summaryrefslogtreecommitdiffstats
path: root/fs/xfs
AgeCommit message (Collapse)AuthorFilesLines
2012-01-17xfs: cleanup xfs_file_aio_writeChristoph Hellwig1-45/+37
With all the size field updates out of the way xfs_file_aio_write can be further simplified by pushing all iolock handling into xfs_file_dio_aio_write and xfs_file_buffered_aio_write and using the generic generic_write_sync helper for synchronous writes. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: always return with the iolock held from xfs_file_aio_write_checksChristoph Hellwig1-3/+4
While xfs_iunlock is fine with 0 lockflags the calling conventions are much cleaner if xfs_file_aio_write_checks never returns without the iolock held. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: remove the i_new_size field in struct xfs_inodeChristoph Hellwig5-92/+30
Now that we use the VFS i_size field throughout XFS there is no need for the i_new_size field any more given that the VFS i_size field gets updated in ->write_end before unlocking the page, and thus is always uptodate when writeback could see a page. Removing i_new_size also has the advantage that we will never have to trim back di_size during a failed buffered write, given that it never gets updated past i_size. Note that currently the generic direct I/O code only updates i_size after calling our end_io handler, which requires a small workaround to make sure di_size actually makes it to disk. I hope to fix this properly in the generic code. A downside is that we lose the support for parallel non-overlapping O_DIRECT appending writes that recently was added. I don't think keeping the complex and fragile i_new_size infrastructure for this is a good tradeoff - if we really care about parallel appending writers we should investigate turning the iolock into a range lock, which would also allow for parallel non-overlapping buffered writers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: remove the i_size field in struct xfs_inodeChristoph Hellwig12-82/+56
There is no fundamental need to keep an in-memory inode size copy in the XFS inode. We already have the on-disk value in the dinode, and the separate in-memory copy that we need for regular files only in the XFS inode. Remove the xfs_inode i_size field and change the XFS_ISIZE macro to use the VFS inode i_size field for regular files. Switch code that was directly accessing the i_size field in the xfs_inode to XFS_ISIZE, or in cases where we are limited to regular files direct access of the VFS inode i_size field. This also allows dropping some fairly complicated code in the write path which dealt with keeping the xfs_inode i_size uptodate with the VFS i_size that is getting updated inside ->write_end. Note that we do not bother resetting the VFS i_size when truncating a file that gets freed to zero as there is no point in doing so because the VFS inode is no longer in use at this point. Just relax the assert in xfs_ifree to only check the on-disk size instead. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: replace i_pin_wait with a bit waitqueueChristoph Hellwig4-9/+24
Replace i_pin_wait, which is only used during synchronous inode flushing with a bit waitqueue. This trades off a much smaller inode against slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit) bytes in the XFS inode. Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: replace i_flock with a sleeping bitlockChristoph Hellwig6-46/+76
We almost never block on i_flock, the exception is synchronous inode flushing. Instead of bloating the inode with a 16/24-byte completion that we abuse as a semaphore just implement it as a bitlock that uses a bit waitqueue for the rare sleeping path. This primarily is a tradeoff between a much smaller inode and a faster non-blocking path vs faster wakeups, and we are much better off with the former. A small downside is that we will lose lockdep checking for i_flock, but given that it's always taken inside the ilock that should be acceptable. Note that for example the inode writeback locking is implemented in a very similar way. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: make i_flags an unsigned longChristoph Hellwig1-1/+1
To be used for bit wakeup i_flags needs to be an unsigned long or we'll run into trouble on big endian systems. Because of the 1-byte i_update field right after it this actually causes a fairly large size increase on its own (4 or 8 bytes), but that increase will be more than offset by the next two patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17xfs: remove the if_ext_max field in struct xfs_iforkChristoph Hellwig8-115/+81
We spent a lot of effort to maintain this field, but it always equals to the fork size divided by the constant size of an extent. The prime use of it is to assert that the two stay in sync. Just divide the fork size by the extent size in the few places that we actually use it and remove the overhead of maintaining it. Also introduce a few helpers to consolidate the places where we actually care about the value. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13xfs: remove the unused dm_attrs structureChristoph Hellwig1-7/+0
.. and the just as dead bhv_desc forward declaration while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13xfs: cleanup xfs_iomap_eof_align_last_fsbChristoph Hellwig1-18/+18
Replace the nasty if, else if, elseif condition with more natural C flow that expressed the logic we want here better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13xfs: remove xfs_itruncate_dataChristoph Hellwig7-142/+65
This wrapper isn't overly useful, not to say rather confusing. Around the call to xfs_itruncate_extents it does: - add tracing - add a few asserts in debug builds - conditionally update the inode size in two places - log the inode Both the tracing and the inode logging can be moved to xfs_itruncate_extents as they are useful for the attribute fork as well - in fact the attr code already does an equivalent xfs_trans_log_inode call just after calling xfs_itruncate_extents. The conditional size updates are a mess, and there was no reason to do them in two places anyway, as the first one was conditional on the inode having extents - but without extents we xfs_itruncate_extents would be a no-op and the placement wouldn't matter anyway. Instead move the size assignments and the asserts that make sense to the callers that want it. As a side effect of this clean up xfs_setattr_size by introducing variables for the old and new inode size, and moving the size updates into a common place. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-09Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-2/+2
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix endian conversion issue in discard code
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds3-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-08Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds19-1333/+412
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (22 commits) xfs: mark the xfssyncd workqueue as non-reentrant xfs: simplify xfs_qm_detach_gdquots xfs: fix acl count validation in xfs_acl_from_disk() xfs: remove unused XBT_FORCE_SLEEP bit xfs: remove XFS_QMOPT_DQSUSER xfs: kill xfs_qm_idtodq xfs: merge xfs_qm_dqinit_core into the only caller xfs: add a xfs_dqhold helper xfs: simplify xfs_qm_dqattach_grouphint xfs: nest qm_dqfrlist_lock inside the dquot qlock xfs: flatten the dquot lock ordering xfs: implement lazy removal for the dquot freelist xfs: remove XFS_DQ_INACTIVE xfs: cleanup xfs_qm_dqlookup xfs: cleanup dquot locking helpers xfs: remove the sync_mode argument to xfs_qm_dqflush_all xfs: remove xfs_qm_sync xfs: make sure to really flush all dquots in xfs_qm_quotacheck xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush xfs: remove the lid_size field in struct log_item_desc ... Fix up trivial conflict in fs/xfs/xfs_sync.c
2012-01-06vfs: switch ->show_options() to struct dentry *Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03xfs: propagate umode_tAl Viro9-13/+13
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->mknod() to umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->create() to umode_tAl Viro1-1/+1
vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch vfs_mkdir() and ->mkdir() to umode_tAl Viro1-1/+1
vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: fix the stupidity with i_dentry in inode destructorsAl Viro1-1/+0
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: mnt_drop_write_file()Al Viro2-4/+4
new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch a bunch of places to mnt_want_write_file()Al Viro2-4/+4
it's both faster (in case when file has been opened for write) and cleaner. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03xfs: fix endian conversion issue in discard codeDave Chinner1-2/+2
When finding the longest extent in an AG, we read the value directly out of the AGF buffer without endian conversion. This will give an incorrect length, resulting in FITRIM operations potentially not trimming everything that it should. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-23xfs: log all dirty inodes in xfs_fs_sync_fsChristoph Hellwig3-24/+42
Since Linux 2.6.36 the writeback code has introduces various measures for live lock prevention during sync(). Unfortunately some of these are actively harmful for the XFS model, where the inode gets marked dirty for metadata from the data I/O handler. The older_than_this checks that are now more strictly enforced since writeback: avoid livelocking WB_SYNC_ALL writeback by only calling into __writeback_inodes_sb and thus only sampling the current cut off time once. But on a slow enough devices the previous asynchronous sync pass might not have fully completed yet, and thus XFS might mark metadata dirty only after that sampling of the cut off time for the blocking pass already happened. I have not myself reproduced this myself on a real system, but by introducing artificial delay into the XFS I/O completion workqueues it can be reproduced easily. Fix this by iterating over all XFS inodes in ->sync_fs and log all that are dirty. This might log inode that only got redirtied after the previous pass, but given how cheap delayed logging of inodes is it isn't a major concern for performance. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Tested-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-23xfs: log the inode in ->write_inode calls for kupdateChristoph Hellwig1-1/+1
If the writeback code writes back an inode because it has expired we currently use the non-blockin ->write_inode path. This means any inode that is pinned is skipped. With delayed logging and a workload that has very little log traffic otherwise it is very likely that an inode that gets constantly written to is always pinned, and thus we keep refusing to write it. The VM writeback code at that point redirties it and doesn't try to write it again for another 30 seconds. This means under certain scenarious time based metadata writeback never happens. Fix this by calling into xfs_log_inode for kupdate in addition to data integrity syncs, and thus transfer the inode to the log ASAP. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Tested-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-21Merge branch 'master' into pm-sleepRafael J. Wysocki9-213/+274
* master: (848 commits) SELinux: Fix RCU deref check warning in sel_netport_insert() binary_sysctl(): fix memory leak mm/vmalloc.c: remove static declaration of va from __get_vm_area_node ipmi_watchdog: restore settings when BMC reset oom: fix integer overflow of points in oom_badness memcg: keep root group unchanged if creation fails nilfs2: potential integer overflow in nilfs_ioctl_clean_segments() nilfs2: unbreak compat ioctl cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask evm: prevent racing during tfm allocation evm: key must be set once during initialization mmc: vub300: fix type of firmware_rom_wait_states module parameter Revert "mmc: enable runtime PM by default" mmc: sdhci: remove "state" argument from sdhci_suspend_host x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT IB/qib: Correct sense on freectxts increment and decrement RDMA/cma: Verify private data length cgroups: fix a css_set not found bug in cgroup_attach_proc oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel" ... Conflicts: kernel/cgroup_freezer.c
2011-12-19xfs: mark the xfssyncd workqueue as non-reentrantChristoph Hellwig1-5/+5
On a system with lots of memory pressure that is stuck on synchronous inode reclaim the workqueue code will run one instance of the inode reclaim work item on every CPU. which is not what we want. Make sure to mark the xfssyncd workqueue as non-reentrant to make sure there only is one instace of each running globally. Also stop using special paramater for the workqueue; now that we guarantee each fs has only running one of each works at a time there is no need to artificially lower max_active and compensate for that by setting the WQ_CPU_INTENSIVE flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16xfs: simplify xfs_qm_detach_gdquotsChristoph Hellwig1-17/+5
There is no reason to drop qi_dqlist_lock around calls to xfs_qm_dqrele because the free list lock now nests inside qi_dqlist_lock and the dquot lock. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16xfs: fix acl count validation in xfs_acl_from_disk()Xi Wang1-1/+1
Commit fa8b18ed didn't prevent the integer overflow and possible memory corruption. "count" can go negative and bypass the check. Signed-off-by: Xi Wang <xi.wang@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16xfs: remove unused XBT_FORCE_SLEEP bitEric Sandeen2-7/+2
XBT_FORCE_SLEEP is no longer ever tested; it is only set and cleared. Remove it. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: remove XFS_QMOPT_DQSUSERChristoph Hellwig4-34/+18
Just read the id 0 dquot from disk directly in xfs_qm_init_quotainfo instead of going through dqget and requiring a special flag to not add the dquot to any lists. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: kill xfs_qm_idtodqChristoph Hellwig1-87/+50
This function doesn't help the code flow, so merge the dquot allocation and transaction handling into xfs_qm_dqread. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: merge xfs_qm_dqinit_core into the only callerChristoph Hellwig1-20/+7
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: add a xfs_dqhold helperChristoph Hellwig3-39/+21
Factor the common pattern of: xfs_dqlock(dqp); XFS_DQHOLD(dqp); xfs_dqunlock(dqp); into a new helper, and remove XFS_DQHOLD now that only one other caller is left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: simplify xfs_qm_dqattach_grouphintChristoph Hellwig1-48/+16
No need to play games with the qlock now that the freelist lock nests inside it. Also clean up various outdated comments. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14xfs: nest qm_dqfrlist_lock inside the dquot qlockChristoph Hellwig2-60/+41
Allow xfs_qm_dqput to work without trylock loops by nesting the freelist lock inside the dquot qlock. In turn that requires trylocks in the reclaim path instead, but given it's a classic tradeoff between fast and slow path, and we follow the model of the inode and dentry caches. Document our new lock order now that it has settled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14xfs: flatten the dquot lock orderingChristoph Hellwig4-150/+103
Introduce a new XFS_DQ_FREEING flag that tells lookup and mplist walks to skip a dquot that is beeing freed, and use this avoid the trylock on the hash and mplist locks in xfs_qm_dqreclaim_one. Also simplify xfs_dqpurge by moving the inodes to a dispose list after marking them XFS_DQ_FREEING and avoid the locker ordering constraints. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: implement lazy removal for the dquot freelistChristoph Hellwig4-65/+30
Do not remove dquots from the freelist when we grab a reference to them in xfs_qm_dqlookup, but leave them on the freelist util scanning notices that they have a reference. This speeds up the lookup fastpath, and greatly simplifies the lock ordering constraints. Note that the same scheme is used by the VFS inode and dentry caches. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: remove XFS_DQ_INACTIVEChristoph Hellwig3-69/+24
Free dquots when purging them during umount instead of keeping them around on the freelist in a degraded state. The out of order locking in xfs_qm_dqpurge will be removed again later in this series. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: cleanup xfs_qm_dqlookupChristoph Hellwig1-20/+5
Rearrange the code to avoid the conditional locking around the flist_locked variable. This means we lose a (rather pointless) assert, and hold the freelist lock a bit longer for one corner case. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: cleanup dquot locking helpersChristoph Hellwig4-35/+25
Mark the trivial lock wrappers as inline, and make the naming consistent for all of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: remove the sync_mode argument to xfs_qm_dqflush_allChristoph Hellwig1-4/+3
It always is zero, and removing it will make future changes easier. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: remove xfs_qm_syncChristoph Hellwig5-119/+3
Now that we can't have any dirty dquots around that aren't in the AIL we can get rid of the explicit dquot syncing from xfssyncd and xfs_fs_sync_fs and instead rely on AIL pushing to write out any quota updates. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: make sure to really flush all dquots in xfs_qm_quotacheckChristoph Hellwig1-1/+1
Make sure we do not skip any dquots when flushing them out after a quotacheck to make sure that we will never have any dirty dquots on a live filesystem. At this point no dquot should be pinnable, but lets be pedantic about it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflushChristoph Hellwig3-4/+4
Only skip pinned dquots if SYNC_TRYLOCK is specified, and adjust the callers to keep the behaviour unchanged. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08xfs: remove the lid_size field in struct log_item_descChristoph Hellwig5-10/+6
Outside the now removed nodelaylog code this field is only used for asserts and can be safely removed now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08xfs: cleanup the transaction commit path a bitChristoph Hellwig3-99/+63
Now that the nodelaylog mode is gone we can simplify the transaction commit path a bit by removing the xfs_trans_commit_cil routine. Restoring the process flags is merged into xfs_trans_commit which already does it for the error path, and allocating the log vectors is merged into xlog_cil_format_items, which already fills them with data, thus avoiding one loop over all log items. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08xfs: remove the deprecated nodelaylog optionChristoph Hellwig6-486/+26
The delaylog mode has been the default for a long time, and the nodelaylog option has been scheduled for removal in Linux 3.3. Remove it and code only used by it now that we have opened the 3.3 window. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-06xfs: fix the logspace waiting algorithmChristoph Hellwig2-183/+177
Apply the scheme used in log_regrant_write_log_space to wake up any other threads waiting for log space before the newly added one to log_regrant_write_log_space as well, and factor the code into readable helpers. For each of the queues we have add two helpers: - one to try to wake up all waiting threads. This helper will also be usable by xfs_log_move_tail once we remove the current opportunistic wakeups in it. - one to sleep on t_wait until enough log space is available, loosely modelled after Linux waitqueues. And use them to reimplement the guts of log_regrant_write_log_space and log_regrant_write_log_space. These two function now use one and the same algorithm for waiting on log space instead of subtly different ones before, with an option to completely unify them in the near future. Also move the filesystem shutdown handling to the common caller given that we had to touch it anyway. Based on hard debugging and an earlier patch from Chandra Seetharaman <sekharan@us.ibm.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com> Tested-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Ben Myers <bpm@sgi.com>