| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make it so that we can reserve rt blocks with the xfs_trans_alloc_inode
wrapper function, then convert a few more callsites.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a new helper xfs_trans_alloc_inode that allocates a transaction,
locks and joins an inode to it, and then reserves the appropriate amount
of quota against that transction. Then replace all the open-coded
idioms with a single call to this helper.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Modify xfs_trans_reserve_quota_nblks so that we can reserve data and
realtime blocks from the dquot at the same time. This change has the
theoretical side effect that for allocations to realtime files we will
reserve from the dquot both the number of rtblocks being allocated and
the number of bmbt blocks that might be needed to add the mapping.
However, since the mount code disables quota if it finds a realtime
device, this should not result in any behavior changes.
Now that we've moved the inode creation callers away from using the
_nblks function, we can repurpose the (now unused) ninos argument for
realtime blocks, so make that change. This also replaces the flags
argument with a boolean parameter to force the reservation since we
don't need to distinguish between data and rt quota reservations any
more, and the only flag being passed in was FORCE_RES.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Fix some build warnings on gcc 10.2 when quotas are disabled.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a proper helper so that inode creation calls can reserve quota
with a dedicated function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
xfs_trans_cancel will release all the quota resources that were reserved
on behalf of the transaction, so get rid of the explicit unreserve step.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a couple of convenience wrappers for creating and deleting quota
block reservations against future changes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Convert a few xfs_trans_*reserve* callsites that are open-coding other
convenience functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In commit 3b0fe47805802, we reduced the free space requirement to
perform a pre-write unwritten extent conversion on an S_DAX file. Since
we're not actually allocating any space, the logic goes, we only need
enough reservation to handle shape changes in the bmbt.
The same logic should have been applied to quota -- we're not allocating
any space, so we only need to reserve enough quota to handle the bmbt
shape changes.
Fixes: 3b0fe4780580 ("xfs: Don't use reserved blocks for data blocks with DAX")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
While refactoring the quota code to create a function to allocate inode
change transactions, I noticed that xfs_qm_vop_chown_reserve does more
than just make reservations: it also *modifies* the incore counts
directly to handle the owner id change for the delalloc blocks.
I then observed that the fssetxattr code continues validating input
arguments after making the quota reservation but before dirtying the
transaction. If the routine decides to error out, it fails to undo the
accounting switch! This leads to incorrect quota reservation and
failure down the line.
We can fix this by making the reservation function do only that -- for
the new dquot, it reserves ondisk and delalloc blocks to the
transaction, and the old dquot hangs on to its incore reservation for
now. Once we actually switch the dquots, we can then update the incore
reservations because we've dirtied the transaction and it's too late to
turn back now.
No fixes tag because this has been broken since the start of git.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Attempt shared locking for unaligned DIO, but only if the the
underlying extent is already allocated and in written state. On
failure, retry with the existing exclusive locking.
Test case is fio randrw of 512 byte IOs using AIO and an iodepth of
32 IOs.
Vanilla:
READ: bw=4560KiB/s (4670kB/s), 4560KiB/s-4560KiB/s (4670kB/s-4670kB/s), io=134MiB (140MB), run=30001-30001msec
WRITE: bw=4567KiB/s (4676kB/s), 4567KiB/s-4567KiB/s (4676kB/s-4676kB/s), io=134MiB (140MB), run=30001-30001msec
Patched:
READ: bw=37.6MiB/s (39.4MB/s), 37.6MiB/s-37.6MiB/s (39.4MB/s-39.4MB/s), io=1127MiB (1182MB), run=30002-30002msec
WRITE: bw=37.6MiB/s (39.4MB/s), 37.6MiB/s-37.6MiB/s (39.4MB/s-39.4MB/s), io=1128MiB (1183MB), run=30002-30002msec
That's an improvement from ~18k IOPS to a ~150k IOPS, which is
about the IOPS limit of the VM block device setup I'm testing on.
4kB block IO comparison:
READ: bw=296MiB/s (310MB/s), 296MiB/s-296MiB/s (310MB/s-310MB/s), io=8868MiB (9299MB), run=30002-30002msec
WRITE: bw=296MiB/s (310MB/s), 296MiB/s-296MiB/s (310MB/s-310MB/s), io=8878MiB (9309MB), run=30002-30002msec
Which is ~150k IOPS, same as what the test gets for sub-block
AIO+DIO writes with this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: rebased, split unaligned from nowait]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The unaligned DIO write path is more convolted than the normal path,
and we are about to make it more complex. Keep the block aligned
fast path dio write code trim and simple by splitting out the
unaligned DIO code from it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: rebased, fixed a few minor nits]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use a more suitable event class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Pass the iocb and iov_iter to the tracepoints and leave decoding of
actual arguments to the code only run when tracing is enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The iomap code has been designed from the start not to do magic fallback,
so remove the assert in preparation for further code cleanups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Drop a few pointless aio_ prefixes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Ensure we don't block on the iolock, or waiting for I/O in
xfs_file_aio_write_checks if the caller asked to avoid that.
Fixes: 29a5d29ec181 ("xfs: nowait aio support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add a helper to factor out the nowait locking logical for the read/write
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
With both CONFIG_XFS_DEBUG and CONFIG_XFS_WARN disabled, the only reference to
local variable "error" in xfs_bmap_compute_alignments() gets eliminated during
pre-processing stage of the compilation process. This causes the compiler to
generate a "set but not used" warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The log variable is only used in kernels with asserts enabled.
Remove it and open code the dereference to avoid unused variable
warnings.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Enable idmapped mounts for xfs. This basically just means passing down
the user_namespace argument from the VFS methods down to where it is
passed to the relevant helpers.
Note that full-filesystem bulkstat is not supported from inside idmapped
mounts as it is an administrative operation that acts on the whole file
system. The limitation is not applied to the bulkstat single operation
that just operates on a single inode.
Link: https://lore.kernel.org/r/20210121131959.646623-40-christian.brauner@ubuntu.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
In order to determine whether a caller holds privilege over a given
inode the capability framework exposes the two helpers
privileged_wrt_inode_uidgid() and capable_wrt_inode_uidgid(). The former
verifies that the inode has a mapping in the caller's user namespace and
the latter additionally verifies that the caller has the requested
capability in their current user namespace.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped inodes. If the initial user namespace is passed all
operations are a nop so non-idmapped mounts will not see a change in
behavior.
Link: https://lore.kernel.org/r/20210121131959.646623-5-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Pass a set of flags to iomap_dio_rw instead of the boolean
wait_for_completion argument. The IOMAP_DIO_FORCE_WAIT flag
replaces the wait_for_completion, but only needs to be passed
when the iocb isn't synchronous to start with to simplify the
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[djwong: rework xfs_file.c so that we can push iomap changes separately]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
If the inode is not pinned by the time fsync is called we don't need the
ilock to protect against concurrent clearing of ili_fsync_fields as the
inode won't need a log flush or clearing of these fields. Not taking
the iolock allows for full concurrency of fsync and thus O_DSYNC
completions with io_uring/aio write submissions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Factor out the log syncing logic into two helpers to make the code easier
to read and more maintainable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Filesystem freeze cleans the log and immediately redirties it so log
recovery runs if a crash occurs after the filesystem is frozen. Now
that log quiesce covers the log, there is no need to clean the log and
redirty it to trigger log recovery because covering has the same
effect. Update xfs_fs_freeze() to quiesce (and thus cover) the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
xfs_quiesce_attr() is now a wrapper for xfs_log_clean(). Remove it
and call xfs_log_clean() directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
These two calls are repeated at the beginning of xfs_log_quiesce().
Drop them from xfs_quiesce_attr().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
xfs_log_sbcount() calls xfs_sync_sb() to sync superblock counters to
disk when lazy superblock accounting is enabled. This occurs on
unmount, freeze, and read-only (re)mount and ensures the final
values are calculated and persisted to disk before each form of
quiesce completes.
Now that log covering occurs in all of these contexts and uses the
same xfs_sync_sb() mechanism to update log state, there is no need
to log the superblock separately for any reason. Update the log
quiesce path to sync the superblock at least once for any mount
where lazy superblock accounting is enabled. If the log is already
covered, it will remain in the covered state. Otherwise, the next
sync as part of the normal covering sequence will carry the
associated superblock update with it. Remove xfs_log_sbcount() now
that it is no longer needed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
Now that log covering occurs on quiesce, we'd like to reuse the
underlying superblock sync for final superblock updates. This
includes things like lazy superblock counter updates, log feature
incompat bits in the future, etc. One quirk to this approach is that
once the log is in the IDLE (i.e. already covered) state, any
subsequent log write resets the state back to NEED. This means that
a final superblock sync to an already covered log requires two more
sb syncs to return the log back to IDLE again.
For example, if a lazy superblock enabled filesystem is mount cycled
without any modifications, the unmount path syncs the superblock
once and writes an unmount record. With the desired log quiesce
covering behavior, we sync the superblock three times at unmount
time: once for the lazy superblock counter update and twice more to
cover the log. By contrast, if the log is active or only partially
covered at unmount time, a final superblock sync would doubly serve
as the one or two remaining syncs required to cover the log.
This duplicate covering sequence is unnecessary because the
filesystem remains consistent if a crash occurs at any point. The
superblock will either be recovered in the event of a crash or
written back before the log is quiesced and potentially cleaned with
an unmount record.
Update the log covering state machine to remain in the IDLE state if
additional covering checkpoints pass through the log. This
facilitates final superblock updates (such as lazy superblock
counters) via a single sb sync without losing covered status. This
provides some consistency with the active and partially covered
cases and also avoids harmless, but spurious checkpoints when
quiescing the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
The log quiesce mechanism historically terminates by marking the log
clean with an unmount record. The primary objective is to indicate
that log recovery is no longer required after the quiesce has
flushed all in-core changes and written back filesystem metadata.
While this is perfectly fine, it is somewhat hacky as currently used
in certain contexts. For example, filesystem freeze quiesces (i.e.
cleans) the log and immediately redirties it with a dummy superblock
transaction to ensure that log recovery runs in the event of a
crash.
While this functions correctly, cleaning the log from freeze context
is clearly superfluous given the current redirtying behavior.
Instead, the desired behavior can be achieved by simply covering the
log. This effectively retires all on-disk log items from the active
range of the log by issuing two synchronous and sequential dummy
superblock update transactions that serve to update the on-disk log
head and tail. The subtle difference is that the log technically
remains dirty due to the lack of an unmount record, though recovery
is effectively a no-op due to the content of the checkpoints being
clean (i.e. the unmodified on-disk superblock).
Log covering currently runs in the background and only triggers once
the filesystem and log has idled. The purpose of the background
mechanism is to prevent log recovery from replaying the most
recently logged items long after those items may have been written
back. In the quiesce path, the log has been deliberately idled by
forcing the log and pushing the AIL until empty in a context where
no further mutable filesystem operations are allowed. Therefore, we
can cover the log as the final step in the log quiesce codepath to
reflect that all previously active items have been successfully
written back.
This facilitates selective log covering from certain contexts (i.e.
freeze) that only seek to quiesce, but not necessarily clean the
log. Note that as a side effect of this change, log covering now
occurs when cleaning the log as well. This is harmless, facilitates
subsequent cleanups, and is mostly temporary as various operations
switch to use explicit log covering.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
Log quiesce is currently associated with cleaning the log, which is
accomplished by writing an unmount record as the last step of the
quiesce sequence. The quiesce codepath is a bit convoluted in this
regard due to how it is reused from various contexts. In preparation
to create separate log cleaning and log covering interfaces, lift
the write of the unmount record into a new cleaning helper and call
that wherever xfs_log_quiesce() is currently invoked. No functional
changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The log covering helper checks whether the filesystem is writable to
determine whether to cover the log. The helper is currently only
called from the background log worker. In preparation to reuse the
helper from freezing contexts, lift the check into xfs_log_worker().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_log_sbcount() syncs the superblock specifically to accumulate
the in-core percpu superblock counters and commit them to disk. This
is required to maintain filesystem consistency across quiesce
(freeze, read-only mount/remount) or unmount when lazy superblock
accounting is enabled because individual transactions do not update
the superblock directly.
This mechanism works as expected for writable mounts, but
xfs_log_sbcount() skips the update for read-only mounts. Read-only
mounts otherwise still allow log recovery and write out an unmount
record during log quiesce. If a read-only mount performs log
recovery, it can modify the in-core superblock counters and write an
unmount record when the filesystem unmounts without ever syncing the
in-core counters. This leaves the filesystem with a clean log but in
an inconsistent state with regard to lazy sb counters.
Update xfs_log_sbcount() to use the same logic
xfs_log_unmount_write() uses to determine when to write an unmount
record. This ensures that lazy accounting is always synced before
the log is cleaned. Refactor this logic into a new helper to
distinguish between a writable filesystem and a writable log.
Specifically, the log is writable unless the filesystem is mounted
with the norecovery mount option, the underlying log device is
read-only, or the filesystem is shutdown. Drop the freeze state
check because the update is already allowed during the freezing
process and no context calls this function on an already frozen fs.
Also, retain the shutdown check in xfs_log_unmount_write() to catch
the case where the preceding log force might have triggered a
shutdown.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When XFS creates a new symlink, it writes its size to disk but not to the
VFS inode. This causes i_size_read() to return 0 for that symlink until
it is re-read from disk, for example when the system is rebooted.
I found this inconsistency while protecting directories with eCryptFS.
The command "stat path/to/symlink/in/ecryptfs" will report "Size: 0" if
the symlink was created after the last reboot on an XFS root.
Call i_size_write() in xfs_symlink()
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
xfs_buftarg_drain() is called from xfs_log_quiesce() to ensure the
buffer cache is reclaimed during unmount. xfs_log_quiesce() is also
called from xfs_quiesce_attr(), however, which means that cache
state is completely drained for filesystem freeze and read-only
remount. While technically harmless, this is unnecessarily
heavyweight. Both freeze and read-only mounts allow reads and thus
allow population of the buffer cache. Therefore, the transitional
sequence in either case really only needs to quiesce outstanding
writes to return the filesystem in a generally read-only state.
Additionally, some users have reported that attempts to freeze a
filesystem concurrent with a read-heavy workload causes the freeze
process to stall for a significant amount of time. This occurs
because, as mentioned above, the read workload repopulates the
buffer LRU while the freeze task attempts to drain it.
To improve this situation, replace the drain in xfs_log_quiesce()
with a buffer I/O quiesce and lift the drain into the unmount path.
This removes buffer LRU reclaim from freeze and read-only [re]mount,
but ensures the LRU is still drained before the filesystem unmounts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_wait_buftarg() is vaguely named and somewhat overloaded. Its
primary purpose is to reclaim all buffers from the provided buffer
target LRU. In preparation to refactor xfs_wait_buftarg() into
serialization and LRU draining components, rename the function and
associated helpers to something more descriptive. This patch has no
functional changes with the minor exception of renaming a
tracepoint.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
An assert failure is triggered by syzkaller test due to
ATTR_KILL_PRIV is not cleared before xfs_setattr_size.
As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size,
just remove it from the assert.
Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
XFS always inherits the SGID bit if it is set on the parent inode, while
the generic inode_init_owner does not do this in a few cases where it can
create a possible security problem, see commit 0fa3ecd87848
("Fix up non-directory creation in SGID directories") for details.
Switch XFS to use the generic helper for the normal path to fix this,
just keeping the simple field inheritance open coded for the case of the
non-sgid case with the bsdgrpid mount option.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The comment in xfs_file_aio_write_checks() about calling file_modified()
after dropping the ilock doesn't make sense, because the code that
unconditionally acquires and drops the ilock was removed by
commit 467f78992a07 ("xfs: reduce ilock hold times in
xfs_file_aio_write_checks").
Remove this outdated comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This commit adds XFS_ERRTAG_BMAP_ALLOC_MINLEN_EXTENT error tag which
helps userspace test programs to get xfs_bmap_btalloc() to always
allocate minlen sized extents.
This is required for test programs which need a guarantee that minlen
extents allocated for a file do not get merged with their existing
neighbours in the inode's BMBT. "Inode fork extent overflow check" for
Directories, Xattrs and extension of realtime inodes need this since the
file offset at which the extents are being allocated cannot be
explicitly controlled from userspace.
One way to use this error tag is to,
1. Consume all of the free space by sequentially writing to a file.
2. Punch alternate blocks of the file. This causes CNTBT to contain
sufficient number of one block sized extent records.
3. Inject XFS_ERRTAG_BMAP_ALLOC_MINLEN_EXTENT error tag.
After step 3, xfs_bmap_btalloc() will issue space allocation
requests for minlen sized extents only.
ENOSPC error code is returned to userspace when there aren't any "one
block sized" extents left in any of the AGs.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This commit moves over the code in xfs_bmap_btalloc() which is
responsible for processing an allocated extent to a new function. Apart
from xfs_bmap_btalloc(), the new function will be invoked by another
function introduced in a future commit.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This commit moves over the code which computes stripe alignment and
extent size hint alignment into a separate function. Apart from
xfs_bmap_btalloc(), the new function will be used by another function
introduced in a future commit.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The check for verifying if the allocated extent is from an AG whose
index is greater than or equal to that of tp->t_firstblock is already
done a couple of statements earlier in the same function. Hence this
commit removes the redundant assert statement.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This commit adds XFS_ERRTAG_REDUCE_MAX_IEXTENTS error tag which enables
userspace programs to test "Inode fork extent count overflow detection"
by reducing maximum possible inode fork extent count to 10.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
