summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-3/+0
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
2019-08-03Merge tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-1/+8
Pull xfs fixes from Darrick Wong: - Avoid leaking kernel stack contents to userspace - Fix a potential null pointer dereference in the dabtree scrub code * tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling() xfs: fix stack contents leakage in the v1 inumber ioctls
2019-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-8/+39
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/acpi/scan.c: document why we don't need the device_hotplug_lock memremap: move from kernel/ to mm/ lib/test_meminit.c: use GFP_ATOMIC in RCU critical section asm-generic: fix -Wtype-limits compiler warnings cgroup: kselftest: relax fs_spec checks mm/memory_hotplug.c: remove unneeded return for void function mm/migrate.c: initialize pud_entry in migrate_vma() coredump: split pipe command whitespace before expanding template page flags: prioritize kasan bits over last-cpuid ubsan: build ubsan.c more conservatively kasan: remove clang version check for KASAN_STACK mm: compaction: avoid 100% CPU usage during compaction when a task is killed mm: migrate: fix reference check race between __find_get_block() and migration mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker ocfs2: remove set but not used variable 'last_hash' Revert "kmemleak: allow to coexist with fault injection" kernel/signal.c: fix a kernel-doc markup
2019-08-03coredump: split pipe command whitespace before expanding templatePaul Wise1-5/+39
Save the offsets of the start of each argument to avoid having to update pointers to each argument after every corename krealloc and to avoid having to duplicate the memory for the dump command. Executable names containing spaces were previously being expanded from %e or %E and then split in the middle of the filename. This is incorrect behaviour since an argument list can represent arguments with spaces. The splitting could lead to extra arguments being passed to the core dump handler that it might have interpreted as options or ignored completely. Core dump handlers that are not aware of this Linux kernel issue will be using %e or %E without considering that it may be split and so they will be vulnerable to processes with spaces in their names breaking their argument list. If their internals are otherwise well written, such as if they are written in shell but quote arguments, they will work better after this change than before. If they are not well written, then there is a slight chance of breakage depending on the details of the code but they will already be fairly broken by the split filenames. Core dump handlers that are aware of this Linux kernel issue will be placing %e or %E as the last item in their core_pattern and then aggregating all of the remaining arguments into one, separated by spaces. Alternatively they will be obtaining the filename via other methods. Both of these will be compatible with the new arrangement. A side effect from this change is that unknown template types (for example %z) result in an empty argument to the dump handler instead of the argument being dropped. This is a desired change as: It is easier for dump handlers to process empty arguments than dropped ones, especially if they are written in shell or don't pass each template item with a preceding command-line option in order to differentiate between individual template types. Most core_patterns in the wild do not use options so they can confuse different template types (especially numeric ones) if an earlier one gets dropped in old kernels. If the kernel introduces a new template type and a core_pattern uses it, the core dump handler might not expect that the argument can be dropped in old kernels. For example, this can result in security issues when %d is dropped in old kernels. This happened with the corekeeper package in Debian and resulted in the interface between corekeeper and Linux having to be rewritten to use command-line options to differentiate between template types. The core_pattern for most core dump handlers is written by the handler author who would generally not insert unknown template types so this change should be compatible with all the core dump handlers that exist. Link: http://lkml.kernel.org/r/20190528051142.24939-1-pabs3@bonedaddy.net Fixes: 74aadce98605 ("core_pattern: allow passing of arguments to user mode helper when core_pattern is a pipe") Signed-off-by: Paul Wise <pabs3@bonedaddy.net> Reported-by: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398] Reported-by: Paul Wise <pabs3@bonedaddy.net> [https://lore.kernel.org/linux-fsdevel/c8b7ecb8508895bf4adb62a748e2ea2c71854597.camel@bonedaddy.net/] Suggested-by: Jakub Wilk <jwilk@jwilk.net> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03ocfs2: remove set but not used variable 'last_hash'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find: fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-02Merge tag 'for-linus-20190802' of git://git.kernel.dk/linux-blockLinus Torvalds2-27/+62
Pull block fixes from Jens Axboe: "Here's a small collection of fixes that should go into this series. This contains: - io_uring potential use-after-free fix (Jackie) - loop regression fix (Jan) - O_DIRECT fragmented bio regression fix (Damien) - Mark Denis as the new floppy maintainer (Denis) - ataflop switch fall-through annotation (Gustavo) - libata zpodd overflow fix (Kees) - libata ahci deferred probe fix (Miquel) - nbd invalidation BUG_ON() fix (Munehisa) - dasd endless loop fix (Stefan)" * tag 'for-linus-20190802' of git://git.kernel.dk/linux-block: s390/dasd: fix endless loop after read unit address configuration block: Fix __blkdev_direct_IO() for bio fragments MAINTAINERS: floppy: take over maintainership nbd: replace kill_bdev() with __invalidate_device() again ata: libahci: do not complain in case of deferred probe io_uring: fix KASAN use after free in io_sq_wq_submit_work loop: Fix mount(2) failure due to race with LOOP_SET_FD libata: zpodd: Fix small read overflow in zpodd_get_mech_type() ataflop: Mark expected switch fall-through
2019-08-02Merge tag 'for-5.3-rc2-tag' of ↵Linus Torvalds4-67/+47
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - tiny race window during 2 transactions aborting at the same time can accidentally lead to a commit - regression fix, possible deadlock during fiemap - fix for an old bug when incremental send can fail on a file that has been deduplicated in a special way * tag 'for-5.3-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix deadlock between fiemap and transaction commits Btrfs: fix race leading to fs corruption after transaction abort Btrfs: fix incremental send failure after deduplication
2019-08-02Merge tag 'gfs2-v5.3-rc2.fixes' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix gfs2 cluster coherency bug" * tag 'gfs2-v5.3-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Inode dirtying fix
2019-08-01block: Fix __blkdev_direct_IO() for bio fragmentsDamien Le Moal1-1/+2
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO (patch 6a43074e2f46) introduced two problems with BIO fragment handling for direct IOs: 1) The dio size processed is calculated by incrementing the ret variable by the size of the bio fragment issued for the dio. However, this size is obtained directly from bio->bi_iter.bi_size AFTER the bio submission which may result in referencing the bi_size value after the bio completed, resulting in an incorrect value use. 2) The ret variable is not incremented by the size of the last bio fragment issued for the bio, leading to an invalid IO size being returned to the user. Fix both problem by using dio->size (which is incremented before the bio submission) to update the value of ret after bio submissions, including for the last bio fragment issued. Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-4/+1
Pull mount_capable() fix from Al Viro. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Unbreak mount_capable()
2019-07-31gfs2: Inode dirtying fixAndreas Gruenbacher1-3/+12
With the recent iomap write page reclaim deadlock fix, it turns out that the GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this happened as a side effect of always adding the inode buffer head to the current transaction with gfs2_trans_add_meta, but this isn't happening consistently anymore. Fix by removing an additional unnecessary gfs2_trans_add_meta call and by setting the GLF_DIRTY flag in gfs2_iomap_end. (The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when syncing out the glock of that inode. When the flag isn't set, inode_go_sync will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will lead to cluster incoherency.) In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the inode as I_DIRTY_DATASYNC to have the inode added to the current transaction: we don't expect metadata to change here, but let's err on the safe side. Fixes: d0a22a4b03b8 ("gfs2: Fix iomap write page reclaim deadlock"); Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-31Unbreak mount_capable()Al Viro1-4/+1
In "consolidate the capability checks in sget_{fc,userns}())" the wrong argument had been passed to mount_capable() by sget_fc(). That mistake had been further obscured later, when switching mount_capable() to fs_context has moved the calculation of bogus argument from sget_fc() to mount_capable() itself. It should've been fc->user_ns all along. Screwed-up-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Christian Brauner <christian@brauner.io> Tested-by: Christian Brauner <christian@brauner.io> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-31io_uring: fix KASAN use after free in io_sq_wq_submit_workJackie Liu1-1/+2
[root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30Merge branch 'dax-fix-5.3-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax fix from Dan Williams: "Fix a botched manual patch update that got dropped between testing and application" * 'dax-fix-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix missed wakeup in put_unlocked_entry()
2019-07-30compat_ioctl: pppoe: fix PPPOEIOCSFWD handlingArnd Bergmann1-3/+0
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30Merge tag 'f2fs-for-5.4-rc3' of ↵Linus Torvalds3-100/+81
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "This set of patches adjust to follow recent setflags changes and fix two regressions" * tag 'f2fs-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: use EINVAL for superblock with invalid magic f2fs: fix to read source block before invalidating it f2fs: remove redundant check from f2fs_setflags_common() f2fs: use generic checking function for FS_IOC_FSSETXATTR f2fs: use generic checking and prep function for FS_IOC_SETFLAGS
2019-07-30loop: Fix mount(2) failure due to race with LOOP_SET_FDJan Kara1-25/+58
Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30xfs: Fix possible null-pointer dereferences in ↵Jia-Ju Bai1-1/+5
xchk_da_btree_block_check_sibling() In xchk_da_btree_block_check_sibling(), there is an if statement on line 274 to check whether ds->state->altpath.blk[level].bp is NULL: if (ds->state->altpath.blk[level].bp) When ds->state->altpath.blk[level].bp is NULL, it is used on line 281: xfs_trans_brelse(..., ds->state->altpath.blk[level].bp); struct xfs_buf_log_item *bip = bp->b_log_item; ASSERT(bp->b_transp == tp); Thus, possible null-pointer dereferences may occur. To fix these bugs, ds->state->altpath.blk[level].bp is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-30Btrfs: fix deadlock between fiemap and transaction commitsFilipe Manana3-5/+22
The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-30Btrfs: fix race leading to fs corruption after transaction abortFilipe Manana1-0/+10
When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-30Btrfs: fix incremental send failure after deduplicationFilipe Manana1-62/+15
When doing an incremental send operation we can fail if we previously did deduplication operations against a file that exists in both snapshots. In that case we will fail the send operation with -EIO and print a message to dmesg/syslog like the following: BTRFS error (device sdc): Send: inconsistent snapshot, found updated \ extent for inode 257 without updated inode item, send root is 258, \ parent root is 257 This requires that we deduplicate to the same file in both snapshots for the same amount of times on each snapshot. The issue happens because a deduplication only updates the iversion of an inode and does not update any other field of the inode, therefore if we deduplicate the file on each snapshot for the same amount of time, the inode will have the same iversion value (stored as the "sequence" field on the inode item) on both snapshots, therefore it will be seen as unchanged between in the send snapshot while there are new/updated/deleted extent items when comparing to the parent snapshot. This makes the send operation return -EIO and print an error message. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our first file. The first half of the file has several 64Kb # extents while the second half as a single 512Kb extent. $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo # Create the base snapshot and the parent send stream from it. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 # Create our second file, that has exactly the same data as the first # file. $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar # Create the second snapshot, used for the incremental send, before # doing the file deduplication. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 # Now before creating the incremental send stream: # # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This # will drop several extent items and add a new one, also updating # the inode's iversion (sequence field in inode item) by 1, but not # any other field of the inode; # # 2) Deduplicate into a different subrange of file foo in snapshot # mysnap2. This will replace an extent item with a new one, also # updating the inode's iversion by 1 but not any other field of the # inode. # # After these two deduplication operations, the inode items, for file # foo, are identical in both snapshots, but we have different extent # items for this inode in both snapshots. We want to check this doesn't # cause send to fail with an error or produce an incorrect stream. $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo # Create the incremental send stream. $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2 ERROR: send ioctl failed with -5: Input/output error This issue started happening back in 2015 when deduplication was updated to not update the inode's ctime and mtime and update only the iversion. Back then we would hit a BUG_ON() in send, but later in 2016 send was updated to return -EIO and print the error message instead of doing the BUG_ON(). A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933 Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29dax: Fix missed wakeup in put_unlocked_entry()Jan Kara1-1/+1
The condition checking whether put_unlocked_entry() needs to wake up following waiter got broken by commit 23c84eb78375 ("dax: Fix missed wakeup with PMD faults"). We need to wake the waiter whenever the passed entry is valid (i.e., non-NULL and not special conflict entry). This could lead to processes never being woken up when waiting for entry lock. Fix the condition. Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/20190729120228.GC17833@quack2.suse.cz Fixes: 23c84eb78375 ("dax: Fix missed wakeup with PMD faults") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-28f2fs: use EINVAL for superblock with invalid magicIcenowy Zheng1-24/+24
The kernel mount_block_root() function expects -EACESS or -EINVAL for a unmountable filesystem when trying to mount the root with different filesystem types. However, in 5.3-rc1 the behavior when F2FS code cannot find valid block changed to return -EFSCORRUPTED(-EUCLEAN), and this error code makes mount_block_root() fail when trying to probe F2FS. When the magic number of the superblock mismatches, it has a high probability that it's just not a F2FS. In this case return -EINVAL seems to be a better result, and this return value can make mount_block_root() probing work again. Return -EINVAL when the superblock has magic mismatch, -EFSCORRUPTED in other cases (the magic matches but the superblock cannot be recognized). Fixes: 10f966bbf521 ("f2fs: use generic EFSBADCRC/EFSCORRUPTED") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-28xfs: fix stack contents leakage in the v1 inumber ioctlsDarrick J. Wong1-0/+3
Explicitly initialize the onstack structures to zero so we don't leak kernel memory into userspace when converting the in-core inumbers structure to the v1 inogrp ioctl structure. Add a comment about why we have to use memset to ensure that the padding holes in the structures are set to zero. Fixes: 5f19c7fc6873351 ("xfs: introduce v5 inode group structure") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-07-28Merge tag 'spdx-5.3-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX fixes from Greg KH: "Here are some small SPDX fixes for 5.3-rc2 for things that came in during the 5.3-rc1 merge window that we previously missed. Only three small patches here: - two uapi patches to resolve some SPDX tags that were not correct - fix an invalid SPDX tag in the iomap Makefile file All have been properly reviewed on the public mailing lists" * tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: iomap: fix Invalid License ID treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
2019-07-27Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two fixes for the fair scheduling class: - Prevent freeing memory which is accessible by concurrent readers - Make the RCU annotations for numa groups consistent" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Use RCU accessors consistently for ->numa_group sched/fair: Don't free p->numa_faults with concurrent readers
2019-07-27Merge tag 'Wimplicit-fallthrough-5.3-rc2' of ↵Linus Torvalds2-37/+68
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva: "This marks switch cases where we are expecting to fall through, and globally enables the -Wimplicit-fallthrough option in the main Makefile. Finally, some missing-break fixes that have been tagged for -stable: - drm/amdkfd: Fix missing break in switch statement - drm/amdgpu/gfx10: Fix missing break in switch statement With these changes, we completely get rid of all the fall-through warnings in the kernel" * tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Makefile: Globally enable fall-through warning drm/i915: Mark expected switch fall-throughs drm/amd/display: Mark expected switch fall-throughs drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning drm/amdgpu/gfx10: Fix missing break in switch statement drm/amdkfd: Fix missing break in switch statement perf/x86/intel: Mark expected switch fall-throughs mtd: onenand_base: Mark expected switch fall-through afs: fsclient: Mark expected switch fall-throughs afs: yfsclient: Mark expected switch fall-throughs can: mark expected switch fall-throughs firewire: mark expected switch fall-throughs
2019-07-26f2fs: fix to read source block before invalidating itJaegeuk Kim1-36/+34
f2fs_allocate_data_block() invalidates old block address and enable new block address. Then, if we try to read old block by f2fs_submit_page_bio(), it will give WARN due to reading invalid blocks. Let's make the order sanely back. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-26Merge tag 'for-5.3-rc1-tag' of ↵Linus Torvalds2-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two regression fixes: - hangs caused by a missing barrier in the locking code - memory leaks of extent_state due to bad handling of a cached pointer" * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range btrfs: Fix deadlock caused by missing memory barrier
2019-07-26Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-2/+2
Pull vfs umount_tree() leak fix from Al Viro: "Fix braino introduced in 'switch the remnants of releasing the mountpoint away from fs_pin'. The most visible result is leaking struct mount when mounting btrfs, making it impossible to shut down" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the struct mount leak in umount_tree()
2019-07-26Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-blockLinus Torvalds2-25/+114
Pull block fixes from Jens Axboe: - Several io_uring fixes/improvements: - Blocking fix for O_DIRECT (me) - Latter page slowness for registered buffers (me) - Fix poll hang under certain conditions (me) - Defer sequence check fix for wrapped rings (Zhengyuan) - Mismatch in async inc/dec accounting (Zhengyuan) - Memory ordering issue that could cause stall (Zhengyuan) - Track sequential defer in bytes, not pages (Zhengyuan) - NVMe pull request from Christoph - Set of hang fixes for wbt (Josef) - Redundant error message kill for libahci (Ding) - Remove unused blk_mq_sched_started_request() and related ops (Marcos) - drbd dynamic alloc shash descriptor to reduce stack use (Arnd) - blkcg ->pd_stat() non-debug print (Tejun) - bcache memory leak fix (Wei) - Comment fix (Akinobu) - BFQ perf regression fix (Paolo) * tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits) io_uring: ensure ->list is initialized for poll commands Revert "nvme-pci: don't create a read hctx mapping without read queues" nvme: fix multipath crash when ANA is deactivated nvme: fix memory leak caused by incorrect subsystem free nvme: ignore subnqn for ADATA SX6000LNP drbd: dynamically allocate shash descriptor block: blk-mq: Remove blk_mq_sched_started_request and started_request bcache: fix possible memory leak in bch_cached_dev_run() io_uring: track io length in async_list based on bytes io_uring: don't use iov_iter_advance() for fixed buffers block: properly handle IOCB_NOWAIT for async O_DIRECT IO blk-mq: allow REQ_NOWAIT to return an error inline io_uring: add a memory barrier before atomic_read rq-qos: use a mb for got_token rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule rq-qos: don't reset has_sleepers on spurious wakeups rq-qos: fix missed wake-ups in rq_qos_throttle wait: add wq_has_single_sleeper helper block, bfq: check also in-flight I/O in dispatch plugging block: fix sysfs module parameters directory path in comment ...
2019-07-26fix the struct mount leak in umount_tree()Al Viro1-2/+2
We need to drop everything we remove from the tree, whether mnt_has_parent() is true or not. Usually the bug manifests as a slow memory leak (leaked struct mount for initramfs); it becomes much more visible in mount_subtree() users, such as btrfs. There we leak a struct mount for btrfs superblock being mounted, which prevents fs shutdown on subsequent umount. Fixes: 56cbb429d911 ("switch the remnants of releasing the mountpoint away from fs_pin") Reported-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-26btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_rangeNaohiro Aota1-5/+6
btrfs_lock_and_flush_ordered_range() loads given "*cached_state" into cachedp, which, in general, is NULL. Then, lock_extent_bits() updates "cachedp", but it never goes backs to the caller. Thus the caller still see its "cached_state" to be NULL and never free the state allocated under btrfs_lock_and_flush_ordered_range(). As a result, we will see massive state leak with e.g. fstests btrfs/005. Fix this bug by properly handling the pointers. Fixes: bd80d94efb83 ("btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25afs: fsclient: Mark expected switch fall-throughsGustavo A. R. Silva1-18/+33
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: Warning level 3 was used: -Wimplicit-fallthrough=3 fs/afs/fsclient.c: In function ‘afs_deliver_fs_fetch_acl’: fs/afs/fsclient.c:2199:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/fsclient.c:2202:2: note: here case 1: ^~~~ fs/afs/fsclient.c:2216:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/fsclient.c:2219:2: note: here case 2: ^~~~ fs/afs/fsclient.c:2225:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/fsclient.c:2228:2: note: here case 3: ^~~~ This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25afs: yfsclient: Mark expected switch fall-throughsGustavo A. R. Silva1-19/+35
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: fs/afs/yfsclient.c: In function ‘yfs_deliver_fs_fetch_opaque_acl’: fs/afs/yfsclient.c:1984:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/yfsclient.c:1987:2: note: here case 1: ^~~~ fs/afs/yfsclient.c:2005:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/yfsclient.c:2008:2: note: here case 2: ^~~~ fs/afs/yfsclient.c:2014:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/yfsclient.c:2017:2: note: here case 3: ^~~~ fs/afs/yfsclient.c:2035:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/yfsclient.c:2038:2: note: here case 4: ^~~~ fs/afs/yfsclient.c:2047:19: warning: this statement may fall through [-Wimplicit-fallthrough=] call->unmarshall++; ~~~~~~~~~~~~~~~~^~ fs/afs/yfsclient.c:2050:2: note: here case 5: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Also, fix some commenting style issues. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25io_uring: ensure ->list is initialized for poll commandsJens Axboe1-0/+2
Daniel reports that when testing an http server that uses io_uring to poll for incoming connections, sometimes it hard crashes. This is due to an uninitialized list member for the io_uring request. Normally this doesn't trigger and none of the test cases caught it. Reported-by: Daniel Kozak <kozzi11@gmail.com> Tested-by: Daniel Kozak <kozzi11@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-25Merge branch 'access-creds'Linus Torvalds1-0/+19
The access() (and faccessat()) credentials change can cause an unnecessary load on the RCU machinery because every access() call ends up freeing the temporary access credential using RCU. This isn't really noticeable on small machines, but if you have hundreds of cores you can cause huge slowdowns due to RCU storms. It's easy to avoid: the temporary access crededntials aren't actually normally accessed using RCU at all, so we can avoid the whole issue by just marking them as such. * access-creds: access: avoid the RCU grace period for the temporary subjective credentials
2019-07-25btrfs: Fix deadlock caused by missing memory barrierNikolay Borisov1-3/+6
Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int") changed the type of blocking_writers but forgot to adjust relevant code in btrfs_tree_unlock by converting the smp_mb__after_atomic to smp_mb. This opened up the possibility of a deadlock due to re-ordering of setting blocking_writers and checking/waking up the waiter. This particular lockup is explained in a comment above waitqueue_active() function. Fix it by converting the memory barrier to a full smp_mb, accounting for the fact that blocking_writers is a simple integer. Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int") Tested-by: Johannes Thumshirn <jthumshirn@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25sched/fair: Don't free p->numa_faults with concurrent readersJann Horn1-1/+1
When going through execve(), zero out the NUMA fault statistics instead of freeing them. During execve, the task is reachable through procfs and the scheduler. A concurrent /proc/*/sched reader can read data from a freed ->numa_faults allocation (confirmed by KASAN) and write it back to userspace. I believe that it would also be possible for a use-after-free read to occur through a race between a NUMA fault and execve(): task_numa_fault() can lead to task_numa_compare(), which invokes task_weight() on the currently running task of a different CPU. Another way to fix this would be to make ->numa_faults RCU-managed or add extra locking, but it seems easier to wipe the NUMA fault statistics on execve. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()") Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25iomap: fix Invalid License IDMasahiro Yamada1-1/+1
Detected by: $ ./scripts/spdxcheck.py fs/iomap/Makefile: 1:27 Invalid License ID: GPL-2.0-or-newer Fixes: 1c230208f53d ("iomap: start moving code to fs/iomap/") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24access: avoid the RCU grace period for the temporary subjective credentialsLinus Torvalds1-0/+19
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-22Merge tag 'for-5.3-rc1-tag' of ↵Linus Torvalds4-4/+32
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
2019-07-21io_uring: track io length in async_list based on bytesZhengyuan Liu1-13/+11
We are using PAGE_SIZE as the unit to determine if the total len in async_list has exceeded max_pages, it's not fair for smaller io sizes. For example, if we are doing 1k-size io streams, we will never exceed max_pages since len >>= PAGE_SHIFT always gets zero. So use original bytes to make it more accurate. Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-21io_uring: don't use iov_iter_advance() for fixed buffersJens Axboe1-2/+38
Hrvoje reports that when a large fixed buffer is registered and IO is being done to the latter pages of said buffer, the IO submission time is much worse: reading to the start of the buffer: 11238 ns reading to the end of the buffer: 1039879 ns In fact, it's worse by two orders of magnitude. The reason for that is how io_uring figures out how to setup the iov_iter. We point the iter at the first bvec, and then use iov_iter_advance() to fast-forward to the offset within that buffer we need. However, that is abysmally slow, as it entails iterating the bvecs that we setup as part of buffer registration. There's really no need to use this generic helper, as we know it's a BVEC type iterator, and we also know that each bvec is PAGE_SIZE in size, apart from possibly the first and last. Hence we can just use a shift on the offset to find the right index, and then adjust the iov_iter appropriately. After this fix, the timings are: reading to the start of the buffer: 10135 ns reading to the end of the buffer: 1377 ns Or about an 755x improvement for the tail page. Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com> Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-21block: properly handle IOCB_NOWAIT for async O_DIRECT IOJens Axboe1-8/+50
A caller is supposed to pass in REQ_NOWAIT if we can't block for any given operation, but O_DIRECT for block devices just ignore this. Hence we'll block for various resource shortages on the block layer side, like having to wait for requests. Use the new REQ_NOWAIT_INLINE to ask for this error to be returned inline, so we can handle it appropriately and return -EAGAIN to the caller. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-21Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-31/+126
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
2019-07-20Merge branch 'work.dcache2' of ↵Linus Torvalds7-115/+172
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull dcache and mountpoint updates from Al Viro: "Saner handling of refcounts to mountpoints. Transfer the counting reference from struct mount ->mnt_mountpoint over to struct mountpoint ->m_dentry. That allows us to get rid of the convoluted games with ordering of mount shutdowns. The cost is in teaching shrink_dcache_{parent,for_umount} to cope with mixed-filesystem shrink lists, which we'll also need for the Slab Movable Objects patchset" * 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch the remnants of releasing the mountpoint away from fs_pin get rid of detach_mnt() make struct mountpoint bear the dentry reference to mountpoint, not struct mount Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt() __detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore nfs: dget_parent() never returns NULL ceph: don't open-code the check for dead lockref
2019-07-19Merge tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds11-2217/+2259
Pull iomap split/cleanup from Darrick Wong: "As promised, here's the second part of the iomap merge for 5.3, in which we break up iomap.c into smaller files grouped by functional area so that it'll be easier in the long run to maintain cohesiveness of code units and to review incoming patches. There are no functional changes and fs/iomap.c split cleanly. Summary: - Regroup the fs/iomap.c code by major functional area so that we can start development for 5.4 from a more stable base" * tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: move internal declarations into fs/iomap/ iomap: move the main iteration code into a separate file iomap: move the buffered IO code into a separate file iomap: move the direct IO code into a separate file iomap: move the SEEK_HOLE code into a separate file iomap: move the file mapping reporting code into a separate file iomap: move the swapfile code into a separate file iomap: start moving code to fs/iomap/
2019-07-19Merge branch 'work.adfs' of ↵Linus Torvalds7-141/+161
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull adfs updates from Al Viro: "More ADFS patches from Russell King" * 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/adfs: add time stamp and file type helpers fs/adfs: super: limit idlen according to directory type fs/adfs: super: fix use-after-free bug fs/adfs: super: safely update options on remount fs/adfs: super: correct superblock flags fs/adfs: clean up indirect disc addresses and fragment IDs fs/adfs: clean up error message printing fs/adfs: use %pV for error messages fs/adfs: use format_version from disc_record fs/adfs: add helper to get filesystem size fs/adfs: add helper to get discrecord from map fs/adfs: correct disc record structure
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds23-229/+252
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...