summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2019-04-07Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: - Fixups for the pf/pcd queue handling (YueHaibing) - Revert of the three direct issue changes as they have been proven to cause an issue with dm-mpath (Bart) - Plug rq_count reset fix (Dongli) - io_uring double free in fileset registration error handling (me) - Make null_blk handle bad numa node passed in (John) - BFQ ifdef fix (Konstantin) - Flush queue leak fix (Shenghui) - Plug trace fix (Yufen) * tag 'for-linus-20190407' of git://git.kernel.dk/linux-block: xsysace: Fix error handling in ace_setup null_blk: prevent crash from bad home_node value block: Revert v5.0 blk_mq_request_issue_directly() changes paride/pcd: Fix potential NULL pointer dereference and mem leak blk-mq: do not reset plug->rq_count before the list is sorted paride/pf: Fix potential NULL pointer dereference io_uring: fix double free in case of fileset regitration failure blk-mq: add trace block plug and unplug for multiple queues block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
2019-04-06fs: stream_open - opener for stream-like files so that read and write can ↵Kirill Smelkov2-2/+21
run simultaneously without deadlock Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added locking for file.f_pos access and in particular made concurrent read and write not possible - now both those functions take f_pos lock for the whole run, and so if e.g. a read is blocked waiting for data, write will deadlock waiting for that read to complete. This caused regression for stream-like files where previously read and write could run simultaneously, but after that patch could not do so anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes to /proc/xen/xenbus") which fixes such regression for particular case of /proc/xen/xenbus. The patch that added f_pos lock in 2014 did so to guarantee POSIX thread safety for read/write/lseek and added the locking to file descriptors of all regular files. In 2014 that thread-safety problem was not new as it was already discussed earlier in 2006. However even though 2006'th version of Linus's patch was adding f_pos locking "only for files that are marked seekable with FMODE_LSEEK (thus avoiding the stream-like objects like pipes and sockets)", the 2014 version - the one that actually made it into the tree as 9c225f2655e3 - is doing so irregardless of whether a file is seekable or not. See https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/ https://lwn.net/Articles/180387 https://lwn.net/Articles/180396 for historic context. The reason that it did so is, probably, that there are many files that are marked non-seekable, but e.g. their read implementation actually depends on knowing current position to correctly handle the read. Some examples: kernel/power/user.c snapshot_read fs/debugfs/file.c u32_array_read fs/fuse/control.c fuse_conn_waiting_read + ... drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read arch/s390/hypfs/inode.c hypfs_read_iter ... Despite that, many nonseekable_open users implement read and write with pure stream semantics - they don't depend on passed ppos at all. And for those cases where read could wait for something inside, it creates a situation similar to xenbus - the write could be never made to go until read is done, and read is waiting for some, potentially external, event, for potentially unbounded time -> deadlock. Besides xenbus, there are 14 such places in the kernel that I've found with semantic patch (see below): drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write() drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write() drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write() drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write() net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write() drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write() drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write() drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write() net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write() drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write() drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write() drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write() drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write() drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write() In addition to the cases above another regression caused by f_pos locking is that now FUSE filesystems that implement open with FOPEN_NONSEEKABLE flag, can no longer implement bidirectional stream-like files - for the same reason as above e.g. read can deadlock write locking on file.f_pos in the kernel. FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse: implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and write routines not depending on current position at all, and with both read and write being potentially blocking operations: See https://github.com/libfuse/osspd https://lwn.net/Articles/308445 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510 Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as "somewhat pipe-like files ..." with read handler not using offset. However that test implements only read without write and cannot exercise the deadlock scenario: https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216 I've actually hit the read vs write deadlock for real while implementing my FUSE filesystem where there is /head/watch file, for which open creates separate bidirectional socket-like stream in between filesystem and its user with both read and write being later performed simultaneously. And there it is semantically not easy to split the stream into two separate read-only and write-only channels: https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169 Let's fix this regression. The plan is: 1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS - doing so would break many in-kernel nonseekable_open users which actually use ppos in read/write handlers. 2. Add stream_open() to kernel to open stream-like non-seekable file descriptors. Read and write on such file descriptors would never use nor change ppos. And with that property on stream-like files read and write will be running without taking f_pos lock - i.e. read and write could be running simultaneously. 3. With semantic patch search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. 4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via steam_open if that bit is present in filesystem open reply. It was tempting to change fs/fuse/ open handler to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. 5. Add stream_open and FOPEN_STREAM handling to stable kernels starting from v3.14+ (the kernel where 9c225f2655 first appeared). This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in their open handler and this way avoid the deadlock on all kernel versions. This should work because fs/fuse/ ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. This patch adds stream_open, converts /proc/xen/xenbus to it and adds semantic patch to automatically locate in-kernel places that are either required to be converted due to read vs write deadlock, or that are just safe to be converted because read and write do not use ppos and there are no other funky methods in file_operations. Regarding semantic patch I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-6/+14
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kernel/sysctl.c: fix out-of-bounds access when setting file-max mm/util.c: fix strndup_user() comment sh: fix multiple function definition build errors MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM mm: writeback: use exact memcg dirty counts psi: clarify the units used in pressure files mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd() hugetlbfs: fix memory leak for resv_map mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX() lib/lzo: fix bugs for very short or empty input include/linux/bitrev.h: fix constant bitrev kmemleak: powerpc: skip scanning holes in the .bss section lib/string.c: implement a basic bcmp
2019-04-05hugetlbfs: fix memory leak for resv_mapMike Kravetz1-6/+14
When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Yufen Yu <yuyufen@huawei.com> Suggested-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05Merge tag 'trace-5.1-rc3' of ↵Linus Torvalds1-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull syscall-get-arguments cleanup and fixes from Steven Rostedt: "Andy Lutomirski approached me to tell me that the syscall_get_arguments() implementation in x86 was horrible and gcc certainly gets it wrong. He said that since the tracepoints only pass in 0 and 6 for i and n repectively, it should be optimized for that case. Inspecting the kernel, I discovered that all users pass in 0 for i and only one file passing in something other than 6 for the number of arguments. That code happens to be my own code used for the special syscall tracing. That can easily be converted to just using 0 and 6 as well, and only copying what is needed. Which is probably the faster path anyway for that case. Along the way, a couple of real fixes came from this as the syscall_get_arguments() function was incorrect for csky and riscv. x86 has been optimized to for the new interface that removes the variable number of arguments, but the other architectures could still use some loving and take more advantage of the simpler interface" * tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: syscalls: Remove start and number from syscall_set_arguments() args syscalls: Remove start and number from syscall_get_arguments() args csky: Fix syscall_get_arguments() and syscall_set_arguments() riscv: Fix syscall_get_arguments() and syscall_set_arguments() tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments() ptrace: Remove maxargs from task_current_syscall()
2019-04-04ptrace: Remove maxargs from task_current_syscall()Steven Rostedt (Red Hat)1-8/+9
task_current_syscall() has a single user that passes in 6 for maxargs, which is the maximum arguments that can be used to get system calls from syscall_get_arguments(). Instead of passing in a number of arguments to grab, just get 6 arguments. The args argument even specifies that it's an array of 6 items. This will also allow changing syscall_get_arguments() to not get a variable number of arguments, but always grab 6. Linus also suggested not passing in a bunch of arguments to task_current_syscall() but to instead pass in a pointer to a structure, and just fill the structure. struct seccomp_data has almost all the parameters that is needed except for the stack pointer (sp). As seccomp_data is part of uapi, and I'm afraid to change it, a new structure was created "syscall_info", which includes seccomp_data and adds the "sp" field. Link: http://lkml.kernel.org/r/20161107213233.466776454@goodmis.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-03io_uring: fix double free in case of fileset regitration failureJens Axboe1-0/+1
Will Deacon reported the following KASAN complaint: [ 149.890370] ================================================================== [ 149.891266] BUG: KASAN: double-free or invalid-free in io_sqe_files_unregister+0xa8/0x140 [ 149.892218] [ 149.892411] CPU: 113 PID: 3974 Comm: io_uring_regist Tainted: G B 5.1.0-rc3-00012-g40b114779944 #3 [ 149.893623] Hardware name: linux,dummy-virt (DT) [ 149.894169] Call trace: [ 149.894539] dump_backtrace+0x0/0x228 [ 149.895172] show_stack+0x14/0x20 [ 149.895747] dump_stack+0xe8/0x124 [ 149.896335] print_address_description+0x60/0x258 [ 149.897148] kasan_report_invalid_free+0x78/0xb8 [ 149.897936] __kasan_slab_free+0x1fc/0x228 [ 149.898641] kasan_slab_free+0x10/0x18 [ 149.899283] kfree+0x70/0x1f8 [ 149.899798] io_sqe_files_unregister+0xa8/0x140 [ 149.900574] io_ring_ctx_wait_and_kill+0x190/0x3c0 [ 149.901402] io_uring_release+0x2c/0x48 [ 149.902068] __fput+0x18c/0x510 [ 149.902612] ____fput+0xc/0x18 [ 149.903146] task_work_run+0xf0/0x148 [ 149.903778] do_notify_resume+0x554/0x748 [ 149.904467] work_pending+0x8/0x10 [ 149.905060] [ 149.905331] Allocated by task 3974: [ 149.905934] __kasan_kmalloc.isra.0.part.1+0x48/0xf8 [ 149.906786] __kasan_kmalloc.isra.0+0xb8/0xd8 [ 149.907531] kasan_kmalloc+0xc/0x18 [ 149.908134] __kmalloc+0x168/0x248 [ 149.908724] __arm64_sys_io_uring_register+0x2b8/0x15a8 [ 149.909622] el0_svc_common+0x100/0x258 [ 149.910281] el0_svc_handler+0x48/0xc0 [ 149.910928] el0_svc+0x8/0xc [ 149.911425] [ 149.911696] Freed by task 3974: [ 149.912242] __kasan_slab_free+0x114/0x228 [ 149.912955] kasan_slab_free+0x10/0x18 [ 149.913602] kfree+0x70/0x1f8 [ 149.914118] __arm64_sys_io_uring_register+0xc2c/0x15a8 [ 149.915009] el0_svc_common+0x100/0x258 [ 149.915670] el0_svc_handler+0x48/0xc0 [ 149.916317] el0_svc+0x8/0xc [ 149.916817] [ 149.917101] The buggy address belongs to the object at ffff8004ce07ed00 [ 149.917101] which belongs to the cache kmalloc-128 of size 128 [ 149.919197] The buggy address is located 0 bytes inside of [ 149.919197] 128-byte region [ffff8004ce07ed00, ffff8004ce07ed80) [ 149.921142] The buggy address belongs to the page: [ 149.921953] page:ffff7e0013381f00 count:1 mapcount:0 mapping:ffff800503417c00 index:0x0 compound_mapcount: 0 [ 149.923595] flags: 0x1ffff00000010200(slab|head) [ 149.924388] raw: 1ffff00000010200 dead000000000100 dead000000000200 ffff800503417c00 [ 149.925706] raw: 0000000000000000 0000000080400040 00000001ffffffff 0000000000000000 [ 149.927011] page dumped because: kasan: bad access detected [ 149.927956] [ 149.928224] Memory state around the buggy address: [ 149.929054] ffff8004ce07ec00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 149.930274] ffff8004ce07ec80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 149.931494] >ffff8004ce07ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 149.932712] ^ [ 149.933281] ffff8004ce07ed80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 149.934508] ffff8004ce07ee00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 149.935725] ================================================================== which is due to a failure in registrering a fileset. This frees the ctx->user_files pointer, but doesn't clear it. When the io_uring instance is later freed through the normal channels, we free this pointer again. At this point it's invalid. Ensure we clear the pointer when we free it for the error case. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.Ronnie Sahlberg1-5/+3
It only means that we do not have a valid cached value for the file_all_info structure. CC: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-04-01SMB3: Allow persistent handle timeout to be configurable on mountSteve French5-5/+53
Reconnecting after server or network failure can be improved (to maintain availability and protect data integrity) by allowing the client to choose the default persistent (or resilient) handle timeout in some use cases. Today we default to 0 which lets the server pick the default timeout (usually 120 seconds) but this can be problematic for some workloads. Add the new mount parameter to cifs.ko for SMB3 mounts "handletimeout" which enables the user to override the default handle timeout for persistent (mount option "persistenthandles") or resilient handles (mount option "resilienthandles"). Maximum allowed is 16 minutes (960000 ms). Units for the timeout are expressed in milliseconds. See section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol specification for more information. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org>
2019-04-01smb3: Fix enumerating snapshots to AzureSteve French4-28/+58
Some servers (see MS-SMB2 protocol specification section 3.3.5.15.1) expect that the FSCTL enumerate snapshots is done twice, with the first query having EXACTLY the minimum size response buffer requested (16 bytes) which refreshes the snapshot list (otherwise that and subsequent queries get an empty list returned). So had to add code to set the maximum response size differently for the first snapshot query (which gets the size needed for the second query which contains the actual list of snapshots). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> # 4.19+
2019-04-01cifs: fix kref underflow in close_shroot()Ronnie Sahlberg1-9/+7
Fix a bug where we used to not initialize the cached fid structure at all in open_shroot() if the open was successful but we did not get a lease. This would leave the structure uninitialized and later when we close the handle we would in close_shroot() try to kref_put() an uninitialized refcount. Fix this by always initializing this structure if the open was successful but only do the extra get() if we got a lease. This extra get() is only used to hold the structure until we get a lease break from the server at which point we will kref_put() it during lease processing. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-04-01Merge branch 'work.aio' of ↵Linus Torvalds1-188/+150
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio race fixes and cleanups from Al Viro. The aio code had more issues with error handling and races with the aio completing at just the right (wrong) time along with freeing the file descriptor when another thread closes the file. Just a couple of these commits are the actual fixes: the others are cleanups to either make the fixes simpler, or to make the code legible and understandable enough that we hope there's no more fundamental races hiding. * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: move sanity checks and request allocation to io_submit_one() deal with get_reqs_available() in aio_get_req() itself aio: move dropping ->ki_eventfd into iocb_destroy() make aio_read()/aio_write() return int Fix aio_poll() races aio: store event at final iocb_put() aio: keep io_event in aio_kiocb aio: fold lookup_kiocb() into its sole caller pin iocb through aio.
2019-04-01Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds4-13/+14
Pull symlink fixes from Al Viro: "The ceph fix is already in mainline, Daniel's bpf fix is in bpf tree (1da6c4d9140c "bpf: fix use after free in bpf_evict_inode"), the rest is in here" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: debugfs: fix use-after-free on symlink traversal ubifs: fix use-after-free on symlink traversal jffs2: fix use-after-free on symlink traversal
2019-04-01debugfs: fix use-after-free on symlink traversalAl Viro1-4/+9
symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-01ubifs: fix use-after-free on symlink traversalAl Viro1-3/+1
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-01jffs2: fix use-after-free on symlink traversalAl Viro2-6/+4
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-21/+34
Merge misc fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links fs: fs_parser: fix printk format warning checkpatch: add %pt as a valid vsprintf extension mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate drivers/block/zram/zram_drv.c: fix idle/writeback string compare mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate() mm/memory_hotplug.c: fix notification in offline error path ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK fs/proc/kcore.c: make kcore_modules static include/linux/list.h: fix list_is_first() kernel-doc mm/debug.c: fix __dump_page when mapping->host is not set mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified include/linux/hugetlb.h: convert to use vm_fault_t iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging mm: add support for kmem caches in DMA32 zone ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock mm/hotplug: fix offline undo_isolate_page_range() fs/open.c: allow opening only regular files during execve() mailmap: add Changbin Du mm/debug.c: add a cast to u64 for atomic64_read() ...
2019-03-29Merge tag 'for-linus-20190329' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+24
Pull block fixes from Jens Axboe: "Small set of fixes that should go into this series. This contains: - compat signal mask fix for io_uring (Arnd) - EAGAIN corner case for direct vs buffered writes for io_uring (Roman) - NVMe pull request from Christoph with various little fixes - sbitmap ws_active fix, which caused a perf regression for shared tags (me) - sbitmap bit ordering fix (Ming) - libata on-stack DMA fix (Raymond)" * tag 'for-linus-20190329' of git://git.kernel.dk/linux-block: nvmet: fix error flow during ns enable nvmet: fix building bvec from sg list nvme-multipath: relax ANA state check nvme-tcp: fix an endianess miss-annotation libata: fix using DMA buffers on stack io_uring: offload write to async worker in case of -EAGAIN sbitmap: order READ/WRITE freed instance and setting clear bit blk-mq: fix sbitmap ws_active for shared tags io_uring: fix big-endian compat signal mask handling blk-mq: update comment for blk_mq_hctx_has_pending() blk-mq: use blk_mq_put_driver_tag() to put tag
2019-03-29Merge tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-clientLinus Torvalds1-1/+1
Pull ceph fixes from Ilya Dryomov: "A patch to avoid choking on multipage bvecs in the messenger and a small use-after-free fix" * tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client: ceph: fix use-after-free on symlink traversal libceph: fix breakage caused by multipage bvecs
2019-03-29Merge tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds5-17/+49
Pull xfs fixes from Darrick Wong: "Here are a few fixes for some corruption bugs and uninitialized variable problems. The few patches here have gone through a few days worth of fstest runs with no new problems observed. Changes since last update: - Fix a bunch of static checker complaints about uninitialized variables and insufficient range checks. - Avoid a crash when incore extent map data are corrupt. - Disallow FITRIM when we haven't recovered the log and know the metadata are stale. - Fix a data corruption when doing unaligned overlapping dio writes" * tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: serialize unaligned dio writes against all other dio writes xfs: prohibit fstrim in norecovery mode xfs: always init bma in xfs_bmapi_write xfs: fix btree scrub checking with regards to root-in-inode xfs: dabtree scrub needs to range-check level xfs: don't trip over uninitialized buffer on extent read of corrupted inode
2019-03-29fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_linksYueHaibing1-1/+2
Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs: fs_parser: fix printk format warningRandy Dunlap1-1/+1
Fix printk format warning (seen on i386 builds) by using ptrdiff format specifier (%t): fs/fs_parser.c:413:6: warning: format `%lu' expects argument of type `long unsigned int', but argument 3 has type `int' [-Wformat=] Link: http://lkml.kernel.org/r/19432668-ffd3-fbb2-af4f-1c8e48f6cc81@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs/proc/kcore.c: make kcore_modules staticYueHaibing1-1/+1
Fix sparse warning: fs/proc/kcore.c:591:19: warning: symbol 'kcore_modules' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190320135417.13272-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Omar Sandoval <osandov@fb.com> Cc: James Morse <james.morse@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lockDarrick J. Wong1-18/+24
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that we always grab cluster locks in order of increasing inode number. Unfortunately, we forget to swap the inode record buffer head pointers when we've done this, which leads to incorrect bookkeepping when we're trying to make the two inodes have the same refcount tree. This has the effect of causing filesystem shutdowns if you're trying to reflink data from inode 100 into inode 97, where inode 100 already has a refcount tree attached and inode 97 doesn't. The reflink code decides to copy the refcount tree pointer from 100 to 97, but uses inode 97's inode record to open the tree root (which it doesn't have) and blows up. This issue causes filesystem shutdowns and metadata corruption! Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia Fixes: 29ac8e856cb369 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29fs/open.c: allow opening only regular files during execve()Tetsuo Handa1-0/+6
syzbot is hitting lockdep warning [1] due to trying to open a fifo during an execve() operation. But we don't need to open non regular files during an execve() operation, for all files which we will need are the executable file itself and the interpreter programs like /bin/sh and ld-linux.so.2 . Since the manpage for execve(2) says that execve() returns EACCES when the file or a script interpreter is not a regular file, and the manpage for uselib(2) says that uselib() can return EACCES, and we use FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non regular file is requested with FMODE_EXEC set. Since this deadlock followed by khungtaskd warnings is trivially reproducible by a local unprivileged user, and syzbot's frequent crash due to this deadlock defers finding other bugs, let's workaround this deadlock until we get a chance to find a better solution. [1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com> Fixes: 8924feff66f35fe2 ("splice: lift pipe_lock out of splice_to_pipe()") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-28afs: Fix StoreData op marshallingDavid Howells2-4/+4
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls generated by ->setattr() ops for the purpose of expanding a file is incorrect due to older documentation incorrectly describing the way the RPC 'FileLength' parameter is meant to work. The older documentation says that this is the length the file is meant to end up at the end of the operation; however, it was never implemented this way in any of the servers, but rather the file is truncated down to this before the write operation is effected, and never expanded to it (and, indeed, it was renamed to 'TruncPos' in 2014). Fix this by setting the position parameter to the new file length and doing a zero-lengh write there. The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file it then mmaps. This can be tested by giving the following test program a filename in an AFS directory: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { char *p; int fd; if (argc != 2) { fprintf(stderr, "Format: test-trunc-mmap <file>\n"); exit(2); } fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC); if (fd < 0) { perror(argv[1]); exit(1); } if (ftruncate(fd, 0x140008) == -1) { perror("ftruncate"); exit(1); } p = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } p[0] = 'a'; if (munmap(p, 4096) < 0) { perror("munmap"); exit(1); } if (close(fd) < 0) { perror("close"); exit(1); } exit(0); } Fixes: 31143d5d515e ("AFS: implement basic file write support") Reported-by: Jonathan Billings <jsbillin@umich.edu> Tested-by: Jonathan Billings <jsbillin@umich.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-27ceph: fix use-after-free on symlink traversalAl Viro1-1/+1
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds4-7/+8
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
2019-03-26Merge tag 'for-5.1-rc2-tag' of ↵Linus Torvalds6-21/+72
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fsync fixes: i_size for truncate vs fsync, dio vs buffered during snapshotting, remove complicated but incomplete assertion - removed excessive warnigs, misreported device stats updates - fix raid56 page mapping for 32bit arch - fixes reported by static analyzer * tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix assertion failure on fsync with NO_HOLES enabled btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks btrfs: raid56: properly unmap parity page in finish_parity_scrub() btrfs: don't report readahead errors and don't update statistics Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes btrfs: remove WARN_ON in log_dir_items Btrfs: fix incorrect file size after shrinking truncate and fsync
2019-03-26xfs: serialize unaligned dio writes against all other dio writesBrian Foster1-10/+17
XFS applies more strict serialization constraints to unaligned direct writes to accommodate things like direct I/O layer zeroing, unwritten extent conversion, etc. Unaligned submissions acquire the exclusive iolock and wait for in-flight dio to complete to ensure multiple submissions do not race on the same block and cause data corruption. This generally works in the case of an aligned dio followed by an unaligned dio, but the serialization is lost if I/Os occur in the opposite order. If an unaligned write is submitted first and immediately followed by an overlapping, aligned write, the latter submits without the typical unaligned serialization barriers because there is no indication of an unaligned dio still in-flight. This can lead to unpredictable results. To provide proper unaligned dio serialization, require that such direct writes are always the only dio allowed in-flight at one time for a particular inode. We already acquire the exclusive iolock and drain pending dio before submitting the unaligned dio. Wait once more after the dio submission to hold the iolock across the I/O and prevent further submissions until the unaligned I/O completes. This is heavy handed, but consistent with the current pre-submission serialization for unaligned direct writes. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-03-25io_uring: offload write to async worker in case of -EAGAINRoman Penyaev1-1/+15
In case of direct write -EAGAIN will be returned if page cache was previously populated. To avoid immediate completion of a request with -EAGAIN error write has to be offloaded to the async worker, like io_read() does. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25io_uring: fix big-endian compat signal mask handlingArnd Bergmann1-1/+9
On big-endian architectures, the signal masks are differnet between 32-bit and 64-bit tasks, so we have to use a different function for reading them from user space. io_cqring_wait() initially got this wrong, and always interprets this as a native structure. This is ok on x86 and most arm64, but not on s390, ppc64be, mips64be, sparc64 and parisc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25xfs: prohibit fstrim in norecovery modeDarrick J. Wong1-0/+8
The xfs fstrim implementation uses the free space btrees to find free space that can be discarded. If we haven't recovered the log, the bnobt will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-03-25locks: wake any locks blocked on request before deadlock checkJeff Layton1-0/+5
Andreas reported that he was seeing the tdbtorture test fail in some cases with -EDEADLCK when it wasn't before. Some debugging showed that deadlock detection was sometimes discovering the caller's lock request itself in a dependency chain. While we remove the request from the blocked_lock_hash prior to reattempting to acquire it, any locks that are blocked on that request will still be present in the hash and will still have their fl_blocker pointer set to the current request. This causes posix_locks_deadlock to find a deadlock dependency chain when it shouldn't, as a lock request cannot block itself. We are going to end up waking all of those blocked locks anyway when we go to reinsert the request back into the blocked_lock_hash, so just do it prior to checking for deadlocks. This ensures that any lock blocked on the current request will no longer be part of any blocked request chain. URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975 Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Cc: stable@vger.kernel.org Reported-by: Andreas Schneider <asn@redhat.com> Signed-off-by: Neil Brown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2019-03-24Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds7-59/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for 5.1" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: prohibit fstrim in norecovery mode ext4: cleanup bh release code in ext4_ind_remove_space() ext4: brelse all indirect buffer in ext4_ind_remove_space() ext4: report real fs size after failed resize ext4: add missing brelse() in add_new_gdb_meta_bg() ext4: remove useless ext4_pin_inode() ext4: avoid panic during forced reboot ext4: fix data corruption caused by unaligned direct AIO ext4: fix NULL pointer dereference while journal is aborted
2019-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Prevent potential NULL pointer dereferences in the HPET and HyperV code - Exclude the GART aperture from /proc/kcore to prevent kernel crashes on access - Use the correct macros for Cyrix I/O on Geode processors - Remove yet another kernel address printk leak - Announce microcode reload completion as requested by quite some people. Microcode loading has become popular recently. - Some 'Make Clang' happy fixlets - A few cleanups for recently added code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/gart: Exclude GART aperture from kcore x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error x86/mm/pti: Make local symbols static x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors x86/microcode: Announce reload operation's completion x86/hyperv: Prevent potential NULL pointer dereference x86/hpet: Prevent potential NULL pointer dereference x86/lib: Fix indentation issue, remove extra tab x86/boot: Restrict header scope to make Clang happy x86/mm: Don't leak kernel addresses x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
2019-03-24Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-70/+102
Pull smb3 fixes from Steve French: - two fixes for stable for guest mount problems with smb3.1.1 - two fixes for crediting (SMB3 flow control) on resent requests - a byte range lock leak fix - two fixes for incorrect rc mappings * tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number SMB3: Fix SMB3.1.1 guest mounts to Samba cifs: Fix slab-out-of-bounds when tracing SMB tcon cifs: allow guest mounts to work for smb3.11 fix incorrect error code mapping for OBJECTID_NOT_FOUND cifs: fix that return -EINVAL when do dedupe operation CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN
2019-03-23Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-blockLinus Torvalds3-233/+230
Pull io_uring fixes and improvements from Jens Axboe: "The first five in this series are heavily inspired by the work Al did on the aio side to fix the races there. The last two re-introduce a feature that was in io_uring before it got merged, but which I pulled since we didn't have a good way to have BVEC iters that already have a stable reference. These aren't necessarily related to block, it's just how io_uring pins fixed buffers" * tag 'io_uring-20190323' of git://git.kernel.dk/linux-block: block: add BIO_NO_PAGE_REF flag iov_iter: add ITER_BVEC_FLAG_NO_REF flag io_uring: mark me as the maintainer io_uring: retry bulk slab allocs as single allocs io_uring: fix poll races io_uring: fix fget/fput handling io_uring: add prepped flag io_uring: make io_read/write return an integer io_uring: use regular request ref counts
2019-03-23ext4: prohibit fstrim in norecovery modeDarrick J. Wong1-0/+7
The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-23pNFS/flexfiles: Fix layoutstats handling during read failoversTrond Myklebust1-1/+4
During a read failover, we may end up changing the value of the pgio_mirror_idx, so make sure that we record the layout stats before that update. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23NFS: Fix a typo in nfs_init_timeout_values()Trond Myklebust1-1/+1
Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23ext4: cleanup bh release code in ext4_ind_remove_space()zhangyi (F)1-25/+22
Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-23ext4: brelse all indirect buffer in ext4_ind_remove_space()zhangyi (F)1-4/+8
All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
2019-03-23x86/gart: Exclude GART aperture from kcoreKairui Song1-0/+27
On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash. vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory. Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet. Suggested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Dave Young <dyoung@redhat.com> Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
2019-03-22cifs: update internal module version numberSteve French1-1/+1
To 2.19 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22SMB3: Fix SMB3.1.1 guest mounts to SambaSteve French1-1/+4
Workaround problem with Samba responses to SMB3.1.1 null user (guest) mounts. The server doesn't set the expected flag in the session setup response so we have to do a similar check to what is done in smb3_validate_negotiate where we also check if the user is a null user (but not sec=krb5 since username might not be passed in on mount for Kerberos case). Note that the commit below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for cases where there is no user (even if server forgets to set the flag in the response) since we don't have anything useful to sign with. This is especially important now that the more secure SMB3.1.1 protocol is in the default dialect list. An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed the guest mounts to Windows. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22cifs: Fix slab-out-of-bounds when tracing SMB tconPaulo Alcantara (SUSE)1-3/+3
This patch fixes the following KASAN report: [ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180 [ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812 [ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62 [ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [ 779.044761] Call Trace: [ 779.044769] dump_stack+0x5b/0x90 [ 779.044775] ? string+0xab/0x180 [ 779.044781] print_address_description+0x6c/0x23c [ 779.044787] ? string+0xab/0x180 [ 779.044792] ? string+0xab/0x180 [ 779.044797] kasan_report.cold.3+0x1a/0x32 [ 779.044803] ? string+0xab/0x180 [ 779.044809] string+0xab/0x180 [ 779.044816] ? widen_string+0x160/0x160 [ 779.044822] ? vsnprintf+0x5bf/0x7f0 [ 779.044829] vsnprintf+0x4e7/0x7f0 [ 779.044836] ? pointer+0x4a0/0x4a0 [ 779.044841] ? seq_buf_vprintf+0x79/0xc0 [ 779.044848] seq_buf_vprintf+0x62/0xc0 [ 779.044855] trace_seq_printf+0x113/0x210 [ 779.044861] ? trace_seq_puts+0x110/0x110 [ 779.044867] ? trace_raw_output_prep+0xd8/0x110 [ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0 [ 779.044882] print_trace_line+0x377/0x890 [ 779.044888] ? tracing_buffers_read+0x300/0x300 [ 779.044893] ? ring_buffer_read+0x58/0x70 [ 779.044899] s_show+0x6e/0x140 [ 779.044906] seq_read+0x505/0x6a0 [ 779.044913] vfs_read+0xaf/0x1b0 [ 779.044919] ksys_read+0xa1/0x130 [ 779.044925] ? kernel_write+0xa0/0xa0 [ 779.044931] ? __do_page_fault+0x3d5/0x620 [ 779.044938] do_syscall_64+0x63/0x150 [ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.044949] RIP: 0033:0x7f62c2c2db31 [ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02 02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003 [ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710 [ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000 [ 779.044981] Allocated by task 1257: [ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 779.044992] kmem_cache_alloc+0xad/0x1a0 [ 779.044997] getname_flags+0x6c/0x2a0 [ 779.045003] user_path_at_empty+0x1d/0x40 [ 779.045008] do_faccessat+0x12a/0x330 [ 779.045012] do_syscall_64+0x63/0x150 [ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045019] Freed by task 1257: [ 779.045023] __kasan_slab_free+0x12e/0x180 [ 779.045029] kmem_cache_free+0x85/0x1b0 [ 779.045034] filename_lookup.part.70+0x176/0x250 [ 779.045039] do_faccessat+0x12a/0x330 [ 779.045043] do_syscall_64+0x63/0x150 [ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045052] The buggy address belongs to the object at ffff88814f326600 which belongs to the cache names_cache of size 4096 [ 779.045057] The buggy address is located 872 bytes to the right of 4096-byte region [ffff88814f326600, ffff88814f327600) [ 779.045058] The buggy address belongs to the page: [ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0 [ 779.045067] flags: 0x200000000010200(slab|head) [ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40 [ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 779.045083] page dumped because: kasan: bad access detected [ 779.045085] Memory state around the buggy address: [ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045099] ^ [ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045109] ================================================================== [ 779.045110] Disabling lock debugging due to kernel taint Correctly assign tree name str for smb3_tcon event. Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22cifs: allow guest mounts to work for smb3.11Ronnie Sahlberg1-2/+6
Fix Guest/Anonymous sessions so that they work with SMB 3.11. The commit noted below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for Guest/Anonumous sessions. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22fix incorrect error code mapping for OBJECTID_NOT_FOUNDSteve French1-1/+2
It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one). As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com>
2019-03-22cifs: fix that return -EINVAL when do dedupe operationXiaoli Feng1-1/+1
dedupe_file_range operations is combiled into remap_file_range. But it's always skipped for dedupe operations in function cifs_remap_file_range. Example to test: Before this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument After this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Operation not supported Influence for xfstests: generic/091 generic/112 generic/127 generic/263 These tests report this error "do_copy_range:: Invalid argument" instead of "FIDEDUPERANGE: Invalid argument". Because there are still two bugs cause these test failed. https://bugzilla.kernel.org/show_bug.cgi?id=202935 https://bugzilla.kernel.org/show_bug.cgi?id=202785 Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>