summaryrefslogtreecommitdiffstats
path: root/fs/udf/super.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-02udf: fix potential refcnt problem of nls moduleChengguang Xu1-5/+10
When specifiying iocharset multiple times in a mount or once/multiple in a remount, current option parsing may cause inaccurate refcount of nls module. Also, in the failure cleanup of option parsing, the condition of calling unload_nls is not sufficient. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-03-02udf: Do not mark possibly inconsistent filesystems as closedJan Kara1-2/+6
If logical volume integrity descriptor contains non-closed integrity type when mounting the volume, there are high chances that the volume is not consistent (device was detached before the filesystem was unmounted). Don't touch integrity type of such volume so that fsck can recognize it and check such filesystem. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Remove never implemented mount optionsJan Kara1-27/+1
Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Provide saner default for invalid uid / gidJan Kara1-2/+3
Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by: Steve Kenton <skenton@ou.edu> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Ignore [ug]id=ignore mount optionsJan Kara1-8/+2
Currently uid=ignore and gid=ignore make no sense without uid=<number> and gid=<number> respectively as they result in all files having invalid uid / gid which then doesn't allow even root to modify files and thus causes confusion. And since commit ca76d2d8031f "UDF: fix UID and GID mount option ignorance" (from over 10 years ago) uid=<number> overrides all uids on disk as uid=ignore does. So just silently ignore uid=ignore mount option. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Fix handling of Partition DescriptorsJan Kara1-32/+73
Current handling of Partition Descriptors in Volume Descriptor Sequence is buggy in several ways. Firstly, it does not take descriptor sequence numbers into account at all, thus any volume making serious use of them would be unmountable. Secondly, it does not handle Volume Descriptor Pointers or Volume Descriptor Sequence without Terminating Descriptor. Fix these problems by properly remembering all Partition Descriptors in the Volume Descriptor Sequence and their sequence numbers. This is made more complicated by the fact that we don't know number of partitions in advance and sequence numbers have to be tracked on per-partition basis. Reported-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Unify common handling of descriptorsJan Kara1-22/+19
When scanning Volume Descriptor Sequence, several descriptors have exactly the same handling. Unify it. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Convert descriptor index definitions to enumJan Kara1-8/+9
Convert index definitions from defines to enum. It is a shorter description and easier to modify. Also remove VDS_POS_VOL_DESC_PTR since it is unused. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Allow volume descriptor sequence to be terminated by unrecorded blockJan Kara1-6/+2
According to ECMA-167 3/8.4.2 a volume descriptor sequence can be terminated also by an unrecorded block within the extent of volume descriptor sequence. Currently we errored out in such case making such volumes unmountable. Handle that case by treating any invalid block as a block terminating the sequence. Reported-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Simplify handling of Volume Descriptor PointersJan Kara1-25/+16
According to ECMA-167 3/8.4.2 Volume Descriptor Pointer is terminating current extent of Volume Descriptor Sequence. Also according to ECMA-167 3/8.4.3 Volume Descriptor Sequence Number is not significant for Volume Descriptor Pointers. Simplify the handling of Volume Descriptor Pointers to take this into account. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Fix off-by-one in volume descriptor sequence lengthJan Kara1-3/+3
We pass one block beyond end of volume descriptor sequence into process_sequence() as 'lastblock' instead of the last block of the sequence. When the sequence is not terminated with TD descriptor, this could lead to false errors due to invalid blocks in volume descriptor sequence and thus unmountable volumes. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds1-3/+3
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-17udf: Fix signed/unsigned format specifiersSteve Magnani1-26/+26
Fix problems noted in compilion with -Wformat=2 -Wformat-signedness. In particular, a mismatch between the signedness of a value and the signedness of its format specifier can result in unsigned values being printed as negative numbers, e.g.: Partition (0 type 1511) starts at physical 460, block length -1779968542 ...which occurs when mounting a large (> 1 TiB) UDF partition. Changes since V1: * Fixed additional issues noted in udf_bitmap_free_blocks(), udf_get_fileident(), udf_show_options() Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFFSteve Magnani1-1/+1
Large (> 1 TiB) UDF filesystems appear subject to several problems when mounted on 64-bit systems: * readdir() can fail on a directory containing File Identifiers residing above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO. * FIBMAP on a file block located above 0x7FFFFFFF can return a negative value. The low 32 bits are correct, but applications that don't mask the high 32 bits of the result can perform incorrectly. Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation of UDF block addresses. Ultimately, all driver functions that manipulate UDF block addresses should use this type; for now, deployment is limited to functions with actual or potential sign extension issues. Changes to udf_readdir() and udf_block_map() address the issues noted above; other changes address potential similar issues uncovered during audit of the driver code. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-16udf: Avoid overflow when session starts at large offsetJan Kara1-1/+1
When session starts beyond offset 2^31 the arithmetics in udf_check_vsd() would overflow. Make sure the computation is done in large enough type. Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl> Signed-off-by: Jan Kara <jack@suse.cz>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-08-16fs-udf: Delete an error message for a failed memory allocation in two functionsMarkus Elfring1-2/+0
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2017-08-16fs-udf: Improve six size determinationsMarkus Elfring1-3/+2
Replace the specification of data structures by variable references as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2017-08-16fs-udf: Adjust two checks for null pointersMarkus Elfring1-2/+3
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-7/+7
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-13udf: Remove unused UDF_DEFAULT_BLOCKSIZEJan Kara1-2/+0
The define is unused. Remove it. Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-20udf: allow implicit blocksize specification during mountFabian Frederick1-9/+19
udf_fill_super() used udf_parse_options() to flag UDF_FLAG_BLOCKSIZE_SET when blocksize was specified otherwise used 512 bytes (bdev_logical_block_size) and 2048 bytes (UDF_DEFAULT_BLOCKSIZE) IOW both 1024 and 4096 specifications were required or resulted in "mount: wrong fs type, bad option, bad superblock on /dev/loop1" This patch loops through different block values but also updates udf_load_vrs() to return -EINVAL instead of 0 when udf_check_vsd() fails (and uopt->novrs = 0). The later being the reason for the RFC; we have that case when mounting a 4kb blocksize against other values but maybe VRS is not mandatory there ? Tested with 512, 1024, 2048 and 4096 blocksize Reported-by: Jan Kara <jack@suse.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: atomically read inode sizeFabian Frederick1-3/+4
See i_size_read() comments in include/linux/fs.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: merge module informations in super.cFabian Frederick1-3/+6
Move all module attributes at the end of one file like other FS. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-03fs: udf: Replace CURRENT_TIME with current_time()Deepa Dinamani1-3/+6
CURRENT_TIME is not y2038 safe. CURRENT_TIME macro is also not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Logical Volume Integrity format is described to have the same timestamp format for "Recording Date and time" as the other [a,c,m]timestamps. The function udf_time_to_disk_format() does this conversion. Hence the timestamp is passed directly to the function and not truncated. This is as per Arnd's suggestion on the thread. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-05-19udf: Use correct partition reference number for metadataAlden Tondettar1-10/+12
UDF/OSTA terminology is confusing. Partition Numbers (PNs) are arbitrary 16-bit values, one for each physical partition in the volume. Partition Reference Numbers (PRNs) are indices into the the Partition Map Table and do not necessarily equal the PN of the mapped partition. The current metadata code mistakenly uses the PN instead of the PRN when mapping metadata blocks to physical/sparable blocks. Windows-created UDF 2.5 discs for some reason use large, arbitrary PNs, resulting in mount failure and KASAN read warnings in udf_read_inode(). For example, a NetBSD UDF 2.5 partition might look like this: PRN PN Type --- -- ---- 0 0 Sparable 1 0 Metadata Since PRN == PN, we are fine. But Windows could gives us: PRN PN Type --- ---- ---- 0 8192 Sparable 1 8192 Metadata So udf_read_inode() will start out by checking the partition length in sbi->s_partmaps[8192], which is obviously out of bounds. Fix this by creating a new field (s_phys_partition_ref) in struct udf_meta_data, referencing whatever physical or sparable map has the same partition number as the metadata partition. [JK: Add comment about s_phys_partition_ref, change its name] Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-04-26udf: Prevent stack overflow on corrupted filesystem mountAlden Tondettar1-24/+43
Presently, a corrupted or malicious UDF filesystem containing a very large number (or cycle) of Logical Volume Integrity Descriptor extent indirections may trigger a stack overflow and kernel panic in udf_load_logicalvolint() on mount. Replace the unnecessary recursion in udf_load_logicalvolint() with simple iteration. Set an arbitrary limit of 1000 indirections (which would have almost certainly overflowed the stack without this fix), and treat such cases as if there were no LVID. Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-04-25udf: Fix conversion of 'dstring' fields to UTF8Andrew Gabbasov1-2/+2
Commit 9293fcfbc1812a22ad5ce1b542eb90c1bbe01be1 ("udf: Remove struct ustr as non-needed intermediate storage"), while getting rid of 'struct ustr', does not take any special care of 'dstring' fields and effectively use fixed field length instead of actual string length, encoded in the last byte of the field. Also, commit 484a10f49387e4386bf2708532e75bf78ffea2cb ("udf: Merge linux specific translation into CS0 conversion function") introduced checking of the length of the string being converted, requiring proper alignment to number of bytes constituing each character. The UDF volume identifier is represented as a 32-bytes 'dstring', and needs to be converted from CS0 to UTF8, while mounting UDF filesystem. The changes in mentioned commits can in some cases lead to incorrect handling of volume identifier: - if the actual string in 'dstring' is of maximal length and does not have zero bytes separating it from dstring encoded length in last byte, that last byte may be included in conversion, thus making incorrect resulting string; - if the identifier is encoded with 2-bytes characters (compression code is 16), the length of 31 bytes (32 bytes of field length minus 1 byte of compression code), taken as the string length, is reported as an incorrect (unaligned) length, and the conversion fails, which in its turn leads to volume mounting failure. This patch introduces handling of 'dstring' encoded length field in udf_CS0toUTF8 function, that is used in all and only cases when 'dstring' fields are converted. Currently these cases are processing of Volume Identifier and Volume Set Identifier fields. The function is also renamed to udf_dstrCS0toUTF8 to distinctly indicate that it handles 'dstring' input. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09udf: Remove struct ustr as non-needed intermediate storageAndrew Gabbasov1-23/+13
Although 'struct ustr' tries to structurize the data by combining the string and its length, it doesn't actually make much benefit, since it saves only one parameter, but introduces an extra copying of the whole buffer, serving as an intermediate storage. It looks quite inefficient and not actually needed. This commit gets rid of the struct ustr by changing the parameters of some functions appropriately. Also, it removes using 'dstring' type, since it doesn't make much sense too. Just using the occasion, add a 'const' qualifier to udf_get_filename to make consistent parameters sets. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09udf: Adjust UDF_NAME_LEN to better reflect actual restrictionsAndrew Gabbasov1-1/+1
Actual name length restriction is 254 bytes, this is used in 'ustr' structure, and this is what fits into UDF File Ident structures. And in most cases the constant is used as UDF_NAME_LEN-2. So, it's better to just modify the constant to make it closer to reality. Also, in some cases it's useful to have a separate constant for the maximum length of file name field in CS0 encoding in UDF File Ident structures. Also, remove the unused UDF_PATH_LEN constant. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-01-22tree wide: use kvfree() than conditional kfree()/vfree()Tetsuo Handa1-6/+1
There are many locations that do if (memory_was_allocated_by_vmalloc) vfree(ptr); else kfree(ptr); but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory using is_vmalloc_addr(). Unless callers have special reasons, we can replace this branch with kvfree(). Please check and reply if you found problems. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: David Rientjes <rientjes@google.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Boris Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15Merge branch 'for_linus' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes and quota cleanups from Jan Kara: "Several UDF fixes and some minor quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Check output buffer length when converting name to CS0 udf: Prevent buffer overrun with multi-byte characters quota: constify qtree_fmt_operations structures udf: avoid uninitialized variable use udf: Fix lost indirect extent block udf: Factor out code for creating indirect extent udf: limit the maximum number of indirect extents in a row udf: limit the maximum number of TD redirections fs: make quota/dquot.c explicitly non-modular fs: make quota/netlink.c explicitly non-modular
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov1-1/+2
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-14udf: limit the maximum number of TD redirectionsVegard Nossum1-0/+14
Filesystem fuzzing revealed that we could get stuck in the udf_process_sequence() loop. The maximum limit was chosen arbitrarily but fixes the problem I saw. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-08-20udf: Don't modify filesystem for read-only mountsJan Kara1-2/+5
When read-write mount of a filesystem is requested but we find out we can mount the filesystem only in read-only mode, we still modify LVID in udf_close_lvid(). That is both unnecessary and contrary to expectation that when we fall back to read-only mount we don't modify the filesystem. Make sure we call udf_close_lvid() only if we called udf_open_lvid() so that filesystem gets modified only if we verified we are allowed to write to it. Reported-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jan Kara <jack@suse.com>
2015-05-21udf: fix udf_load_pvoldesc()Dan Carpenter1-1/+2
There are some missing braces here which means this function never succeeds. Fixes: e9d4cf411f75 ('udf: improve error management in udf_CS0toUTF8()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-05-18udf: improve error management in udf_CS0toUTF8()Fabian Frederick1-9/+14
udf_CS0toUTF8() now returns -EINVAL on error. udf_load_pvoldesc() and udf_get_filename() do the same. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14udf: remove redundant buffer_head.h includesFabian Frederick1-1/+0
buffer_head.h was already included in udfdecl.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-02-05udf: use bool for doneFabian Frederick1-2/+2
variable 'done' is only used for true/false in loop. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-12udf: destroy sbi mutex in put_superFabian Frederick1-0/+1
Call mutex_destroy() on superblock mutex in udf_put_super() otherwise mutex debugging code isn't able to detect that mutex is used after being freed. (thanks to Jan Kara for complete definition). Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: One function call less in udf_fill_super() after error detectionMarkus Elfring1-2/+3
The iput() function was called in up to three cases by the udf_fill_super() function during error handling even if the passed data structure element contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: Deletion of unnecessary checks before the function call "iput"Markus Elfring1-4/+2
The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-09udf: Fix loading of special inodesJan Kara1-5/+5
Some UDF media have special inodes (like VAT or metadata partition inodes) whose link_count is 0. Thus commit 4071b9136223 (udf: Properly detect stale inodes) broke loading these inodes because udf_iget() started returning -ESTALE for them. Since we still need to properly detect stale inodes queried by NFS, create two variants of udf_iget() - one which is used for looking up special inodes (which ignores link_count == 0) and one which is used for other cases which return ESTALE when link_count == 0. Fixes: 4071b913622316970d0e1919f7d82b4403fec5f2 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Make udf_read_inode() and udf_iget() return errorJan Kara1-28/+41
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15udf: use linux/uaccess.hFabian Frederick1-1/+1
Fix checkpatch warning WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-04-07Merge branch 'for_linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3 improvements, cleanups, reiserfs fix from Jan Kara: "various cleanups for ext2, ext3, udf, isofs, a documentation update for quota, and a fix of a race in reiserfs readdir implementation" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix race in readdir ext2: acl: remove unneeded include of linux/capability.h ext3: explicitly remove inode from orphan list after failed direct io fs/isofs/inode.c add __init to init_inodecache() ext3: Speedup WB_SYNC_ALL pass fs/quota/Kconfig: Update filesystems ext3: Update outdated comment before ext3_ordered_writepage() ext3: Update PF_MEMALLOC handling in ext3_write_inode() ext2/3: use prandom_u32() instead of get_random_bytes() ext3: remove an unneeded check in ext3_new_blocks() ext3: remove unneeded check in ext3_ordered_writepage() fs: Mark function as static in ext3/xattr_security.c fs: Mark function as static in ext3/dir.c fs: Mark function as static in ext2/xattr_security.c ext3: Add __init macro to init_inodecache ext2: Add __init macro to init_inodecache udf: Add __init macro to init_inodecache fs: udf: parse_options: blocksize check
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o1-0/+1
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-03-03udf: Add __init macro to init_inodecacheFabian Frederick1-1/+1
init_inodecache is only called by __init init_udf_fs. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-03-03fs: udf: parse_options: blocksize checkFabian Frederick1-1/+5
Both affs and isofs check for blocksize integrity during parse_options.Do the same thing for udf. Valid values : 512, 1024, 2048 or 4096 bytes. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2013-10-18udf: fix for pathetic mount times in case of invalid file systemPeter A. Felvegi1-9/+36
The UDF driver was not strict enough about checking the IDs in the VSDs when mounting, which resulted in reading through all the sectors of the block device in some unfortunate cases. Eg, trying to mount my uninitialized 200G SSD partition (all 0xFF bytes) took ~350 minutes to fail, because the code expected some of the valid IDs or a zero byte. During this, the mount couldn't be killed, sync from the cmdline blocked, and the machine froze into the shutdown. Valid filesystems (extX, btrfs, ntfs) were rejected by the mere accident of having a zero byte at just the right place in some of their sectors, close enough to the beginning not to generate excess I/O. The fix adds a hard limit on the VSD sector offset, adds the two missing VSD IDs, and stops scanning when encountering an invalid ID. Also replaced the magic number 32768 with a more meaningful #define, and supressed the bogus message about failing to read the first sector if no UDF fs was detected. Signed-off-by: Peter A. Felvegi <petschy@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 15:40:54 +0000