summaryrefslogtreecommitdiffstats
path: root/fs/udf/ialloc.c
AgeCommit message (Collapse)AuthorFilesLines
2009-04-02udf: Don't write integrity descriptor too oftenJan Kara1-3/+2
We update information in logical volume integrity descriptor after each allocation (as LVID contains free space, number of directories and files on disk etc.). If the filesystem is on some phase change media, this leads to its quick degradation as such media is able to handle only 10000 overwrites or so. We solve the problem by writing new information into LVID only on umount, remount-ro and sync. This solves the problem at the price of longer media inconsistency (previously media became consistent after pdflush flushed dirty LVID buffer) but that should be acceptable. Report by and patch written in cooperation with Rich Coe <Richard.Coe@med.ge.com>. Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02Fix the udf code not to pass structs on stack where possible.Pekka Enberg1-2/+2
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jan Kara <jack@suse.cz>
2009-03-26udf: Use lowercase names of quota functionsJan Kara1-4/+4
Use lowercase names of quota functions instead of old uppercase ones. Signed-off-by: Jan Kara <jack@suse.cz>
2008-11-14CRED: Wrap task credential accesses in the UDF filesystemDavid Howells1-2/+2
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-19udf: Fix error paths in udf_new_inode()Jan Kara1-23/+18
I case we failed to allocate memory for inode when creating it, we did not properly free block already allocated for this inode. Move memory allocation before the block allocation which fixes this issue (thanks for the idea go to Ingo Oeser <ioe-lkml@rameria.de>). Also remove a few superfluous initializations already done in udf_alloc_inode(). Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-08-19udf: Fix lock inversion between iprune_mutex and alloc_mutex (v2)Jan Kara1-2/+1
A memory allocation inside alloc_mutex must not recurse back into the filesystem itself because that leads to lock inversion between iprune_mutex and alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually needed only to update allocation statistics in the superblock so we can drop it before we start allocating memory for the inode. tar D ffff81015b9c8c90 0 6614 6612 ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000 ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000 0000000000000003 0000000000000000 0000000000000000 0000000000000000 Call Trace: [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b [<ffffffff803c1bef>] mutex_lock+0xa/0xb [<ffffffff8027f8c2>] shrink_icache_memory+0x38/0x200 [<ffffffff80257742>] shrink_slab+0xe3/0x15b [<ffffffff802579db>] try_to_free_pages+0x221/0x30d [<ffffffff8025657e>] isolate_pages_global+0x0/0x31 [<ffffffff8025324b>] __alloc_pages_internal+0x252/0x3ab [<ffffffff8026b08b>] cache_alloc_refill+0x22e/0x47b [<ffffffff8026ae37>] kmem_cache_alloc+0x3b/0x61 [<ffffffff8026b15b>] cache_alloc_refill+0x2fe/0x47b [<ffffffff8026b34e>] __kmalloc+0x76/0x9c [<ffffffffa00751f2>] :udf:udf_new_inode+0x202/0x2e2 [<ffffffffa007ae5e>] :udf:udf_create+0x2f/0x16d [<ffffffffa0078f27>] :udf:udf_lookup+0xa6/0xad ... kswapd0 D ffff81015b9d9270 0 125 2 ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490 ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90 Call Trace: [<ffffffff8028cbb0>] __set_page_dirty+0xeb/0xf5 [<ffffffff8025403a>] get_dirty_limits+0x1d/0x22f [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b [<ffffffff803c1bef>] mutex_lock+0xa/0xb [<ffffffffa0073f58>] :udf:udf_bitmap_free_blocks+0x47/0x1eb [<ffffffffa007df31>] :udf:udf_discard_prealloc+0xc6/0x172 [<ffffffffa007875a>] :udf:udf_clear_inode+0x1e/0x48 [<ffffffff8027f121>] clear_inode+0x6d/0xc4 [<ffffffff8027f7f2>] dispose_list+0x56/0xee [<ffffffff8027fa5a>] shrink_icache_memory+0x1d0/0x200 [<ffffffff80257742>] shrink_slab+0xe3/0x15b [<ffffffff80257e93>] kswapd+0x346/0x447 ... Reported-by: Tibor Tajti <tibor.tajti@gmail.com> Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: replace all adds to little endians variables with le*_add_cpumarcin.slusarz@gmail.com1-8/+4
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); sparse didn't generate any new warning with this patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: move headers out include/linux/Christoph Hellwig1-1/+0
There's really no reason to keep udf headers in include/linux as they're not used by anything but fs/udf/. This patch merges most of include/linux/udf_fs_i.h into fs/udf/udf_i.h, include/linux/udf_fs_sb.h into fs/udf/udf_sb.h and include/linux/udf_fs.h into fs/udf/udfdecl.h. The only thing remaining in include/linux/ is a stub of udf_fs_i.h defining the four user-visible udf ioctls. It's also moved from unifdef-y to headers-y because it can be included unconditionally now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-02-08udf: cache struct udf_inode_infoMarcin Slusarz1-23/+26
cache UDF_I(struct inode *) return values when there are at least 2 uses in one function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: remove UDF_I_* macros and open code themMarcin Slusarz1-25/+25
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: fix coding styleMarcin Slusarz1-7/+17
fix coding style errors found by checkpatch: - assignments in if conditions - braces {} around single statement blocks - no spaces after commas - printks without KERN_* - lines longer than 80 characters - spaces between "type *" and variable name before: 192 errors, 561 warnings, 8987 lines checked after: 1 errors, 38 warnings, 9468 lines checked Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: remove some ugly macrosMarcin Slusarz1-14/+19
remove macros: - UDF_SB_PARTMAPS - UDF_SB_PARTTYPE - UDF_SB_PARTROOT - UDF_SB_PARTLEN - UDF_SB_PARTVSN - UDF_SB_PARTNUM - UDF_SB_TYPESPAR - UDF_SB_TYPEVIRT - UDF_SB_PARTFUNC - UDF_SB_PARTFLAGS - UDF_SB_VOLIDENT - UDF_SB_NUMPARTS - UDF_SB_PARTITION - UDF_SB_SESSION - UDF_SB_ANCHOR - UDF_SB_LASTBLOCK - UDF_SB_LVIDBH - UDF_SB_LVID - UDF_SB_UMASK - UDF_SB_GID - UDF_SB_UID - UDF_SB_RECORDTIME - UDF_SB_SERIALNUM - UDF_SB_UDFREV - UDF_SB_FLAGS - UDF_SB_VAT - UDF_UPDATE_UDFREV - UDF_SB_FREE and open code them convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function rename some struct udf_sb_info fields: - s_volident to s_volume_ident - s_lastblock to s_last_block - s_lvidbh to s_lvid_bh - s_recordtime to s_record_time - s_serialnum to s_serial_number; - s_vat to s_vat_inode; Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21UDF: coding style conversion - lindent fixupsCyrill Gorcunov1-25/+13
This patch fixes up sources after conversion by Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19UDF: coding style conversion - lindentCyrill Gorcunov1-33/+36
This patch converts UDF coding style to kernel coding style using Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16UDF: check for allocated memory for data of new inodesCyrill Gorcunov1-1/+8
Add checking for granted memory for inode data at the moment of its creation. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-09-27[PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o1-1/+0
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] fs: Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris1-4/+2
Conversions from kmalloc+memset to kzalloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] udf: initialize parts of inode earlier in createEric Sandeen1-5/+6
I saw an oops down this path when trying to create a new file on a UDF filesystem which was internally marked as readonly, but mounted rw: udf_create udf_new_inode new_inode alloc_inode udf_alloc_inode udf_new_block returns EIO due to readonlyness iput (on error) udf_put_inode udf_discard_prealloc udf_next_aext udf_current_aext udf_get_fileshortad OOPS the udf_discard_prealloc() path was examining uninitialized fields of the udf inode. udf_discard_prealloc() already has this code to short-circuit the discard path if no extents are preallocated: if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB || inode->i_size == UDF_I_LENEXTENTS(inode)) { return; } so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode, we won't try to free the (not) preallocated blocks, since this will match the i_size = 0 set when the inode was initialized. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] sem2mutex: UDFIngo Molnar1-4/+4
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-03remove pointers to the defunct UDF mailing listAdrian Bunk1-5/+0
This patch removes pointers to the defunct UDF mailing list. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+170
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 07:50:08 +0000