summaryrefslogtreecommitdiffstats
path: root/fs/ubifs
AgeCommit message (Collapse)AuthorFilesLines
2018-12-28mm: migrate: drop unused argument of migrate_page_move_mapping()Jan Kara1-1/+1
All callers of migrate_page_move_mapping() now pass NULL for 'head' argument. Drop it. Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge branch 'linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-13ubifs: Handle re-linking of inodes correctly while recoveryRichard Weinberger1-0/+37
UBIFS's recovery code strictly assumes that a deleted inode will never come back, therefore it removes all data which belongs to that inode as soon it faces an inode with link count 0 in the replay list. Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE it can lead to data loss upon a power-cut. Consider a journal with entries like: 0: inode X (nlink = 0) /* O_TMPFILE was created */ 1: data for inode X /* Someone writes to the temp file */ 2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */ 3: inode X (nlink = 1) /* inode was re-linked via linkat() */ Upon replay of entry #2 UBIFS will drop all data that belongs to inode X, this will lead to an empty file after mounting. As solution for this problem, scan the replay list for a re-link entry before dropping data. Fixes: 474b93704f32 ("ubifs: Implement O_TMPFILE") Cc: stable@vger.kernel.org Cc: Russell Senior <russell@personaltelco.net> Cc: Rafał Miłecki <zajec5@gmail.com> Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: Fix default compression selection in ubifsGabor Juhos1-1/+12
When ubifs is build without the LZO compressor and no compressor is given the creation of the default file system will fail. before selection the LZO compressor check if it is present and if not fall back to the zlib or none. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: Fix memory leak on error conditionGarry McNulty1-6/+6
If the call to ubifs_read_nnode() fails in ubifs_lpt_calc_hash() an error is returned without freeing the memory allocated to 'buf'. Read and check the root node before allocating the buffer. Detected by CoverityScan, CID 1441025 ("Resource leak") Signed-off-by: Garry McNulty <garrmcnu@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: auth: Add CONFIG_KEYS dependencyArnd Bergmann1-0/+1
The new authentication support causes a build failure when CONFIG_KEYS is disabled, so add a dependency. fs/ubifs/auth.c: In function 'ubifs_init_authentication': fs/ubifs/auth.c:249:16: error: implicit declaration of function 'request_key'; did you mean 'request_irq'? [-Werror=implicit-function-declaration] keyring_key = request_key(&key_type_logon, c->auth_key_name, NULL); Fixes: d8a22773a12c ("ubifs: Enable authentication support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: CONFIG_UBIFS_FS_AUTHENTICATION should depend on UBIFS_FSGeert Uytterhoeven1-8/+7
Instead of adding yet another dependency on UBIFS_FS, wrap the whole block of ubifs config options in a single "if UBIFS_FS". Fixes: d8a22773a12c6d78 ("ubifs: Enable authentication support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: replay: Fix high stack usageArnd Bergmann1-11/+24
Having two shash descriptors on the stack cause a very significant kernel stack usage that can cross the warning threshold: fs/ubifs/replay.c: In function 'authenticate_sleb': fs/ubifs/replay.c:633:1: error: the frame size of 1144 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Normally, gcc optimizes the out, but with CONFIG_CC_OPTIMIZE_FOR_DEBUGGING, it does not. Splitting the two stack allocations into separate functions means that they will use the same memory again. In normal configurations (optimizing for size or performance), those should get inlined and we get the same behavior as before. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'shash' tfm allocationsEric Biggers1-3/+2
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_shash() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-23ubifs: Remove unneeded semicolonDing Xiang1-1/+1
delete redundant semicolon Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Enable authentication supportSascha Hauer2-1/+45
With the preparations all being done this patch now enables authentication support for UBIFS. Authentication is enabled when the newly introduced auth_key and auth_hash_name mount options are passed. auth_key provides the key which is used for authentication whereas auth_hash_name provides the hashing algorithm used for this FS. Passing these options make authentication mandatory and only UBIFS images that can be authenticated with the given key are allowed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Do not update inode size in-place in authenticated modeSascha Hauer3-38/+113
In authenticated mode we cannot fixup the inode sizes in-place during recovery as this would invalidate the hashes and HMACs we stored for this inode. Instead, we just write the updated inodes to the journal. We can only do this after ubifs_rcvry_gc_commit() is done though, so for authenticated mode call ubifs_recover_size() after ubifs_rcvry_gc_commit() and not vice versa as normally done. Calling ubifs_recover_size() after ubifs_rcvry_gc_commit() has the drawback that after a commit the size fixup information is gone, so when a powercut happens while recovering from another powercut we may lose some data written right before the first powercut. This is why we only do this in authenticated mode and leave the behaviour for unauthenticated mode untouched. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add hashes and HMACs to default filesystemSascha Hauer1-7/+27
This patch calculates the necessary hashes and HMACs for the default filesystem so that the dynamically created default fs can be authenticated. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Authenticate super block nodeSascha Hauer1-1/+69
This adds a HMAC covering the super block node and adds the logic that decides if a filesystem shall be mounted unauthenticated or authenticated. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Create hash for default LPTSascha Hauer3-3/+23
During creation of the default filesystem on an empty flash the default LPT is created. With this patch a hash over the default LPT is calculated which can be added to the default filesystems master node. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubfis: authentication: Authenticate master nodeSascha Hauer3-10/+61
The master node contains hashes over the root index node and the LPT. This patch adds a HMAC to authenticate the master node itself. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Authenticate LPTSascha Hauer3-0/+134
The LPT needs to be authenticated aswell. Since the LPT is only written during commit it is enough to authenticate the whole LPT with a single hash which is stored in the master node. Only the leaf nodes (pnodes) are hashed which makes the implementation much simpler than it would be to hash the complete LPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Authenticate replayed journalSascha Hauer1-2/+144
Make sure that during replay all buds can be authenticated. To do this we calculate the hash chain until we find an authentication node and check the HMAC in that node against the current status of the hash chain. After a power cut it can happen that some nodes have been written, but not yet the authentication node for them. These nodes have to be discarded during replay. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add auth nodes to garbage collector journal headSascha Hauer1-3/+43
To be able to authenticate the garbage collector journal head add authentication nodes to the buds the garbage collector creates. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add authentication nodes to journalSascha Hauer6-18/+153
Nodes that are written to flash can only be authenticated through the index after the next commit. When a journal replay is necessary the nodes are not yet referenced by the index and thus can't be authenticated. This patch overcomes this situation by creating a hash over all nodes beginning from the commit start node over the reference node(s) and the buds themselves. From time to time we insert authentication nodes. Authentication nodes contain a HMAC from the current hash state, so that they can be used to authenticate a journal replay up to the point where the authentication node is. The hash is continued afterwards so that theoretically we would only have to check the HMAC of the last authentication node we find. Overall we get this picture: ,,,,,,,, ,......,........................................... ,. CS , hash1.----. hash2.----. ,. | , . |hmac . |hmac ,. v , . v . v ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... ,..|...,........................................... , | , , | ,,,,,,,,,,,,,,, . | hash3,----. , | , |hmac , v , v , REF#1 -> bud -> bud,-> auth ... ,,,|,,,,,,,,,,,,,,,,,, v REF#2 -> ... | V ... Note how hash3 covers CS, REF#0 and REF#1 so that it is not possible to exchange or skip any reference nodes. Unlike the picture suggests the auth nodes themselves are not hashed. With this it is possible for an offline attacker to cut each journal head or to drop the last reference node(s), but not to skip any journal heads or to reorder any operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Add hashes to index nodesSascha Hauer7-14/+81
With this patch the hashes over the index nodes stored in the tree node cache are written to flash and are checked when read back from flash. The hash of the root index node is stored in the master node. During journal replay the hashes are regenerated from the read nodes and stored in the tree node cache. This means the nodes must previously be authenticated by other means. This is done in a later patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add hashes to the tree node cacheSascha Hauer4-30/+135
As part of the UBIFS authentication support every branch in the index gets a hash covering the referenced node. To make that happen the tree node cache needs hashes over the nodes. This patch adds a hash argument to ubifs_tnc_add() and ubifs_tnc_add_nm(). The hashes are calculated from the callers of these functions which actually prepare the nodes. With this patch all the leaf nodes of the index tree get hashes, but currently nothing is done with these hashes, this is left for a later patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Create functions to embed a HMAC in a nodeSascha Hauer2-6/+70
With authentication support some nodes (master node, super block node) get a HMAC embedded into them. This patch adds functions to prepare and write such a node. The difficulty is that besides the HMAC the nodes also have a CRC which must stay valid. This means we first have to initialize all fields in the node, then calculate the HMAC (not covering the CRC) and finally calculate the CRC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add helper functions for authentication supportSascha Hauer4-0/+722
This patch adds the various helper functions needed for authentication support. We need functions to hash nodes, to embed HMACs into a node and to compare hashes and HMACs. Most functions first check if this filesystem is authenticated and bail out early if not, which makes the functions safe to be called with disabled authentication. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add separate functions to init/crc a nodeSascha Hauer2-15/+29
When adding authentication support we will embed a HMAC into some nodes. To prepare these nodes we have to first initialize the nodes, then add a HMAC and finally add a CRC. To accomplish this add separate ubifs_init_node/ubifs_crc_node functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Format changes for authentication supportSascha Hauer3-3/+50
This patch adds the changes to the on disk format needed for authentication support. We'll add: * a HMAC covering super block node * a HMAC covering the master node * a hash over the root index node to the master node * a hash over the LPT to the master node * a flag to the filesystem flag indicating the filesystem is authenticated * an authentication node necessary to authenticate the nodes written to the journal heads while they are written. * a HMAC of a well known message to the super block node to be able to check if the correct key is provided And finally, not visible in this patch, nevertheless explained here: * hashes over the referenced child nodes in each branch of a index node Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Store read superblock nodeSascha Hauer3-22/+8
The superblock node is read/modified/written several times throughout the UBIFS code. Instead of reading it from the device each time just keep a copy in memory and write back the modified copy when necessary. This patch helps for authentication support, here we not only have to read the superblock node, but also have to authenticate it, which is easier if we do it once during initialization. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Drop write_nodeSascha Hauer1-34/+5
write_node() is used only once and can easily be replaced with calls to ubifs_prepare_node()/write_head() which makes the code a bit shorter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Implement ubifs_lpt_lookup using ubifs_pnode_lookupSascha Hauer1-18/+2
ubifs_lpt_lookup() starts by looking up the nth pnode in the LPT. We already have this functionality in ubifs_pnode_lookup(). Use this function rather than open coding its functionality. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Export pnode_lookup as ubifs_pnode_lookupSascha Hauer3-36/+37
ubifs_lpt_lookup could be implemented using pnode_lookup. To make that possible move pnode_lookup from lpt.c to lpt_commit.c. Rename it to ubifs_pnode_lookup since it's now exported. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Pass ubifs_zbranch to read_znode()Sascha Hauer1-5/+6
read_znode() takes len, lnum and offs arguments which the caller all extracts from the same struct ubifs_zbranch *. When adding authentication support we would have to add a pointer to a hash to the arguments which is also part of struct ubifs_zbranch. Pass the ubifs_zbranch * instead so that we do not have to add another argument. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Pass ubifs_zbranch to try_read_node()Sascha Hauer1-7/+7
try_read_node() takes len, lnum and offs arguments which the caller all extracts from the same struct ubifs_zbranch *. When adding authentication support we would have to add a pointer to a hash to the arguments which is also part of struct ubifs_zbranch. Pass the ubifs_zbranch * instead so that we do not have to add another argument. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Refactor create_default_filesystem()Sascha Hauer1-48/+47
create_default_filesystem() allocates memory for a node, writes that node and frees the memory directly afterwards. With this patch we allocate memory for all nodes at the beginning of the function and free the memory at the end. This makes it easier to implement authentication support since with authentication support we'll need the contents of some nodes when creating other nodes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-13ubifs: Fix WARN_ON logic in exit pathRichard Weinberger1-2/+2
ubifs_assert() is not WARN_ON(), so we have to invert the checks. Randy faced this warning with UBIFS being a module, since most users use UBIFS as builtin because UBIFS is the rootfs nobody noticed so far. :-( Including me. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 54169ddd382d ("ubifs: Turn two ubifs_assert() into a WARN_ON()") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Revert "ubifs: xattr: Don't operate on deleted inodes"Richard Weinberger1-24/+0
This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52. UBIFS wants to assert that xattr operations are only issued on files with positive link count. The said patch made this operations return -ENOENT for unlinked files such that the asserts will no longer trigger. This was wrong since xattr operations are perfectly fine on unlinked files. Instead the assertions need to be fixed/removed. Cc: <stable@vger.kernel.org> Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes") Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20ubifs: drop false positive assertionSascha Hauer1-1/+3
The following sequence triggers ubifs_assert(c, c->lst.taken_empty_lebs > 0); at the end of ubifs_remount_fs(): mount -t ubifs /dev/ubi0_0 /mnt echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error umount /mnt mount -t ubifs -o ro /dev/ubix_y /mnt mount -o remount,ro /mnt The resulting UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161) is a false positive. In the case above c->lst.taken_empty_lebs has never been changed from its initial zero value. This will only happen when the deferred recovery is done. Fix this by doing the assertion only when recovery has been done already. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20ubifs: Check for name being NULL while mountingRichard Weinberger1-0/+3
The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-24ubifs: Remove empty file.hRichard Weinberger1-0/+0
This empty file sneaked into the tree by mistake. Remove it. Fixes: 6eb61d587f45 ("ubifs: Pass struct ubifs_info to ubifs_assert()") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Set default assert action to read-onlyRichard Weinberger1-0/+1
Traditionally UBIFS just reported a failed assertion and moved on. The drawback is that users will notice UBIFS bugs when it is too late, most of the time when it is no longer about to mount. This makes bug hunting problematic since valuable information from failing asserts is long gone when UBIFS is dead. The other extreme, panic'ing on a failing assert is also not worthwhile, we want users and developers give a chance to collect as much debugging information as possible if UBIFS hits an assert. Therefore go for the third option, switch to read-only mode when an assert fails. That way UBIFS will not write possible bad data to the MTD and gives users the chance to collect debugging information. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Allow setting assert action as mount parameterRichard Weinberger3-0/+37
Expose our three options to userspace. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Rework ubifs_assert()Richard Weinberger3-4/+42
With having access to struct ubifs_info in ubifs_assert() we can give more information when an assert is failing. By using ubifs_err() we can tell which UBIFS instance failed. Also multiple actions can be taken now. We support: - report: This is what UBIFS did so far, just report the failure and go on. - read-only: Switch to read-only mode. - panic: shoot the kernel in the head. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Pass struct ubifs_info to ubifs_assert()Richard Weinberger31-521/+550
This allows us to have more context in ubifs_assert() and take different actions depending on the configuration. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Turn two ubifs_assert() into a WARN_ON()Richard Weinberger1-2/+2
We are going to pass struct ubifs_info to ubifs_assert() but while unloading the UBIFS module we don't have the info struct anymore. Therefore replace the asserts by a regular WARN_ON(). Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Use kmalloc_array()Richard Weinberger1-1/+1
Since commit 6da2ec56059c ("treewide: kmalloc() -> kmalloc_array()") we use kmalloc_array() for kmalloc() that computes the length with a multiplication. Cc: Kees Cook <keescook@chromium.org> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Check data node size before truncateRichard Weinberger1-1/+10
Check whether the size is within bounds before using it. If the size is not correct, abort and dump the bad data node. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15Revert "UBIFS: Fix potential integer overflow in allocation"Richard Weinberger1-3/+2
This reverts commit 353748a359f1821ee934afc579cf04572406b420. It bypassed the linux-mtd review process and fixes the issue not as it should. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Add comment on c->commit_semRichard Weinberger1-0/+1
Every single time I come across that code, I get confused because it looks like a possible dead lock. Help myself by adding a comment. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: introduce Kconfig symbol for xattr supportStefan Agner6-3/+29
Allow to disable extended attribute support. This aids in reliability testing, especially since some xattr related bugs have surfaced. Also an embedded system might not need it, so this allows for a slightly smaller kernel (about 4KiB). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: use swap macro in swap_dirty_idxGustavo A. R. Silva1-4/+1
Make use of the swap macro and remove unnecessary variable *t*. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: tnc: use monotonic znode timestampArnd Bergmann4-5/+5
The tnc uses get_seconds() based timestamps to check the age of a znode, which has two problems: on 32-bit architectures this may overflow in 2038 or 2106, and it gives incorrect information when the system time is updated using settimeofday(). Using montonic timestamps with ktime_get_seconds() solves both thes problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 20:02:13 +0000