summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2011-11-04VFS: fix statfs() automounter semantics regressionDan McGee1-1/+1
No one in their right mind would expect statfs() to not work on a automounter managed mount point. Fix it. [ I'm not sure about the "no one in their right mind" part. It's not mounted, and you didn't ask for it to be mounted. But nobody will really care, and this probably makes it match previous semantics, so.. - Linus ] This mirrors the fix made to the quota code in 815d405ceff0d69646. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-04Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-6/+8
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-nextLinus Torvalds3-1/+30
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next: Squashfs: Add an option to set dev block size to 4K
2011-11-04Merge branch 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds13-852/+347
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (25 commits) nfs: set vs_hidden on nfs4_callback_version4 (try #2) pnfs-obj: Support for RAID5 read-4-write interface. pnfs-obj: move to ore 03: Remove old raid engine pnfs-obj: move to ore 02: move to ORE pnfs-obj: move to ore 01: ore_layout & ore_components pnfs-obj: Rename objlayout_io_state => objlayout_io_res pnfs-obj: Get rid of objlayout_{alloc,free}_io_state pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist pnfs-obj: Remove redundant EOF from objlayout_io_state nfs: Remove unused variable from write.c nfs: Fix unused variable warning from file.c NFS: Remove no-op less-than-zero checks on unsigned variables. NFS: Clean up nfs4_xdr_dec_secinfo() NFS: Fix documenting comment for nfs_create_request() NFS4: fix cb_recallany decode error nfs4: serialize layoutcommit SUNRPC: remove rpcbind clients destruction on module cleanup SUNRPC: remove rpcbind clients creation during service registering NFSd: call svc rpcbind cleanup explicitly SUNRPC: cleanup service destruction ...
2011-11-04nfs: set vs_hidden on nfs4_callback_version4 (try #2)Jeff Layton1-0/+1
This service should not be registered with or unregistered from rpcbind. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-03Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds7-64/+32
* git://git.samba.org/sfrench/cifs-2.6: cifs: Assume passwords are encoded according to iocharset (try #2) CIFS: Fix the VFS brlock cache usage in posix locking case [CIFS] Update cifs version to 1.76 CIFS: Remove extra mutex_unlock in cifs_lock_add_if
2011-11-02Merge branch 'osd-devel' into nfs-for-nextTrond Myklebust192-8095/+10003
2011-11-02pnfs-obj: Support for RAID5 read-4-write interface.Boaz Harrosh1-0/+38
The ore need suplied a r4w_get_page/r4w_put_page API from Filesystem so it can get cache pages to read-into when writing parial stripes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: move to ore 03: Remove old raid engineBoaz Harrosh1-504/+0
Finally remove all the old raid engine, which is by now dead code. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: move to ore 02: move to OREBoaz Harrosh2-75/+60
In this patch we are actually moving to the ORE. (Object Raid Engine). objio_state holds a pointer to an ore_io_state. Once we have an ore_io_state at hand we can call the ore for reading/writing. We register on the done path to kick off the nfs io_done mechanism. Again for Ease of reviewing the old code is "#if 0" but is not removed so the diff command works better. The old code will be removed in the next patch. fs/exofs/Kconfig::ORE is modified to also be auto-included if PNFS_OBJLAYOUT is set. Since we now depend on ORE. (See comments in fs/exofs/Kconfig) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: move to ore 01: ore_layout & ore_componentsBoaz Harrosh1-144/+128
For Ease of reviewing I split the move to ore into 3 parts move to ore 01: ore_layout & ore_components move to ore 02: move to ORE move to ore 03: Remove old raid engine This patch modifies the objio_lseg, layout-segment level and devices and components arrays to use the ORE types. Though it will be removed soon, also the raid engine is modified to actually compile, possibly run, with the new types. So it is the same old raid engine but with some new ORE types. For Ease of reviewing, some of the old code is "#if 0" but is not removed so the diff command works better. The old code will be removed in the 3rd patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: Rename objlayout_io_state => objlayout_io_resBoaz Harrosh3-47/+48
* All instances of objlayout_io_state => objlayout_io_res * All instances of state => oir; * All instances of ol_state => oir; Big but nothing to it Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: Get rid of objlayout_{alloc,free}_io_stateBoaz Harrosh3-142/+112
This is part of moving objio_osd to use the ORE. objlayout_io_state had two functions: 1. It was used in the error reporting mechanism at layout_return. This function is kept intact. (Later patch will rename objlayout_io_state => objlayout_io_res) 2. Carrier of rw io members into the objio_read/write_paglist API. This is removed in this patch. The {r,w}data received from NFS are passed directly to the objio_{read,write}_paglist API. The io_engine is now allocating it's own IO state as part of the read/write. The minimal functionality that was part of the generic allocation is passed to the io_engine. So part of this patch is rename of: ios->ol_state.foo => ios->foo At objlayout_{read,write}_done an objlayout_io_state is passed that denotes the result of the IO. (Hence the later name change). If the IO is successful objlayout calls an objio_free_result() API immediately (Which for objio_osd causes the release of the io_state). If the IO ended in an error it is hanged onto until reported in layout_return and is released later through the objio_free_result() API. (All this is not new just renamed and cleaned) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelistBoaz Harrosh3-35/+37
objlayout driver was always returning PNFS_ATTEMPTED from it's read/write_pagelist operations. Even on error. Fix that. Start by establishing an error return API from io-engine, by not returning ssize_t (length-or-error) but returning "int" 0=OK, 0>Error. And clean up all return types in io-engine. Then if io-engine returned error return PNFS_NOT_ATTEMPTED to generic layer. (With a dprint) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02pnfs-obj: Remove redundant EOF from objlayout_io_stateBoaz Harrosh2-10/+7
The EOF calculation was done on .read_pagelist(), cached in objlayout_io_state->eof, and set in objlayout_read_done() into nfs_read_data->res.eof. So set it directly into nfs_read_data->res.eof and avoid the extra member. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02nfs: Remove unused variable from write.cRakib Mullick1-2/+1
When CONFIG_NFS=y and CONFIG_NFS_V3_{,V4}=n we get the following warning. fs/nfs/write.c: In function ‘nfs_writeback_done’: fs/nfs/write.c:1246:21: warning: unused variable ‘server’ Remove the variable 'server' to fix the above warning. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02nfs: Fix unused variable warning from file.cRakib Mullick1-6/+3
Fix the following unused variable warning. fs/nfs/file.c: In function ‘nfs_file_release’: fs/nfs/file.c:140:17: warning: unused variable ‘dentry’ fs/nfs/file.c: In function ‘nfs_file_read’: fs/nfs/file.c:237:9: warning: unused variable ‘count’ Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02Merge branch 'for-3.2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+1
* 'for-3.2' of git://linux-nfs.org/~bfields/linux: nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_access
2011-11-02Merge branch 'akpm' (Andrew's incoming - part two)Linus Torvalds7-89/+290
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
2011-11-02aio: allocate kiocbs in batchesJeff Moyer1-29/+107
In testing aio on a fast storage device, I found that the context lock takes up a fair amount of cpu time in the I/O submission path. The reason is that we take it for every I/O submitted (see __aio_get_req). Since we know how many I/Os are passed to io_submit, we can preallocate the kiocbs in batches, reducing the number of times we take and release the lock. In my testing, I was able to reduce the amount of time spent in _raw_spin_lock_irq by .56% (average of 3 runs). The command I used to test this was: aio-stress -O -o 2 -o 3 -r 8 -d 128 -b 32 -i 32 -s 16384 <dev> I also tested the patch with various numbers of events passed to io_submit, and I ran the xfstests aio group of tests to ensure I didn't break anything. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Daniel Ehrenberg <dehrenberg@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02sysctl: add support for poll()Lucas De Marchi1-0/+45
Adding support for poll() in sysctl fs allows userspace to receive notifications of changes in sysctl entries. This adds a infrastructure to allow files in sysctl fs to be pollable and implements it for hostname and domainname. [akpm@linux-foundation.org: s/declare/define/ for definitions] Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Greg KH <gregkh@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02proc: fix races against execve() of /proc/PID/fd**Vasiliy Kulikov1-43/+103
fd* files are restricted to the task's owner, and other users may not get direct access to them. But one may open any of these files and run any setuid program, keeping opened file descriptors. As there are permission checks on open(), but not on readdir() and read(), operations on the kept file descriptors will not be checked. It makes it possible to violate procfs permission model. Reading fdinfo/* may disclosure current fds' position and flags, reading directory contents of fdinfo/ and fd/ may disclosure the number of opened files by the target task. This information is not sensible per se, but it can reveal some private information (like length of a password stored in a file) under certain conditions. Used existing (un)lock_trace functions to check for ptrace_may_access(), but instead of using EPERM return code from it use EACCES to be consistent with existing proc_pid_follow_link()/proc_pid_readlink() return code. If they differ, attacker can guess what fds exist by analyzing stat() return code. Patched handlers: stat() for fd/*, stat() and read() for fdindo/*, readdir() and lookup() for fd/ and fdinfo/. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02procfs: report EISDIR when reading sysctl dirs in procPavel Emelyanov1-0/+1
On reading sysctl dirs we should return -EISDIR instead of -EINVAL. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02hfs: fix hfs_find_init() sb->ext_tree NULL ptr oopsPhillip Lougher1-5/+15
Clement Lecigne reports a filesystem which causes a kernel oops in hfs_find_init() trying to dereference sb->ext_tree which is NULL. This proves to be because the filesystem has a corrupted MDB extent record, where the extents file does not fit into the first three extents in the file record (the first blocks). In hfs_get_block() when looking up the blocks for the extent file (HFS_EXT_CNID), it fails the first blocks special case, and falls through to the extent code (which ultimately calls hfs_find_init()) which is in the process of being initialised. Hfs avoids this scenario by always having the extents b-tree fitting into the first blocks (the extents B-tree can't have overflow extents). The fix is to check at mount time that the B-tree fits into first blocks, i.e. fail if HFS_I(inode)->alloc_blocks >= HFS_I(inode)->first_blocks Note, the existing commit 47f365eb57573 ("hfs: fix oops on mount with corrupted btree extent records") becomes subsumed into this as a special case, but only for the extents B-tree (HFS_EXT_CNID), it is perfectly acceptable for the catalog B-Tree file to grow beyond three extents, with the remaining extent descriptors in the extents overfow. This fixes CVE-2011-2203 Reported-by: Clement LECIGNE <clement.lecigne@netasq.com> Signed-off-by: Phillip Lougher <plougher@redhat.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02isofs: add readpages supportNamjae Jeon1-1/+9
Use mpage_readpages() instead of multiple calls to isofs_readpage() to reduce the CPU utilization and make performance higher. Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02ramfs: remove module leftoversRichard Weinberger1-10/+0
Since ramfs is hard-selected to "y", the module leftovers make no sense. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02binfmt_elf: fix PIE execution with randomization disabledJiri Kosina1-1/+10
The case of address space randomization being disabled in runtime through randomize_va_space sysctl is not treated properly in load_elf_binary(), resulting in SIGKILL coming at exec() time for certain PIE-linked binaries in case the randomization has been disabled at runtime prior to calling exec(). Handle the randomize_va_space == 0 case the same way as if we were not supporting .text randomization at all. Based on original patch by H.J. Lu and Josh Boyer. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: H.J. Lu <hongjiu.lu@intel.com> Cc: <stable@kernel.org> Tested-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02Merge branch 'for-next' of ↵Linus Torvalds100-221/+262
git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue: vfs: add d_prune dentry operation vfs: protect i_nlink filesystems: add set_nlink() filesystems: add missing nlink wrappers logfs: remove unnecessary nlink setting ocfs2: remove unnecessary nlink setting jfs: remove unnecessary nlink setting hypfs: remove unnecessary nlink setting vfs: ignore error on forced remount readlinkat: ensure we return ENOENT for the empty pathname for normal lookups vfs: fix dentry leak in simple_fill_super()
2011-11-02Squashfs: Add an option to set dev block size to 4KPhillip Lougher3-1/+30
This commit adds an option to set the device block size used to 4K. By default Squashfs sets the device block size (sb_min_blocksize) to 1K or the smallest block size supported by the block device (if larger). This, because blocks are packed together and unaligned in Squashfs, should reduce latency. This, however, gives poor performance on MTD NAND devices where the optimal I/O size is 4K (even though the devices can support smaller block sizes). Using a 4K device block size may also improve overall I/O performance for some file access patterns (e.g. sequential accesses of files in filesystem order) on all media. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-11-02Merge branch 'for_linus' of ↵Linus Torvalds26-1159/+2328
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (97 commits) jbd2: Unify log messages in jbd2 code jbd/jbd2: validate sb->s_first in journal_get_superblock() ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled ext4: fix a typo in struct ext4_allocation_context ext4: Don't normalize an falloc request if it can fit in 1 extent. ext4: remove comments about extent mount option in ext4_new_inode() ext4: let ext4_discard_partial_buffers handle unaligned range correctly ext4: return ENOMEM if find_or_create_pages fails ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock() ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten ext4: optimize locking for end_io extent conversion ext4: remove unnecessary call to waitqueue_active() ext4: Use correct locking for ext4_end_io_nolock() ext4: fix race in xattr block allocation path ext4: trace punch_hole correctly in ext4_ext_map_blocks ext4: clean up AGGRESSIVE_TEST code ext4: move variables to their scope ext4: fix quota accounting during migration ext4: migrate cleanup ...
2011-11-02Merge branch 'for_linus' of ↵Linus Torvalds21-333/+258
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Cleanup metadata flags handling udf: Skip mirror metadata FE loading when metadata FE is ok ext3: Allow quota file use root reservation udf: Remove web reference from UDF MAINTAINERS entry quota: Drop path reference on error exit from quotactl udf: Neaten udf_debug uses udf: Neaten logging output, use vsprintf extension %pV udf: Convert printks to pr_<level> udf: Rename udf_warning to udf_warn udf: Rename udf_error to udf_err udf: Promote some debugging messages to udf_error ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY. udf: Add readpages support for udf. ext3/balloc.c: local functions should be static ext2: fix the outdated comment in ext2_nfs_get_inode() ext3: remove deprecated oldalloc fs/ext3/balloc.c: delete useless initialization fs/ext2/balloc.c: delete useless initialization ext3: fix message in ext3_remount for rw-remount case ext3: Remove i_mutex from ext3_sync_file() Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds1-1/+0
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02um: kill useless include of user.hAl Viro1-1/+0
everything in USER_OBJ gets it via -include user.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02vfs: add d_prune dentry operationSage Weil1-5/+35
This adds a d_prune dentry operation that is called by the VFS prior to pruning (i.e. unhashing and killing) a hashed dentry from the dcache. Wrap dentry_lru_del() and use the new _prune() helper in the cases where we are about to unhash and kill the dentry. This will be used by Ceph to maintain a flag indicating whether the complete contents of a directory are contained in the dcache, allowing it to satisfy lookups and readdir without addition server communication. Renumber a few DCACHE_* #defines to group DCACHE_OP_PRUNE with the other DCACHE_OP_ bits. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02vfs: protect i_nlinkMiklos Szeredi1-1/+1
Prevent direct modification of i_nlink by making it const and adding a non-const __i_nlink alias. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02filesystems: add set_nlink()Miklos Szeredi78-146/+148
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi29-55/+52
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-11-02logfs: remove unnecessary nlink settingMiklos Szeredi1-1/+0
alloc_inode() initializes i_nlink to 1. Remove unnecessary re-initialization. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Joern Engel <joern@logfs.org> CC: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02ocfs2: remove unnecessary nlink settingMiklos Szeredi1-2/+0
alloc_inode() initializes i_nlink to 1. Remove unnecessary re-initialization. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Joel Becker <jlbec@evilplan.org> CC: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02jfs: remove unnecessary nlink settingMiklos Szeredi1-1/+0
alloc_inode() initializes i_nlink to 1. Remove unnecessary re-initialization. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02vfs: ignore error on forced remountMiklos Szeredi1-2/+7
On emergency remount we want to force MS_RDONLY on the super block even if ->remount_fs() failed for some reason. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02readlinkat: ensure we return ENOENT for the empty pathname for normal lookupsAndy Whitcroft2-7/+16
Since the commit below which added O_PATH support to the *at() calls, the error return for readlink/readlinkat for the empty pathname has switched from ENOENT to EINVAL: commit 65cfc6722361570bfe255698d9cd4dccaf47570d Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sun Mar 13 15:56:26 2011 -0400 readlinkat(), fchownat() and fstatat() with empty relative pathnames This is both unexpected for userspace and makes readlink/readlinkat inconsistant with all other interfaces; and inconsistant with our stated return for these pathnames. As the readlinkat call does not have a flags parameter we cannot use the AT_EMPTY_PATH approach used in the other calls. Therefore expose whether the original path is infact entry via a new user_path_at_empty() path lookup function. Use this to determine whether to default to EINVAL or ENOENT for failures. Addresses http://bugs.launchpad.net/bugs/817187 [akpm@linux-foundation.org: remove unused getname_flags()] Signed-off-by: Andy Whitcroft <apw@canonical.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02vfs: fix dentry leak in simple_fill_super()Konstantin Khlebnikov1-1/+3
put dentry if inode allocation failed, d_genocide() cannot release it Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-01jbd2: Unify log messages in jbd2 codeEryu Guan4-47/+47
Some jbd2 code prints out kernel messages with "JBD2: " prefix, at the same time other jbd2 code prints with "JBD: " prefix. Unify the prefix to "JBD2: ". Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01jbd/jbd2: validate sb->s_first in journal_get_superblock()Eryu Guan2-0/+16
I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3 image has s_first = 0 in journal superblock, and the 0 is passed to journal->j_head in journal_reset(), then to blocknr in cleanup_journal_tail(), in the end the J_ASSERT failed. So validate s_first after reading journal superblock from disk in journal_get_superblock() to ensure s_first is valid. The following script could reproduce it: fstype=ext3 blocksize=1024 img=$fstype.img offset=0 found=0 magic="c0 3b 39 98" dd if=/dev/zero of=$img bs=1M count=8 mkfs -t $fstype -b $blocksize -F $img filesize=`stat -c %s $img` while [ $offset -lt $filesize ] do if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then echo "Found journal: $offset" found=1 break fi offset=`echo "$offset+$blocksize" | bc` done if [ $found -ne 1 ];then echo "Magic \"$magic\" not found" exit 1 fi dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1 mkdir -p ./mnt mount -o loop $img ./mnt Cc: Jan Kara <jack@suse.cz> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01ext4: let ext4_ext_rm_leaf work with EXT_DEBUG definedYongqiang Yang1-1/+1
The variable 'block' is removed by commit 750c9c47, so use the replacement ex_ee_block instead. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabledYongqiang Yang1-8/+8
This patch fixes a syntax error which omits a comma. Besides this, logical block number is unsigend 32 bits, so printk should use %u instead %d. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_accessBenny Halevy1-1/+1
Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-11-01Merge branch 'pstore' of ↵Linus Torvalds3-26/+109
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux * 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: make pstore write function return normal success/fail value pstore: change mutex locking to spin_locks pstore: defer inserting OOPS entries into pstore
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 21:52:55 +0000