| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge patches from Andrew Morton:
"Ten fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
mm/memory-failure.c: transfer page count from head page to tail page after split thp
MAINTAINERS: set up proper record for Xilinx Zynq
mm: remove bogus warning in copy_huge_pmd()
memcg: fix memcg_size() calculation
mm: fix use-after-free in sys_remap_file_pages
mm: munlock: fix deadlock in __munlock_pagevec()
mm: munlock: fix a bug where THP tail page is encountered
|
|
The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock.
That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with
epoll_ctl(b, EPOLL_CTL_DEL, a, x). The deadlock was introduced with
commmit 67347fe4e632 ("epoll: do not take global 'epmutex' for simple
topologies").
The acquistion of the ep->mtx for the destination 'ep' was added such
that a concurrent EPOLL_CTL_ADD operation would see the correct state of
the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links')
However, by simply not acquiring the lock, we do not serialize behind
the ep->mtx from the add path, and thus may perform a full path check
when if we had waited a little longer it may not have been necessary.
However, this is a transient state, and performing the full loop
checking in this case is not harmful.
The important point is that we wouldn't miss doing the full loop
checking when required, since EPOLL_CTL_ADD always locks any 'ep's that
its operating upon. The reason we don't need to do lock ordering in the
add path, is that we are already are holding the global 'epmutex'
whenever we do the double lock. Further, the original posting of this
patch, which was tested for the intended performance gains, did not
perform this additional locking.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Pull GFS2 fixes from Steven Whitehouse:
"Here is a set of small fixes for GFS2. There is a fix to drop
s_umount which is copied in from the core vfs, two patches relate to a
hard to hit "use after free" and memory leak. Two patches related to
using DIO and buffered I/O on the same file to ensure correct
operation in relation to glock state changes. The final patch adds an
RCU read lock to ensure correct locking on an error path"
* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Fix unsafe dereference in dump_holder()
GFS2: Wait for async DIO in glock state changes
GFS2: Fix incorrect invalidation for DIO/buffered I/O
GFS2: Fix slab memory leak in gfs2_bufdata
GFS2: Fix use-after-free race when calling gfs2_remove_from_ail
GFS2: don't hold s_umount over blkdev_put
|
|
GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
RCU read lock is held when using task_struct returned from pid_task().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Set FILE_CREATED on O_CREAT|O_EXCL.
cifs code didn't change during commit 116cc0225381415b96551f725455d067f63a76a0
Kernel bugzilla 66251
Signed-off-by: Shirish Pargaonkar <spargaonkar@suse.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
When we obtain tcon from cifs_sb, we use cifs_sb_tlink() to first obtain
tlink which also grabs a reference to it. We do not drop this reference
to tlink once we are done with the call.
The patch fixes this issue by instead passing tcon as a parameter and
avoids having to obtain a reference to the tlink. A lookup for the tcon
is already made in the calling functions and this way we avoid having to
re-run the lookup. This is also consistent with the argument list for
other similar calls for M-F symlinks.
We should also return an ENOSYS when we do not find a protocol specific
function to lookup the MF Symlink data.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A collection of bug fixes destined for stable and some printk cleanups
and a patch so that instead of BUG'ing we use the ext4_error()
framework to mark the file system is corrupted"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add explicit casts when masking cluster sizes
ext4: fix deadlock when writing in ENOSPC conditions
jbd2: rename obsoleted msg JBD->JBD2
jbd2: revise KERN_EMERG error messages
jbd2: don't BUG but return ENOSPC if a handle runs out of space
ext4: Do not reserve clusters when fs doesn't support extents
ext4: fix del_timer() misuse for ->s_err_report
ext4: check for overlapping extents in ext4_valid_extent_entries()
ext4: fix use-after-free in ext4_mb_new_blocks
ext4: call ext4_error_inode() if jbd2_journal_dirty_metadata() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"One simple fix of oops in ext2 which was recently hit by Christoph"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix oops in ext2_get_block() called from ext2_quota_write()
|
|
Pull AIO leak fixes from Ben LaHaise:
"I've put these two patches plus Linus's change through a round of
tests, and it passes millions of iterations of the aio numa
migratepage test, as well as a number of repetitions of a few simple
read and write tests.
The first patch fixes the memory leak Kent introduced, while the
second patch makes aio_migratepage() much more paranoid and robust"
* git://git.kvack.org/~bcrl/aio-next:
aio/migratepages: make aio migrate pages sane
aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
|
|
Since commit 36bc08cc01709 ("fs/aio: Add support to aio ring pages
migration") the aio ring setup code has used a special per-ring backing
inode for the page allocations, rather than just using random anonymous
pages.
However, rather than remembering the pages as it allocated them, it
would allocate the pages, insert them into the file mapping (dirty, so
that they couldn't be free'd), and then forget about them. And then to
look them up again, it would mmap the mapping, and then use
"get_user_pages()" to get back an array of the pages we just created.
Now, not only is that incredibly inefficient, it also leaked all the
pages if the mmap failed (which could happen due to excessive number of
mappings, for example).
So clean it all up, making it much more straightforward. Also remove
some left-overs of the previous (broken) mm_populate() usage that was
removed in commit d6c355c7dabc ("aio: fix race in ring buffer page
lookup introduced by page migration support") but left the pointless and
now misleading MAP_POPULATE flag around.
Tested-and-acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The arbitrary restriction on page counts offered by the core
migrate_page_move_mapping() code results in rather suspicious looking
fiddling with page reference counts in the aio_migratepage() operation.
To fix this, make migrate_page_move_mapping() take an extra_count parameter
that allows aio to tell the code about its own reference count on the page
being migrated.
While cleaning up aio_migratepage(), make it validate that the old page
being passed in is actually what aio_migratepage() expects to prevent
misbehaviour in the case of races.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
|
|
e34ecee2ae791df674dfb466ce40692ca6218e43 reworked the percpu reference
counting to correct a bug trinity found. Unfortunately, the change lead
to kioctxes being leaked because there was no final reference count to
put. Add that reference count back in to fix things.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
|
|
Pull xfs bugfixes from Ben Myers:
"This contains fixes for some asserts
related to project quotas, a memory leak, a hang when disabling group or
project quotas before disabling user quotas, Dave's email address, several
fixes for the alignment of file allocation to stripe unit/width geometry, a
fix for an assertion with xfs_zero_remaining_bytes, and the behavior of
metadata writeback in the face of IO errors.
Details:
- fix memory leak in xfs_dir2_node_removename
- fix quota assertion in xfs_setattr_size
- fix quota assertions in xfs_qm_vop_create_dqattach
- fix for hang when disabling group and project quotas before
disabling user quotas
- fix Dave Chinner's email address in MAINTAINERS
- fix for file allocation alignment
- fix for assertion in xfs_buf_stale by removing xfsbdstrat
- fix for alignment with swalloc mount option
- fix for "retry forever" semantics on IO errors"
* tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: abort metadata writeback on permanent errors
xfs: swalloc doesn't align allocations properly
xfs: remove xfsbdstrat error
xfs: align initial file allocations correctly
MAINTAINERS: fix incorrect mail address of XFS maintainer
xfs: fix infinite loop by detaching the group/project hints from user dquot
xfs: fix assertion failure at xfs_setattr_nonsize
xfs: fix false assertion at xfs_qm_vop_create_dqattach
xfs: fix memory leak in xfs_dir2_node_removename
|
|
Some pstore backing devices use on board flash as persistent
storage. These have limited numbers of write cycles so it
is a poor idea to use them from high frequency operations.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The missing casts can cause the high 64-bits of the physical blocks to
be lost. Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.
Thanks to the Emese Revfy and the PaX security team for reporting this
issue.
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
We need to wait for any outstanding DIO to complete in a couple
of situations. Firstly, in case we are changing out of deferred
mode (in inode_go_sync) where GLF_DIRTY will not be set. That
call could be prefixed with a test for gl_state == LM_ST_DEFERRED
but it doesn't seem worth it bearing in mind that the test for
outstanding DIO is very quick anyway, in the usual case that there
is none.
The second case is in inode_go_lock which will catch the cases
where we have a cached EX lock, but where we grant deferred locks
against it so that there is no glock state transistion. We only
need to wait if the state is not deferred, since DIO is valid
anyway in that state.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In patch 209806aba9d540dde3db0a5ce72307f85f33468f we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.
The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here's a single sysfs fix for 3.13-rc5 that resolves a lockdep issue
in sysfs that has been reported"
* tag 'driver-core-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: give different locking key to regular and bin files
|
|
Akira-san has been reporting rare deadlocks of his machine when running
xfstests test 269 on ext4 filesystem. The problem turned out to be in
ext4_da_reserve_metadata() and ext4_da_reserve_space() which called
ext4_should_retry_alloc() while holding i_data_sem. Since
ext4_should_retry_alloc() can force a transaction commit, this is a
lock ordering violation and leads to deadlocks.
Fix the problem by just removing the retry loops. These functions should
just report ENOSPC to the caller (e.g. ext4_da_write_begin()) and that
function must take care of retrying after dropping all necessary locks.
Reported-and-tested-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull two Ceph fixes from Sage Weil:
"One of these is fixing a regression from the d_flags file type patch
that went into -rc1 that broke instantiation of inodes and dentries
(we were doing dentries first). The other is just an off-by-one
corner case"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: Avoid data inconsistency due to d-cache aliasing in readpage()
ceph: initialize inode before instantiating dentry
|
|
If we are doing aysnc writeback of metadata, we can get write errors
but have nobody to report them to. At the moment, we simply attempt
to reissue the write from io completion in the hope that it's a
transient error.
When it's not a transient error, the buffer is stuck forever in
this loop, and we cannot break out of it. Eventually, unmount will
hang because the AIL cannot be emptied and everything goes downhill
from them.
To solve this problem, only retry the write IO once before aborting
it. We don't throw the buffer away because some transient errors can
last minutes (e.g. FC path failover) or even hours (thin
provisioned devices that have run out of backing space) before they
go away. Hence we really want to keep trying until we can't try any
more.
Because the buffer was not cleaned, however, it does not get removed
from the AIL and hence the next pass across the AIL will start IO on
it again. As such, we still get the "retry forever" semantics that
we currently have, but we allow other access to the buffer in the
mean time. Meanwhile the filesystem can continue to modify the
buffer and relog it, so the IO errors won't hang the log or the
filesystem.
Now when we are pushing the AIL, we can see all these "permanent IO
error" buffers and we can issue a warning about failures before we
retry the IO. We can also catch these buffers when unmounting an
issue a corruption warning, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
When swalloc is specified as a mount option, allocations are
supposed to be aligned to the stripe width rather than the stripe
unit of the underlying filesystem. However, it does not do this.
What the implementation does is round up the allocation size to a
stripe width, hence ensuring that all allocations span a full stripe
width. It does not, however, ensure that that allocation is aligned
to a stripe width, and hence the allocations can span multiple
underlying stripes and so still see RMW cycles for things like
direct IO on MD RAID.
So, if the swalloc mount option is set, change the allocation
alignment in xfs_bmap_btalloc() to use the stripe width rather than
the stripe unit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
The xfsbdstrat helper is a small but useless wrapper for xfs_buf_iorequest that
handles the case of a shut down filesystem. Most of the users have private,
uncached buffers that can just be freed in this case, but the complex error
handling in xfs_bioerror_relse messes up the case when it's called without
a locked buffer.
Remove xfsbdstrat and opencode the error handling in the callers. All but
one can simply return an error and don't need to deal with buffer state,
and the one caller that cares about the buffer state could do with a major
cleanup as well, but we'll defer that to later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
The function xfs_bmap_isaeof() is used to indicate that an
allocation is occurring at or past the end of file, and as such
should be aligned to the underlying storage geometry if possible.
Commit 27a3f8f ("xfs: introduce xfs_bmap_last_extent") changed the
behaviour of this function for empty files - it turned off
allocation alignment for this case accidentally. Hence large initial
allocations from direct IO are not getting correctly aligned to the
underlying geometry, and that is cause write performance to drop in
alignment sensitive configurations.
Fix it by considering allocation into empty files as requiring
aligned allocation again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f9b395a8ef8f34d19cae2cde361e19c96e097fad)
|
|
xfs_quota(8) will hang up if trying to turn group/project quota off
before the user quota is off, this could be 100% reproduced by:
# mount -ouquota,gquota /dev/sda7 /xfs
# mkdir /xfs/test
# xfs_quota -xc 'off -g' /xfs <-- hangs up
# echo w > /proc/sysrq-trigger
# dmesg
SysRq : Show Blocked State
task PC stack pid father
xfs_quota D 0000000000000000 0 27574 2551 0x00000000
[snip]
Call Trace:
[<ffffffff81aaa21d>] schedule+0xad/0xc0
[<ffffffff81aa327e>] schedule_timeout+0x35e/0x3c0
[<ffffffff8114b506>] ? mark_held_locks+0x176/0x1c0
[<ffffffff810ad6c0>] ? call_timer_fn+0x2c0/0x2c0
[<ffffffffa0c25380>] ? xfs_qm_shrink_count+0x30/0x30 [xfs]
[<ffffffff81aa3306>] schedule_timeout_uninterruptible+0x26/0x30
[<ffffffffa0c26155>] xfs_qm_dquot_walk+0x235/0x260 [xfs]
[<ffffffffa0c059d8>] ? xfs_perag_get+0x1d8/0x2d0 [xfs]
[<ffffffffa0c05805>] ? xfs_perag_get+0x5/0x2d0 [xfs]
[<ffffffffa0b7707e>] ? xfs_inode_ag_iterator+0xae/0xf0 [xfs]
[<ffffffffa0c22280>] ? xfs_trans_free_dqinfo+0x50/0x50 [xfs]
[<ffffffffa0b7709f>] ? xfs_inode_ag_iterator+0xcf/0xf0 [xfs]
[<ffffffffa0c261e6>] xfs_qm_dqpurge_all+0x66/0xb0 [xfs]
[<ffffffffa0c2497a>] xfs_qm_scall_quotaoff+0x20a/0x5f0 [xfs]
[<ffffffffa0c2b8f6>] xfs_fs_set_xstate+0x136/0x180 [xfs]
[<ffffffff8136cf7a>] do_quotactl+0x53a/0x6b0
[<ffffffff812fba4b>] ? iput+0x5b/0x90
[<ffffffff8136d257>] SyS_quotactl+0x167/0x1d0
[<ffffffff814cf2ee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff81abcd19>] system_call_fastpath+0x16/0x1b
It's fine if we turn user quota off at first, then turn off other
kind of quotas if they are enabled since the group/project dquot
refcount is decreased to zero once the user quota if off. Otherwise,
those dquots refcount is non-zero due to the user dquot might refer
to them as hint(s). Hence, above operation cause an infinite loop
at xfs_qm_dquot_walk() while trying to purge dquot cache.
This problem has been around since Linux 3.4, it was introduced by:
[ b84a3a9675 xfs: remove the per-filesystem list of dquots ]
Originally we will release the group dquot pointers because the user
dquots maybe carrying around as a hint via xfs_qm_detach_gdquots().
However, with above change, there is no such work to be done before
purging group/project dquot cache.
In order to solve this problem, this patch introduces a special routine
xfs_qm_dqpurge_hints(), and it would release the group/project dquot
pointers the user dquots maybe carrying around as a hint, and then it
will proceed to purge the user dquot cache if requested.
Cc: stable@vger.kernel.org
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit df8052e7dae00bde6f21b40b6e3e1099770f3afc)
|
|
For CRC enabled v5 super block, change a file's ownership can simply
trigger an ASSERT failure at xfs_setattr_nonsize() if both group and
project quota are enabled, i.e,
[ 305.337609] XFS: Assertion failed: !XFS_IS_PQUOTA_ON(mp), file: fs/xfs/xfs_iops.c, line: 621
[ 305.339250] Kernel BUG at ffffffffa0a7fa32 [verbose debug info unavailable]
[ 305.383939] Call Trace:
[ 305.385536] [<ffffffffa0a7d95a>] xfs_setattr_nonsize+0x69a/0x720 [xfs]
[ 305.387142] [<ffffffffa0a7dea9>] xfs_vn_setattr+0x29/0x70 [xfs]
[ 305.388727] [<ffffffff811ca388>] notify_change+0x1a8/0x350
[ 305.390298] [<ffffffff811ac39d>] chown_common+0xfd/0x110
[ 305.391868] [<ffffffff811ad6bf>] SyS_fchownat+0xaf/0x110
[ 305.393440] [<ffffffff811ad760>] SyS_lchown+0x20/0x30
[ 305.394995] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 305.399870] RIP [<ffffffffa0a7fa32>] assfail+0x22/0x30 [xfs]
This fix adjust the assertion to check if the super block support both
quota inodes or not.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 5a01dd54f4a7fb513062070c5acef20d13cad980)
|
|
After the previous fix, there still has another ASSERT failure if turning
off any type of quota while fsstress is running at the same time.
Backtrace in this case:
[ 50.867897] XFS: Assertion failed: XFS_IS_GQUOTA_ON(mp), file: fs/xfs/xfs_qm.c, line: 2118
[ 50.867924] ------------[ cut here ]------------
... <snip>
[ 50.867957] Kernel BUG at ffffffffa0b55a32 [verbose debug info unavailable]
[ 50.867999] invalid opcode: 0000 [#1] SMP
[ 50.869407] Call Trace:
[ 50.869446] [<ffffffffa0bc408a>] xfs_qm_vop_create_dqattach+0x19a/0x2d0 [xfs]
[ 50.869512] [<ffffffffa0b9cc45>] xfs_create+0x5c5/0x6a0 [xfs]
[ 50.869564] [<ffffffffa0b5307c>] xfs_vn_mknod+0xac/0x1d0 [xfs]
[ 50.869615] [<ffffffffa0b531d6>] xfs_vn_mkdir+0x16/0x20 [xfs]
[ 50.869655] [<ffffffff811becd5>] vfs_mkdir+0x95/0x130
[ 50.869689] [<ffffffff811bf63a>] SyS_mkdirat+0xaa/0xe0
[ 50.869723] [<ffffffff811bf689>] SyS_mkdir+0x19/0x20
[ 50.869757] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f
[ 50.869793] Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 <snip>
[ 50.870003] RIP [<ffffffffa0b55a32>] assfail+0x22/0x30 [xfs]
[ 50.870050] RSP <ffff88002941fd60>
[ 50.879251] ---[ end trace c93a2b342341c65b ]---
We're hitting the ASSERT(XFS_IS_*QUOTA_ON(mp)) in xfs_qm_vop_create_dqattach(),
however the assertion itself is not right IMHO. While performing quota off, we
firstly clear the XFS_*QUOTA_ACTIVE bit(s) from struct xfs_mount without taking
any special locks, see xfs_qm_scall_quotaoff(). Hence there is no guarantee
that the desired quota is still active.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 37eb9706ebf5b99d14c6086cdeef2c2f73f9c9fb)
|
|
Fix the leak of kernel memory in xfs_dir2_node_removename()
when xfs_dir2_leafn_remove() returns an error code.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit ef701600fd26cace9d513ee174688a2b83832126)
|
|
This patch fixes a slab memory leak that sometimes can occur
for files with a very short lifespan. The problem occurs when
a dinode is deleted before it has gotten to the journal properly.
In the leak scenario, the bd object is pinned for journal
committment (queued to the metadata buffers queue: sd_log_le_buf)
but is subsequently unpinned and dequeued before it finds its way
to the ail or the revoke queue. In this rare circumstance, the bd
object needs to be freed from slab memory, or it is forgotten.
We have to be very careful how we do it, though, because
multiple processes can call gfs2_remove_from_journal. In order to
avoid double-frees, only the process that does the unpinning is
allowed to free the bd.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Function gfs2_remove_from_ail drops the reference on the bh via
brelse. This patch fixes a race condition whereby bh is deferenced
after the brelse when setting bd->bd_blkno = bh->b_blocknr;
Under certain rare circumstances, bh might be gone or reused,
and bd->bd_blkno is set to whatever that memory happens to be,
which is often 0. Later, in gfs2_trans_add_unrevoke, that bd fails
the test "bd->bd_blkno >= blkno" which causes it to never be freed.
The end result is that the bd is never freed from the bufdata cache,
which results in this error:
slab error in kmem_cache_destroy(): cache `gfs2_bufdata': Can't free all objects
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is a GFS2 version of Tejun's patch:
4f331f01b9c43bf001d3ffee578a97a1e0633eac
vfs: don't hold s_umount over close_bdev_exclusive() call
In this case its blkdev_put itself that is the issue and this
patch uses the same solution of dropping and retaking s_umount.
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
If the length of data to be read in readpage() is exactly
PAGE_CACHE_SIZE, the original code does not flush d-cache
for data consistency after finishing reading. This patches fixes
this.
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
commit b18825a7c8 (Put a small type field into struct dentry::d_flags)
put a type field into struct dentry::d_flags. __d_instantiate() set the
field by checking inode->i_mode. So we should initialize inode before
instantiating dentry when handling mds reply.
Fixes: http://tracker.ceph.com/issues/6930
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Merge patches from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcg: do not allow task about to OOM kill to bypass the limit
mm: memcg: fix race condition between memcg teardown and swapin
thp: move preallocated PTE page table on move_huge_pmd()
mfd/rtc: s5m: fix register updating by adding regmap for RTC
rtc: s5m: enable IRQ wake during suspend
rtc: s5m: limit endless loop waiting for register update
rtc: s5m: fix unsuccesful IRQ request during probe
drivers/rtc/rtc-s5m.c: fix info->rtc assignment
include/linux/kernel.h: make might_fault() a nop for !MMU
drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
procfs: also fix proc_reg_get_unmapped_area() for !MMU case
mm: memcg: do not declare OOM from __GFP_NOFAIL allocations
include/linux/hugetlb.h: make isolate_huge_page() an inline
|
|
Commit fad1a86e25e0 ("procfs: call default get_unmapped_area on
MMU-present architectures"), as its title says, took care of only the
MMU case, leaving the !MMU side still in the regressed state (returning
-EIO in all cases where pde->proc_fops->get_unmapped_area is NULL).
From the fad1a86e25e0 changelog:
"Commit c4fe24485729 ("sparc: fix PCI device proc file mmap(2)") added
proc_reg_get_unmapped_area in proc_reg_file_ops and
proc_reg_file_ops_no_compat, by which now mmap always returns EIO if
get_unmapped_area method is not defined for the target procfs file, which
causes regression of mmap on /proc/vmcore.
To address this issue, like get_unmapped_area(), call default
current->mm->get_unmapped_area on MMU-present architectures if
pde->proc_fops->get_unmapped_area, i.e. the one in actual file operation
in the procfs file, is not defined"
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org> [3.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This is a small collection of fixes. It was rebased this morning, but
I was just fixing signed-off-by tags with the wrong email"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix access_ok() check in btrfs_ioctl_send()
Btrfs: make sure we cleanup all reloc roots if error happens
Btrfs: skip building backref tree for uuid and quota tree when doing balance relocation
Btrfs: fix an oops when doing balance relocation
Btrfs: don't miss skinny extent items on delayed ref head contention
btrfs: call mnt_drop_write after interrupted subvol deletion
Btrfs: don't clear the default compression type
|
|
Pull nfsd reply cache bugfix from Bruce Fields:
"One bugfix for nfsd crashes"
* 'for-3.13' of git://linux-nfs.org/~bfields/linux:
nfsd: when reusing an existing repcache entry, unhash it first
|
|
When explicitly hashing the end of a string with the word-at-a-time
interface, we have to be careful which end of the word we pick up.
On big-endian CPUs, the upper-bits will contain the data we're after, so
ensure we generate our masks accordingly (and avoid hashing whatever
random junk may have been sitting after the string).
This patch adds a new dcache helper, bytemask_from_count, which creates
a mask appropriate for the CPU endianness.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs bugfixes from Ben Myers:
- fix for buffer overrun in agfl with growfs on v4 superblock
- return EINVAL if requested discard length is less than a block
- fix possible memory corruption in xfs_attrlist_by_handle()
* tag 'xfs-for-linus-v3.13-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: growfs overruns AGFL buffer on V4 filesystems
xfs: don't perform discard if the given range length is less than block size
xfs: underflow bug in xfs_attrlist_by_handle()
|
|
The closing parenthesis is in the wrong place. We want to check
"sizeof(*arg->clone_sources) * arg->clone_sources_count" instead of
"sizeof(*arg->clone_sources * arg->clone_sources_count)".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org
|
|
I hit an oops when merging reloc roots fails, the reason is that
new reloc roots may be added and we should make sure we cleanup
all reloc roots.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
relocation
Quota tree and UUID Tree is only cowed, they can not be snapshoted.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
I hit an oops when inserting reloc root into @reloc_root_tree(it can be
easily triggered when forcing cow for relocation root)
[ 866.494539] [<ffffffffa0499579>] btrfs_init_reloc_root+0x79/0xb0 [btrfs]
[ 866.495321] [<ffffffffa044c240>] record_root_in_trans+0xb0/0x110 [btrfs]
[ 866.496109] [<ffffffffa044d758>] btrfs_record_root_in_trans+0x48/0x80 [btrfs]
[ 866.496908] [<ffffffffa0494da8>] select_reloc_root+0xa8/0x210 [btrfs]
[ 866.497703] [<ffffffffa0495c8a>] do_relocation+0x16a/0x540 [btrfs]
This is because reloc root inserted into @reloc_root_tree is not within one
transaction,reloc root may be cowed and root block bytenr will be reused then
oops happens.We should update reloc root in @reloc_root_tree when cow reloc
root node, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Currently extent-tree.c:btrfs_lookup_extent_info() can miss the lookup
of skinny extent items. This can happen when the execution flow is the
following:
* We do an extent tree lookup and fail to find a skinny extent item;
* As a result, we attempt to see if a non-skinny extent item exists,
either by looking at previous item in the leaf or by doing another
full extent tree search;
* We have a transaction and then we check for a matching delayed ref
head in the transaction's delayed refs rbtree;
* We find such delayed ref head and then we try to lock it with a
call to mutex_trylock();
* The lock was contended so we jump to the label "again", which repeats
the extent tree search but for a non-skinny extent item, because we set
previously metadata variable to 0 and the search key to look for a
non-skinny extent-item;
* After the jump (and after releasing the transaction's delayed refs
lock), a skinny extent item might have been added to the extent tree
but we will miss it because metadata is set to 0 and the search key
is set for a non-skinny extent-item.
The fix here is to not reset metadata to 0 and to jump to the initial search
key setup if the delayed ref head is contended, instead of jumping directly
to the extent tree search label ("again").
This issue was found while investigating the issue reported at Bugzilla 64961.
David Sterba suspected this function was missing extent items, and that
this could be caused by the last change to this function, which was made
in the following patch:
[PATCH] Btrfs: optimize btrfs_lookup_extent_info()
(commit 74be9510876a66ad9826613ac8a526d26f9e7f01)
But in fact this issue already existed before, because after failing to find
a skinny extent item, the code set the search key for a non-skinny extent
item, and on contention of a matching delayed ref head it would not search
the extent tree for a skinny extent item anymore.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
If btrfs_ioctl_snap_destroy blocks on the mutex and the process is
killed, mnt_write count is unbalanced and leads to unmountable
filesystem.
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
We met a oops caused by the wrong compression type:
[ 556.512356] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 556.512370] IP: [<ffffffff811dbaa0>] __list_del_entry+0x1/0x98
[SNIP]
[ 556.512490] [<ffffffff811dbb44>] ? list_del+0xd/0x2b
[ 556.512539] [<ffffffffa05dd5ce>] find_workspace+0x97/0x175 [btrfs]
[ 556.512546] [<ffffffff813c14b5>] ? _raw_spin_lock+0xe/0x10
[ 556.512576] [<ffffffffa05de276>] btrfs_compress_pages+0x2d/0xa2 [btrfs]
[ 556.512601] [<ffffffffa05af060>] compress_file_range.constprop.54+0x1f2/0x4e8 [btrfs]
[ 556.512627] [<ffffffffa05af388>] async_cow_start+0x32/0x4d [btrfs]
[ 556.512655] [<ffffffffa05cc7a1>] worker_loop+0x144/0x4c3 [btrfs]
[ 556.512661] [<ffffffff81059404>] ? finish_task_switch+0x80/0xb8
[ 556.512689] [<ffffffffa05cc65d>] ? btrfs_queue_worker+0x244/0x244 [btrfs]
[ 556.512695] [<ffffffff8104fa4e>] kthread+0x8d/0x95
[ 556.512699] [<ffffffff81050000>] ? bit_waitqueue+0x34/0x7d
[ 556.512704] [<ffffffff8104f9c1>] ? __kthread_parkme+0x65/0x65
[ 556.512709] [<ffffffff813c7eec>] ret_from_fork+0x7c/0xb0
[ 556.512713] [<ffffffff8104f9c1>] ? __kthread_parkme+0x65/0x65
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o nodatacow <dev> <mnt>
# touch <mnt>/<file>
# chattr =c <mnt>/<file>
# dd if=/dev/zero of=<mnt>/<file> bs=1M count=10
It is because we cleared the default compression type when setting the
nodatacow. In fact, we needn't do it because we have used COMPRESS flag to
indicate if we need compressed the file data or not, needn't use the
variant -- compress_type -- in btrfs_info to do the same thing, and just
use it to hold the default compression type. Or we would get a wrong compress
type for a file whose own compress flag is set but the compress flag of its
filesystem is not set.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
The DRC code will attempt to reuse an existing, expired cache entry in
preference to allocating a new one. It'll then search the cache, and if
it gets a hit it'll then free the cache entry that it was going to
reuse.
The cache code doesn't unhash the entry that it's going to reuse
however, so it's possible for it end up designating an entry for reuse
and then subsequently freeing the same entry after it finds it. This
leads it to a later use-after-free situation and usually some list
corruption warnings or an oops.
Fix this by simply unhashing the entry that we intend to reuse. That
will mean that it's not findable via a search and should prevent this
situation from occurring.
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: g. artim <gartim@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This loop in xfs_growfs_data_private() is incorrect for V4
superblocks filesystems:
for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++)
agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK);
For V4 filesystems, we don't have a agfl header structure, and so
XFS_AGFL_SIZE() returns an entire sector's worth of entries, which
we then index from an offset into the sector. Hence: buffer overrun.
This problem was introduced in 3.10 by commit 77c95bba ("xfs: add
CRC checks to the AGFL") which changed the AGFL structure but failed
to update the growfs code to handle the different structures.
Fix it by using the correct offset into the buffer for both V4 and
V5 filesystems.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit b7d961b35b3ab69609aeea93f870269cb6e7ba4d)
|
|
For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
# fstrim -v -o 0 -l 100 /xfs7
/xfs7: 9811378176 bytes were trimmed
This issue can be triggered via xfstests/generic/288.
Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit f9fd0135610084abef6867d984e9951c3099950d)
|
