summaryrefslogtreecommitdiffstats
path: root/fs/xfs
AgeCommit message (Collapse)AuthorFilesLines
2008-09-26[XFS] Remove xfs_iext_irec_compact_full()Lachlan McIlroy1-92/+3
Yet another bug was found in xfs_iext_irec_compact_full() and while the source of the bug was found it wasn't an easy task to track it down because the conditions are very difficult to reproduce. A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their significant effort in tracking down the source of this corruption. xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost identical - they both compact indirect extent lists by moving extents from subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only moves extents if all of the extents in the next buffer will fit into the empty space in the buffer before it. xfs_iext_irec_compact_full() will go a step further and move part of the next buffer if all the extents wont fit. It will then shift the remaining extents in the next buffer up to the start of the buffer. The bug here was that we did not update er_extoff and this caused extent list corruption. It does not appear that this extra functionality gains us much. Calling xfs_iext_irec_compact_pages() instead will do a good enough job at compacting the indirect list and will be quicker too. For the case in xfs_iext_indirect_to_direct() the total number of extents in the indirect list will fit into one buffer so we will never need the extra functionality of xfs_iext_irec_compact_full() there. Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the buffers will never overlap) so we don't want the performance hit that can incur. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32166a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
2008-09-26[XFS] Fix extent list corruption in xfs_iext_irec_compact_full().Lachlan McIlroy1-0/+1
If we don't move all the records from the next buffer into the current buffer then we need to update the er_extoff field of the next buffer as we shift the remaining records to the start of the buffer. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32165a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
2008-09-17[XFS] Don't do I/O beyond eof when unreserving spaceLachlan McIlroy1-0/+18
When unreserving space with boundaries that are not block aligned we round up the start and round down the end boundaries and then use this function, xfs_zero_remaining_bytes(), to zero the parts of the blocks that got dropped during the rounding. The problem is we don't consider if these blocks are beyond eof. Worse still is if we encounter delayed allocations beyond eof we will try to use the magic delayed allocation block number as a real block number. If the file size is ever extended to expose these blocks then we'll go through xfs_zero_eof() to zero them anyway. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:32055a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-09-17[XFS] Fix use-after-free with buffersLachlan McIlroy1-24/+20
We have a use-after-free issue where log completions access buffers via the buffer log item and the buffer has already been freed. Fix this by taking a reference on the buffer when attaching the buffer log item and release the hold when the buffer log item is detached and we no longer need the buffer. Also create a new function xfs_buf_item_free() to combine some common code. SGI-PV: 985757 SGI-Modid: xfs-linux-melb:xfs-kern:32025a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-09-17[XFS] Prevent lockdep false positives when locking two inodes.David Chinner2-1/+16
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock, then drop the ilocks on both inodes, then grab them again (as xfs_swap_extents() does) then lockdep will report a locking order problem. This is a false positive. To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks at once - force calers to make two separate calls. This means that nested dropping and regaining of the ilocks will retain the same lockdep subclass and so lockdep will not see anything wrong with this code. SGI-PV: 986238 SGI-Modid: xfs-linux-melb:xfs-kern:31999a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Peter Leckie <pleckie@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-09-17[XFS] Fix barrier status change detection.David Chinner1-1/+1
The current code in xlog_iodone() uses the wrong macro to check if the barrier has been cleared due to an EOPNOTSUPP error form the lower layer. SGI-PV: 986143 SGI-Modid: xfs-linux-melb:xfs-kern:31984a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net> Signed-off-by: Peter Leckie <pleckie@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-09-17[XFS] Prevent direct I/O from mapping extents beyond eofLachlan McIlroy1-0/+4
With the help from some tracing I found that we try to map extents beyond eof when doing a direct I/O read. It appears that the way to inform the generic direct I/O path (ie do_direct_IO()) that we have breached eof is to return an unmapped buffer from xfs_get_blocks_direct(). This will cause do_direct_IO() to jump to the hole handling code where is will check for eof and then abort. This problem was found because a direct I/O read was trying to map beyond eof and was encountering delayed allocations. The delayed allocations beyond eof are speculative allocations and they didn't get converted when the direct I/O flushed the file because there was only enough space in the current AG to convert and write out the dirty pages within eof. Note that xfs_iomap_write_allocate() wont necessarily convert all the delayed allocation passed to it - it will return after allocating the first extent - so if the delayed allocation extends beyond eof then it will stay that way. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:31929a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-09-17[XFS] Fix regression introduced by remount fixupChristoph Hellwig1-0/+20
Logically we would return an error in xfs_fs_remount code to prevent users from believing they might have changed mount options using remount which can't be changed. But unfortunately mount(8) adds all options from mtab and fstab to the mount arguments in some cases so we can't blindly reject options, but have to check for each specified option if it actually differs from the currently set option and only reject it if that's the case. Until that is implemented we return success for every remount request, and silently ignore all options that we can't actually change. SGI-PV: 985710 SGI-Modid: xfs-linux-melb:xfs-kern:31908a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-09-17[XFS] Move memory allocations for log tracing out of the critical pathLachlan McIlroy2-21/+40
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on demand when the first event is logged. In xlog_state_get_iclog_space() we call xlog_trace_iclog() under a spinlock and allocating memory here can cause us to sleep with a spinlock held and deadlock the system. For the log grant tracing we use KM_NOSLEEP but that means we can lose trace entries. Since there is no locking to serialize the log grant tracing we could race and have multiple allocations and leak memory. So move the allocations to where we initialize the log/iclog structures. Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace since it's not even used. SGI-PV: 983738 SGI-Modid: xfs-linux-melb:xfs-kern:31896a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-08-25[PATCH] fix ->llseek() for a bunch of directoriesAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-25[PATCH] change d_add_ci argument orderingChristoph Hellwig1-1/+1
As pointed out during review d_add_ci argument order should match d_add, so switch the dentry and inode arguments. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk1-1/+0
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-14CRED: Introduce credential access wrappersDavid Howells3-8/+6
The patches that are intended to introduce copy-on-write credentials for 2.6.28 require abstraction of access to some fields of the task structure, particularly for the case of one task accessing another's credentials where RCU will have to be observed. Introduced here are trivial no-op versions of the desired accessors for current and other tasks so that other subsystems can start to be converted over more easily. Wrappers are introduced into a new header (linux/cred.h) for UID/GID, EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed user_struct. These wrappers are macros because the ordering between header files mitigates against making them inline functions. linux/cred.h is #included from linux/sched.h. Further, XFS is modified such that it no longer defines and uses parameterised versions of current_fs[ug]id(), thus getting rid of the namespace collision otherwise incurred. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-13[XFS] Fix use after free in xfs_log_done().Lachlan McIlroy1-8/+5
The ticket allocation code got reworked in 2.6.26 and we now free tickets whereas before we used to cache them so the use-after-free went undetected. SGI-PV: 985525 SGI-Modid: xfs-linux-melb:xfs-kern:31877a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13[XFS] Make xfs_bmap_*_count_leaves void.Ruben Porras1-19/+7
xfs_bmap_count_leaves and xfs_bmap_disk_count_leaves always return always 0, make them void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31844a Signed-off-by: Ruben Porras <ruben.porras@linworks.de> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Use KM_NOFS for debug trace buffersLachlan McIlroy6-11/+11
Use KM_NOFS to prevent recursion back into the filesystem which can cause deadlocks. In the case of xfs_iread() we hold the lock on the inode cluster buffer while allocating memory for the trace buffers. If we recurse back into XFS to flush data that may require a transaction to allocate extents which needs log space. This can deadlock with the xfsaild thread which can't push the tail of the log because it is trying to get the inode cluster buffer lock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31838a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13[XFS] use KM_MAYFAIL in xfs_mountfsChristoph Hellwig1-2/+4
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error easily and blocking forever during mount is not a good idea either. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31837a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] refactor xfs_mount_freeChristoph Hellwig1-16/+5
xfs_mount_free mostly frees the perag data, which is something that is duplicated in the mount error path. Move the XFS_QM_DONE call to the caller and remove the useless mutex_destroy/spinlock_destroy calls so that we can re-use it for the mount error path. Also rename it to xfs_free_perag to reflect what it does. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31836a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] don't call xfs_freesb from xfs_unmountfsChristoph Hellwig2-3/+2
xfs_readsb is called before xfs_mount so xfs_freesb should be called after xfs_unmountfs, too. This means it now happens after a few things during the of xfs_unmount which all have nothing to do with the superblock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31835a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] xfs_unmountfs should return voidChristoph Hellwig2-8/+6
xfs_unmounts can't and shouldn't return errors so declare it as returning void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31833a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] cleanup xfs_mountfsChristoph Hellwig10-50/+27
Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] move root inode IRELE into xfs_unmountfsChristoph Hellwig2-4/+2
The root inode is allocated in xfs_mountfs so it should be release in xfs_unmountfs. For the unmount case that means we do it after the the xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the dmapi unmount event. Note that both reference the rip variable which might be freed by that time in case inode flushing has kicked in, so strictly speaking this might count as a bug fix SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31830a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] stop using file_update_timeChristoph Hellwig3-45/+1
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no need to call file_update_time and then copy the values over to the XFS inode. The only additional thing in file_update_time are checks not applicable to the write path. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31829a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13[XFS] optimize xfs_ichgtimeChristoph Hellwig1-6/+13
Port a little optmization from file_update_time to xfs_ichgtime, and only update the timestamp and mark the inode dirty if the timestamp actually changes in the timer tick resultion supported by the running kernel. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31827a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] update timestamp in xfs_ialloc manuallyChristoph Hellwig4-21/+9
In xfs_ialloc we just want to set all timestamps to the current time. We don't need to mark the inode dirty like xfs_ichgtime does, and we don't need nor want the opimizations in xfs_ichgtime that I will introduce in the next patch. So just opencode the timestamp update in xfs_ialloc, and remove the new unused XFS_ICHGTIME_ACC case in xfs_ichgtime. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31825a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove the sema_t from XFS.David Chinner2-53/+1
Now that all users of the sema_t are gone from XFS we can finally kill it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31823a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] replace dquot flush semaphore with a completionDavid Chinner4-41/+38
Use the new completion flush code to implement the dquot flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31822a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] replace inode flush semaphore with a completionDavid Chinner4-40/+39
Use the new completion flush code to implement the inode flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31817a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] replace the XFS buf iodone semaphore with a completionDavid Chinner4-7/+7
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a completion. Change it to a completion and remove the last user of the sema_t from XFS. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31815a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] clean up stale references to semaphoresDavid Chinner3-42/+39
A lot of code has been converted away from semaphores, but there are still comments that reference semaphore behaviour. The log code is the worst offender. Update the comments to reflect what the code really does now. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31814a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] use get_unaligned_* helpersHarvey Harrison1-2/+2
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31813a Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Fix compile failure in xfs_buf_trace()Lachlan McIlroy1-1/+1
SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:31804a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Use the same btree_cur union member for alloc and inobt trees.Christoph Hellwig3-30/+26
The alloc and inobt btree use the same agbp/agno pair in the btree_cur union. Make them use the same bc_private.a union member so that code for these two short form btree implementations can be shared. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31788a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] small cleanups in xfs_btree.cChristoph Hellwig1-57/+30
Remove unneeded xfs_btree_get_block forward declaration. Move xfs_btree_firstrec next to xfs_btree_lastrec. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31787a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] sanitize xfs_initialize_vnodeChristoph Hellwig6-126/+111
Sanitize setting up the Linux indode. Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now because that's the only place it needs to be done, xfs_initialize_vnode is renamed to xfs_setup_inode and loses all superflous paramaters. The check for I_NEW is removed because it always is true and the di_mode check moves into xfs_iget_core because it's only needed there. xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode and the whole things is moved into xfs_iops.c where it belongs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31782a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill bhv_vnode_tChristoph Hellwig11-38/+36
All remaining bhv_vnode_t instance are in code that's more or less Linux specific. (Well, for xfs_acl.c that could be argued, but that code is on the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the whole tree. We can clean up variable naming and some useless helpers later. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31781a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove some easy bhv_vnode_t instancesChristoph Hellwig6-37/+17
In various places we can just move a VFS_I call into the argument list of called functions/macros instead of having a local bhv_vnode_t. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31776a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill xfs_lock_dir_and_entryChristoph Hellwig3-133/+44
When multiple inodes are locked in XFS it happens in order of the inode number, with the everything but the first inode trylocked if any of the previous inodes is in the AIL. Except for the sorting of the inodes this logic is implemented in xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry in a particularly stupid way adds a lock roundtrip if the inode ordering is not optimal. This patch adds a new helper xfs_lock_two_inodes that takes two inodes and locks them in the most optimal way according to the above locking protocol and uses it for all places that want to lock two inodes. The only caller of xfs_lock_inodes is xfs_rename which might lock up to four inodes. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31772a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill INDUCE_IO_ERRORChristoph Hellwig3-15/+4
All the error injection is already enabled through ifdef DEBUG, so kill the never set second cpp symbol to activate it without the rest of the debugging infrastructure. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31771a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] implement IHOLD/IRELE directlyChristoph Hellwig3-37/+12
Now that all direct calls to VN_HOLD/VN_RELE are gone we can implement IHOLD/IRELE directly. For the IHOLD case also replace igrab with a direct increment of i_count because we are guaranteed to already have a live and referenced inode by the VFS. Also remove the vn_hold statistic because it's been rather meaningless for some time with most references done by other callers. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31764a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove remaining VN_HOLD callsChristoph Hellwig3-9/+5
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31765a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove spurious VN_HOLD/VN_RELE calls from xfs_acl.cChristoph Hellwig1-6/+0
All the ACL routines are called from inode operations which are guaranteed to have a referenced inode by the VFS, so there's no need for the ACL code to grab another temporary one. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31763a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill vn_to_inodeChristoph Hellwig5-28/+18
bhv_vnode_t is just a typedef for struct inode, so there's no need for a helper to convert between the two. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31761a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Remove vn_from_inode()Christoph Hellwig2-7/+2
bhv_vnode_t is just a typedef for struct inode, so there's no need for a helper to convert between the two. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31760a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove shouting-indirection macros from xfs_trans.hEric Sandeen5-59/+48
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31758a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] convert xfs to use ERR_CASTEric Sandeen1-2/+2
Looks like somehow xfs got missed in the conversion that took place in e231c2ee64eb1c5cd3c63c31da9dac7d888dcf7f, "Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) <http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit diff;h=e231c2ee64eb1c5cd3c63c31da9dac7d888dcf7f>" SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31757a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove INT_GET and friendsEric Sandeen1-68/+0
Thanks to hch's endian work, INT_GET etc are no longer used, and may as well be removed. INT_SET is still used in the acl code, though. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31756a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Move xfs_attr_rolltrans to xfs_trans_rollNiv Sardi5-79/+92
Move it from the attr code to the transaction code and make the attr code call the new function. We rolltrans is really usefull whenever we want to use rolling transaction, should be generic, it isn't dependent on any part of the attr code anyway. We use this excuse to change all the: if ((error = xfs_attr_rolltrans())) calls into: error = xfs_trans_roll(); if (error) SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31729a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] don't leak m_fsname/m_rtname/m_lognameChristoph Hellwig2-17/+41
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use it properly for all mount failure cases. Also switch the allocations for these to kstrdup while we're at it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31728a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Move attr log alloc size calculator to another function.Niv Sardi2-32/+49
We will need that to be able to calculate the size of log we need for a specific attr (for Create+EA). The local flag is needed so that we can fail if we run into ENOSPC when trying to alloc blocks. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31727a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 20:44:19 +0000