summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02Merge tag 'net-5.11-rc7' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc7, including fixes from bpf and mac80211 trees. Current release - regressions: - ip_tunnel: fix mtu calculation - mlx5: fix function calculation for page trees Previous releases - regressions: - vsock: fix the race conditions in multi-transport support - neighbour: prevent a dead entry from updating gc_list - dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add Previous releases - always broken: - bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF cgroup getsockopt infra when user space is trying to race against optlen, from Loris Reiff. - bpf: add missing fput() in BPF inode storage map update helper - udp: ipv4: manipulate network header of NATed UDP GRO fraglist - mac80211: fix station rate table updates on assoc - r8169: work around RTL8125 UDP HW bug - igc: report speed and duplex as unknown when device is runtime suspended - rxrpc: fix deadlock around release of dst cached on udp tunnel" * tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary net: ipa: fix two format specifier errors net: ipa: use the right accessor in ipa_endpoint_status_skip() net: ipa: be explicit about endianness net: ipa: add a missing __iomem attribute net: ipa: pass correct dma_handle to dma_free_coherent() r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS net: mvpp2: TCAM entry enable should be written after SRAM data net: lapb: Copy the skb before sending a packet net/mlx5e: Release skb in case of failure in tc update skb net/mlx5e: Update max_opened_tc also when channels are closed net/mlx5: Fix leak upon failure of rule creation net/mlx5: Fix function calculation for page trees docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc udp: ipv4: manipulate network header of NATed UDP GRO fraglist net: ip_tunnel: fix mtu calculation vsock: fix the race conditions in multi-transport support net: sched: replaced invalid qdisc tree flush helper in qdisc_replace ibmvnic: device remove has higher precedence over reset ...
2021-01-31Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-25/+44
Pull NFS client fixes from Trond Myklebust: - SUNRPC: Handle 0 length opaque XDR object data properly - Fix a layout segment leak in pnfs_layout_process() - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn - pNFS/NFSv4: Improve rejection of out-of-order layouts - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() * tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Handle 0 length opaque XDR object data properly SUNRPC: Move simple_get_bytes and simple_get_netobj into private header pNFS/NFSv4: Improve rejection of out-of-order layouts pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
2021-01-30Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-20/+81
Pull cifs fixes from Steve French: "Four cifs patches found in additional testing of the conversion to the new mount API: three small option processing ones, and one fixing domain based DFS referrals" * tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix dfs domain referrals cifs: returning mount parm processing errors correctly cifs: fix mounts to subdirectories of target cifs: ignore auto and noauto options if given
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells1-3/+3
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com Reported-by: Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29Merge tag 'for-5.11-rc5-tag' of ↵Linus Torvalds6-51/+46
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes for a late rc: - fix lockdep complaint on 32bit arches and also remove an unsafe memory use due to device vs filesystem lifetime - two fixes for free space tree: * race during log replay and cache rebuild, now more likely to happen due to changes in this dev cycle * possible free space tree corruption with online conversion during initial tree population" * tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix log replay failure due to race with space cache rebuild btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch btrfs: fix possible free space tree corruption with online conversion
2021-01-29Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+9
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
2021-01-29Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-42/+53
Pull io_uring fixes from Jens Axboe: "We got the cancelation story sorted now, so for all intents and purposes, this should be it for 5.11 outside of any potential little fixes that may come in. This contains: - task_work task state fixes (Hao, Pavel) - Cancelation fixes (me, Pavel) - Fix for an inflight req patch in this release (Pavel) - Fix for a lock deadlock issue (Pavel)" * tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block: io_uring: reinforce cancel on flush during exit io_uring: fix sqo ownership false positive warning io_uring: fix list corruption for splice file_get io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE io_uring: fix wqe->lock/completion_lock deadlock io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE io_uring: only call io_cqring_ev_posted() if events were posted io_uring: if we see flush on exit, cancel related tasks
2021-01-28cifs: fix dfs domain referralsRonnie Sahlberg6-16/+75
The new mount API requires additional changes to how DFS is handled. Additional testing of DFS uncovered problems with domain based DFS referrals (a follow on patch addresses DFS links) which this patch addresses. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-01-28Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fix from Tyler Hicks: "Fix a regression that resulted in two rounds of UID translations when setting v3 namespaced file capabilities in some configurations" * tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: fix uid translation for setxattr on security.capability
2021-01-28io_uring: reinforce cancel on flush during exitPavel Begunkov1-2/+1
What 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks") really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably. That can be achieved by io_uring_cancel_files(), but we'll miss it calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(), because it will go through __io_uring_cancel_task_requests(). Just always call io_uring_cancel_files() during cancel, it's good enough for now. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-28cifs: returning mount parm processing errors correctlySteve French1-4/+4
During additional testing of the updated cifs.ko with the new mount API support, we found a few additional cases where we were logging errors, but not returning them to the user. For example: a) invalid security mechanisms b) invalid cache options c) unsupported rdma d) invalid smb dialect requested Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-01-28io_uring: fix sqo ownership false positive warningPavel Begunkov1-2/+0
WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042 io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042 Call Trace: io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227 filp_close+0xb4/0x170 fs/open.c:1295 close_files fs/file.c:403 [inline] put_files_struct fs/file.c:418 [inline] put_files_struct+0x1cc/0x350 fs/file.c:415 exit_files+0x7e/0xa0 fs/file.c:435 do_exit+0xc22/0x2ae0 kernel/exit.c:820 do_group_exit+0x125/0x310 kernel/exit.c:922 get_signal+0x427/0x20f0 kernel/signal.c:2773 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Now io_uring_cancel_task_requests() can be called not through file notes but directly, remove a WARN_ONCE() there that give us false positives. That check is not very important and we catch it in other places. Fixes: 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks") Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-28io_uring: fix list corruption for splice file_getPavel Begunkov1-1/+2
kernel BUG at lib/list_debug.c:29! Call Trace: __list_add include/linux/list.h:67 [inline] list_add include/linux/list.h:86 [inline] io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466 __io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866 io_splice_prep fs/io_uring.c:3920 [inline] io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081 io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628 io_submit_sqe fs/io_uring.c:6705 [inline] io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953 __do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 io_file_get() may be called from splice, and so REQ_F_INFLIGHT may already be set. Fixes: 02a13674fa0e8 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT") Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+6879187cf57845801267@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-28cifs: fix mounts to subdirectories of targetSteve French1-0/+1
The "prefixpath" mount option needs to be ignored which was missed in the recent conversion to the new mount API (prefixpath would be set by the mount helper if mounting a subdirectory of the root of a share e.g. //server/share/subdir) Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2021-01-28cifs: ignore auto and noauto options if givenAdam Harvey1-0/+1
In 24e0a1eff9e2, the noauto and auto options were missed when migrating to the new mount API. As a result, users with noauto in their fstab mount options are now unable to mount cifs filesystems, as they'll receive an "Unknown parameter" error. This restores the old behaviour of ignoring noauto and auto if they're given. Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Adam Harvey <adam@adamharvey.name> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-01-27io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLEHao Xu1-2/+6
Abaci reported the follow warning: [ 27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0 [ 27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0 [ 27.077604] Modules linked in: [ 27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1 [ 27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 27.080852] RIP: 0010:__might_sleep+0x80/0xa0 [ 27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff 0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7 [ 27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286 [ 27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000 [ 27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570 [ 27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001 [ 27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000 [ 27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800 [ 27.091058] FS: 00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 27.092775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0 [ 27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.097011] Call Trace: [ 27.097685] __mutex_lock+0x5d/0xa30 [ 27.098565] ? prepare_to_wait_exclusive+0x71/0xc0 [ 27.099412] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.100441] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.101537] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 27.102656] ? trace_hardirqs_on+0x46/0x110 [ 27.103459] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.104317] io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.105113] io_cqring_wait+0x36e/0x4d0 [ 27.105770] ? find_held_lock+0x28/0xb0 [ 27.106370] ? io_uring_remove_task_files+0xa0/0xa0 [ 27.107076] __x64_sys_io_uring_enter+0x4fb/0x640 [ 27.107801] ? rcu_read_lock_sched_held+0x59/0xa0 [ 27.108562] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.109684] ? syscall_enter_from_user_mode+0x26/0x70 [ 27.110731] do_syscall_64+0x2d/0x40 [ 27.111296] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.112056] RIP: 0033:0x7f7b13dc8239 [ 27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa [ 27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239 [ 27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003 [ 27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008 [ 27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480 [ 27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000 [ 27.121490] irq event stamp: 5635 [ 27.121946] hardirqs last enabled at (5643): [] console_unlock+0x5c4/0x740 [ 27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740 [ 27.125192] softirqs last enabled at (5272): [] __do_softirq+0x3c5/0x5aa [ 27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20 [ 27.127634] ---[ end trace 289d7e28fa60f928 ]--- This is caused by calling io_cqring_overflow_flush() which may sleep after calling prepare_to_wait_exclusive() which set task state to TASK_INTERRUPTIBLE Reported-by: Abaci <abaci@linux.alibaba.com> Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync") Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27Revert "block: simplify set_init_blocksize" to regain lost performanceMaxim Mikityanskiy1-1/+9
The cited commit introduced a serious regression with SATA write speed, as found by bisecting. This patch reverts this commit, which restores write speed back to the values observed before this commit. The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs (WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a single HDD, the rest are different RAID levels built over the first partitions of 4 HDDs. Test results are in MB/s, R is read, W is write. | Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6 ----------------+--------+-------+-----------+-----------+-------- 9011495c9466 | R:256 | R:313 | R:276 | R:313 | R:323 (before faulty) | W:254 | W:253 | W:195 | W:204 | W:117 ----------------+--------+-------+-----------+-----------+-------- 5ff9f19231a0 | R:257 | R:398 | R:312 | R:344 | R:391 (faulty commit) | W:154 | W:122 | W:67.7 | W:66.6 | W:67.2 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:256 | R:401 | R:312 | R:356 | R:375 unpatched | W:149 | W:123 | W:64 | W:64.1 | W:61.5 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:255 | R:396 | R:312 | R:340 | R:393 patched | W:247 | W:274 | W:220 | W:225 | W:121 Applying this patch doesn't hurt read performance, while improves the write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed is restored back to the state before the faulty commit, and even a bit higher in RAID tests (which aren't HDD-bound on this device) - that is likely related to other optimizations done between the faulty commit and 5.10.10 which also improved the read speed. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Fixes: 5ff9f19231a0 ("block: simplify set_init_blocksize") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix wqe->lock/completion_lock deadlockPavel Begunkov1-8/+2
Joseph reports following deadlock: CPU0: ... io_kill_linked_timeout // &ctx->completion_lock io_commit_cqring __io_queue_deferred __io_queue_async_work io_wq_enqueue io_wqe_enqueue // &wqe->lock CPU1: ... __io_uring_files_cancel io_wq_cancel_cb io_wqe_cancel_pending_work // &wqe->lock io_cancel_task_cb // &ctx->completion_lock Only __io_queue_deferred() calls queue_async_work() while holding ctx->completion_lock, enqueue drained requests via io_req_task_queue() instead. Cc: stable@vger.kernel.org # 5.9+ Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLEPavel Begunkov1-17/+22
do not call blocking ops when !TASK_RUNNING; state=2 set at [<00000000ced9dbfc>] prepare_to_wait+0x1f4/0x3b0 kernel/sched/wait.c:262 WARNING: CPU: 1 PID: 19888 at kernel/sched/core.c:7853 __might_sleep+0xed/0x100 kernel/sched/core.c:7848 RIP: 0010:__might_sleep+0xed/0x100 kernel/sched/core.c:7848 Call Trace: __mutex_lock_common+0xc4/0x2ef0 kernel/locking/mutex.c:935 __mutex_lock kernel/locking/mutex.c:1103 [inline] mutex_lock_nested+0x1a/0x20 kernel/locking/mutex.c:1118 io_wq_submit_work+0x39a/0x720 fs/io_uring.c:6411 io_run_cancel fs/io-wq.c:856 [inline] io_wqe_cancel_pending_work fs/io-wq.c:990 [inline] io_wq_cancel_cb+0x614/0xcb0 fs/io-wq.c:1027 io_uring_cancel_files fs/io_uring.c:8874 [inline] io_uring_cancel_task_requests fs/io_uring.c:8952 [inline] __io_uring_files_cancel+0x115d/0x19e0 fs/io_uring.c:9038 io_uring_files_cancel include/linux/io_uring.h:51 [inline] do_exit+0x2e6/0x2490 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x16b5/0x2030 kernel/signal.c:2770 arch_do_signal_or_restart+0x8e/0x6a0 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x48/0x190 kernel/entry/common.c:302 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Rewrite io_uring_cancel_files() to mimic __io_uring_task_cancel()'s counting scheme, so it does all the heavy work before setting TASK_UNINTERRUPTIBLE. Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+f655445043a26a7cfab8@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> [axboe: fix inverted task check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLEPavel Begunkov1-6/+5
If the tctx inflight number haven't changed because of cancellation, __io_uring_task_cancel() will continue leaving the task in TASK_UNINTERRUPTIBLE state, that's not expected by __io_uring_files_cancel(). Ensure we always call finish_wait() before retrying. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26ecryptfs: fix uid translation for setxattr on security.capabilityMiklos Szeredi1-3/+7
Prior to commit 7c03e2cda4a5 ("vfs: move cap_convert_nscap() call into vfs_setxattr()") the translation of nscap->rootid did not take stacked filesystems (overlayfs and ecryptfs) into account. That patch fixed the overlay case, but made the ecryptfs case worse. Restore old the behavior for ecryptfs that existed before the overlayfs fix. This does not fix ecryptfs's handling of complex user namespace setups, but it does make sure existing setups don't regress. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Tyler Hicks <code@tyhicks.com> Fixes: 7c03e2cda4a5 ("vfs: move cap_convert_nscap() call into vfs_setxattr()") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Tyler Hicks <code@tyhicks.com>
2021-01-25fs/pipe: allow sendfile() to pipe againJohannes Berg1-0/+1
After commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") sendfile() could no longer send data from a real file to a pipe, breaking for example certain cgit setups (e.g. when running behind fcgiwrap), because in this case cgit will try to do exactly this: sendfile() to a pipe. Fix this by using iter_file_splice_write for the splice_write method of pipes, as suggested by Christoph. Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-25btrfs: fix log replay failure due to race with space cache rebuildFilipe Manana1-43/+18
After a sudden power failure we may end up with a space cache on disk that is not valid and needs to be rebuilt from scratch. If that happens, during log replay when we attempt to pin an extent buffer from a log tree, at btrfs_pin_extent_for_log_replay(), we do not wait for the space cache to be rebuilt through the call to: btrfs_cache_block_group(cache, 1); That is because that only waits for the task (work queue job) that loads the space cache to change the cache state from BTRFS_CACHE_FAST to any other value. That is ok when the space cache on disk exists and is valid, but when the cache is not valid and needs to be rebuilt, it ends up returning as soon as the cache state changes to BTRFS_CACHE_STARTED (done at caching_thread()). So this means that we can end up trying to unpin a range which is not yet marked as free in the block group. This results in the call to btrfs_remove_free_space() to return -EINVAL to btrfs_pin_extent_for_log_replay(), which in turn makes the log replay fail as well as mounting the filesystem. More specifically the -EINVAL comes from free_space_cache.c:remove_from_bitmap(), because the requested range is not marked as free space (ones in the bitmap), we have the following condition triggered: static noinline int remove_from_bitmap(struct btrfs_free_space_ctl *ctl, (...) if (ret < 0 || search_start != *offset) return -EINVAL; (...) It's the "search_start != *offset" that results in the condition being evaluated to true. When this happens we got the following in dmesg/syslog: [72383.415114] BTRFS: device fsid 32b95b69-0ea9-496a-9f02-3f5a56dc9322 devid 1 transid 1432 /dev/sdb scanned by mount (3816007) [72383.417837] BTRFS info (device sdb): disk space caching is enabled [72383.418536] BTRFS info (device sdb): has skinny extents [72383.423846] BTRFS info (device sdb): start tree-log replay [72383.426416] BTRFS warning (device sdb): block group 30408704 has wrong amount of free space [72383.427686] BTRFS warning (device sdb): failed to load free space cache for block group 30408704, rebuilding it now [72383.454291] BTRFS: error (device sdb) in btrfs_recover_log_trees:6203: errno=-22 unknown (Failed to pin buffers while recovering log root tree.) [72383.456725] BTRFS: error (device sdb) in btrfs_replay_log:2253: errno=-22 unknown (Failed to recover log tree) [72383.460241] BTRFS error (device sdb): open_ctree failed We also mark the range for the extent buffer in the excluded extents io tree. That is fine when the space cache is valid on disk and we can load it, in which case it causes no problems. However, for the case where we need to rebuild the space cache, because it is either invalid or it is missing, having the extent buffer range marked in the excluded extents io tree leads to a -EINVAL failure from the call to btrfs_remove_free_space(), resulting in the log replay and mount to fail. This is because by having the range marked in the excluded extents io tree, the caching thread ends up never adding the range of the extent buffer as free space in the block group since the calls to add_new_free_space(), called from load_extent_tree_free(), filter out any ranges that are marked as excluded extents. So fix this by making sure that during log replay we wait for the caching task to finish completely when we need to rebuild a space cache, and also drop the need to mark the extent buffer range in the excluded extents io tree, as well as clearing ranges from that tree at btrfs_finish_extent_commit(). This started to happen with some frequency on large filesystems having block groups with a lot of fragmentation since the recent commit e747853cae3ae3 ("btrfs: load free space cache asynchronously"), but in fact the issue has been there for years, it was just much less likely to happen. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25btrfs: fix lockdep warning due to seqcount_mutex on 32bit archSu Yue2-6/+7
This effectively reverts commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t"). While running fstests on 32 bits test box, many tests failed because of warnings in dmesg. One of those warnings (btrfs/003): [66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5 [66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803 [66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70 [66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246 [66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0 [66.441485] Call Trace: [66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs] [66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs] [66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs] [66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441619] ? __this_cpu_preempt_check+0xf/0x11 [66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs] [66.441700] ? __lock_acquire+0x35f/0x2650 [66.441717] ? lockdep_hardirqs_on+0x87/0x120 [66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0 [66.441724] ? call_rcu+0x2d3/0x530 [66.441731] ? __might_fault+0x41/0x90 [66.441736] ? kvm_sched_clock_read+0x15/0x50 [66.441740] ? sched_clock+0x8/0x10 [66.441745] ? sched_clock_cpu+0x13/0x180 [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441768] __ia32_sys_ioctl+0x165/0x8a0 [66.441773] ? __this_cpu_preempt_check+0xf/0x11 [66.441785] ? __might_fault+0x89/0x90 [66.441791] __do_fast_syscall_32+0x54/0x80 [66.441796] do_fast_syscall_32+0x32/0x70 [66.441801] do_SYSENTER_32+0x15/0x20 [66.441805] entry_SYSENTER_32+0x9f/0xf2 [66.441808] EIP: 0xab7b5549 [66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c [66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98 [66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292 [66.441833] irq event stamp: 42579 [66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590 [66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590 [66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60 [66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60 ======================================================================== btrfs_remove_chunk+0x58b/0x7b0: __seqprop_mutex_assert at linux/./include/linux/seqlock.h:279 (inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212 (inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994 ======================================================================== The warning is produced by lockdep_assert_held() in __seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled. And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock fs_info->chunk_mutex held already. After adding some debug prints, the cause was found that many __alloc_device() are called with NULL @fs_info (during scanning ioctl). Inside the function, btrfs_device_data_ordered_init() is expanded to seqcount_mutex_init(). In this scenario, its second parameter info->chunk_mutex is &NULL->chunk_mutex which equals to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus, seqcount_mutex_init() is called in wrong way. And later btrfs_device_get/set helpers trigger lockdep warnings. The device and filesystem object lifetimes are different and we'd have to synchronize initialization of the btrfs_device::data_seqcount with the fs_info, possibly using some additional synchronization. It would still not prevent concurrent access to the seqcount lock when it's used for read and initialization. Commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") does not mention a particular problem being fixed so revert should not cause any harm and we'll get the lockdep warning fixed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139 Reported-by: Erhard F <erhard_f@mailbox.org> Fixes: d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") CC: stable@vger.kernel.org # 5.10 CC: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25btrfs: fix possible free space tree corruption with online conversionJosef Bacik3-2/+21
While running btrfs/011 in a loop I would often ASSERT() while trying to add a new free space entry that already existed, or get an EEXIST while adding a new block to the extent tree, which is another indication of double allocation. This occurs because when we do the free space tree population, we create the new root and then populate the tree and commit the transaction. The problem is when you create a new root, the root node and commit root node are the same. During this initial transaction commit we will run all of the delayed refs that were paused during the free space tree generation, and thus begin to cache block groups. While caching block groups the caching thread will be reading from the main root for the free space tree, so as we make allocations we'll be changing the free space tree, which can cause us to add the same range twice which results in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a variety of different errors when running delayed refs because of a double allocation. Fix this by marking the fs_info as unsafe to load the free space tree, and fall back on the old slow method. We could be smarter than this, for example caching the block group while we're populating the free space tree, but since this is a serious problem I've opted for the simplest solution. CC: stable@vger.kernel.org # 4.9+ Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-24pNFS/NFSv4: Improve rejection of out-of-order layoutsTrond Myklebust1-6/+16
If a layoutget ends up being reordered w.r.t. a layoutreturn, e.g. due to a layoutget-on-open not knowing a priori which file to lock, then we must assume the layout is no longer being considered valid state by the server. Incrementally improve our ability to reject such states by using the cached old stateid in conjunction with the plh_barrier to try to identify them. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-24pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturnTrond Myklebust1-18/+21
When we're scheduling a layoutreturn, we need to ignore any further incoming layouts with sequence ids that are going to be affected by the layout return. Fixes: 44ea8dfce021 ("NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-24pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()Trond Myklebust1-2/+7
If the server returns a new stateid that does not match the one in our cache, then try to return the one we hold instead of just invalidating it on the client side. This ensures that both client and server will agree that the stateid is invalid. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-24pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()Trond Myklebust1-0/+1
If the server returns a new stateid that does not match the one in our cache, then pnfs_layout_process() will leak the layout segments returned by pnfs_mark_layout_stateid_invalid(). Fixes: 9888d837f3cf ("pNFS: Force a retry of LAYOUTGET if the stateid doesn't match our cache") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-24io_uring: only call io_cqring_ev_posted() if events were postedJens Axboe1-3/+7
This normally doesn't cause any extra harm, but it does mean that we'll increment the eventfd notification count, if one has been registered with the ring. This can confuse applications, when they see more notifications on the eventfd side than are available in the ring. Do the nice thing and only increment this count, if we actually posted (or even overflowed) events. Reported-and-tested-by: Dan Melnic <dmm@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24io_uring: if we see flush on exit, cancel related tasksJens Axboe1-1/+8
Ensure we match tasks that belong to a dead or dying task as well, as we need to reap those in addition to those belonging to the exiting task. Cc: stable@vger.kernel.org # 5.9+ Reported-by: Josef Grieb <josef.grieb@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24Merge tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-blockLinus Torvalds1-20/+47
Pull io_uring fixes from Jens Axboe: "Still need a final cancelation fix that isn't quite done done, expected in the next day or two. That said, this contains: - Wakeup fix for IOPOLL requests - SQPOLL split close op handling fix - Ensure that any use of io_uring fd itself is marked as inflight - Short non-regular file read fix (Pavel) - Fix up bad false positive warning (Pavel) - SQPOLL fixes (Pavel) - In-flight removal fix (Pavel)" * tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block: io_uring: account io_uring internal files as REQ_F_INFLIGHT io_uring: fix sleeping under spin in __io_clean_op io_uring: fix short read retries for non-reg files io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state io_uring: fix skipping disabling sqo on exec io_uring: fix uring_flush in exit_files() warning io_uring: fix false positive sqo warning on flush io_uring: iopoll requests should also wake task ->in_idle state
2021-01-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+6
Merge misc fixes from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (pagealloc, memcg, kasan, memory-failure, and highmem), ubsan, proc, and MAINTAINERS" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add a couple more files to the Clang/LLVM section proc_sysctl: fix oops caused by incorrect command parameters powerpc/mm/highmem: use __set_pte_at() for kmap_local() mips/mm/highmem: use set_pte() for kmap_local() mm/highmem: prepare for overriding set_pte_at() sparc/mm/highmem: flush cache and TLB mm: fix page reference leak in soft_offline_page() ubsan: disable unsigned-overflow check for i386 kasan, mm: fix resetting page_alloc tags for HW_TAGS kasan, mm: fix conflicts with init_on_alloc/free kasan: fix HW_TAGS boot parameters kasan: fix incorrect arguments passing in kasan_add_zero_shadow kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow mm: fix numa stats for thp migration mm: memcg: fix memcg file_dirty numa stat mm: memcg/slab: optimize objcg stock draining mm: fix initialization of struct page for holes in memory layout x86/setup: don't remove E820_TYPE_RAM for pfn 0
2021-01-24Merge tag 'driver-core-5.11-rc5' of ↵Linus Torvalds1-41/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for 5.11-rc5 that resolve some reported problems: - revert of a -rc1 patch that was causing problems with some machines - device link device name collision problem fix (busses only have to name devices unique to their bus, not unique to all busses) - kernfs splice bugfixes to resolve firmware loading problems for Qualcomm systems. - other tiny driver core fixes for minor issues reported. All of these have been in linux-next with no reported problems" * tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Fix device link device name collision driver core: Extend device_is_dependent() kernfs: wire up ->splice_read and ->splice_write kernfs: implement ->write_iter kernfs: implement ->read_iter Revert "driver core: Reorder devices on successful probe" Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity() drivers core: Free dma_range_map when driver probe failed
2021-01-24proc_sysctl: fix oops caused by incorrect command parametersXiaoming Ni1-1/+6
The process_sysctl_arg() does not check whether val is empty before invoking strlen(val). If the command line parameter () is incorrectly configured and val is empty, oops is triggered. For example: "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is triggered. The call stack is as follows: Kernel command line: .... hung_task_panic ...... Call trace: __pi_strlen+0x10/0x98 parse_args+0x278/0x344 do_sysctl_args+0x8c/0xfc kernel_init+0x5c/0xf4 ret_from_fork+0x10/0x30 To fix it, check whether "val" is empty when "phram" is a sysctl field. Error codes are returned in the failure branch, and error logs are generated by parse_args(). Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line") Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24Merge tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2-4/+4
Pull cifs fixes from Steve French: "An important signal handling patch for stable, and two small cleanup patches" * tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: do not fail __smb_send_rqst if non-fatal signals are pending fs/cifs: Simplify bool comparison. fs/cifs: Assign boolean values to a bool variable
2021-01-24io_uring: account io_uring internal files as REQ_F_INFLIGHTJens Axboe1-10/+26
We need to actively cancel anything that introduces a potential circular loop, where io_uring holds a reference to itself. If the file in question is an io_uring file, then add the request to the inflight list. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24io_uring: fix sleeping under spin in __io_clean_opPavel Begunkov1-5/+5
[ 27.629441] BUG: sleeping function called from invalid context at fs/file.c:402 [ 27.631317] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1012, name: io_wqe_worker-0 [ 27.633220] 1 lock held by io_wqe_worker-0/1012: [ 27.634286] #0: ffff888105e26c98 (&ctx->completion_lock) {....}-{2:2}, at: __io_req_complete.part.102+0x30/0x70 [ 27.649249] Call Trace: [ 27.649874] dump_stack+0xac/0xe3 [ 27.650666] ___might_sleep+0x284/0x2c0 [ 27.651566] put_files_struct+0xb8/0x120 [ 27.652481] __io_clean_op+0x10c/0x2a0 [ 27.653362] __io_cqring_fill_event+0x2c1/0x350 [ 27.654399] __io_req_complete.part.102+0x41/0x70 [ 27.655464] io_openat2+0x151/0x300 [ 27.656297] io_issue_sqe+0x6c/0x14e0 [ 27.660991] io_wq_submit_work+0x7f/0x240 [ 27.662890] io_worker_handle_work+0x501/0x8a0 [ 27.664836] io_wqe_worker+0x158/0x520 [ 27.667726] kthread+0x134/0x180 [ 27.669641] ret_from_fork+0x1f/0x30 Instead of cleaning files on overflow, return back overflow cancellation into io_uring_cancel_files(). Previously it was racy to clean REQ_F_OVERFLOW flag, but we got rid of it, and can do it through repetitive attempts targeting all matching requests. Reported-by: Abaci <abaci@linux.alibaba.com> Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-23cifs: do not fail __smb_send_rqst if non-fatal signals are pendingRonnie Sahlberg1-2/+2
RHBZ 1848178 The original intent of returning an error in this function in the patch: "CIFS: Mask off signals when sending SMB packets" was to avoid interrupting packet send in the middle of sending the data (and thus breaking an SMB connection), but we also don't want to fail the request for non-fatal signals even before we have had a chance to try to send it (the reported problem could be reproduced e.g. by exiting a child process when the parent process was in the midst of calling futimens to update a file's timestamps). In addition, since the signal may remain pending when we enter the sending loop, we may end up not sending the whole packet before TCP buffers become full. In this case the code returns -EINTR but what we need here is to return -ERESTARTSYS instead to allow system calls to be restarted. Fixes: b30c74c73c78 ("CIFS: Mask off signals when sending SMB packets") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-01-22Merge tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-clientLinus Torvalds1-17/+17
Pull ceph fixes from Ilya Dryomov: "A patch to zero out sensitive cryptographic data and two minor cleanups prompted by the fact that a bunch of code was moved in this cycle" * tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client: libceph: fix "Boolean result is used in bitwise operation" warning libceph, ceph: disambiguate ceph_connection_operations handlers libceph: zero out session key and connection secret
2021-01-22io_uring: fix short read retries for non-reg filesPavel Begunkov1-1/+1
Sockets and other non-regular files may actually expect short reads to happen, don't retry reads for them. Because non-reg files don't set FMODE_BUF_RASYNC and so it won't do second/retry do_read, we can filter out those cases after first do_read() attempt with ret>0. Cc: stable@vger.kernel.org # 5.9+ Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-22io_uring: fix SQPOLL IORING_OP_CLOSE cancelation stateJens Axboe1-1/+2
IORING_OP_CLOSE is special in terms of cancelation, since it has an intermediate state where we've removed the file descriptor but hasn't closed the file yet. For that reason, it's currently marked with IO_WQ_WORK_NO_CANCEL to prevent cancelation. This ensures that the op is always run even if canceled, to prevent leaving us with a live file but an fd that is gone. However, with SQPOLL, since a cancel request doesn't carry any resources on behalf of the request being canceled, if we cancel before any of the close op has been run, we can end up with io-wq not having the ->files assigned. This can result in the following oops reported by Joseph: BUG: kernel NULL pointer dereference, address: 00000000000000d8 PGD 800000010b76f067 P4D 800000010b76f067 PUD 10b462067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1788 Comm: io_uring-sq Not tainted 5.11.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__lock_acquire+0x19d/0x18c0 Code: 00 00 8b 1d fd 56 dd 08 85 db 0f 85 43 05 00 00 48 c7 c6 98 7b 95 82 48 c7 c7 57 96 93 82 e8 9a bc f5 ff 0f 0b e9 2b 05 00 00 <48> 81 3f c0 ca 67 8a b8 00 00 00 00 41 0f 45 c0 89 04 24 e9 81 fe RSP: 0018:ffffc90001933828 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000000d8 RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff888106e8a140 R15: 00000000000000d8 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000d8 CR3: 0000000106efa004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x31a/0x440 ? close_fd_get_file+0x39/0x160 ? __lock_acquire+0x647/0x18c0 _raw_spin_lock+0x2c/0x40 ? close_fd_get_file+0x39/0x160 close_fd_get_file+0x39/0x160 io_issue_sqe+0x1334/0x14e0 ? lock_acquire+0x31a/0x440 ? __io_free_req+0xcf/0x2e0 ? __io_free_req+0x175/0x2e0 ? find_held_lock+0x28/0xb0 ? io_wq_submit_work+0x7f/0x240 io_wq_submit_work+0x7f/0x240 io_wq_cancel_cb+0x161/0x580 ? io_wqe_wake_worker+0x114/0x360 ? io_uring_get_socket+0x40/0x40 io_async_find_and_cancel+0x3b/0x140 io_issue_sqe+0xbe1/0x14e0 ? __lock_acquire+0x647/0x18c0 ? __io_queue_sqe+0x10b/0x5f0 __io_queue_sqe+0x10b/0x5f0 ? io_req_prep+0xdb/0x1150 ? mark_held_locks+0x6d/0xb0 ? mark_held_locks+0x6d/0xb0 ? io_queue_sqe+0x235/0x4b0 io_queue_sqe+0x235/0x4b0 io_submit_sqes+0xd7e/0x12a0 ? _raw_spin_unlock_irq+0x24/0x30 ? io_sq_thread+0x3ae/0x940 io_sq_thread+0x207/0x940 ? do_wait_intr_irq+0xc0/0xc0 ? __ia32_sys_io_uring_enter+0x650/0x650 kthread+0x134/0x180 ? kthread_create_worker_on_cpu+0x90/0x90 ret_from_fork+0x1f/0x30 Fix this by moving the IO_WQ_WORK_NO_CANCEL until _after_ we've modified the fdtable. Canceling before this point is totally fine, and running it in the io-wq context _after_ that point is also fine. For 5.12, we'll handle this internally and get rid of the no-cancel flag, as IORING_OP_CLOSE is the only user of it. Cc: stable@vger.kernel.org Fixes: b5dba59e0cf7 ("io_uring: add support for IORING_OP_CLOSE") Reported-by: "Abaci <abaci@linux.alibaba.com>" Reviewed-and-tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-21Merge tag 'fs_for_v5.11-rc5' of ↵Linus Torvalds2-14/+17
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fs and udf fixes from Jan Kara: "A lazytime handling fix from Eric Biggers and a fix of UDF session handling for large devices" * tag 'fs_for_v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: fix the problem that the disc content is not displayed fs: fix lazytime expiration handling in __writeback_single_inode()
2021-01-21kernfs: wire up ->splice_read and ->splice_writeChristoph Hellwig1-0/+2
Wire up the splice_read and splice_write methods to the default helpers using ->read_iter and ->write_iter now that those are implemented for kernfs. This restores support to use splice and sendfile on kernfs files. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Reported-by: Siddharth Gupta <sidgup@codeaurora.org> Tested-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210120204631.274206-4-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21kernfs: implement ->write_iterChristoph Hellwig1-18/+10
Switch kernfs to implement the write_iter method instead of plain old write to prepare to supporting splice and sendfile again. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210120204631.274206-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21kernfs: implement ->read_iterChristoph Hellwig1-23/+12
Switch kernfs to implement the read_iter method instead of plain old read to prepare to supporting splice and sendfile again. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210120204631.274206-2-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20Merge tag 'for-5.11-rc4-tag' of ↵Linus Torvalds6-11/+29
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more one line fixes for various bugs, stable material. - fix send when emitting clone operation from the same file and root - fix double free on error when cleaning backrefs - lockdep fix during relocation - handle potential error during reloc when starting transaction - skip running delayed refs during commit (leftover from code removal in this dev cycle)" * tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't clear ret in btrfs_start_dirty_block_groups btrfs: fix lockdep splat in btrfs_recover_relocation btrfs: do not double free backref nodes on error btrfs: don't get an EINTR during drop_snapshot for reloc btrfs: send: fix invalid clone operations when cloning from the same file and root btrfs: no need to run delayed refs after commit_fs_roots during commit
2021-01-20cachefiles: Drop superfluous readpages aops NULL checkTakashi Iwai1-2/+0
After the recent actions to convert readpages aops to readahead, the NULL checks of readpages aops in cachefiles_read_or_alloc_page() may hit falsely. More badly, it's an ASSERT() call, and this panics. Drop the superfluous NULL checks for fixing this regression. [DH: Note that cachefiles never actually used readpages, so this check was never actually necessary] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245 Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-19Merge tag 'nfsd-5.11-2' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results - Fix a tracepoint change that went in the initial 5.11 merge * tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Move the svc_xdr_recvfrom tracepoint again nfsd4: readdirplus shouldn't return parent of export
2021-01-18btrfs: don't clear ret in btrfs_start_dirty_block_groupsJosef Bacik1-1/+2
If we fail to update a block group item in the loop we'll break, however we'll do btrfs_run_delayed_refs and lose our error value in ret, and thus not clean up properly. Fix this by only running the delayed refs if there was no failure. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 09:18:30 +0000