| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Extend commit ce81bb256a22 ("fs/binfmt_elf: use PT_LOAD p_align values
for suitable start address") which fixed PIE binaries built with
-Wl,-z,max-page-size=0x200000, to cover static PIE binaries. This
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=215275
Tested by verifying static PIE binaries with -Wl,-z,max-page-size=0x200000 loading.
Link: https://lkml.kernel.org/r/20211209174052.370537-1-hjl.tools@gmail.com
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I was implementing a new per-cpu kthread cfs_migration, I found the
comm of it "cfs_migration/%u" is truncated due to the limitation of
TASK_COMM_LEN. For example, the comm of the percpu thread on CPU10~19
all have the same name "cfs_migration/1", which will confuse the user.
This issue is not critical, because we can get the corresponding CPU
from the task's Cpus_allowed. But for kthreads corresponding to other
hardware devices, it is not easy to get the detailed device info from
task comm, for example,
jbd2/nvme0n1p2-
xfs-reclaim/sdf
Currently there are so many truncated kthreads:
rcu_tasks_kthre
rcu_tasks_rude_
rcu_tasks_trace
poll_mpt3sas0_s
ext4-rsv-conver
xfs-reclaim/sd{a, b, c, ...}
xfs-blockgc/sd{a, b, c, ...}
xfs-inodegc/sd{a, b, c, ...}
audit_send_repl
ecryptfs-kthrea
vfio-irqfd-clea
jbd2/nvme0n1p2-
...
We can shorten these names to work around this problem, but it may be
not applied to all of the truncated kthreads. Take 'jbd2/nvme0n1p2-'
for example, it is a nice name, and it is not a good idea to shorten it.
One possible way to fix this issue is extending the task comm size, but
as task->comm is used in lots of places, that may cause some potential
buffer overflows. Another more conservative approach is introducing a
new pointer to store kthread's full name if it is truncated, which won't
introduce too much overhead as it is in the non-critical path. Finally
we make a dicision to use the second approach. See also the discussions
in this thread:
https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/
After this change, the full name of these truncated kthreads will be
displayed via /proc/[pid]/comm:
rcu_tasks_kthread
rcu_tasks_rude_kthread
rcu_tasks_trace_kthread
poll_mpt3sas0_statu
ext4-rsv-conversion
xfs-reclaim/sdf1
xfs-blockgc/sdf1
xfs-inodegc/sdf1
audit_send_reply
ecryptfs-kthread
vfio-irqfd-cleanup
jbd2/nvme0n1p2-8
Link: https://lkml.kernel.org/r/20211120112850.46047-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is better to use get_task_comm() instead of the open coded string
copy as we do in other places.
struct elf_prpsinfo is used to dump the task information in userspace
coredump or kernel vmcore. Below is the verification of vmcore,
crash> ps
PID PPID CPU TASK ST %MEM VSZ RSS COMM
0 0 0 ffffffff9d21a940 RU 0.0 0 0 [swapper/0]
> 0 0 1 ffffa09e40f85e80 RU 0.0 0 0 [swapper/1]
> 0 0 2 ffffa09e40f81f80 RU 0.0 0 0 [swapper/2]
> 0 0 3 ffffa09e40f83f00 RU 0.0 0 0 [swapper/3]
> 0 0 4 ffffa09e40f80000 RU 0.0 0 0 [swapper/4]
> 0 0 5 ffffa09e40f89f80 RU 0.0 0 0 [swapper/5]
0 0 6 ffffa09e40f8bf00 RU 0.0 0 0 [swapper/6]
> 0 0 7 ffffa09e40f88000 RU 0.0 0 0 [swapper/7]
> 0 0 8 ffffa09e40f8de80 RU 0.0 0 0 [swapper/8]
> 0 0 9 ffffa09e40f95e80 RU 0.0 0 0 [swapper/9]
> 0 0 10 ffffa09e40f91f80 RU 0.0 0 0 [swapper/10]
> 0 0 11 ffffa09e40f93f00 RU 0.0 0 0 [swapper/11]
> 0 0 12 ffffa09e40f90000 RU 0.0 0 0 [swapper/12]
> 0 0 13 ffffa09e40f9bf00 RU 0.0 0 0 [swapper/13]
> 0 0 14 ffffa09e40f98000 RU 0.0 0 0 [swapper/14]
> 0 0 15 ffffa09e40f9de80 RU 0.0 0 0 [swapper/15]
It works well as expected.
Some comments are added to explain why we use the hard-coded 16.
Link: https://lkml.kernel.org/r/20211120112738.45980-5-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the dest buffer size is smaller than sizeof(tsk->comm), the buffer
will be without null ternimator, that may cause problem. Using
strscpy_pad() instead of strncpy() in __get_task_comm() can make the
string always nul ternimated and zero padded.
Link: https://lkml.kernel.org/r/20211120112738.45980-3-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "task comm cleanups", v2.
This patchset is part of the patchset "extend task comm from 16 to
24"[1]. Now we have different opinion that dynamically allocates memory
to store kthread's long name into a separate pointer, so I decide to
take the useful cleanups apart from the original patchset and send it
separately[2].
These useful cleanups can make the usage around task comm less
error-prone. Furthermore, it will be useful if we want to extend task
comm in the future.
[1]. https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/
[2]. https://lore.kernel.org/lkml/CALOAHbAx55AUo3bm8ZepZSZnw7A08cvKPdPyNTf=E_tPqmw5hw@mail.gmail.com/
This patch (of 7):
strlcpy() can trigger out-of-bound reads on the source string[1], we'd
better use strscpy() instead. To make it be robust against full tsk->comm
copies that got noticed in other places, we should make sure it's zero
padded.
[1] https://github.com/KSPP/linux/issues/89
Link: https://lkml.kernel.org/r/20211120112738.45980-1-laoar.shao@gmail.com
Link: https://lkml.kernel.org/r/20211120112738.45980-2-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Subsequent if judgments will assign new values to ret, so the statement
here should be deleted
The clang_analyzer complains as follows:
fs/proc/proc_sysctl.c:
Value stored to 'ret' is never read
Link: https://lkml.kernel.org/r/20211230063622.586360-1-luo.penghao@zte.com.cn
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sysctl_print_dir() always terminates the printed path name with a slash,
so printing a slash before the file part causes a duplicate like in
sysctl duplicate entry: /kernel//perf_user_access
Fix this by dropping the extra slash.
Link: https://lkml.kernel.org/r/e3054d605dc56f83971e4b6d2f5fa63a978720ad.1641551872.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert return type of proc_fd_access_allowed() and the 'allowed' in it
to be boolean since the return type of ptrace_may_access() is boolean.
Link: https://lkml.kernel.org/r/20211219024404.29779-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit cc5f2704c934 ("proc/vmcore: convert oldmem_pfn_is_ram callback
to more generic vmcore callbacks"), we added detection of surprise
vmcore_cb unregistration after the vmcore was already opened. Once
detected, we warn the user and simulate reading zeroes from that point
on when accessing the vmcore.
The basic reason was that unexpected unregistration, for example, by
manually unbinding a driver from a device after opening the vmcore, is
not supported and could result in reading oldmem the vmcore_cb would
have actually prohibited while registered. However, something like that
can similarly be trigger by a user that's really looking for trouble
simply by unbinding the relevant driver before opening the vmcore -- or
by disallowing loading the driver in the first place. So it's actually
of limited help.
Currently, unregistration can only be triggered via virtio-mem when
manually unbinding the driver from the device inside the VM; there is no
way to trigger it from the hypervisor, as hypervisors don't allow for
unplugging virtio-mem devices -- ripping out system RAM from a VM
without coordination with the guest is usually not a good idea.
The important part is that unbinding the driver and unregistering the
vmcore_cb while concurrently reading the vmcore won't crash the system,
and that is handled by the rwsem.
To make the mechanism more future proof, let's remove the "read zero"
part, but leave the warning in place. For example, we could have a
future driver (like virtio-balloon) that will contact the hypervisor to
figure out if we already populated a page for a given PFN.
Hotunplugging such a device and consequently unregistering the vmcore_cb
could be triggered from the hypervisor without harming the system even
while kdump is running. In that case, we don't want to silently end up
with a vmcore that contains wrong data, because the user inside the VM
might be unaware of the hypervisor action and might easily miss the
warning in the log.
Link: https://lkml.kernel.org/r/20211111192243.22002-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To 2.35
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For improved debugging it can be helpful to send version information
as other clients do during NTLMSSP negotiation. See protocol document
MS-NLMP section 2.2.1.1
Set the major and minor versions based on the kernel version, and the
BuildNumber based on the internal cifs.ko module version number,
and following the recommendation in the protocol documentation
(MS-NLMP section 2.2.10) we set the NTLMRevisionCurrent field to 15.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The xfs_inodegc_stop() helper performs a high level flush of pending
work on the percpu queues and then runs a cancel_work_sync() on each
of the percpu work tasks to ensure all work has completed before
returning. While cancel_work_sync() waits for wq tasks to complete,
it does not guarantee work tasks have started. This means that the
_stop() helper can queue and instantly cancel a wq task without
having completed the associated work. This can be observed by
tracepoint inspection of a simple "rm -f <file>; fsfreeze -f <mnt>"
test:
xfs_destroy_inode: ... ino 0x83 ...
xfs_inode_set_need_inactive: ... ino 0x83 ...
xfs_inodegc_stop: ...
...
xfs_inodegc_start: ...
xfs_inodegc_worker: ...
xfs_inode_inactivating: ... ino 0x83 ...
The first few lines show that the inode is removed and need inactive
state set, but the inactivation work has not completed before the
inodegc mechanism stops. The inactivation doesn't actually occur
until the fs is unfrozen and the gc mechanism starts back up. Note
that this test requires fsfreeze to reproduce because xfs_freeze
indirectly invokes xfs_fs_statfs(), which calls xfs_inodegc_flush().
When this occurs, the workqueue try_to_grab_pending() logic first
tries to steal the pending bit, which does not succeed because the
bit has been set by queue_work_on(). Subsequently, it checks for
association of a pool workqueue from the work item under the pool
lock. This association is set at the point a work item is queued and
cleared when dequeued for processing. If the association exists, the
work item is removed from the queue and cancel_work_sync() returns
true. If the pwq association is cleared, the remove attempt assumes
the task is busy and retries (eventually returning false to the
caller after waiting for the work task to complete).
To avoid this race, we can flush each work item explicitly before
cancel. However, since the _queue_all() already schedules each
underlying work item, the workqueue level helpers are sufficient to
achieve the same ordering effect. E.g., the inodegc enabled flag
prevents scheduling any further work in the _stop() case. Use the
drain_workqueue() helper in this particular case to make the intent
a bit more self explanatory.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
We used to have more code around the work loop, but now the goto and
lock juggling just makes it less readable than it should. Get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change the cifs filesystem to take account of the changes to fscache's
indexing rewrite and reenable caching in cifs.
The following changes have been made:
(1) The fscache_netfs struct is no more, and there's no need to register
the filesystem as a whole.
(2) The session cookie is now an fscache_volume cookie, allocated with
fscache_acquire_volume(). That takes three parameters: a string
representing the "volume" in the index, a string naming the cache to
use (or NULL) and a u64 that conveys coherency metadata for the
volume.
For cifs, I've made it render the volume name string as:
"cifs,<ipaddress>,<sharename>"
where the sharename has '/' characters replaced with ';'.
This probably needs rethinking a bit as the total name could exceed
the maximum filename component length.
Further, the coherency data is currently just set to 0. It needs
something else doing with it - I wonder if it would suffice simply to
sum the resource_id, vol_create_time and vol_serial_number or maybe
hash them.
(3) The fscache_cookie_def is no more and needed information is passed
directly to fscache_acquire_cookie(). The cache no longer calls back
into the filesystem, but rather metadata changes are indicated at
other times.
fscache_acquire_cookie() is passed the same keying and coherency
information as before.
(4) The functions to set/reset cookies are removed and
fscache_use_cookie() and fscache_unuse_cookie() are used instead.
fscache_use_cookie() is passed a flag to indicate if the cookie is
opened for writing. fscache_unuse_cookie() is passed updates for the
metadata if we changed it (ie. if the file was opened for writing).
These are called when the file is opened or closed.
(5) cifs_setattr_*() are made to call fscache_resize() to change the size
of the cache object.
(6) The functions to read and write data are stubbed out pending a
conversion to use netfslib.
Changes
=======
ver #8:
- Abstract cache invalidation into a helper function.
- Fix some checkpatch warnings[3].
ver #7:
- Removed the accidentally added-back call to get the super cookie in
cifs_root_iget().
- Fixed the right call to cifs_fscache_get_super_cookie() to take account
of the "-o fsc" mount flag.
ver #6:
- Moved the change of gfpflags_allow_blocking() to current_is_kswapd() for
cifs here.
- Fixed one of the error paths in cifs_atomic_open() to jump around the
call to use the cookie.
- Fixed an additional successful return in the middle of cifs_open() to
use the cookie on the way out.
- Only get a volume cookie (and thus inode cookies) when "-o fsc" is
supplied to mount.
ver #5:
- Fixed a couple of bits of cookie handling[2]:
- The cookie should be released in cifs_evict_inode(), not
cifsFileInfo_put_final(). The cookie needs to persist beyond file
closure so that writepages will be able to write to it.
- fscache_use_cookie() needs to be called in cifs_atomic_open() as it is
for cifs_open().
ver #4:
- Fixed the use of sizeof with memset.
- tcon->vol_create_time is __le64 so doesn't need cpu_to_le64().
ver #3:
- Canonicalise the cifs coherency data to make the cache portable.
- Set volume coherency data.
ver #2:
- Use gfpflags_allow_blocking() rather than using flag directly.
- Upgraded to -rc4 to allow for upstream changes[1].
- fscache_acquire_volume() now returns errors.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23b55d673d7527b093cd97b7c217c82e70cd1af0 [1]
Link: https://lore.kernel.org/r/3419813.1641592362@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/CAH2r5muTanw9pJqzAHd01d9A8keeChkzGsCEH6=0rHutVLAF-A@mail.gmail.com/ [3]
Link: https://lore.kernel.org/r/163819671009.215744.11230627184193298714.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906982979.143852.10672081929614953210.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967187187.1823006.247415138444991444.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021579335.640689.2681324337038770579.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/3462849.1641593783@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/1318953.1642024578@warthog.procyon.org.uk/ # v6
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Recent restructuring of cifs_reconnect introduced a helper func
named cifs_ses_mark_for_reconnect, which updates the state of tcp
session for all the channels of a session for reconnect.
However, this does not update the session state and chans_need_reconnect
bitmask. This change fixes that.
Also, cifs_mark_tcp_sess_for_reconnect should mark set the bitmask
for all channels when the whole session is marked for reconnect.
Fixed that here too.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Till the end of SMB session setup, update tcpStatus and
avoid updating session status field. There was a typo in
cifs_setup_session, which caused ses->status to be updated
instead. This was causing issues during reconnect.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The status of tcp session, smb session and tcon have the
same flow, irrespective of the SMB version used. Hence
these status checks and updates should happen in the
version independent callers of these commands.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_tree_connect checks and sets the tidStatus for the tcon.
cifs_tree_connect also calls a dfs specific tree connect
function, which also does similar checks. This should
not happen. Removing it with this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Recently, the cifs_reconnect code was refactored into
two branches for regular vs dfs codepath. Some of my
recent changes were missing in the dfs path, namely the
code to enable periodic DNS query, and a missing lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ses_selected is being declared and set at several places. It is not
being used. Remove it.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A spin lock called chan_lock was introduced recently.
But not all accesses were protected. Doing that with
this change.
To make sure that a channel is not freed when in use,
we need to introduce a ref count. But today, we don't
ever free channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Recent changes to multichannel required some adjustments in
the way connection states transitioned during/after reconnect.
Also some minor fixes:
1. A pending switch of GlobalMid_Lock to cifs_tcp_ses_lock
2. Relocations of the code that logs reconnect
3. Changed some code in allocate_mid to suit the new scheme
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With the new multichannel logic, when a channel needs reconnection,
the tree connect and other channels can still be active.
This fix will handle cases of checking for channel reconnect,
when the tcon does not need reconnect.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues in
f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
the page cache management used for compression. Other than them, we've
done typical work including sysfs, code clean-ups, tracepoint, sanity
check, in addition to bug fixes on corner cases.
Enhancements:
- use iomap for direct IO
- try to avoid lock contention to improve f2fs_ckpt speed
- avoid unnecessary memory allocation in compression flow
- POSIX_FADV_DONTNEED drops the page cache containing compression
pages
- add some sysfs entries (gc_urgent_high_remaining, pending_discard)
Bug fixes:
- try not to expose unwritten blocks to user by DIO (this was added
to avoid merge conflict; another patch is coming to address other
missing case)
- relax minor error condition for file pinning feature used in
Android OTA
- fix potential deadlock case in compression flow
- should not truncate any block on pinned file
In addition, we've done some code clean-ups and tracepoint/sanity
check improvement"
* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: do not allow partial truncation on pinned file
f2fs: remove redunant invalidate compress pages
f2fs: Simplify bool conversion
f2fs: don't drop compressed page cache in .{invalidate,release}page
f2fs: fix to reserve space for IO align feature
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
f2fs: support fault injection to f2fs_trylock_op()
f2fs: clean up __find_inline_xattr() with __find_xattr()
f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
f2fs: do not bother checkpoint by f2fs_get_node_info
f2fs: avoid down_write on nat_tree_lock during checkpoint
f2fs: compress: fix potential deadlock of compress file
f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
f2fs: add gc_urgent_high_remaining sysfs node
f2fs: fix to do sanity check in is_alive()
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
f2fs: fix to do sanity check on inode type during garbage collection
f2fs: avoid duplicate call of mark_inode_dirty
f2fs: show number of pending discard commands
f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
...
|
|
An active work can have poll armed, hence it's not enough to just do
the async work removal and return the value if it's different from "not
found". Rather than make poll removal special, just fall through to do
the remaining type lookups and removals.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have a gap where a worker removes an item from the work list and to
when it gets added as the workers active work. In this state, the work
item cannot be found by cancelations. This is a small window, but it does
exist.
Add a temporary pointer to a work item that isn't on the pending work
list anymore, but also not the active work. This is needed as we need
to drop the wqe lock in between grabbing the work item and marking it
as active, to ensure that signal based cancelations are properly
ordered.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than split these into two separate lookups and matches, combine
them into one loop. This will become important when we can guarantee
that we don't have a window where a pending work item isn't discoverable
in either state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_wqe_cancel_pending_work() grabs it internally, grab it upfront
instead. For the running work cancelation, grab the lock around it as
well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation to nesting it under the wqe lock (which is raw due to
being acquired from the scheduler side), change the io_worker lock from
a normal spinlock to a raw spinlock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't use 'work' anymore in the busy logic, remove the dead argument.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
- If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
field of the client request.
- If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
or global RequireMessageSigning is TRUE.
When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The "ksmbd_socket" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
if the Channel of a SMB2 WRITE request is
SMB2_CHANNEL_RDMA_V1_INVALIDTE, a client
does not invalidate its memory regions but
ksmbd must do it by sending a SMB2 WRITE response
with IB_WR_SEND_WITH_INV.
But if errors occur while processing a SMB2
READ/WRITE request, ksmbd sends a response
with IB_WR_SEND. So a client could use memory
regions already in use.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In the October updates to MS-SMB2 two additional FSCTLs
were described. Add the missing defines for these,
as well as fix a typo in an earlier define.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove these unused ia32 compat declarations; all the bits involved have
either been withdrawn or hoisted to the VFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
|
|
The "PAGE_SIZE - 2 - size" calculation in legacy_parse_param() is an
unsigned type so a large value of "size" results in a high positive
value instead of a negative value as expected. Fix this by getting rid
of the subtraction.
Signed-off-by: Jamie Hill-Daniel <jamie@hill-daniel.co.uk>
Signed-off-by: William Liu <willsroot@protonmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RHBZ: 2008434
Some servers, such as Windows2016 have a very low number of concurrent mounts that
they allow from each client.
This can be a problem if you have a more than a handful (==3 in this case)
of cifs entries in your fstab and cause a number of the mounts there to randomly fail.
Add a global mutex and use it to serialize all mount attempts.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fixes from Mike Marshall:
"Two fixes:
- Fix the size of a memory allocation in orangefs_bufmap_alloc()
(Christophe JAILLET)
- Use default_groups in kobj_type (Greg KH)"
* tag 'for-linus-5.17-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()
orangefs: use default_groups in kobj_type
|
|
Windows SMB server responds with STATUS_OBJECT_NAME_INVALID code to
SMB2 QUERY_INFO request for "\<server>\<dfsname>\<linkpath>" DFS reference,
where <dfsname> contains non-ASCII unicode symbols.
Check such DFS reference and emulate -EREMOTE if it is actual.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215440
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
alloc_path_with_tree_prefix() concatenates tree prefix and the path.
Windows CIFS client does not add separator after the tree prefix if the path
is empty. Let's do the same.
This fixes mounting DFS namespaces with names containing non-ASCII symbols.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215440
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Eliminate the follow smatch warning:
fs/cifs/sess.c:1581 sess_auth_rawntlmssp_authenticate() warn:
inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One of my previous fixes:
cifs: send workstation name during ntlmssp session setup
...changed the prototype of build_ntlmssp_negotiate_blob
from being allocated by the caller to being allocated within
the function. The caller needs to free this object too.
While SMB2 version of the caller did it, I forgot to free
for the SMB1 version. Fixing that here.
Fixes: 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now that we've made these ioctls defunct, move them from xfs_fs.h to
xfs_ioctl.c, which effectively removes them from the publicly supported
ioctl interfaces for XFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
|
|
According to the glibc compat header for Irix 4, these ioctls originated
in April 1991 as a (somewhat clunky) way to preallocate space at the end
of a file on an EFS filesystem. XFS, which was released in Irix 5.3 in
December 1993, picked up these ioctls to maintain compatibility and they
were ported to Linux in the early 2000s.
Recently it was pointed out to me they still lurk in the kernel, even
though the Linux fallocate syscall supplanted the functionality a long
time ago. fstests doesn't seem to include any real functional or stress
tests for these ioctls, which means that the code quality is ... very
questionable. Most notably, it was a stale disk block exposure vector
for 21 years and nobody noticed or complained. As mature programmers
say, "If you're not testing it, it's broken."
Given all that, let's withdraw these ioctls from the XFS userspace API.
Normally we'd set a long deprecation process, but I estimate that there
aren't any real users, so let's trigger a warning in dmesg and return
-ENOTTY.
See: CVE-2021-4155
Augments: 983d8e60f508 ("xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Remove the definitions for these ioctls, since the functionality (and,
weirdly, the 32-bit compat ioctl definitions) were removed from the
kernel in November 2019.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Pull cifs updates from Steve French:
- multichannel patches mostly related to improving reconnect behavior
- minor cleanup patches
* tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix FILE_BOTH_DIRECTORY_INFO definition
cifs: move superblock magic defitions to magic.h
cifs: Fix smb311_update_preauth_hash() kernel-doc comment
cifs: avoid race during socket reconnect between send and recv
cifs: maintain a state machine for tcp/smb/tcon sessions
cifs: fix hang on cifs_get_next_mid()
cifs: take cifs_tcp_ses_lock for status checks
cifs: reconnect only the connection and not smb session where possible
cifs: add WARN_ON for when chan_count goes below minimum
cifs: adjust DebugData to use chans_need_reconnect for conn status
cifs: use the chans_need_reconnect bitmap for reconnect status
cifs: track individual channel status using chans_need_reconnect
cifs: remove redundant assignment to pointer p
|
|
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.
Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".
This patch restores the "remount" effect by calling reconfigure_single()
Fixes: d401727ea0d7 ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 2b3d04787012 ("unicode: Add utf8-data module") changed the
generated utf8data file from 'utf8data.h' to 'utf8data.c', but didn't
change the comments or the .gitignore to match.
The comments should be updated too, but at least they don't cause any
visible breakage. But the gitignore file needs changing to avoid git
complaining about untracked files.
Fixes: 2b3d04787012 ("unicode: Add utf8-data module")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
