summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2011-01-20cifs: fix unaligned access in check2ndT2 and coalesce_t2Jeff Layton1-19/+14
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: clean up unaligned accesses in validate_t2Jeff Layton1-21/+23
...and clean up function to reduce indentation. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: use get/put_unaligned functions to access ByteCountJeff Layton6-32/+65
It's possible that when we access the ByteCount that the alignment will be off. Most CPUs deal with that transparently, but there's usually some performance impact. Some CPUs raise an exception on unaligned accesses. Fix this by accessing the byte count using the get_unaligned and put_unaligned inlined functions. While we're at it, fix the types of some of the variables that end up getting returns from these functions. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: move time field in cifsInodeInfoJeff Layton1-5/+5
...and remove length qualifiers from bools. Before: /* size: 1176, cachelines: 19, members: 13 */ /* sum members: 1165, holes: 2, sum holes: 11 */ /* bit holes: 1, sum bit holes: 4 bits */ /* last cacheline: 24 bytes */ After: /* size: 1168, cachelines: 19, members: 13 */ /* last cacheline: 16 bytes */ ...savings of 8 bytes per inode. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: TCP_Server_Info dietJeff Layton2-19/+9
Remove fields that are completely unused, and rearrange struct according to recommendations by "pahole". Before: /* size: 1112, cachelines: 18, members: 49 */ /* sum members: 1086, holes: 8, sum holes: 26 */ /* bit holes: 1, sum bit holes: 7 bits */ /* last cacheline: 24 bytes */ After: /* size: 1072, cachelines: 17, members: 42 */ /* sum members: 1065, holes: 3, sum holes: 7 */ /* last cacheline: 48 bytes */ ...savings of 40 bytes per struct on x86_64. 21 bytes by field removal, and 19 by reorganizing to eliminate holes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20CIFS: Implement cifs_strict_readv (try #4)Pavel Shilovsky3-40/+84
Read from the cache if we have at least Level II oplock - otherwise read from the server. Add cifs_user_readv to let the client read into iovec buffers. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20CIFS: Implement cifs_file_strict_mmap (try #2)Pavel Shilovsky3-2/+18
Invalidate inode mapping if we don't have at least Level II oplock. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20CIFS: Implement cifs_strict_fsyncPavel Shilovsky4-12/+78
Invalidate inode mapping if we don't have at least Level II oplock in cifs_strict_fsync. Also remove filemap_write_and_wait call from cifs_fsync because it is previously called from vfs_fsync_range. Add file operations' structures for strict cache mode. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20CIFS: Make cifsFileInfo_put work with strict cache modePavel Shilovsky2-0/+9
On strict cache mode when we close the last file handle of the inode we should set invalid_mapping flag on this inode to prevent data coherency problem when we open it again but it has been modified on the server. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: mangle existing header for SMB_COM_NT_CANCELJeff Layton1-25/+38
The NT_CANCEL command looks just like the original command, except for a few small differences. The send_nt_cancel function however currently takes a tcon, which we don't have in SendReceive and SendReceive2. Instead of "respinning" the entire header for an NT_CANCEL, just mangle the existing header by replacing just the fields we need. This means we don't need a tcon and allows us to call it from other places. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: remove code for setting timeouts on requestsJeff Layton6-50/+17
Since we don't time out individual requests anymore, remove the code that we used to use for setting timeouts on different requests. Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20[CIFS] cifs: reconnect unresponsive serversSteve French3-5/+25
If the server isn't responding to echoes, we don't want to leave tasks hung waiting for it to reply. At that point, we'll want to reconnect so that soft mounts can return an error to userspace quickly. If the client hasn't received a reply after a specified number of echo intervals, assume that the transport is down and attempt to reconnect the socket. The number of echo_intervals to wait before attempting to reconnect is tunable via a module parameter. Setting it to 0, means that the client will never attempt to reconnect. The default is 5. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-01-20cifs: set up recurring workqueue job to do SMB echo requestsJeff Layton2-0/+30
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: add ability to send an echo requestJeff Layton4-1/+65
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: add cifs_call_asyncJeff Layton2-1/+62
Add a function that will send a request, and set up the mid for an async reply. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: allow for different handling of received responseJeff Layton4-35/+60
In order to incorporate async requests, we need to allow for a more general way to do things on receive, rather than just waking up a process. Turn the task pointer in the mid_q_entry into a callback function and a generic data pointer. When a response comes in, or the socket is reconnected, cifsd can call the callback function in order to wake up the process. The default is to just wake up the current process which should mean no change in behavior for existing code. Also, clean up the locking in cifs_reconnect. There doesn't seem to be any need to hold both the srv_mutex and GlobalMid_Lock when walking the list of mids. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: clean up sync_mid_resultJeff Layton1-17/+18
Make it use a switch statement based on the value of the midStatus. If the resp_buf is set, then MID_RESPONSE_RECEIVED is too. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: don't reconnect server when we don't get a responseJeff Layton1-3/+1
We only want to force a reconnect to the server under very limited and specific circumstances. Now that we have processes waiting indefinitely for responses, we shouldn't reach this point unless a reconnect is already in process. Thus, there's no reason to re-mark the server for reconnect here. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: wait indefinitely for responsesJeff Layton1-93/+17
The client should not be timing out on individual SMB requests. Too much of the state between client and server is tied to the state of the socket. If we time out requests and issue spurious disconnects then that comprimises data integrity. Instead of doing this complicated dance where we try to decide how long to wait for a response for particular requests, have the client instead wait indefinitely for a response. Also, use a TASK_KILLABLE sleep here so that fatal signals will break out of this waiting. Later patches will add support for detecting dead peers and forcing reconnects based on that. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: Use mask of ACEs for SID Everyone to calculate all three permissions ↵Shirish Pargaonkar1-2/+11
user, group, and other If a DACL has entries for ACEs for SID Everyone and Authenticated Users, factor in mask in respective entries during calculation of permissions for all three, user, group, and other. http://technet.microsoft.com/en-us/library/bb463216.aspx Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: Fix regression during share-level security mounts (Repost)Shirish Pargaonkar1-2/+2
NTLM response length was changed to 16 bytes instead of 24 bytes that are sent in Tree Connection Request during share-level security share mounts. Revert it back to 24 bytes. Reported-and-Tested-by: Grzegorz Ozanski <grzegorz.ozanski@intel.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Suresh Jayaraman <sjayaraman@suse.de> Cc: stable@kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19[CIFS] Update cifs version numberSteve French1-1/+1
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: move mid result processing into common functionJeff Layton1-78/+43
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: move locked sections out of DeleteMidQEntry and AllocMidQEntryJeff Layton1-17/+24
In later patches, we're going to need to have finer-grained control over the addition and removal of these structs from the pending_mid_q and we'll need to be able to call the destructor while holding the spinlock. Move the locked sections out of both routines and into the callers. Fix up current callers of DeleteMidQEntry to call a new routine that dequeues the entry and then destroys it. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: clean up accesses to midCountJeff Layton3-5/+5
It's an atomic_t and the code accesses the "counter" field in it directly instead of using atomic_read(). It also is sometimes accessed under a spinlock and sometimes not. Move it out of the spinlock since we don't need belt-and-suspenders for something that's just informational. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: make wait_for_free_request take a TCP_Server_Info pointerJeff Layton1-13/+13
The cifsSesInfo pointer is only used to get at the server. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: no need to mark smb_ses_list as cifs_demultiplex_thread is exitingJeff Layton1-41/+3
The TCP_Server_Info is refcounted and every SMB session holds a reference to it. Thus, smb_ses_list is always going to be empty when cifsd is coming down. This is dead code. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19cifs: don't fail writepages on -EAGAIN errorsJeff Layton1-12/+37
If CIFSSMBWrite2 returns -EAGAIN, then the error should be considered temporary. CIFS should retry the write instead of setting an error on the mapping and returning. For WB_SYNC_ALL, just retry the write immediately. In the WB_SYNC_NONE case, call redirty_page_for_writeback on all of the pages that didn't get written out and then move on. Also, fix up the handling of a short write with a successful return code. MS-CIFS says that 0 bytes_written means ENOSPC or EFBIG. It doesn't mention what a short, but non-zero write means, so for now treat it as we would an -EAGAIN return. Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19CIFS: Fix oplock break handling (try #2)Pavel Shilovsky4-13/+16
When we get oplock break notification we should set the appropriate value of OplockLevel field in oplock break acknowledge according to the oplock level held by the client in this time. As we only can have level II oplock or no oplock in the case of oplock break, we should be aware only about clientCanCacheRead field in cifsInodeInfo structure. Also fix bug connected with wrong interpretation of OplockLevel field during oplock break notification processing. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-18autofs4: clean ->d_release() and autofs4_free_ino() upAl Viro3-19/+16
The latter is called only when both ino and dentry are about to be freed, so cleaning ->d_fsdata and ->dentry is pointless. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: split autofs4_init_ino()Al Viro3-26/+15
split init_ino into new_ino and clean_ino; the former is what used to be init_ino(NULL, sbi), the latter is for cases where we passed non-NULL ino. Lose unused arguments. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: mkdir and symlink always get a dentry that had passed lookupAl Viro1-18/+10
... so ->d_fsdata will have been set up before we get there Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymoreAl Viro3-7/+5
Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: kill ->size in autofs_infoAl Viro3-6/+3
It's used only to pass the length of symlink body to autofs4_get_inode() in autofs4_dir_symlink(). We can bloody well set inode->i_size in autofs4_dir_symlink() directly and be done with that. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: pass mode to autofs4_get_inode() explicitlyAl Viro3-16/+15
In all cases we'd set inf->mode to know value just before passing it to autofs4_get_inode(). That kills the need to store it in autofs_info and pass it to autofs_init_ino() Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_mkroot() is not different from autofs4_init_ino()Al Viro1-12/+1
Kill it. Mind you, it's been an obfuscated call of autofs4_init_ino() ever since 2.3.99pre6-4... Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: keep symlink body in inode->i_privateAl Viro4-28/+9
gets rid of all ->free()/->u.symlink machinery in autofs; we simply keep symlink bodies in inode->i_private and free them in ->evict_inode(). Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix debug print in autofs4_lookup()Ian Kent1-1/+2
oz_mode isn't defined any more, use autofs4_oz_mode(sbi) instead. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18vfs - fix dentry ref count in do_lookup()Ian Kent1-1/+3
There is a ref count problem in fs/namei.c:do_lookup(). When walking in ref-walk mode, if follow_managed() returns a fail we need to drop dentry and possibly vfsmount. Clean up properly, as we do in the other caller of follow_managed(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix get_next_positive_dentry()Ian Kent1-2/+2
The initialization condition in fs/autofs4/expire.c:get_next_positive_dentry() appears to be incorrect. If prev == NULL I believe that root should be returned. Further down, at the current dentry check for it being simple_positive() it looks like the d_lock for dentry p should be dropped instead of dentry ret, otherwise when p is assinged to ret we end up with no lock on p and a lost lock on ret, which leads to a deadlock. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds29-623/+2490
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) Btrfs: forced readonly mounts on errors btrfs: Require CAP_SYS_ADMIN for filesystem rebalance Btrfs: don't warn if we get ENOSPC in btrfs_block_rsv_check btrfs: Fix memory leak in btrfs_read_fs_root_no_radix() btrfs: check NULL or not btrfs: Don't pass NULL ptr to func that may deref it. btrfs: mount failure return value fix btrfs: Mem leak in btrfs_get_acl() btrfs: fix wrong free space information of btrfs btrfs: make the chunk allocator utilize the devices better btrfs: restructure find_free_dev_extent() btrfs: fix wrong calculation of stripe size btrfs: try to reclaim some space when chunk allocation fails btrfs: fix wrong data space statistics fs/btrfs: Fix build of ctree Btrfs: fix off by one while setting block groups readonly Btrfs: Add BTRFS_IOC_SUBVOL_GETFLAGS/SETFLAGS ioctls Btrfs: Add readonly snapshots support Btrfs: Refactor btrfs_ioctl_snap_create() btrfs: Extract duplicate decompress code ...
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds7-80/+82
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: ecryptfs: remove unnecessary decrypt when extending a file ecryptfs: Fix ecryptfs_printk() size_t warnings fs/ecryptfs: Add printf format/argument verification and fix fallout ecryptfs: fixed testing of file descriptor flags ecryptfs: test lower_file pointer when lower_file_mutex is locked ecryptfs: missing initialization of the superblock 'magic' field ecryptfs: moved ECRYPTFS_SUPER_MAGIC definition to linux/magic.h ecryptfs: fix truncation error in ecryptfs_read_update_atime
2011-01-17xfs: Do not name variables "panic"Geert Uytterhoeven1-3/+3
On platforms that call panic() inside their BUG() macro (m68k/sun3, and all platforms that don't set HAVE_ARCH_BUG), compilation fails with: | fs/xfs/support/debug.c: In function ‘xfs_cmn_err’: | fs/xfs/support/debug.c:92: error: called object ‘panic’ is not a function as the local variable "panic" conflicts with the "panic()" function. Rename the local variable to resolve this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Btrfs: forced readonly mounts on errorsliubo7-2/+523
This patch comes from "Forced readonly mounts on errors" ideas. As we know, this is the first step in being more fault tolerant of disk corruptions instead of just using BUG() statements. The major content: - add a framework for generating errors that should result in filesystems going readonly. - keep FS state in disk super block. - make sure that all of resource will be freed and released at umount time. - make sure that fter FS is forced readonly on error, there will be no more disk change before FS is corrected. For this, we should stop write operation. After this patch is applied, the conversion from BUG() to such a framework can happen incrementally. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2-2/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: add cruid= mount option cifs: cFYI the entire error code in map_smb_to_linux_error
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds3-10/+9
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17ecryptfs: remove unnecessary decrypt when extending a fileFrank Swiderski1-8/+14
Removes an unecessary page decrypt from ecryptfs_begin_write when the page is beyond the current file size. Previously, the call to ecryptfs_decrypt_page would result in a read of 0 bytes, but still attempt to decrypt an entire page. This patch detects that case and merely zeros the page before marking it up-to-date. Signed-off-by: Frank Swiderski <fes@chromium.org> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-01-17ecryptfs: Fix ecryptfs_printk() size_t warningsTyler Hicks2-12/+12
Commit cb55d21f6fa19d8c6c2680d90317ce88c1f57269 revealed a number of missing 'z' length modifiers in calls to ecryptfs_printk() when printing variables of type size_t. This patch fixes those compiler warnings. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-01-17fs/ecryptfs: Add printf format/argument verification and fix falloutJoe Perches6-29/+30
Add __attribute__((format... to __ecryptfs_printk Make formats and arguments match. Add casts to (unsigned long long) for %llu. Signed-off-by: Joe Perches <joe@perches.com> [tyhicks: 80 columns cleanup and fixed typo] Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-01-17ecryptfs: fixed testing of file descriptor flagsRoberto Sassu1-2/+2
This patch replaces the check (lower_file->f_flags & O_RDONLY) with ((lower_file & O_ACCMODE) == O_RDONLY). Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 18:28:40 +0000