summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2015-11-06coredump: change zap_threads() and zap_process() to use for_each_thread()Oleg Nesterov1-14/+13
Change zap_threads() paths to use for_each_thread() rather than while_each_thread(). While at it, change zap_threads() to avoid the nested if's to make the code more readable and lessen the indentation. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kyle Walker <kwalker@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stanislav Kozina <skozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMPOleg Nesterov1-6/+6
task_will_free_mem() is wrong in many ways, and in particular the SIGNAL_GROUP_COREDUMP check is not reliable: a task can participate in the coredumping without SIGNAL_GROUP_COREDUMP bit set. change zap_threads() paths to always set SIGNAL_GROUP_COREDUMP even if other CLONE_VM processes can't react to SIGKILL. Fortunately, at least oom-kill case if fine; it kills all tasks sharing the same mm, so it should also kill the process which actually dumps the core. The change in prepare_signal() is not strictly necessary, it just ensures that the patch does not bring another subtle behavioural change. But it reminds us that this SIGNAL_GROUP_EXIT/COREDUMP case needs more changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kyle Walker <kwalker@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Stanislav Kozina <skozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)Oleg Nesterov1-1/+0
jffs2_garbage_collect_thread() does allow_signal(SIGCONT) for no reason, SIGCONT will wake a stopped task up even if it is ignored. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()Oleg Nesterov1-2/+1
jffs2_garbage_collect_thread() can race with SIGCONT and sleep in TASK_STOPPED state after it was already sent. Add the new helper, kernel_signal_stop(), which does this correctly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06signal: turn dequeue_signal_lock() into kernel_dequeue_signal()Oleg Nesterov1-2/+1
1. Rename dequeue_signal_lock() to kernel_dequeue_signal(). This matches another "for kthreads only" kernel_sigaction() helper. 2. Remove the "tsk" and "mask" arguments, they are always current and current->blocked. And it is simply wrong if tsk != current. 3. We could also remove the 3rd "siginfo_t *info" arg but it looks potentially useful. However we can simplify the callers if we change kernel_dequeue_signal() to accept info => NULL. 4. Remove _irqsave, it is never called from atomic context. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: fix gcc uninitialized-variable warnings in powerpc buildRyusuke Konishi3-4/+7
Some false positive warnings are reported for powerpc build. The following warnings are reported in http://kisskb.ellerman.id.au/kisskb/buildresult/12519703/ CC fs/nilfs2/super.o fs/nilfs2/super.c: In function 'nilfs_resize_fs': fs/nilfs2/super.c:376:2: warning: 'blocknr' may be used uninitialized in this function [-Wuninitialized] fs/nilfs2/super.c:362:11: note: 'blocknr' was declared here CC fs/nilfs2/recovery.o fs/nilfs2/recovery.c: In function 'nilfs_salvage_orphan_logs': fs/nilfs2/recovery.c:631:21: warning: 'sum' may be used uninitialized in this function [-Wuninitialized] fs/nilfs2/recovery.c:585:32: note: 'sum' was declared here fs/nilfs2/recovery.c: In function 'nilfs_search_super_root': fs/nilfs2/recovery.c:873:11: warning: 'sum' may be used uninitialized in this function [-Wuninitialized] Another similar warning is reported in http://kisskb.ellerman.id.au/kisskb/buildresult/12520079/ CC fs/nilfs2/btree.o fs/nilfs2/btree.c: In function 'nilfs_btree_convert_and_insert': include/asm-generic/bitops/non-atomic.h:105:20: warning: 'bh' may be used uninitialized in this function [-Wuninitialized] fs/nilfs2/btree.c:1859:22: note: 'bh' was declared here This cleans out these warnings by forcing the variables to be initialized. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: fix gcc unused-but-set-variable warningsRyusuke Konishi5-13/+3
Fix the following build warnings: $ make W=1 [...] CC [M] fs/nilfs2/btree.o fs/nilfs2/btree.c: In function 'nilfs_btree_split': fs/nilfs2/btree.c:923:8: warning: variable 'newptr' set but not used [-Wunused-but-set-variable] __u64 newptr; ^ fs/nilfs2/btree.c:922:8: warning: variable 'newkey' set but not used [-Wunused-but-set-variable] __u64 newkey; ^ CC [M] fs/nilfs2/dat.o fs/nilfs2/dat.c: In function 'nilfs_dat_prepare_end': fs/nilfs2/dat.c:158:8: warning: variable 'start' set but not used [-Wunused-but-set-variable] __u64 start; ^ CC [M] fs/nilfs2/segment.o fs/nilfs2/segment.c: In function 'nilfs_segctor_do_immediate_flush': fs/nilfs2/segment.c:2433:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] int err; ^ CC [M] fs/nilfs2/sufile.o fs/nilfs2/sufile.c: In function 'nilfs_sufile_alloc': fs/nilfs2/sufile.c:320:27: warning: variable 'ncleansegs' set but not used [-Wunused-but-set-variable] unsigned long nsegments, ncleansegs, nsus, cnt; ^ CC [M] fs/nilfs2/alloc.o fs/nilfs2/alloc.c: In function 'nilfs_palloc_prepare_alloc_entry': fs/nilfs2/alloc.c:478:38: warning: variable 'groups_per_desc_block' set but not used [-Wunused-but-set-variable] unsigned long n, entries_per_group, groups_per_desc_block; ^ Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: add tracepoints for analyzing reading and writing metadata filesHitoshi Mitake1-0/+6
This patch adds tracepoints for analyzing requests of reading and writing metadata files. The tracepoints cover every in-place mdt files (cpfile, sufile, and datfile). Example of tracing mdt_insert_new_block(): cp-14635 [000] ...1 30598.199309: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 155 cp-14635 [000] ...1 30598.199520: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 5 cp-14635 [000] ...1 30598.200828: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 253 Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: TK Kato <TK.Kato@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: add tracepoints for analyzing sufile manipulationHitoshi Mitake1-0/+8
This patch adds tracepoints which would be useful for analyzing segment usage from a perspective of high level sufile manipulation (check, alloc, free). sufile is an important in-place updated metadata file, so analyzing the behavior would be useful for performance turning. example of usage (a case of allocation): $ sudo bin/tpoint nilfs2:nilfs2_segment_usage_allocated Tracing nilfs2:nilfs2_segment_usage_allocated. Ctrl-C to end. segctord-17800 [002] ...1 10671.867294: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 2 segctord-17800 [002] ...1 10675.073477: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 3 Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benixon Dhas <benixon.dhas@wdc.com> Cc: TK Kato <TK.Kato@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: add a tracepoint for transaction eventsHitoshi Mitake1-1/+32
This patch adds a tracepoint for transaction events of nilfs. With the tracepoint, these events can be tracked: begin, abort, commit, trylock, lock, and unlock. Basically, these events have corresponding functions e.g. begin event corresponds nilfs_transaction_begin(). The unlock event is an exception. It corresponds to the iteration in nilfs_transaction_lock(). Only one tracepoint is introcued: nilfs2_transaction_transition. The above events are distinguished with newly introduced enum. With this tracepoint, we can analyse a critical section of segment constructoin. Sample output by tpoint of perf-tools: cp-4457 [000] ...1 63.266220: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 1 flags = 9 state = BEGIN cp-4457 [000] ...1 63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT cp-4457 [000] ...1 63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT segctord-4371 [001] ...1 68.261196: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK segctord-4371 [001] ...1 68.261280: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = LOCK segctord-4371 [001] ...1 68.261877: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 1 flags = 10 state = BEGIN segctord-4371 [001] ...1 68.262116: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = COMMIT segctord-4371 [001] ...1 68.265032: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = UNLOCK segctord-4371 [001] ...1 132.376847: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK This patch also does trivial cleaning of comma usage in collection stage transition event for consistent coding style. Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: add a tracepoint for tracking stage transition of segment constructionHitoshi Mitake2-21/+53
This patch adds a tracepoint for tracking stage transition of block collection in segment construction. With the tracepoint, we can analysis the behavior of segment construction in depth. It would be useful for bottleneck detection and debugging, etc. The tracepoint is created with the standard trace API of linux (like ext3, ext4, f2fs and btrfs). So we can analysis with existing tools easily. Of course, more detailed analysis will be possible if we can create nilfs specific analysis tools. Below is an example of event dump with Brendan Gregg's perf-tools (https://github.com/brendangregg/perf-tools). Time consumption between each stage can be obtained. $ sudo bin/tpoint nilfs2:nilfs2_collection_stage_transition Tracing nilfs2:nilfs2_collection_stage_transition. Ctrl-C to end. segctord-14875 [003] ...1 28311.067794: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_INIT segctord-14875 [003] ...1 28311.068139: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_GC segctord-14875 [003] ...1 28311.068139: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_FILE segctord-14875 [003] ...1 28311.068486: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_IFILE segctord-14875 [003] ...1 28311.068540: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_CPFILE segctord-14875 [003] ...1 28311.068561: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_SUFILE segctord-14875 [003] ...1 28311.068565: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_DAT segctord-14875 [003] ...1 28311.068573: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_SR segctord-14875 [003] ...1 28311.068574: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_DONE For capturing transition correctly, this patch adds wrappers for the member scnt of nilfs_cstage. With this change, every transition of the stage can produce trace event in a correct manner. Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: free unused dat file blocks during garbage collectionRyusuke Konishi2-17/+75
As a nilfs2 volume ages, the amount of available disk space decreases little by little due to bloat of DAT (disk address translation) metadata file. Even if we delete all files in a file system and free their block addresses from the DAT file through a garbage collection, empty DAT blocks are not freed. This fixes the issue by extending the deallocator of block addresses so that empty data blocks and empty bitmap blocks of DAT are deleted. The following comparison shows the effect of this patch. Each shows disk amount information of a nilfs2 volume that we cleaned out by deleting all files and running gc after having filled 90% of its capacity. Before: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 500105212 3022844 472072192 1% /test After: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 500105212 16380 475078656 1% /test Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: add helper functions to delete blocks from dat fileRyusuke Konishi1-0/+50
This adds delete functions for data blocks of metadata files using bitmap based allocator. nilfs_palloc_delete_entry_block() deletes an entry block (e.g. block storing dat entries), and nilfs_palloc_delete_bitmap_block() deletes a bitmap block, respectively. These helpers are intended to be used in the successive change on deallocator of block addresses ("nilfs2: free unused dat file blocks during garbage collection"). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: get rid of nilfs_palloc_group_is_in()Ryusuke Konishi1-19/+9
This unfolds nilfs_palloc_group_is_in() helper function into nilfs_palloc_freev() function to simplify a range check and an index calculation repeatedy performed in a loop of the function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: refactor nilfs_palloc_find_available_slot()Ryusuke Konishi1-27/+21
The current implementation of nilfs_palloc_find_available_slot() function is overkill. The underlying bit search routine is well optimized, so this uses it more simply in nilfs_palloc_find_available_slot(). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: do not call nilfs_mdt_bgl_lock() needlesslyRyusuke Konishi1-44/+40
In the bitmap based allocator implementation, nilfs_mdt_bgl_lock() helper is frequently used to get a spinlock protecting a target block group. This reduces its usage and simplifies arguments of some related functions by directly passing a pointer to the spinlock. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: use nilfs_warning() in allocator implementationRyusuke Konishi1-8/+12
This uses nilfs_warning() to replace "printk(KERN_WARNING ...);" in the bitmap based allocator implementation of nilfs2. The warning messages are modified to include the device name and the inode number in each message. This makes it clear which metadata file of which device has output warnings such as "entry number xxxx already freed". Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06nilfs2: drop null test before destroy functionsJulia Lawall1-8/+4
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06fs/jffs2/wbuf.c: remove stray semicolonAndrew Morton1-1/+1
Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06proc: actually make proc_fd_permission() thread-friendlyOleg Nesterov1-3/+11
The commit 96d0df79f264 ("proc: make proc_fd_permission() thread-friendly") fixed the access to /proc/self/fd from sub-threads, but introduced another problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd if generic_permission() fails. Change proc_fd_permission() to check same_thread_group(pid_task(), current). Fixes: 96d0df79f264 ("proc: make proc_fd_permission() thread-friendly") Reported-by: "Jin, Yihua" <yihua.jin@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06fs/proc/array.c: set overflow flag in case of errorAndy Shevchenko1-5/+5
For now in task_name() we ignore the return code of string_escape_str() call. This is not good if buffer suddenly becomes not big enough. Do the proper error handling there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE writebackJan Kara1-1/+2
sync_file_range(2) is documented to issue writeback only for pages that are not currently being written. After all the system call has been created for userspace to be able to issue background writeout and so waiting for in-flight IO is undesirable there. However commit ee53a891f474 ("mm: do_sync_mapping_range integrity fix") switched do_sync_mapping_range() and thus sync_file_range() to issue writeback in WB_SYNC_ALL mode since do_sync_mapping_range() was used by other code relying on WB_SYNC_ALL semantics. These days do_sync_mapping_range() went away and we can switch sync_file_range(2) back to issuing WB_SYNC_NONE writeback. That should help PostgreSQL avoid large latency spikes when flushing data in the background. Andres measured a 20% increase in transactions per second on an SSD disk. Signed-off-by: Jan Kara <jack@suse.com> Reported-by: Andres Freund <andres@anarazel.de> Tested-By: Andres Freund <andres@anarazel.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, fs: introduce mapping_gfp_constraint()Michal Hocko14-23/+23
There are many places which use mapping_gfp_mask to restrict a more generic gfp mask which would be used for allocations which are not directly related to the page cache but they are performed in the same context. Let's introduce a helper function which makes the restriction explicit and easier to track. This patch doesn't introduce any functional changes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman3-3/+3
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman9-21/+21
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds20-76/+204
Merge patch-bomb from Andrew Morton: - inotify tweaks - some ocfs2 updates (many more are awaiting review) - various misc bits - kernel/watchdog.c updates - Some of mm. I have a huge number of MM patches this time and quite a lot of it is quite difficult and much will be held over to next time. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) selftests: vm: add tests for lock on fault mm: mlock: add mlock flags to enable VM_LOCKONFAULT usage mm: introduce VM_LOCKONFAULT mm: mlock: add new mlock system call mm: mlock: refactor mlock, munlock, and munlockall code kasan: always taint kernel on report mm, slub, kasan: enable user tracking by default with KASAN=y kasan: use IS_ALIGNED in memory_is_poisoned_8() kasan: Fix a type conversion error lib: test_kasan: add some testcases kasan: update reference to kasan prototype repo kasan: move KASAN_SANITIZE in arch/x86/boot/Makefile kasan: various fixes in documentation kasan: update log messages kasan: accurately determine the type of the bad access kasan: update reported bug types for kernel memory accesses kasan: update reported bug types for not user nor kernel memory accesses mm/kasan: prevent deadlock in kasan reporting mm/kasan: don't use kasan shadow pointer in generic functions mm/kasan: MODULE_VADDR is not available on all archs ...
2015-11-05vfs: clear remainder of 'full_fds_bits' in dup_fd()Eric Biggers1-32/+32
This fixes a bug from commit f3f86e33dc3d ("vfs: Fix pathological performance case for __alloc_fd()"). v2: refactor to share fd bitmap copying code Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm, oom: add comment for why oom_adj existsDavid Rientjes1-0/+10
/proc/pid/oom_adj exists solely to avoid breaking existing userspace binaries that write to the tunable. Add a comment in the only possible location within the kernel tree to describe the situation and motivation for keeping it around. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm: clear_soft_dirty_pmd() requires THPLaurent Dufour1-7/+7
Don't build clear_soft_dirty_pmd() if transparent huge pages are not enabled. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm: clear pte in clear_soft_dirty()Laurent Dufour1-3/+4
As mentioned in the commit 56eecdb912b5 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit"), architectures like ppc64 don't do tlb flush in set_pte/pmd functions. So when dealing with existing pte in clear_soft_dirty, the pte must be cleared before being modified. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm/filemap.c: make global sync not clear error status of individual inodesJunichi Nomura2-2/+12
filemap_fdatawait() is a function to wait for on-going writeback to complete but also consume and clear error status of the mapping set during writeback. The latter functionality is critical for applications to detect writeback error with system calls like fsync(2)/fdatasync(2). However filemap_fdatawait() is also used by sync(2) or FIFREEZE ioctl, which don't check error status of individual mappings. As a result, fsync() may not be able to detect writeback error if events happen in the following order: Application System admin ---------------------------------------------------------- write data on page cache Run sync command writeback completes with error filemap_fdatawait() clears error fsync returns success (but the data is not on disk) This patch adds filemap_fdatawait_keep_errors() for call sites where writeback error is not handled so that they don't clear error status. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Fengguang Wu <fengguang.wu@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm: hugetlb: proc: add HugetlbPages field to /proc/PID/statusNaoya Horiguchi1-0/+1
Currently there's no easy way to get per-process usage of hugetlb pages, which is inconvenient because userspace applications which use hugetlb typically want to control their processes on the basis of how much memory (including hugetlb) they use. So this patch simply provides easy access to the info via /proc/PID/status. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Joern Engel <joern@logfs.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smapsNaoya Horiguchi1-0/+38
Currently /proc/PID/smaps provides no usage info for vma(VM_HUGETLB), which is inconvenient when we want to know per-task or per-vma base hugetlb usage. To solve this, this patch adds new fields for hugetlb usage like below: Size: 20480 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB AnonHugePages: 0 kB Shared_Hugetlb: 18432 kB Private_Hugetlb: 2048 kB Swap: 0 kB KernelPageSize: 2048 kB MMUPageSize: 2048 kB Locked: 0 kB VmFlags: rd wr mr mw me de ht [hughd@google.com: fix Private_Hugetlb alignment ] Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Joern Engel <joern@logfs.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-059p: do not overwrite return code when locking failsDominique Martinet1-1/+2
If the remote locking fail, we run a local vfs unlock that should work and return success to userland when we didn't actually lock at all. We need to tell the application that tried to lock that it didn't get it, not that all went well. Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: clean up unused variable in ocfs2_duplicate_clusters_by_page()Joseph Qi1-4/+1
readahead_pages in ocfs2_duplicate_clusters_by_page is defined but not used, so clean it up. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: add uuid to ocfs2 thread name for problem analysisJoseph Qi5-6/+10
A node can mount multiple ocfs2 volumes. And if thread names are same for each volume/domain, it will bring inconvenience when analyzing problems because we have to identify which volume/domain the messages belong to. Since thread name will be printed to messages, so add volume uuid or dlm name to thread name can benefit problem analysis. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an erroralex chen1-1/+10
In ocfs2_mknod_locked if '__ocfs2_mknod_locke d' returns an error, we should reclaim the inode successfully claimed above, otherwise, the inode never be reused. The case is described below: ocfs2_mknod ocfs2_mknod_locked ocfs2_claim_new_inode Successfully claim the inode __ocfs2_mknod_locked ocfs2_journal_access_di Failed because of -ENOMEM or other reasons, the inode lockres has not been initialized yet. iput(inode) ocfs2_evict_inode ocfs2_delete_inode ocfs2_inode_lock ocfs2_inode_lock_full_nested __ocfs2_cluster_lock Return -EINVAL because of the inode lockres has not been initialized. So the following operations are not performed ocfs2_wipe_inode ocfs2_remove_inode ocfs2_free_dinode ocfs2_free_suballoc_bits Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: fix race between mount and delete node/clusterJoseph Qi1-3/+16
There is a race case between mount and delete node/cluster, which will lead o2hb_thread to malfunctioning dead loop. o2hb_thread { o2nm_depend_this_node(); <<<<<< race window, node may have already been deleted, and then enter the loop, o2hb thread will be malfunctioning because of no configured nodes found. while (!kthread_should_stop() && !reg->hr_unclean_stop && !reg->hr_aborted_start) { } So check the return value of o2nm_depend_this_node() is needed. If node has been deleted, do not enter the loop and let mount fail. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: only take lock if dio entry when recover orphansJoseph Qi2-39/+49
We have no need to take inode mutex, rw and inode lock if it is not dio entry when recover orphans. Optimize it by adding a flag OCFS2_INODE_DIO_ORPHAN_ENTRY to ocfs2_inode_info to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: do not include dio entry in case of orphan scanJoseph Qi3-5/+15
dio entry will only do truncate in case of ORPHAN_NEED_TRUNCATE. So do not include it when doing normal orphan scan to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: improve performance for localallocJoseph Qi1-1/+4
Currently cluster allocation is always trying to find a victim chain (a chian has most space), and this may lead to poor performance because of discontiguous allocation in some scenarios. Our test case is block size 4k, cluster size 1M and mount option with localalloc=2048 (2G), since a gd is 32256M (about 31.5G) and a localalloc window is only 2G, creating 50G file will result in 2G from gd0, 2G from gd1, ... One way to improve performance is enlarge localalloc window size (max 31104M), but this will make end user feel that about 30G is suddenly "missing", and localalloc currently do not support steal, which means one node cannot use another node's localalloc even it is not used in fact. So using the last gd to record the allocation and continues with the gd if it has enough space for a localalloc window can make the allocation as more contiguous as possible. Our test result is below (evaluated in IOPS), which is using iometer running in VM, dynamic vhd virtual disk stored in ocfs2. IO model Original After Improved(%) 16K60%Write100%Random 703 876 24.59% 8K90%Write100%Random 735 827 12.59% 4K100%Write100%Random 859 915 6.52% 4K100%Read100%Random 2092 2600 24.30% Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Tested-by: Norton Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2: fill in the unused portion of the block with zeros by dio_zero_block()jiangyiwen1-0/+1
A simplified test case is (this case from Ryan): 1) dd if=/dev/zero of=/mnt/hello bs=512 count=1 oflag=direct; 2) truncate /mnt/hello -s 2097152 file 'hello' is not exist before test. After this command, file 'hello' should be all zero. But 512~4096 is some random data. Setting bh state to new when get a new block, if so, direct_io_worker()->dio_zero_block() will fill-in the unused portion of the block with zero. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05ocfs2_direct_IO_write() misses ocfs2_is_overwrite() error codeNorton.Zhu1-0/+1
If ocfs2_is_overwrite failed, ocfs2_direct_IO_write mays till return success to the caller. Signed-off-by: Norton.Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05logfs: fix build warningSudip Mukherjee1-2/+2
fs/logfs/dev_bdev.c: In function '__bdev_writeseg': include/linux/kernel.h:601:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ fs/logfs/dev_bdev.c:84:14: note: in expansion of macro 'min' max_pages = min(nr_pages, BIO_MAX_PAGES); fs/logfs/dev_bdev.c: In function 'do_erase': include/linux/kernel.h:601:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ fs/logfs/dev_bdev.c:174:14: note: in expansion of macro 'min' max_pages = min(nr_pages, BIO_MAX_PAGES); Lets use min_t and mention the type. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05inotify: actually check for invalid bits in sys_inotify_add_watch()Dave Hansen1-1/+13
The comment here says that it is checking for invalid bits. But, the mask is *actually* checking to ensure that _any_ valid bit is set, which is quite different. Without this check, an unexpected bit could get set on an inotify object. Since these bits are also interpreted by the fsnotify/dnotify code, there is the potential for an object to be mishandled inside the kernel. For instance, can we be sure that setting the dnotify flag FS_DN_RENAME on an inotify watch is harmless? Add the actual check which was intended. Retain the existing inotify bits are being added to the watch. Plus, this is existing behavior which would be nice to preserve. I did a quick sniff test that inotify functions and that my 'inotify-tools' package passes 'make check'. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05inotify: hide internal kernel bits from fdinfoDave Hansen1-1/+8
There was a report that my patch: inotify: actually check for invalid bits in sys_inotify_add_watch() broke CRIU. The reason is that CRIU looks up raw flags in /proc/$pid/fdinfo/* to figure out how to rebuild inotify watches and then passes those flags directly back in to the inotify API. One of those flags (FS_EVENT_ON_CHILD) is set in mark->mask, but is not part of the inotify API. It is used inside the kernel to _implement_ inotify but it is not and has never been part of the API. My patch above ensured that we only allow bits which are part of the API (IN_ALL_EVENTS). This broke CRIU. FS_EVENT_ON_CHILD is really internal to the kernel. It is set _anyway_ on all inotify marks. So, CRIU was really just trying to set a bit that was already set. This patch hides that bit from fdinfo. CRIU will not see the bit, not try to set it, and should work as before. We should not have been exposing this bit in the first place, so this is a good patch independent of the CRIU problem. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: Andrey Wagin <avagin@gmail.com> Acked-by: Andrey Vagin <avagin@openvz.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Eric Paris <eparis@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge branch 'next' of ↵Linus Torvalds11-33/+76
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem update from James Morris: "This is mostly maintenance updates across the subsystem, with a notable update for TPM 2.0, and addition of Jarkko Sakkinen as a maintainer of that" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits) apparmor: clarify CRYPTO dependency selinux: Use a kmem_cache for allocation struct file_security_struct selinux: ioctl_has_perm should be static selinux: use sprintf return value selinux: use kstrdup() in security_get_bools() selinux: use kmemdup in security_sid_to_context_core() selinux: remove pointless cast in selinux_inode_setsecurity() selinux: introduce security_context_str_to_sid selinux: do not check open perm on ftruncate call selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default KEYS: Merge the type-specific data with the payload data KEYS: Provide a script to extract a module signature KEYS: Provide a script to extract the sys cert list from a vmlinux file keys: Be more consistent in selection of union members used certs: add .gitignore to stop git nagging about x509_certificate_list KEYS: use kvfree() in add_key Smack: limited capability for changing process label TPM: remove unnecessary little endian conversion vTPM: support little endian guests char: Drop owner assignment from i2c_driver ...
2015-11-05Merge branch 'for-linus' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull userns hardlink capability check fix from Eric Biederman: "This round just contains a single patch. There has been a lot of other work this period but it is not quite ready yet, so I am pushing it until 4.5. The remaining change by Dirk Steinmetz wich fixes both Gentoo and Ubuntu containers allows hardlinks if we have the appropriate capabilities in the user namespace. Security wise it is really a gimme as the user namespace root can already call setuid become that user and create the hardlink" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: namei: permit linking with CAP_FOWNER in userns
2015-11-05Merge tag 'please-pull-pstore' of ↵Linus Torvalds8-26/+99
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore updates from Tony Luck: "Half dozen small cleanups plus change to allow pstore backend drivers to be unloaded" * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: fix code comment to match code efi-pstore: fix kernel-doc argument name pstore: Fix return type of pstore_is_mounted() pstore: add pstore unregister pstore: add a helper function pstore_register_kmsg pstore: add vmalloc error check
2015-11-05Merge tag 'for-f2fs-4.4' of ↵Linus Torvalds18-541/+791
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "Most part of the patches include enhancing the stability and performance of in-memory extent caches feature. In addition, it introduces several new features and configurable points: - F2FS_GOING_DOWN_METAFLUSH ioctl to test power failures - F2FS_IOC_WRITE_CHECKPOINT ioctl to trigger checkpoint by users - background_gc=sync mount option to do gc synchronously - periodic checkpoints - sysfs entry to control readahead blocks for free nids And the following bug fixes have been merged. - fix SSA corruption by collapse/insert_range - correct a couple of gc behaviors - fix the results of f2fs_map_blocks - fix error case handling of volatile/atomic writes" * tag 'for-f2fs-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (54 commits) f2fs: fix to skip shrinking extent nodes f2fs: fix error path of ->symlink f2fs: fix to clear GCed flag for atomic written page f2fs: don't need to submit bio on error case f2fs: fix leakage of inmemory atomic pages f2fs: refactor __find_rev_next_{zero}_bit f2fs: support fiemap for inline_data f2fs: flush dirty data for bmap f2fs: relocate the tracepoint for background_gc f2fs crypto: fix racing of accessing encrypted page among f2fs: export ra_nid_pages to sysfs f2fs: readahead for free nids building f2fs: support lower priority asynchronous readahead in ra_meta_pages f2fs: don't tag REQ_META for temporary non-meta pages f2fs: add a tracepoint for f2fs_read_data_pages f2fs: set GFP_NOFS for grab_cache_page f2fs: fix SSA updates resulting in corruption Revert "f2fs: do not skip dentry block writes" f2fs: add F2FS_GOING_DOWN_METAFLUSH to test power-failure f2fs: merge meta writes as many possible ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-01 15:39:47 +0000