base: cacheinfo: Do not populate sysfs for unknown cache types ACPICA: Update version to 20181003 ACPICA: Never run _REG on system_memory and system_IO ACPICA: Split large interpreter file ACPICA: Update for field unit access ACPICA: Rename some of the Field Attribute defines ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol ACPI / processor: Fix the return value of acpi_processor_ids_walk() ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq ...
2018-10-23Merge tag 'pm-4.20-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These make hibernation on 32-bit x86 systems work in all of the cases in which it works on 64-bit x86 ones, update the menu cpuidle governor and the "polling" state to make them more efficient, add more hardware support to cpufreq drivers and fix issues with some of them, fix a bug in the conservative cpufreq governor, fix the operating performance points (OPP) framework and make it more stable, update the devfreq subsystem to take changes in the APIs used by into account and clean up some things all over. Specifics: - Backport hibernation bug fixes from x86-64 to x86-32 and consolidate hibernation handling on x86 to allow 32-bit systems to work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen Yu). - Fix hibernation documentation (Vladimir D. Seleznev). - Update the menu cpuidle governor to fix a couple of issues with it, make it more efficient in some cases and clean it up (Rafael Wysocki). - Rework the cpuidle polling state implementation to make it more efficient (Rafael Wysocki). - Clean up the cpuidle core somewhat (Fieah Lim). - Fix the cpufreq conservative governor to take policy limits into account properly in some cases (Rafael Wysocki). - Add support for retrieving guaranteed performance information to the ACPI CPPC library and make the intel_pstate driver use it to expose the CPU base frequency via sysfs on systems with the hardware-managed P-states (HWP) feature enabled (Srinivas Pandruvada). - Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor). - Get rid of device_node.name printing from cpufreq (Rob Herring). - Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa). - Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju Das). - Update the dt-platdev cpufreq driver to allow RK3399 to have separate tunables per cluster (Dmitry Torokhov). - Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver (Christoph Hellwig). - Make the imx6q cpufreq driver read OCOTP through nvmem for imx6ul/imx6ull (Anson Huang). - Fix several bugs in the operating performance points (OPP) framework and make it more stable (Viresh Kumar, Dave Gerlach). - Update the devfreq subsystem to take changes in the APIs used by into account, fix some issues with it and make it stop print device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra, Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang). - Prepare the generic power domains (genpd) framework for dealing with domains containing CPUs (Ulf Hansson). - Prevent sysfs attributes representing low-power S0 residency counters from being exposed if low-power S0 support is not indicated in ACPI FADT (Rajneesh Bhardwaj). - Get rid of custom CPU features macros for Intel CPUs from the intel_idle and RAPL drivers (Andy Shevchenko). - Update the tasks freezer to list tasks that refused to freeze and caused a system transition to a sleep state to be aborted (Todd Brandt). - Update the pm-graph set of tools to v5.2 (Todd Brandt). - Fix some issues in the cpupower utility (Anders Roxell, Prarit Bhargava)" * tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits) PM / Domains: Document flags for genpd PM / Domains: Deal with multiple states but no governor in genpd PM / Domains: Don't treat zero found compatible idle states as an error cpuidle: menu: Avoid computations when result will be discarded cpuidle: menu: Drop redundant comparison cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent() cpufreq: conservative: Take limits changes into account properly Documentation: intel_pstate: Add base_frequency information cpufreq: intel_pstate: Add base_frequency attribute ACPI / CPPC: Add support for guaranteed performance cpuidle: menu: Simplify checks related to the polling state PM / tools: sleepgraph and bootgraph: upgrade to v5.2 PM / tools: sleepgraph: first batch of v5.2 changes cpupower: Fix coredump on VMWare cpupower: Fix AMD Family 0x17 msr_pstate size cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster cpuidle: poll_state: Revise loop termination condition cpuidle: menu: Move the latency_req == 0 special case check cpuidle: menu: Avoid computations for very close timers ...
2018-10-18ACPICA: Remove acpi_gbl_group_module_level_code and only use ↵Erik Schmauss1-7/+0
acpi_gbl_execute_tables_as_methods instead acpi_gbl_group_module_level_code and acpi_gbl_execute_tables_as_methods were used to enable different table load behavior. The different table load behaviors are as follows: A.) acpi_gbl_group_module_level_code enabled the legacy approach where ASL if statements are executed after the namespace object has been loaded. B.) acpi_gbl_execute_tables_as_methods is currently used to enable the table load to be a method invocation. This meaning that ASL If statements are executed in-line rather than deferred until after the ACPI namespace has been populated. This is the correct behavior and option A will be removed in the future. We do not support a table load behavior where these variables are assigned the same value. In otherwords, we only support option A or B and do not need acpi_gbl_group_module_level_code to enable A. From now on, acpi_gbl_execute_tables_as_methods == 0 enables option A and acpi_gbl_execute_tables_as_methods == 1 enables option B. Note: option A is expected to be removed in the future and option B will become the only supported table load behavior. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-16ACPI / CPPC: Add support for guaranteed performanceSrinivas Pandruvada1-0/+1
The Continuous Performance Control package may contain an optional guaranteed performance field. Add support to read guaranteed performance from _CPC. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04ACPICA: Update version to 20181003Bob Moore1-1/+1
Version 20181003 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04ACPICA: Update for field unit accessBob Moore1-5/+13
Mostly for access to Generic Serial Bus, but also cleanup for the other fields. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocolBob Moore2-3/+9
Cleanup for this write-then-read protocol. The ACPI specification is rather unclear for the entire generic_serial_bus, but this change works correctly on the Surface 3. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02ACPI / property: Allow multiple property compatible _DSD entriesMika Westerberg1-1/+7
It is possible to have _DSD entries where the data is compatible with device properties format but are using different GUID for various reasons. In addition to that there can be many such _DSD entries for a single device such as for PCIe root port used to host a Thunderbolt hierarchy: Scope (\_SB.PCI0.RP21) { Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () {"ExternalFacingPort", 1}, Package () {"UID", 0 } } }) } More information about these new _DSD entries can be found in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports To make these available for drivers via unified device property APIs, modify ACPI property core so that it supports multiple _DSD entries organized in a linked list. We also store GUID of each _DSD entry in struct acpi_device_properties in case there is need to differentiate between entries. The supported GUIDs are then listed in prp_guids array. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2018-09-08dma-mapping: remove dma_deconfigureChristoph Hellwig1-1/+0
This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-08-14ACPICA: Update version to 20180810Bob Moore1-1/+1
Version 20180810. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Reference Counts: increase max to 0x4000 for large serversErik Schmauss1-1/+1
Increase the reference count limit to 0x4000 as the current one is not sufficient for some large server systems. Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com> Tested-by: Russ Anderson <russ.anderson@hpe.com> Reported-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML ↵Erik Schmauss1-0/+6
during table load Macros to classify different AML exception codes have been added in order to ignore the exceptions, Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Fix damaged white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14Merge branches 'acpi-x86', 'acpi-bus', 'acpi-ec' and 'acpi-apei'Rafael J. Wysocki1-0/+4
Merge ACPI x86-specific changes, core updates, EC driver updates and APEI support updates for 4.19. These add a special platform driver for handling multiple I2C devices hooked up to the same device object in the ACPI tables, add some new quirks and remove one that is not needed any more. * acpi-x86: platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / x86: enable touchscreen on Dell Venue Pro 7139 * acpi-bus: ACPI: bus: Fix a pointer coding style issue Revert "ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530" * acpi-ec: ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd * acpi-apei: arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
2018-08-09arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()Dongjiu Geng1-0/+4
In order to remove the additional check before calling the ghes_notify_sea(), make stub definition when !CONFIG_ACPI_APEI_SEA. After this cleanup, we can simply call the ghes_notify_sea() to let APEI driver handle the SEA notification. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-09ACPICA: Update version to 20180629Bob Moore1-1/+1
Version 20180629. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-20ACPI / processor: Finish making acpi_processor_ppc_has_changed() voidBrian Norris1-2/+1
Commit bca5f557dcea "ACPI / processor: Make acpi_processor_ppc_has_changed() void" changed one of the declarations of acpi_processor_ppc_has_changed() to return void, but the !CPU_FREQ version still returns int. Let's return void to be consistent. Fixes: bca5f557dcea "ACPI / processor: Make acpi_processor_ppc_has_changed() void" Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-13Merge tag 'acpi-4.18-rc1-2' of ↵Linus Torvalds4-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20180531 including one important AML parser fix and updates related to the IORT table, make the kernel recognize the "Windows 2017.2" _OSI string and update the customized methods documentation. Specifics: - Update the ACPICA code in the kernel to upstream revision 20180531 including: * AML parser fix to continue loading tables after detecting an AML error (Erik Schmauss). * AML parser debug option to dump parse trees (Bob Moore). * Debugger updates (Bob Moore). * Initial bits of Unload () operator deprecation (Bob Moore). * Updates related to the IORT table (Robin Murphy). - Make Linux respond to the "Windows 2017.2" _OSI string which allows native Thunderbolt enumeration to be used on Dell systems and was unsafe before recent changes in the PCI subsystem (Mario Limonciello) - Update the ACPI method customization feature documentation (Erik Schmauss)" * tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Recognize the _OSI string "Windows 2017.2" ACPICA: Update version to 20180531 ACPICA: Interpreter: Begin deprecation of Unload operator ACPICA: AML parser: attempt to continue loading table after error ACPICA: Debugger: Reduce verbosity for module-level code errors. ACPICA: AML Parser: Add debug option to dump parse trees ACPICA: Debugger: Add count of namespace nodes after namespace dump ACPICA: IORT: Add PMCG node supprt ACPICA: IORT: Update for revision D ACPI / Documentation: update ACPI customize method feature docs
2018-06-10ACPICA: Recognize the _OSI string "Windows 2017.2"Mario Limonciello1-0/+1
Dell uses this string to activate Thunderbolt native mode on supported machines. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06Merge tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-4/+3
Pull EDAC updates from Borislav Petkov: - Stratix10 SDRAM support to altera_edac (Thor Thayer) - the usual misc fixes all over the place [ Also, shared branch for socfpga_stratix10.dtsi file changes with the socfpga tree ] * tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ghes: Make platform-based whitelisting x86-only EDAC, altera: Fix ARM64 build warning EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m EDAC, ghes: Use BIT() macro EDAC, ghes: Add DDR4 and NVDIMM memory types EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10 Documentation: dt: edac: Move Altera SOCFPGA EDAC file EDAC, altera: Add support for Stratix10 SDRAM EDAC Documentation: dt: socfpga: Add Stratix10 ECC Manager binding EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error() arm64: dts: stratix10: add sdram ecc EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy" EDAC, ghes: Add a null pointer check in ghes_edac_unregister() ghes, EDAC: Fix ghes_edac registration arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5 arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts arm64: dts: stratix10: enable i2c, add i2c periperals arm64: dts: stratix10: use clock bindings for the Stratix10 platform
2018-06-06ACPICA: Update version to 20180531Bob Moore1-1/+1
Version 20180531. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06ACPICA: AML Parser: Add debug option to dump parse treesBob Moore1-1/+3
Debug level 0x00800000 will dump the current parse tree just before it is deleted. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06ACPICA: IORT: Add PMCG node supprtRobin Murphy1-1/+9
PMCG nodes were added by IORT revision C, with the unfortunate oversight that it only defined a single base address, and thus was incapable of properly describing PMCG implementations with PMCG_CFGR.RELOC_CTRS = 1, where the counters are in a separate page from the control registers. Revision D corrects this by clarifying the existing field as the page 0 base address and adding a second field to describe the page 1 address when implemented. With the spec now fit for purpose, let's support it. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06ACPICA: IORT: Update for revision DRobin Murphy1-5/+10
IORT revision D contains a few additions and fixes to currently-supported tables: - SMMUv3 proximity domain field is enlarged to 4 bytes for consistency with SRAT - Root complex nodes gain an address size limit field equivalent to that of named components - Named component nodes gain a way to describe PASID (substream_ID) support, encoded in their flags Additionally, we fix a couple of outstanding points in passing: - Add the stall support flag for named components defined in revision C - Fix SMMUv3 HTTU override mask, which should always have been 2 bits Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-05Merge tag 'acpi-4.18-rc1' of ↵Linus Torvalds7-7/+76
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the 20180508 upstream revision and make it support the RT patch, add CPPC v3 support to the ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes with the RTC, add quirks to the ACPI AC and battery drivers, and update the ACPI SoC drivers. Specifics: - Update the ACPICA code in the kernel to the 20180508 upstream revision including: * iASL -tc option enhancement (Bob Moore). * Debugger improvements (Bob Moore). * Support for tables larger than 1 MB in acpidump/acpixtract (Bob Moore). * Minor fixes and cleanups (Colin Ian King, Toomas Soome). - Make the ACPICA code in the kernel support the RT patch (Sebastian Andrzej Siewior, Steven Rostedt). - Add a kmemleak annotation to the ACPICA code (Larry Finger). - Add CPPC v3 support to the ACPI CPPC library and fix two issues related to CPPC (Prashanth Prakash, Al Stone). - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems where WDAT clashes with the RTC SRAM (Mika Westerberg). - Add some quirks to the ACPI AC and battery drivers (Carlo Caione, Hans de Goede). - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD) platforms (Akshu Agrawal, Hans de Goede). - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu Malaterre)" * tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPICA: Update version to 20180508 ACPICA: acpidump/acpixtract: Support for tables larger than 1MB ACPI: APD: Add AMD misc clock handler support clk: x86: Add ST oscout platform clock ACPICA: Update version to 20180427 ACPICA: Debugger: Removed direct support for EC address space in "Test Objects" ACPICA: Debugger: Add Package support for "test objects" command ACPICA: Improve error messages for the namespace root node ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list ACPICA: vsnprintf: this statement may fall through ACPICA: Tables: Fix spelling mistake in comment ACPICA: iASL: Enhance the -tc option (create AML hex file in C) ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI / tables: improve comments regarding acpi_parse_entries_array() ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock ACPICA: provide abstraction for raw_spinlock_t ACPI / CPPC: Fix invalid PCC channel status errors ...
2018-06-04Merge branches 'acpi-cppc', 'acpi-misc', 'acpi-battery' and 'acpi-ac'Rafael J. Wysocki1-4/+10
* acpi-cppc: mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPI / CPPC: Fix invalid PCC channel status errors ACPI / CPPC: Document CPPC sysfs interface cpufreq / CPPC: Support for CPPC v3 ACPI / CPPC: Check for valid PCC subspace only if PCC is used ACPI / CPPC: Add support for CPPC v3 * acpi-misc: ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI: add missing newline to printk * acpi-battery: ACPI / battery: Add quirk to avoid checking for PMIC with native driver ACPI / battery: Ignore AC state in handle_discharging on systems where it is broken ACPI / battery: Add handling for devices which wrongly report discharging state ACPI / battery: Remove initializer for unused ident dmi_system_id ACPI / AC: Remove initializer for unused ident dmi_system_id * acpi-ac: ACPI / AC: Add quirk to avoid checking for PMIC with native driver
2018-05-25ACPICA: Introduce acpi_dispatch_gpe()Rafael J. Wysocki1-0/+1
Introduce acpi_dispatch_gpe() as a wrapper around acpi_ev_detect_gpe() for checking if the given GPE (as represented by a GPE device handle and a GPE number) is currently active and dispatching it (if that's the case) outside of interrupt context. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-18ACPICA: Update version to 20180508Bob Moore1-1/+1
Version 20180508. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15ACPICA: Update version to 20180427Bob Moore1-1/+1
Version 20180427. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15ACPICA: Improve error messages for the namespace root nodeBob Moore1-2/+5
Replace "\___" with actual descriptive text. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-12EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()Alexandru Gagniuc1-3/+2
The use of the @ghes argument was removed in a previous commit, but function signature was not updated to reflect this. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-acpi@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180430213358.8319-1-mr.nuke.me@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-10ACPICA: provide abstraction for raw_spinlock_tSebastian Andrzej Siewior4-0/+60
Provide a new lock type acpi_raw_spinlock which is implemented as raw_spinlock_t on Linux. This type should be used in code which covers small areas of code and disables interrupts only for short time even on a realtime OS. There is a fallback to spinlock_t if an OS does not provide an implementation for acpi_raw_spinlock. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-02ghes, EDAC: Fix ghes_edac registrationBorislav Petkov1-1/+1
Tony reported seeing "Internal error: Can't find EDAC structure" when injecting correctable errors due to the fact that ghes_edac would still load even if the whitelist won't hit. Drop the pr_err() in ghes_edac_report_mem_error() for now due to the hacky way how ghes_edac depends on ghes.c. While at it, make ghes_edac_register() return an error if it doesn't hit in the whitelist as it is the only sensible thing to do in that situation. Furthermore, move the call to it to happen last in ghes_probe() so that GHES initializing properly does not depend on ghes_edac init at all as latter is only reporting errors and not required for GHES's proper functioning. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Tested-by: Sughosh Ganu <sughosh.ganu@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20180420182015.zao3olss4tvvlxki@agluck-desk
2018-04-24ACPI / CPPC: Add support for CPPC v3Prashanth Prakash1-4/+10
CPPC V3 introduces two new entries to make it easier to convert between abstract processor performance and frequency. The two new entries are lowest frequency and nominal frequency. These are the frequencies corresponding to lowest and nominal abstract performance. Add support to read the new entries and populate them as part of the CPPC performance capabilities which can be used by cpufreq drivers Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-12Merge tag 'for-linus-4.17-rc1-tag' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A few fixes of Xen related core code and drivers" * tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen xen/acpi: off by one in read_acpi_id() xen/acpi: upload _PSD info for non Dom0 CPUs too x86/xen: Delay get_cpu_cap until stack canary is established xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END xen: xenbus: Catch closing of non existent transactions xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-05Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+18
Pull EDAC updates from Borislav Petkov: "Noteworthy is the NVDIMM support: - NVDIMM support to EDAC (Tony Luck) - misc fixes" * tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Remove variable length array usage EDAC, skx_edac: Detect non-volatile DIMMs firmware, DMI: Add function to look up a handle and return DIMM size acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle EDAC: Add new memory type for non-volatile DIMMs EDAC: Drop duplicated array of strings for memory type names EDAC, layerscape: Allow building for LS1021A
2018-04-04ACPI / scan: Rename acpi_is_serial_bus_slave() for more general useJohn Garry1-1/+1
Currently the ACPI scan has special handling for serial bus slaves, in that it makes it the responsibility of the slave device's parent to enumerate the device. To support other types of slave devices which require the same special handling but where the bus is not strictly a serial bus, such as devices on the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to acpi_device_enumeration_by_parent(), so that the name can fit the wider purpose. Also rename the associated device flag acpi_device_flags.serial_bus_slave to .enumeration_by_parent. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-02Merge branches 'acpi-battery', 'acpi-doc' and 'acpi-pmic'Rafael J. Wysocki1-0/+21
* acpi-battery: Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk" ACPI: battery: do not export degraded capacity values over 100 ACPI: battery: make function __battery_hook_unregister() static ACPI: battery: Add the ThinkPad "Not Charging" quirk thinkpad_acpi: Add support for battery thresholds power: add to_power_supply macro to the API battery: Add the battery hooking API * acpi-doc: ACPI: sysfs: Update device object sysfs documentation * acpi-pmic: ACPI / PMIC: Replace license boilerplate with SPDX license identifier
2018-03-21xen/acpi: upload _PSD info for non Dom0 CPUs tooJoao Martins1-0/+2
All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and changing only the acpi_id. For processors which P-state coordination type is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information (_PSD), because Xen will ignore any cpufreq domains created for past CPUs. Albeit for platforms which expose coordination types as SW_ANY or SW_ALL, this will have some unintended side effects. Effectively, it will look at the P-state domain existence and *if it already exists* it will skip the acpi-cpufreq initialization and thus inherit the policy from the first CPU in the cpufreq domain. This will finally lead to the original cpu not changing target freq to P0 other than the first in the domain. Which will make turbo boost not getting enabled (e.g. for 'performance' governor) for all cpus. This patch fixes that, by also evaluating _PSD when we enumerate all ACPI processors and thus always uploading the correct info to Xen. We export acpi_processor_get_psd() for that this purpose, but change signature to not assume an existent of acpi_processor given that ACPI isn't creating an acpi_processor for non-dom0 CPUs. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-18ACPICA: Update version to 20180313Bob Moore1-1/+1
Version 20180313. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: Cleanup/simplify module-level code supportBob Moore1-10/+10
This prepares the code for eventual removal of the original style of deferred execution of the MLC. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: adding SPDX headersErik Schmauss22-794/+46
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: Rename a global for clarity, no functional changeBob Moore1-4/+3
Was acpi_gbl_parse_table_as_term_list, changed to: acpi_gbl_execute_tables_as_methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: Change a compile-time option to a runtime optionBob Moore1-0/+10
Changes the option to ignore package resolution errors into a runtime option. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: Remove calling of _STA from acpi_get_object_info()Hans de Goede1-2/+0
As the documentatuon above its declaration indicates, acpi_get_object_info() is intended for early probe usage and as such should not call any methods which may rely on op_regions, before this commit it was also calling _STA, which on some systems does rely on op_regions. Calling _STA before things are ready leads to errors such as these (under Linux, on some hardware): [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [generic_serial_bus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region generic_serial_bus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) End 2015 support for the _SUB method was removed for exactly the same reason. Removing current_status from struct acpi_device_info only has a limited impact. Within ACPICA it is only used by 2 debug messages, both of which are modified to no longer print it with this commit. Outside of ACPICA, there was one user in Linux, which has been patched to no longer use current_status in Torvald's current master. I've not checked if free_BSD or others are using the current_status field. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: Events: Dispatch GPEs after enabling for the first timeErik Schmauss2-0/+2
After being enabled for the first time, the GPEs may have STS bits already set. Setting EN bits is not sufficient to trigger the GPEs again, so this patch polls GPEs after enabling them for the first time. This is a cleaner version on top of the "GPE clear" fix generated according to Mika's report and Rafael's original Linux based fix. Based on Linux commit originated from Rafael J. Wysocki, fixed by Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-14acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handleTony Luck1-0/+18
EDAC driver needs to look up attributes of NVDIMMs provided in SMBIOS. Provide a function that looks up an acpi_nfit_memory_map from a device handle (node/socket/mc/channel/dimm) and returns the SMBIOS handle. Also pass back the "flags" so we can see if the NVDIMM is OK. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Erik Schmauss <erik.schmauss@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Len Brown <lenb@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: devel@acpica.org Cc: linux-acpi@vger.kernel.org Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/20180312182430.10335-4-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-02-21ACPICA: Update version to 20180209Bob Moore1-1/+1
ACPICA commit 6e3468837f9f32f64c7d0a6e20bf0d2579411d43 Version 20180209. Link: https://github.com/acpica/acpica/commit/6e346883 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-21ACPICA: Add option to disable Package object name resolution errorsBob Moore1-0/+1
ACPICA commit a6c3c725c44dd44ad9d3f2b2a64351fdbe6e0014 For the kernel-resident ACPICA, optionally be silent about the NOT_FOUND case. Although this is potentially a serious problem, it can generate a lot of noise/errors on platforms whose firmware carries around a bunch of unused Package objects. To disable these errors, define ACPI_IGNORE_PACKAGE_RESOLUTION_ERRORS in the OS-specific header. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198167 Link: https://github.com/acpica/acpica/commit/a6c3c725 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>