summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2012-06-01Merge branch 'akpm' (Fixups for Andrew's patchbomb)Linus Torvalds13-45/+33
Merge fixups for the mac NLS tables from Andrew. * emailed from Andrew Morton, and one cleanup by me: nls: fix (and rename) mac NLS table files and config options fs/nls/Makefile: remove bogus CONFIG_ assignments
2012-06-01nls: fix (and rename) mac NLS table files and config optionsLinus Torvalds13-33/+33
The config options in the Kconfig file (with _CODEPAGE_ in the name) didn't match the config option name in the Makefile (no _CODEPAGE_). And both of them were of the hard-to-read MACXYZZY variety, which made them hard to parse for normal humans: MACROMAN easily reads as "macro man", not as "Mac Roman". So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's already in the directory name). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01fs/nls/Makefile: remove bogus CONFIG_ assignmentsAndrew Morton1-12/+0
These were debug things which snuck through. Reported-by: Yinghai Lu <yinghai@kernel.org> Cc: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds6-13/+97
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds3-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of signal handling patches from Al Viro: "This time it's mostly helpers and conversions to them; there's a lot of stuff remaining in the tree, but that'll either go in -rc2 (isolated bug fixes, ideally via arch maintainers' trees) or will sit there until the next cycle." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: x86: get rid of calling do_notify_resume() when returning to kernel mode blackfin: check __get_user() return value whack-a-mole with TIF_FREEZE FRV: Optimise the system call exit path in entry.S [ver #2] FRV: Shrink TIF_WORK_MASK [ver #2] FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions new helper: signal_delivered() powerpc: get rid of restore_sigmask() most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set set_restore_sigmask() is never called without SIGPENDING (and never should be) TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set don't call try_to_freeze() from do_signal() pull clearing RESTORE_SIGMASK into block_sigmask() sh64: failure to build sigframe != signal without handler openrisc: tracehook_signal_handler() is supposed to be called on success new helper: sigmask_to_save() new helper: restore_saved_sigmask() new helpers: {clear,test,test_and_clear}_restore_sigmask() HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds89-1081/+1175
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds26-194/+1726
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull Ext4 updates from Theodore Ts'o: "The major new feature added in this update is Darrick J Wong's metadata checksum feature, which adds crc32 checksums to ext4's metadata fields. There is also the usual set of cleanups and bug fixes." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits) ext4: hole-punch use truncate_pagecache_range jbd2: use kmem_cache_zalloc wrapper instead of flag ext4: remove mb_groups before tearing down the buddy_cache ext4: add ext4_mb_unload_buddy in the error path ext4: don't trash state flags in EXT4_IOC_SETFLAGS ext4: let getattr report the right blocks in delalloc+bigalloc ext4: add missing save_error_info() to ext4_error() ext4: add debugging trigger for ext4_error() ext4: protect group inode free counting with group lock ext4: use consistent ssize_t type in ext4_file_write() ext4: fix format flag in ext4_ext_binsearch_idx() ext4: cleanup in ext4_discard_allocated_blocks() ext4: return ENOMEM when mounts fail due to lack of memory ext4: remove redundundant "(char *) bh->b_data" casts ext4: disallow hard-linked directory in ext4_lookup ext4: fix potential integer overflow in alloc_flex_gd() ext4: remove needs_recovery in ext4_mb_init() ext4: force ro mount if ext4_setup_super() fails ext4: fix potential NULL dereference in ext4_free_inodes_counts() ext4/jbd2: add metadata checksumming to the list of supported features ...
2012-06-01HAVE_RESTORE_SIGMASK is defined on all architectures nowAl Viro3-12/+0
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK and picks default set_restore_sigmask() in linux/thread_info.h. Kill the ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones get merged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01nfs: don't open in ->d_revalidateMiklos Szeredi2-55/+78
NFSv4 can't do reliable opens in d_revalidate, since it cannot know whether a mount needs to be followed or not. It does check d_mountpoint() on the dentry, which can result in a weird error if the VFS found that the mount does not in fact need to be followed, e.g.: # mount --bind /mnt/nfs /mnt/nfs-clone # echo something > /mnt/nfs/tmp/bar # echo x > /tmp/file # mount --bind /tmp/file /mnt/nfs-clone/tmp/bar # cat /mnt/nfs/tmp/bar cat: /mnt/nfs/tmp/bar: Not a directory Which should, by any sane filesystem, result in "something" being printed. So instead do the open in f_op->open() and in the unlikely case that the cached dentry turned out to be invalid, drop the dentry and return EOPENSTALE to let the VFS retry. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: retry last component if opening stale dentryMiklos Szeredi1-2/+35
NFS optimizes away d_revalidates for last component of open. This means that open itself can find the dentry stale. This patch allows the filesystem to return EOPENSTALE and the VFS will retry the lookup on just the last component if possible. If the lookup was done using RCU mode, including the last component, then this is not possible since the parent dentry is lost. In this case fall back to non-RCU lookup. Currently this is not used since NFS will always leave RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): don't throw away file on errorMiklos Szeredi1-3/+5
If open fails, don't put the file. This allows it to be reused if open needs to be retried. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): inline __dentry_open()Miklos Szeredi1-2/+18
Copy __dentry_open() into nameidata_to_filp(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_dentry_open(): don't put filpMiklos Szeredi1-1/+2
Move put_filp() out to __dentry_open(), the only caller now. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split __dentry_open()Miklos Szeredi2-14/+34
Split __dentry_open() into two functions: do_dentry_open() - does most of the actual work, doesn't put file on failure open_check_o_direct() - after a successful open, checks direct_IO method This will allow i_op->atomic_open to do just the file initialization and leave the direct_IO checking to the VFS. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last() common post lookupMiklos Szeredi1-31/+3
Now the post lookup code can be shared between O_CREAT and plain opens since they are essentially the same. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): add audit_inode before openMiklos Szeredi1-0/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): only return EISDIR for O_CREATMiklos Szeredi1-1/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): check LOOKUP_DIRECTORYMiklos Szeredi1-0/+3
Check for ENOTDIR before finishing open. This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make ENOENT exit RCU safeMiklos Szeredi1-2/+4
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: make follow_link check RCU safeMiklos Szeredi1-2/+10
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): use inode variableMiklos Szeredi1-3/+5
Use helper variable instead of path->dentry->d_inode before complete_walk(). This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): inline walk_component()Miklos Szeredi1-5/+30
Copy walk_component() into do_lookup(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make exit RCU safeMiklos Szeredi1-1/+1
Allow returning from do_last() with LOOKUP_RCU still set on the "out:" and "exit:" labels. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split do_lookup()Miklos Szeredi1-14/+45
Split do_lookup() into two functions: lookup_fast() - does cached lookup without i_mutex lookup_slow() - does lookup with i_mutex Both follow managed dentries. The new functions are needed by atomic_open. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01Btrfs: move over to use ->update_timeJosef Bacik3-41/+15
Btrfs had been doing it's own file_update_time so we could catch ENOSPC properly, so just update our btrfs_update_time to work with the new stuff and then we'll be fancy later. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01fs: introduce inode operation ->update_timeJosef Bacik7-26/+64
Btrfs has to make sure we have space to allocate new blocks in order to modify the inode, so updating time can fail. We've gotten around this by having our own file_update_time but this is kind of a pain, and Christoph has indicated he would like to make xfs do something different with atime updates. So introduce ->update_time, where we will deal with i_version an a/m/c time updates and indicate which changes need to be made. The normal version just does what it has always done, updates the time and marks the inode dirty, and then filesystems can choose to do something different. I've gone through all of the users of file_update_time and made them check for errors with the exception of the fault code since it's complicated and I wasn't quite sure what to do there, also Jan is going to be pushing the file time updates into page_mkwrite for those who have it so that should satisfy btrfs and make it not a big deal to check the file_update_time() return code in the generic fault path. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds33-866/+2849
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "This includes a fairly large change from Josef around data writeback completion. Before, the writeback wasn't completed until the metadata insertions for the extent were done, and this made for fairly large latency spikes on the last page of each ordered extent. We already had a separate mechanism for tracking pending metadata insertions, so Josef just needed to tweak things a little to end writeback earlier on the page. Overall it makes us much friendly to memory reclaim and lowers latencies quite a lot for synchronous IO. Jan Schmidt has finished some background work required to track btree blocks as they go through changes in ownership. It's the missing piece he needed for both btrfs send/receive and subvolume quotas. Neither of those are ready yet, but the new tracking code is included here. Most of the time, the new code is off. It is only used by scrub and other backref walkers. Stefan Behrens has added io failure tracking. This includes counters for which drives are causing the most trouble so the admin (or an automated tool) can choose to kick them out. We're tracking IO errors, crc errors, and generation checks we do on each metadata block. RAID5/6 did miss the cut this time because I'm having trouble with corruptions. I'll nail it down next week and post as a beta testing before 3.6" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (58 commits) Btrfs: fix tree mod log rewinded level and rewinding of moved keys Btrfs: fix tree mod log del_ptr Btrfs: add tree_mod_dont_log helper Btrfs: add missing spin_lock for insertion into tree mod log Btrfs: add inodes before dropping the extent lock in find_all_leafs Btrfs: use delayed ref sequence numbers for all fs-tree updates Btrfs: fix false positive in check-integrity on unmount Btrfs: fix runtime warning in check-integrity check data mode Btrfs: set ioprio of scrub readahead to idle Btrfs: fix return code in drop_objectid_items Btrfs: check to see if the inode is in the log before fsyncing Btrfs: return value of btrfs_read_buffer is checked correctly Btrfs: read device stats on mount, write modified ones during commit Btrfs: add ioctl to get and reset the device stats Btrfs: add device counters for detected IO and checksum errors btrfs: Drop unused function btrfs_abort_devices() Btrfs: fix the same inode id problem when doing auto defragment Btrfs: fall back to non-inline if we don't have enough space Btrfs: fix how we deal with the orphan block rsv Btrfs: convert the inode bit field to use the actual bit operations ...
2012-06-01Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds14-375/+436
Pull the rest of the nfsd commits from Bruce Fields: "... and then I cherry-picked the remainder of the patches from the head of my previous branch" This is the rest of the original nfsd branch, rebased without the delegation stuff that I thought really needed to be redone. I don't like rebasing things like this in general, but in this situation this was the lesser of two evils. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits) nfsd4: fix, consolidate client_has_state nfsd4: don't remove rebooted client record until confirmation nfsd4: remove some dprintk's and a comment nfsd4: return "real" sequence id in confirmed case nfsd4: fix exchange_id to return confirm flag nfsd4: clarify that renewing expired client is a bug nfsd4: simpler ordering of setclientid_confirm checks nfsd4: setclientid: remove pointless assignment nfsd4: fix error return in non-matching-creds case nfsd4: fix setclientid_confirm same_cred check nfsd4: merge 3 setclientid cases to 2 nfsd4: pull out common code from setclientid cases nfsd4: merge last two setclientid cases nfsd4: setclientid/confirm comment cleanup nfsd4: setclientid remove unnecessary terms from a logical expression nfsd4: move rq_flavor into svc_cred nfsd4: stricter cred comparison for setclientid/exchange_id nfsd4: move principal name into svc_cred nfsd4: allow removing clients not holding state nfsd4: rearrange exchange_id logic to simplify ...
2012-06-01reiserfs: get rid of resierfs_sync_superArtem Bityutskiy3-11/+55
This patch stops reiserfs using the VFS 'write_super()' method along with the s_dirt flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblock using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: mark the superblock as dirty a bit laterArtem Bityutskiy1-2/+1
The 'journal_mark_dirty()' function currently first marks the superblock as dirty by setting 's_dirt' to 1, then does various sanity checks and returns, then actuall does all the magic with the journal. This is not an ideal order, though. It makes more sense to first do all the checks, then do all the internal stuff, and at the end notify the VFS that the superblock is now dirty. This patch moves the 's_dirt = 1' assignment from the very beginning of this function to the very end. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: remove useless superblock dirtyingArtem Bityutskiy1-1/+0
The 'reiserfs_resize()' function marks the superblock as dirty by assigning 1 to 's_dirt' and then calls 'journal_mark_dirty()' which does the same. Thus, we can remove the assignment from 'reiserfs_resize()'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: clean-up function return typeArtem Bityutskiy2-6/+4
Turn 'reiserfs_flush_old_commits()' into a void function because the callers do not cares about what it returns anyway. We are going to remove the 'sb->s_dirt' field completely and this patch is a small step towards this direction. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: cleanup reiserfs_fill_super a bitArtem Bityutskiy1-10/+10
We have the reiserfs superblock pointer in the 'sbi' variable in this function, no need to use the 'REISERFS_SB(s)' macro which is the same. This is jut a small clean-up. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01switch aio and shm to do_mmap_pgoff(), make do_mmap() staticAl Viro1-3/+3
after all, 0 bytes and 0 pages is the same thing... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01ext4: hole-punch use truncate_pagecache_rangeHugh Dickins1-2/+2
When truncating a file, we unmap pages from userspace first, as that's usually more efficient than relying, page by page, on the fallback in truncate_inode_page() - particularly if the file is mapped many times. Do the same when punching a hole: 3.4 added truncate_pagecache_range() to do the unmap and trunc, so use it in ext4_ext_punch_hole(), instead of calling truncate_inode_pages_range() directly. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-06-01jbd2: use kmem_cache_zalloc wrapper instead of flagWanlong Gao1-2/+2
Use kmem_cache_zalloc wrapper instead of flag __GFP_ZERO. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-31ext4: remove mb_groups before tearing down the buddy_cacheSalman Qazi1-2/+3
We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2012-05-31ext4: add ext4_mb_unload_buddy in the error pathSalman Qazi1-0/+1
ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2012-05-31ext4: don't trash state flags in EXT4_IOC_SETFLAGSTheodore Ts'o1-3/+9
In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2012-05-31ext4: let getattr report the right blocks in delalloc+bigallocTao Ma1-1/+2
In delayed allocation, i_reserved_data_blocks now indicates clusters, not blocks. So report it in the right number. This can be easily exposed by the following command: echo foo > blah; du -hc blah; sync; du -hc blah Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-31Merge branch 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds11-153/+245
Pull nfsd update from Bruce Fields. * 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux: (23 commits) nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek SUNRPC: split upcall function to extract reusable parts nfsd: allocate id-to-name and name-to-id caches in per-net operations. nfsd: make name-to-id cache allocated per network namespace context nfsd: make id-to-name cache allocated per network namespace context nfsd: pass network context to idmap init/exit functions nfsd: allocate export and expkey caches in per-net operations. nfsd: make expkey cache allocated per network namespace context nfsd: make export cache allocated per network namespace context nfsd: pass pointer to export cache down to stack wherever possible. nfsd: pass network context to export caches init/shutdown routines Lockd: pass network namespace to creation and destruction routines NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches nfsd: pass pointer to expkey cache down to stack wherever possible. nfsd: use hash table from cache detail in nfsd export seq ops nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops nfsd: use exp_put() for svc_export_cache put nfsd: use cache detail pointer from svc_export structure on cache put nfsd: add link to owner cache detail to svc_export structure nfsd: use passed cache_detail pointer expkey_parse() ...
2012-05-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds32-153/+6772
Merge misc patches from Andrew Morton: - the "misc" tree - stuff from all over the map - checkpatch updates - fatfs - kmod changes - procfs - cpumask - UML - kexec - mqueue - rapidio - pidns - some checkpoint-restore feature work. Reluctantly. Most of it delayed a release. I'm still rather worried that we don't have a clear roadmap to completion for this work. * emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches) kconfig: update compression algorithm info c/r: prctl: add ability to set new mm_struct::exe_file c/r: prctl: extend PR_SET_MM to set up more mm_struct entries c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat syscalls, x86: add __NR_kcmp syscall fs, proc: introduce /proc/<pid>/task/<tid>/children entry sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector() eventfd: change int to __u64 in eventfd_signal() fs/nls: add Apple NLS pidns: make killed children autoreap pidns: use task_active_pid_ns in do_notify_parent rapidio/tsi721: add DMA engine support rapidio: add DMA engine support for RIO data transfers ipc/mqueue: add rbtree node caching support tools/selftests: add mq_perf_tests ipc/mqueue: strengthen checks on mqueue creation ipc/mqueue: correct mq_attr_ok test ipc/mqueue: improve performance of send/recv selftests: add mq_open_tests ...
2012-05-31c/r: procfs: add arg_start/end, env_start/end and exit_code members to ↵Cyrill Gorcunov1-3/+17
/proc/$pid/stat We would like to have an ability to restore command line arguments and program environment pointers but first we need to obtain them somehow. Thus we put these values into /proc/$pid/stat. The exit_code is needed to restore zombie tasks. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31fs, proc: introduce /proc/<pid>/task/<tid>/children entryCyrill Gorcunov3-0/+127
When we do checkpoint of a task we need to know the list of children the task, has but there is no easy and fast way to generate reverse parent->children chain from arbitrary <pid> (while a parent pid is provided in "PPid" field of /proc/<pid>/status). So instead of walking over all pids in the system (creating one big process tree in memory, just to figure out which children a task has) -- we add explicit /proc/<pid>/task/<tid>/children entry, because the kernel already has this kind of information but it is not yet exported. This is a first level children, not the whole process tree. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()Christopher Yeoh3-9/+8
A cleanup of rw_copy_check_uvector and compat_rw_copy_check_uvector after changes made to support CMA in an earlier patch. Rather than having an additional check_access parameter to these functions, the first paramater type is overloaded to allow the caller to specify CHECK_IOVEC_ONLY which means check that the contents of the iovec are valid, but do not check the memory that they point to. This is used by process_vm_readv/writev where we need to validate that a iovec passed to the syscall is valid but do not want to check the memory that it points to at this point because it refers to an address space in another process. Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31eventfd: change int to __u64 in eventfd_signal()Sha Zhengju1-8/+4
eventfd_ctx->count is an __u64 counter which is allowed to reach ULLONG_MAX. eventfd_write() adds a __u64 value to "count", but the kernel side eventfd_signal() only adds an int value to it. Make them consistent. [akpm@linux-foundation.org: update interface documentation] Signed-off-by: Sha Zhengju <handai.szj@taobao.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31fs/nls: add Apple NLSVladimir Serbinenko13-1/+6451
HFS has support for NLS. However the relevant NLS tables are missing. Here they are automatically transformed from the tables at unicode.org. Codepages requiring special handling like CJK, RTL or Brahmic ones are not included in this patch. [akpm@linux-foundation.org: add unicode.org copyright and permission notices] Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31proc/smaps: show amount of nonlinear ptes in vmaKonstantin Khlebnikov1-0/+12
Currently, nonlinear mappings can not be distinguished from ordinary mappings. This patch adds into /proc/pid/smaps line "Nonlinear: <size> kB", where size is amount of nonlinear ptes in vma, this line appears only if VM_NONLINEAR is set. This information may be useful not only for checkpoint/restore project. Requested by Pavel Emelyanov. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31proc/smaps: carefully handle migration entriesKonstantin Khlebnikov1-8/+10
Currently smaps reports migration entries as "swap", as result "swap" can appears in shared mapping. This patch converts migration entries into pages and handles them as usual. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31proc: report file/anon bit in /proc/pid/pagemapKonstantin Khlebnikov1-18/+30
This is an implementation of Andrew's proposal to extend the pagemap file bits to report what is missing about tasks' working set. The problem with the working set detection is multilateral. In the criu (checkpoint/restore) project we dump the tasks' memory into image files and to do it properly we need to detect which pages inside mappings are really in use. The mincore syscall I though could help with this did not. First, it doesn't report swapped pages, thus we cannot find out which parts of anonymous mappings to dump. Next, it does report pages from page cache as present even if they are not mapped, and it doesn't make that has not been cow-ed. Note, that issue with swap pages is critical -- we must dump swap pages to image file. But the issues with file pages are optimization -- we can take all file pages to image, this would be correct, but if we know that a page is not mapped or not cow-ed, we can remove them from dump file. The dump would still be self-consistent, though significantly smaller in size (up to 10 times smaller on real apps). Andrew noticed, that the proc pagemap file solved 2 of 3 above issues -- it reports whether a page is present or swapped and it doesn't report not mapped page cache pages. But, it doesn't distinguish cow-ed file pages from not cow-ed. I would like to make the last unused bit in this file to report whether the page mapped into respective pte is PageAnon or not. [comment stolen from Pavel Emelyanov's v1 patch] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>