summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2013-04-09try a saner locking for pde_opener...Al Viro2-43/+23
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09deal with races between remove_proc_entry() and proc_reg_release()Al Viro2-53/+34
* serialize the call of ->release() on per-pdeo mutex * don't remove pdeo from per-pde list until we are through with it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: preparations for remove_proc_entry() race fixesAl Viro3-205/+133
* leave ->proc_fops alone; make ->pde_users negative instead * trim pde_opener * move relevant code in fs/proc/inode.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: Clean up huge if-statement in __proc_file_read()David Howells1-51/+47
Switch huge if-statement in __proc_file_read() around. This then puts the single line loop break immediately after the if-statement and allows us to de-indent the huge comment and make it take fewer lines. The code following the if-statement then follows naturally from the call to dp->read_proc(). Signed-off-by: David Howells <dhowells@redhat.com>
2013-04-09proc: Kill create_proc_entry()David Howells1-3/+6
Kill create_proc_entry() in favour of create_proc_read_entry(), proc_create() and proc_create_data(). Signed-off-by: David Howells <dhowells@redhat.com>
2013-04-09constify a bunch of struct file_operations instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro6-9/+9
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: kill ->write_proc()Al Viro1-25/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09new helper: single_open_size()Al Viro1-0/+18
Same as single_open(), but preallocates the buffer of given size. Doesn't make any sense for sizes up to PAGE_SIZE and doesn't make sense if output of show() exceeds PAGE_SIZE only rarely - seq_read() will take care of growing the buffer and redoing show(). If you _know_ that it will be large, it might make more sense to look into saner iterator, rather than go with single-shot one. If that's impossible, single_open_size() might be for you. Again, don't use that without a good reason; occasionally that's really the best way to go, but very often there are better solutions. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: don't allow to use proc_create, create_proc_entry, etc. for directoriesAl Viro2-34/+27
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09reiserfs: use proc_remove_subtree()Al Viro1-21/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: switch /proc/self away from proc_dir_entryAl Viro5-12/+55
Just have it pinned in dcache all along and let procfs ->kill_sb() drop it before kill_anon_super(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09mode_t, whack-a-mole at 11...Al Viro3-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of the last free_pipe_info() callersAl Viro1-12/+6
and rename __free_pipe_info() to free_pipe_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of alloc_pipe_info() argumentAl Viro2-4/+4
not used anymore Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of pipe->inodeAl Viro3-6/+5
it's used only as a flag to distinguish normal pipes/FIFOs from the internal per-task one used by file-to-file splice. And pipe->files would work just as well for that purpose... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09introduce variants of pipe_lock/pipe_unlock for real pipes/FIFOsAl Viro1-15/+25
fs/pipe.c file_operations methods *know* that pipe is not an internal one; no need to check pipe->inode for those callers. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: set file->private_data to ->i_pipeAl Viro2-11/+10
simplify get_pipe_info(), while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: don't use ->i_mutexAl Viro2-6/+5
now it can be done - put mutex into pipe_inode_info, use it instead of ->i_mutex Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: take allocation and freeing of pipe_inode_info out of ->i_mutexAl Viro1-21/+51
* new field - pipe->files; number of struct file over that pipe (all sharing the same inode, of course); protected by inode->i_lock. * pipe_release() decrements pipe->files, clears inode->i_pipe when if the counter has reached 0 (all under ->i_lock) and, in that case, frees pipe after having done pipe_unlock() * fifo_open() starts with grabbing ->i_lock, and either bumps pipe->files if ->i_pipe was non-NULL or allocates a new pipe (dropping and regaining ->i_lock) and rechecks ->i_pipe; if it's still NULL, inserts new pipe there, otherwise bumps ->i_pipe->files and frees the one we'd allocated. At that point we know that ->i_pipe is non-NULL and won't go away, so we can do pipe_lock() on it and proceed as we used to. If we end up failing, decrement pipe->files and if it reaches 0 clear ->i_pipe and free the sucker after pipe_unlock(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: preparation to new locking rulesAl Viro1-23/+15
* use the fact that file_inode(file)->i_pipe doesn't change while the file is opened - no locks needed to access that. * switch to pipe_lock/pipe_unlock where it's easy to do Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: switch wait_for_partner() and wake_up_partner() to pipe_inode_infoAl Viro1-9/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: fold file_operations instances in oneAl Viro3-190/+38
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09fold fifo.c into pipe.cAl Viro3-154/+139
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09lift sb_start_write out of ->splice_write()Al Viro1-6/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09lift sb_start_write into default_file_splice_write()Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09lift sb_start_write() out of ->write()Al Viro5-10/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09switch compat readv/writev variants to COMPAT_SYSCALL_DEFINEAl Viro3-192/+195
... and take to fs/read_write.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09f2fs: use mnt_want_write_file() in ioctlAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09lift sb_start_write/sb_end_write out of ->aio_write()Al Viro9-20/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09hpfs: move setting hpfs-private i_dirty to ->write_end()Al Viro1-16/+20
... so that writev(2) doesn't miss it. Get rid of hpfs_file_write(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09reiserfs: don't wank with EFBIG before calling do_sync_write()Al Viro1-60/+1
look for file_capable() in there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09fold release_mounts() into namespace_unlock()Al Viro1-23/+30
... and provide namespace_lock() as a trivial wrapper; switch to those two consistently. Result is patterned after rtnl_lock/rtnl_unlock pair. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09switch unlock_mount() to namespace_unlock(), convert all umount_tree() callersAl Viro3-24/+16
which allows to kill the last argument of umount_tree() and make release_mounts() static. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09more conversions to namespace_unlock()Al Viro1-14/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of the second argument of shrink_submounts()Al Viro1-4/+4
... it's always &unmounted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09saner umount_tree()/release_mounts(), part 1Al Viro1-4/+13
global list of release_mounts() fodder, protected by namespace_sem; eventually, all umount_tree() callers will use it as kill list. Helper picking the contents of that list, releasing namespace_sem and doing release_mounts() on what it got. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of full-hash scan on detaching vfsmountsAl Viro4-97/+149
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09mnt: release locks on error path in do_loopbackAndrey Vagin1-1/+1
do_loopback calls lock_mount(path) and forget to unlock_mount if clone_mnt or copy_mnt fails. [ 77.661566] ================================================ [ 77.662939] [ BUG: lock held when returning to user space! ] [ 77.664104] 3.9.0-rc5+ #17 Not tainted [ 77.664982] ------------------------------------------------ [ 77.666488] mount/514 is leaving the kernel with locks still held! [ 77.668027] 2 locks held by mount/514: [ 77.668817] #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [<ffffffff811cca22>] lock_mount+0x32/0xe0 [ 77.671755] #1: (&namespace_sem){+++++.}, at: [<ffffffff811cca3a>] lock_mount+0x4a/0xe0 Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: add proc_remove_subtree()Al Viro1-30/+89
just what it sounds like; do that only to procfs subtrees you've created - doing that to something shared with another driver is not only antisocial, but might cause interesting races with proc_create() and its ilk. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09ecryptfs: close rmmod raceAl Viro1-12/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26Merge branch 'for-linus' of ↵Linus Torvalds4-6/+44
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "stable fodder; assorted deadlock fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vt: synchronize_rcu() under spinlock is not nice... Nest rename_lock inside vfsmount_lock Don't bother with redoing rw_verify_area() from default_file_splice_from()
2013-03-26Nest rename_lock inside vfsmount_lockAl Viro1-5/+11
... lest we get livelocks between path_is_under() and d_path() and friends. The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks; it is possible to have thread B spin on attempt to take lock shared while thread A is already holding it shared, if B is on lower-numbered CPU than A and there's a thread C spinning on attempt to take the same lock exclusive. As the result, we need consistent ordering between vfsmount_lock (lglock) and rename_lock (seq_lock), even though everything that takes both is going to take vfsmount_lock only shared. Spotted-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26Merge tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-32/+89
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 idmapper regression - Fix an Oops in the pNFS blocks client - Fix up various issues with pNFS layoutcommit - Ensure correct read ordering of variables in rpc_wake_up_task_queue_locked * tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked NFSv4.1: Add a helper pnfs_commit_and_return_layout NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn NFSv4.1: Fix a race in pNFS layoutcommit pnfs-block: removing DM device maybe cause oops when call dev_remove NFSv4: Fix the string length returned by the idmapper
2013-03-25Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-6/+8
Pull nfsd bugfixes from J Bruce Fields: "Fixes for a couple mistakes in the new DRC code. And thanks to Kent Overstreet for noticing we've been sync'ing the wrong range on stable writes since 3.8." * 'for-3.9' of git://linux-nfs.org/~bfields/linux: nfsd: fix bad offset use nfsd: fix startup order in nfsd_reply_cache_init nfsd: only unhash DRC entries that are in the hashtable
2013-03-22nfsd: fix bad offset useKent Overstreet1-1/+2
vfs_writev() updates the offset argument - but the code then passes the offset to vfs_fsync_range(). Since offset now points to the offset after what was just written, this is probably not what was intended Introduced by face15025ffdf664de95e86ae831544154d26c9c "nfsd: use vfs_fsync_range(), not O_SYNC, for stable writes". Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: stable@vger.kernel.org Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-22vfs,proc: guarantee unique inodes in /procLinus Torvalds1-3/+3
Dave Jones found another /proc issue with his Trinity tool: thanks to the namespace model, we can have multiple /proc dentries that point to the same inode, aliasing directories in /proc/<pid>/net/ for example. This ends up being a total disaster, because it acts like hardlinked directories, and causes locking problems. We rely on the topological sort of the inodes pointed to by dentries, and if we have aliased directories, that odering becomes unreliable. In short: don't do this. Multiple dentries with the same (directory) inode is just a bad idea, and the namespace code should never have exposed things this way. But we're kind of stuck with it. This solves things by just always allocating a new inode during /proc dentry lookup, instead of using "iget_locked()" to look up existing inodes by superblock and number. That actually simplies the code a bit, at the cost of potentially doing more inode [de]allocations. That said, the inode lookup wasn't free either (and did a lot of locking of inodes), so it is probably not that noticeable. We could easily keep the old lookup model for non-directory entries, but rather than try to be excessively clever this just implements the minimal and simplest workaround for the problem. Reported-and-tested-by: Dave Jones <davej@redhat.com> Analyzed-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-21Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-56/+43
Pull CIFS fixes from Steve French: "Three small CIFS Fixes (the most important of the three fixes a recent problem authenticating to Windows 8 using cifs rather than SMB2)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: ignore everything in SPNEGO blob after mechTypes cifs: delay super block destruction until all cifsFileInfo objects are gone cifs: map NT_STATUS_SHARING_VIOLATION to EBUSY instead of ETXTBSY
2013-03-21Merge tag 'ext4_for_linue' of ↵Linus Torvalds12-81/+540
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix a number of regression and other bugs in ext4, most of which were relatively obscure cornercases or races that were found using regression tests." * tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: fix data=journal fast mount/umount hang ext4: fix ext4_evict_inode() racing against workqueue processing code ext4: fix memory leakage in mext_check_coverage ext4: use s_extent_max_zeroout_kb value as number of kb ext4: use atomic64_t for the per-flexbg free_clusters count jbd2: fix use after free in jbd2_journal_dirty_metadata() ext4: reserve metadata block for every delayed write ext4: update reserved space after the 'correction' ext4: do not use yield() ext4: remove unused variable in ext4_free_blocks() ext4: fix WARN_ON from ext4_releasepage() ext4: fix the wrong number of the allocated blocks in ext4_split_extent() ext4: update extent status tree after an extent is zeroed out ext4: fix wrong m_len value after unwritten extent conversion ext4: add self-testing infrastructure to do a sanity check ext4: avoid a potential overflow in ext4_es_can_be_merged() ext4: invalidate extent status tree during extent migration ext4: remove unnecessary wait for extent conversion in ext4_fallocate() ext4: add warning to ext4_convert_unwritten_extents_endio ext4: disable merging of uninitialized extents ...
2013-03-21cifs: ignore everything in SPNEGO blob after mechTypesJeff Layton1-48/+5
We've had several reports of people attempting to mount Windows 8 shares and getting failures with a return code of -EINVAL. The default sec= mode changed recently to sec=ntlmssp. With that, we expect and parse a SPNEGO blob from the server in the NEGOTIATE reply. The current decode_negTokenInit function first parses all of the mechTypes and then tries to parse the rest of the negTokenInit reply. The parser however currently expects a mechListMIC or nothing to follow the mechTypes, but Windows 8 puts a mechToken field there instead to carry some info for the new NegoEx stuff. In practice, we don't do anything with the fields after the mechTypes anyway so I don't see any real benefit in continuing to parse them. This patch just has the kernel ignore the fields after the mechTypes. We'll probably need to reinstate some of this if we ever want to support NegoEx. Reported-by: Jason Burgess <jason@jacknife2.dns2go.com> Reported-by: Yan Li <elliot.li.tech@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-04 12:39:14 +0000