summaryrefslogtreecommitdiffstats
path: root/fs/xfs
AgeCommit message (Collapse)AuthorFilesLines
2017-09-14Merge branch 'work.read_write' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull nowait read support from Al Viro: "Support IOCB_NOWAIT for buffered reads and block devices" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: block_dev: support RFW_NOWAIT on block device nodes fs: support RWF_NOWAIT for buffered reads fs: support IOCB_NOWAIT in generic_file_buffered_read fs: pass iocb to do_generic_file_read
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-12xfs: XFS_IS_REALTIME_INODE() should be false if no rt device presentRichard Wareing1-1/+8
If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da8d52 ("[XFS] write barrier support") Cc: <stable@vger.kernel.org> Signed-off-by: Richard Wareing <rwareing@fb.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-11Merge tag 'libnvdimm-for-4.14' of ↵Linus Torvalds6-15/+41
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm from Dan Williams: "A rework of media error handling in the BTT driver and other updates. It has appeared in a few -next releases and collected some late- breaking build-error and warning fixups as a result. Summary: - Media error handling support in the Block Translation Table (BTT) driver is reworked to address sleeping-while-atomic locking and memory-allocation-context conflicts. - The dax_device lookup overhead for xfs and ext4 is moved out of the iomap hot-path to a mount-time lookup. - A new 'ecc_unit_size' sysfs attribute is added to advertise the read-modify-write boundary property of a persistent memory range. - Preparatory fix-ups for arm and powerpc pmem support are included along with other miscellaneous fixes" * tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits) libnvdimm, btt: fix format string warnings libnvdimm, btt: clean up warning and error messages ext4: fix null pointer dereference on sbi libnvdimm, nfit: move the check on nd_reserved2 to the endpoint dax: fix FS_DAX=n BLOCK=y compilation libnvdimm: fix integer overflow static analysis warning libnvdimm, nd_blk: remove mmio_flush_range() libnvdimm, btt: rework error clearing libnvdimm: fix potential deadlock while clearing errors libnvdimm, btt: cache sector_size in arena_info libnvdimm, btt: ensure that flags were also unchanged during a map_read libnvdimm, btt: refactor map entry operations with macros libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute ext4: perform dax_device lookup at mount ext2: perform dax_device lookup at mount xfs: perform dax_device lookup at mount dax: introduce a fs_dax_get_by_bdev() helper libnvdimm, btt: check memory allocation failure libnvdimm, label: fix index block size calculation ...
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+2
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge updates from Andrew Morton: - various misc bits - DAX updates - OCFS2 - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits) mm,fork: introduce MADV_WIPEONFORK x86,mpx: make mpx depend on x86-64 to free up VMA flag mm: add /proc/pid/smaps_rollup mm: hugetlb: clear target sub-page last when clearing huge page mm: oom: let oom_reap_task and exit_mmap run concurrently swap: choose swap device according to numa node mm: replace TIF_MEMDIE checks by tsk_is_oom_victim mm, oom: do not rely on TIF_MEMDIE for memory reserves access z3fold: use per-cpu unbuddied lists mm, swap: don't use VMA based swap readahead if HDD is used as swap mm, swap: add sysfs interface for VMA based swap readahead mm, swap: VMA based swap readahead mm, swap: fix swap readahead marking mm, swap: add swap readahead hit statistics mm/vmalloc.c: don't reinvent the wheel but use existing llist API mm/vmstat.c: fix wrong comment selftests/memfd: add memfd_create hugetlbfs selftest mm/shmem: add hugetlbfs support to memfd_create() mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas() ...
2017-09-06dax: use common 4k zero page for dax mmap readsRoss Zwisler1-1/+1
When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04fs: support RWF_NOWAIT for buffered readsChristoph Hellwig1-2/+9
This is based on the old idea and code from Milosz Tanski. With the aio nowait code it becomes mostly trivial now. Buffered writes continue to return -EOPNOTSUPP if RWF_NOWAIT is passed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03xfs: use kmem_free to free return value of kmem_zallocPan Bian1-1/+1
In function xfs_test_remount_options(), kfree() is used to free memory allocated by kmem_zalloc(). But it is better to use kmem_free(). Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-03xfs: open code end_buffer_async_write in xfs_finish_page_writebackChristoph Hellwig1-24/+47
Our loop in xfs_finish_page_writeback, which iterates over all buffer heads in a page and then calls end_buffer_async_write, which also iterates over all buffers in the page to check if any I/O is in flight is not only inefficient, but also potentially dangerous as end_buffer_async_write can cause the page and all buffers to be freed. Replace it with a single loop that does the work of end_buffer_async_write on a per-page basis. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-02xfs: don't set v3 xflags for v2 inodesChristoph Hellwig1-13/+25
Reject attempts to set XFLAGS that correspond to di_flags2 inode flags if the inode isn't a v3 inode, because di_flags2 only exists on v3. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-02xfs: fix compiler warningsDarrick J. Wong5-8/+11
Fix up all the compiler warnings that have crept in. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-09-01xfs: simplify the rmap code in xfs_bmse_mergeDarrick J. Wong1-4/+3
In Christoph's patch to refactor xfs_bmse_merge, the updated rmap code does more work than it needs to (because map-extent auto-merges records). Remove the unnecessary unmap and save ourselves a deferred op. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-09-01xfs: remove unused flags arg from xfs_file_iomap_begin_delayEric Sandeen1-3/+1
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: fix incorrect log_flushed on fsyncAmir Goldstein1-7/+0
When calling into _xfs_log_force{,_lsn}() with a pointer to log_flushed variable, log_flushed will be set to 1 if: 1. xlog_sync() is called to flush the active log buffer AND/OR 2. xlog_wait() is called to wait on a syncing log buffers xfs_file_fsync() checks the value of log_flushed after _xfs_log_force_lsn() call to optimize away an explicit PREFLUSH request to the data block device after writing out all the file's pages to disk. This optimization is incorrect in the following sequence of events: Task A Task B ------------------------------------------------------- xfs_file_fsync() _xfs_log_force_lsn() xlog_sync() [submit PREFLUSH] xfs_file_fsync() file_write_and_wait_range() [submit WRITE X] [endio WRITE X] _xfs_log_force_lsn() xlog_wait() [endio PREFLUSH] The write X is not guarantied to be on persistent storage when PREFLUSH request in completed, because write A was submitted after the PREFLUSH request, but xfs_file_fsync() of task A will be notified of log_flushed=1 and will skip explicit flush. If the system crashes after fsync of task A, write X may not be present on disk after reboot. This bug was discovered and demonstrated using Josef Bacik's dm-log-writes target, which can be used to record block io operations and then replay a subset of these operations onto the target device. The test goes something like this: - Use fsx to execute ops of a file and record ops on log device - Every now and then fsync the file, store md5 of file and mark the location in the log - Then replay log onto device for each mark, mount fs and compare md5 of file to stored value Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: disable per-inode DAX flagChristoph Hellwig1-1/+2
Currently flag switching can be used to easily crash the kernel. Disable the per-inode DAX flag until that is sorted out. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: replace xfs_qm_get_rtblks with a direct call to xfs_bmap_count_leavesChristoph Hellwig1-32/+12
Use the existing functionality instead of directly poking into the extent list. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: rewrite xfs_bmap_count_leaves using xfs_iext_get_extentChristoph Hellwig2-11/+11
This avoids poking into the internals of the extent list. Also return the number of extents as the return value instead of an additional by reference argument, and make it available to callers outside of xfs_bmap_util.c Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: use xfs_iext_*_extent helpers in xfs_bmap_split_extent_atChristoph Hellwig1-16/+4
This abstracts the function away from details of the low-level extent list implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: use xfs_iext_*_extent helpers in xfs_bmap_shift_extentsChristoph Hellwig1-92/+88
This abstracts the function away from details of the low-level extent list implementation. Note that it seems like the previous implementation of rmap for the merge case was completely broken, but it no seems appear to trigger that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: move some code around inside xfs_bmap_shift_extentsChristoph Hellwig1-25/+29
For the first right move we need to look up next_fsb. That means our last fsb that contains next_fsb must also be the current extent, so take advantage of that by moving the code around a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: use xfs_iext_get_extent in xfs_bmap_first_unusedChristoph Hellwig1-5/+7
Use the bmap abstraction instead of open-coding bmbt details here. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: switch xfs_bmap_local_to_extents to use xfs_iext_insertChristoph Hellwig1-4/+7
Use the helper instead of open coding it, to provide a better abstraction for the scalable extent list work. This also gets an additional assert and trace point for free. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: add a xfs_iext_update_extent helperChristoph Hellwig3-6/+20
This helper is used to update an extent record based on the extent index, and can be used to provide a level of abstractions between callers that want to modify in-core extent records and the details of the extent list implementation. Also switch all users of the xfs_bmbt_set_all(xfs_iext_get_ext(...)) pattern to this new helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: consolidate the various page fault handlersChristoph Hellwig2-65/+60
Add a new __xfs_filemap_fault helper that implements all four page fault callouts, and make these methods themselves small stubs that set the correct write_fault flag, and exit early for the non-DAX case for the hugepage related ones. Also remove the extra size checking in the pfn_fault path, which is now handled in the core DAX code. Life would be so much simpler if we only had one method for all this. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01iomap: return VM_FAULT_* codes from iomap_page_mkwriteChristoph Hellwig1-1/+0
All callers will need the VM_FAULT_* flags, so convert in the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: relog dirty buffers during swapext bmbt owner changeBrian Foster2-18/+65
The owner change bmbt scan that occurs during extent swap operations does not handle ordered buffer failures. Buffers that cannot be marked ordered must be physically logged so previously dirty ranges of the buffer can be relogged in the transaction. Since the bmbt scan may need to process and potentially log a large number of blocks, we can't expect to complete this operation in a single transaction. Update extent swap to use a permanent transaction with enough log reservation to physically log a buffer. Update the bmbt scan to physically log any buffers that cannot be ordered and to terminate the scan with -EAGAIN. On -EAGAIN, the caller rolls the transaction and restarts the scan. Finally, update the bmbt scan helper function to skip bmbt blocks that already match the expected owner so they are not reprocessed after scan restarts. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [darrick: fix the xfs_trans_roll call] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: disallow marking previously dirty buffers as orderedBrian Foster2-3/+6
Ordered buffers are used in situations where the buffer is not physically logged but must pass through the transaction/logging pipeline for a particular transaction. As a result, ordered buffers are not unpinned and written back until the transaction commits to the log. Ordered buffers have a strict requirement that the target buffer must not be currently dirty and resident in the log pipeline at the time it is marked ordered. If a dirty+ordered buffer is committed, the buffer is reinserted to the AIL but not physically relogged at the LSN of the associated checkpoint. The buffer log item is assigned the LSN of the latest checkpoint and the AIL effectively releases the previously logged buffer content from the active log before the buffer has been written back. If the tail pushes forward and a filesystem crash occurs while in this state, an inconsistent filesystem could result. It is currently the caller responsibility to ensure an ordered buffer is not already dirty from a previous modification. This is unclear and error prone when not used in situations where it is guaranteed a buffer has not been previously modified (such as new metadata allocations). To facilitate general purpose use of ordered buffers, update xfs_trans_ordered_buf() to conditionally order the buffer based on state of the log item and return the status of the result. If the bli is dirty, do not order the buffer and return false. The caller must either physically log the buffer (having acquired the appropriate log reservation) or push it from the AIL to clean it before it can be marked ordered in the current transaction. Note that ordered buffers are currently only used in two situations: 1.) inode chunk allocation where previously logged buffers are not possible and 2.) extent swap which will be updated to handle ordered buffer failures in a separate patch. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: move bmbt owner change to last step of extent swapBrian Foster1-18/+26
The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: skip bmbt block ino validation during owner changeBrian Foster3-1/+4
Extent swap uses xfs_btree_visit_blocks() to fix up bmbt block owners on v5 (!rmapbt) filesystems. The bmbt scan uses xfs_btree_lookup_get_block() to read bmbt blocks which verifies the current owner of the block against the parent inode of the bmbt. This works during extent swap because the bmbt owners are updated to the opposite inode number before the inode extent forks are swapped. The modified bmbt blocks are marked as ordered buffers which allows everything to commit in a single transaction. If the transaction commits to the log and the system crashes such that recovery of the extent swap is required, log recovery restarts the bmbt scan to fix up any bmbt blocks that may have not been written back before the crash. The log recovery bmbt scan occurs after the inode forks have been swapped, however. This causes the bmbt block owner verification to fail, leads to log recovery failure and requires xfs_repair to zap the log to recover. Define a new invalid inode owner flag to inform the btree block lookup mechanism that the current inode may be invalid with respect to the current owner of the bmbt block. Set this flag on the cursor used for change owner scans to allow this operation to work at runtime and during log recovery. Signed-off-by: Brian Foster <bfoster@redhat.com> Fixes: bb3be7e7c ("xfs: check for bogus values in btree block headers") Cc: stable@vger.kernel.org Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: don't log dirty ranges for ordered buffersBrian Foster3-18/+16
Ordered buffers are attached to transactions and pushed through the logging infrastructure just like normal buffers with the exception that they are not actually written to the log. Therefore, we don't need to log dirty ranges of ordered buffers. xfs_trans_log_buf() is called on ordered buffers to set up all of the dirty state on the transaction, buffer and log item and prepare the buffer for I/O. Now that xfs_trans_dirty_buf() is available, call it from xfs_trans_ordered_buf() so the latter is now mutually exclusive with xfs_trans_log_buf(). This reflects the implementation of ordered buffers and helps eliminate confusion over the need to log ranges of ordered buffers just to set up internal log state. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: refactor buffer logging into buffer dirtying helperBrian Foster2-17/+33
xfs_trans_log_buf() is responsible for logging the dirty segments of a buffer along with setting all of the necessary state on the transaction, buffer, bli, etc., to ensure that the associated items are marked as dirty and prepared for I/O. We have a couple use cases that need to to dirty a buffer in a transaction without actually logging dirty ranges of the buffer. One existing use case is ordered buffers, which are currently logged with arbitrary ranges to accomplish this even though the content of ordered buffers is never written to the log. Another pending use case is to relog an already dirty buffer across rolled transactions within the deferred operations infrastructure. This is required to prevent a held (XFS_BLI_HOLD) buffer from pinning the tail of the log. Refactor xfs_trans_log_buf() into a new function that contains all of the logic responsible to dirty the transaction, lidp, buffer and bli. This new function can be used in the future for the use cases outlined above. This patch does not introduce functional changes. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: ordered buffer log items are never formattedBrian Foster2-11/+2
Ordered buffers pass through the logging infrastructure without ever being written to the log. The way this works is that the ordered buffer status is transferred to the log vector at commit time via the ->iop_size() callback. In xlog_cil_insert_format_items(), ordered log vectors bypass ->iop_format() processing altogether. Therefore it is unnecessary for xfs_buf_item_format() to handle ordered buffers. Remove the unnecessary logic and assert that an ordered buffer never reaches this point. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: remove unnecessary dirty bli format check for ordered bufsBrian Foster2-30/+33
xfs_buf_item_unlock() historically checked the dirty state of the buffer by manually checking the buffer log formats for dirty segments. The introduction of ordered buffers invalidated this check because ordered buffers have dirty bli's but no dirty (logged) segments. The check was updated to accommodate ordered buffers by looking at the bli state first and considering the blf only if the bli is clean. This logic is safe but unnecessary. There is no valid case where the bli is clean yet the blf has dirty segments. The bli is set dirty whenever the blf is logged (via xfs_trans_log_buf()) and the blf is cleared in the only place BLI_DIRTY is cleared (xfs_trans_binval()). Remove the conditional blf dirty checks and replace with an assert that should catch any discrepencies between bli and blf dirty states. Refactor the old blf dirty check into a helper function to be used by the assert. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: open-code xfs_buf_item_dirty()Brian Foster3-13/+1
It checks a single flag and has one caller. It probably isn't worth its own function. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: remove the ip argument to xfs_defer_finishChristoph Hellwig15-116/+129
And instead require callers to explicitly join the inode using xfs_defer_ijoin. Also consolidate the defer error handling in a few places using a goto label. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: rename xfs_defer_join to xfs_defer_ijoinChristoph Hellwig3-4/+4
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: refactor xfs_trans_rollChristoph Hellwig9-56/+48
Split xfs_trans_roll into a low-level helper that just rolls the actual transaction and a new higher level xfs_trans_roll_inode that takes care of logging and rejoining the inode. This gets rid of the NULL inode case, and allows to simplify the special cases in the deferred operation code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: check for race with xfs_reclaim_inode() in xfs_ifree_cluster()Omar Sandoval2-10/+23
After xfs_ifree_cluster() finds an inode in the radix tree and verifies that the inode number is what it expected, xfs_reclaim_inode() can swoop in and free it. xfs_ifree_cluster() will then happily continue working on the freed inode. Most importantly, it will mark the inode stale, which will probably be overwritten when the inode slab object is reallocated, but if it has already been reallocated then we can end up with an inode spuriously marked stale. In 8a17d7ddedb4 ("xfs: mark reclaimed inodes invalid earlier") we added a second check to xfs_iflush_cluster() to detect this race, but the similar RCU lookup in xfs_ifree_cluster() needs the same treatment. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: evict all inodes involved with log redo itemDarrick J. Wong1-0/+12
When we introduced the bmap redo log items, we set MS_ACTIVE on the mountpoint and XFS_IRECOVERY on the inode to prevent unlinked inodes from being truncated prematurely during log recovery. This also had the effect of putting linked inodes on the lru instead of evicting them. Unfortunately, we neglected to find all those unreferenced lru inodes and evict them after finishing log recovery, which means that we leak them if anything goes wrong in the rest of xfs_mountfs, because the lru is only cleaned out on unmount. Therefore, evict unreferenced inodes in the lru list immediately after clearing MS_ACTIVE. Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: viro@ZenIV.linux.org.uk Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-08-31xfs: perform dax_device lookup at mountDan Williams6-15/+41
The ->iomap_begin() operation is a hot path, so cache the fs_dax_get_by_host() result at mount time to avoid the incurring the hash lookup overhead on a per-i/o basis. Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig2-2/+2
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-22xfs: stop searching for free slots in an inode chunk when there are noneCarlos Maiolino1-28/+27
In a filesystem without finobt, the Space manager selects an AG to alloc a new inode, where xfs_dialloc_ag_inobt() will search the AG for the free slot chunk. When the new inode is in the same AG as its parent, the btree will be searched starting on the parent's record, and then retried from the top if no slot is available beyond the parent's record. To exit this loop though, xfs_dialloc_ag_inobt() relies on the fact that the btree must have a free slot available, once its callers relied on the agi->freecount when deciding how/where to allocate this new inode. In the case when the agi->freecount is corrupted, showing available inodes in an AG, when in fact there is none, this becomes an infinite loop. Add a way to stop the loop when a free slot is not found in the btree, making the function to fall into the whole AG scan which will then, be able to detect the corruption and shut the filesystem down. As pointed by Brian, this might impact performance, giving the fact we don't reset the search distance anymore when we reach the end of the tree, giving it fewer tries before falling back to the whole AG search, but it will only affect searches that start within 10 records to the end of the tree. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: add log recovery tracepoint for head/tailBrian Foster2-0/+20
Torn write detection and tail overwrite detection can shift the log head and tail respectively in the event of CRC mismatch or corruption errors. Add a high-level log recovery tracepoint to dump the final log head/tail and make those values easily attainable in debug/diagnostic situations. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: handle -EFSCORRUPTED during head/tail verificationBrian Foster1-4/+3
Torn write and tail overwrite detection both trigger only on -EFSBADCRC errors. While this is the most likely failure scenario for each condition, -EFSCORRUPTED is still possible in certain cases depending on what ends up on disk when a torn write or partial tail overwrite occurs. For example, an invalid log record h_len can lead to an -EFSCORRUPTED error when running the log recovery CRC pass. Therefore, update log head and tail verification to trigger the associated head/tail fixups in the event of -EFSCORRUPTED errors along with -EFSBADCRC. Also, -EFSCORRUPTED can currently be returned from xlog_do_recovery_pass() before rhead_blk is initialized if the first record encountered happens to be corrupted. This leads to an incorrect 'first_bad' return value. Initialize rhead_blk earlier in the function to address that problem as well. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: add log item pinning error injection tagBrian Foster3-2/+22
Add an error injection tag to force log items in the AIL to the pinned state. This option can be used by test infrastructure to induce head behind tail conditions. Specifically, this is intended to be used by xfstests to reproduce log recovery problems after failed/corrupted log writes overwrite the last good tail LSN in the log. When enabled, AIL push attempts see log items in the AIL in the pinned state. This stalls metadata writeback and thus prevents the current tail of the log from moving forward. When disabled, subsequent AIL pushes observe the log items in their appropriate state and filesystem operation continues as normal. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: fix log recovery corruption error due to tail overwriteBrian Foster1-31/+77
If we consider the case where the tail (T) of the log is pinned long enough for the head (H) to push and block behind the tail, we can end up blocked in the following state without enough free space (f) in the log to satisfy a transaction reservation: 0 phys. log N [-------HffT---H'--T'---] The last good record in the log (before H) refers to T. The tail eventually pushes forward (T') leaving more free space in the log for writes to H. At this point, suppose space frees up in the log for the maximum of 8 in-core log buffers to start flushing out to the log. If this pushes the head from H to H', these next writes overwrite the previous tail T. This is safe because the items logged from T to T' have been written back and removed from the AIL. If the next log writes (H -> H') happen to fail and result in partial records in the log, the filesystem shuts down having overwritten T with invalid data. Log recovery correctly locates H on the subsequent mount, but H still refers to the now corrupted tail T. This results in log corruption errors and recovery failure. Since the tail overwrite results from otherwise correct runtime behavior, it is up to log recovery to try and deal with this situation. Update log recovery tail verification to run a CRC pass from the first record past the tail to the head. This facilitates error detection at T and moves the recovery tail to the first good record past H' (similar to truncating the head on torn write detection). If corruption is detected beyond the range possibly affected by the max number of iclogs, the log is legitimately corrupted and log recovery failure is expected. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: always verify the log tail during recoveryBrian Foster1-23/+3
Log tail verification currently only occurs when torn writes are detected at the head of the log. This was introduced because a change in the head block due to torn writes can lead to a change in the tail block (each log record header references the current tail) and the tail block should be verified before log recovery proceeds. Tail corruption is possible outside of torn write scenarios, however. For example, partial log writes can be detected and cleared during the initial head/tail block discovery process. If the partial write coincides with a tail overwrite, the log tail is corrupted and recovery fails. To facilitate correct handling of log tail overwites, update log recovery to always perform tail verification. This is necessary to detect potential tail overwrite conditions when torn writes may not have occurred. This changes normal (i.e., no torn writes) recovery behavior slightly to detect and return CRC related errors near the tail before actual recovery starts. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: fix recovery failure when log record header wraps log endBrian Foster1-4/+14
The high-level log recovery algorithm consists of two loops that walk the physical log and process log records from the tail to the head. The first loop handles the case where the tail is beyond the head and processes records up to the end of the physical log. The subsequent loop processes records from the beginning of the physical log to the head. Because log records can wrap around the end of the physical log, the first loop mentioned above must handle this case appropriately. Records are processed from in-core buffers, which means that this algorithm must split the reads of such records into two partial I/Os: 1.) from the beginning of the record to the end of the log and 2.) from the beginning of the log to the end of the record. This is further complicated by the fact that the log record header and log record data are read into independent buffers. The current handling of each buffer correctly splits the reads when either the header or data starts before the end of the log and wraps around the end. The data read does not correctly handle the case where the prior header read wrapped or ends on the physical log end boundary. blk_no is incremented to or beyond the log end after the header read to point to the record data, but the split data read logic triggers, attempts to read from an invalid log block and ultimately causes log recovery to fail. This can be reproduced fairly reliably via xfstests tests generic/047 and generic/388 with large iclog sizes (256k) and small (10M) logs. If the record header read has pushed beyond the end of the physical log, the subsequent data read is actually contiguous. Update the data read logic to detect the case where blk_no has wrapped, mod it against the log size to read from the correct address and issue one contiguous read for the log data buffer. The log record is processed as normal from the buffer(s), the loop exits after the current iteration and the subsequent loop picks up with the first new record after the start of the log. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-22xfs: Properly retry failed inode items in case of error during buffer writebackCarlos Maiolino6-5/+108
When a buffer has been failed during writeback, the inode items into it are kept flush locked, and are never resubmitted due the flush lock, so, if any buffer fails to be written, the items in AIL are never written to disk and never unlocked. This causes unmount operation to hang due these items flush locked in AIL, but this also causes the items in AIL to never be written back, even when the IO device comes back to normal. I've been testing this patch with a DM-thin device, creating a filesystem larger than the real device. When writing enough data to fill the DM-thin device, XFS receives ENOSPC errors from the device, and keep spinning on xfsaild (when 'retry forever' configuration is set). At this point, the filesystem can not be unmounted because of the flush locked items in AIL, but worse, the items in AIL are never retried at all (once xfs_inode_item_push() will skip the items that are flush locked), even if the underlying DM-thin device is expanded to the proper size. This patch fixes both cases, retrying any item that has been failed previously, using the infra-structure provided by the previous patch. Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 18:09:28 +0000