summaryrefslogtreecommitdiffstats
path: root/fs/ubifs
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner32-416/+32
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15ubifs: Convert xattr inum to host orderRichard Weinberger1-1/+1
UBIFS stores inode numbers as LE64 integers. We have to convert them to host oder, otherwise BE hosts won't be able to use the integer correctly. Reported-by: kbuild test robot <lkp@intel.com> Fixes: 9ca2d7326444 ("ubifs: Limit number of xattrs per inode") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-15ubifs: Use correct config name for encryptionRichard Weinberger1-2/+2
CONFIG_UBIFS_FS_ENCRYPTION is gone, fscrypt is now controlled via CONFIG_FS_ENCRYPTION. This problem slipped into the tree because of a mis-merge on my side. Reported-by: Eric Biggers <ebiggers@kernel.org> Fixes: eea2c05d927b ("ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-15ubifs: Fix build error without CONFIG_UBIFS_FS_XATTRYueHaibing1-1/+5
Fix gcc build error while CONFIG_UBIFS_FS_XATTR is not set fs/ubifs/dir.o: In function `ubifs_unlink': dir.c:(.text+0x260): undefined reference to `ubifs_purge_xattrs' fs/ubifs/dir.o: In function `do_rename': dir.c:(.text+0x1edc): undefined reference to `ubifs_purge_xattrs' fs/ubifs/dir.o: In function `ubifs_rmdir': dir.c:(.text+0x2638): undefined reference to `ubifs_purge_xattrs' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 9ca2d7326444 ("ubifs: Limit number of xattrs per inode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-12Merge tag 'upstream-5.2-rc1' of ↵Linus Torvalds14-176/+332
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI/UBIFS updates from Richard Weinberger: - fscrypt framework usage updates - One huge fix for xattr unlink - Cleanup of fscrypt ifdefs - Fix for our new UBIFS auth feature * tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: wl: Fix uninitialized variable ubifs: Drop unnecessary setting of zbr->znode ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORT ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION ubifs: Limit number of xattrs per inode ubifs: orphan: Handle xattrs like files ubifs: journal: Handle xattrs like files ubifs: find.c: replace swap function with built-in one ubifs: Do not skip hash checking in data nodes ubifs: work around high stack usage with clang ubifs: remove unused function __ubifs_shash_final ubifs: remove unnecessary #ifdef around fscrypt_ioctl_get_policy() ubifs: remove unnecessary calls to set up directory key
2019-05-07Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds2-5/+6
Pull fscrypt updates from Ted Ts'o: "Clean up fscrypt's dcache revalidation support, and other miscellaneous cleanups" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: cache decrypted symlink target in ->i_link vfs: use READ_ONCE() to access ->i_link fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext fscrypt: only set dentry_operations on ciphertext dentries fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory fscrypt: fix race allowing rename() and link() of ciphertext dentries fscrypt: clean up and improve dentry revalidation fscrypt: use READ_ONCE() to access ->i_crypt_info fscrypt: remove WARN_ON_ONCE() when decryption fails fscrypt: drop inode argument from fscrypt_get_ctx()
2019-05-07ubifs: Drop unnecessary setting of zbr->znodeSascha Hauer1-1/+0
in dbg_walk_index ubifs_load_znode is used to load the znode behind a zbranch. ubifs_load_znode links the new child znode to the zbranch, so doing it again is unnecessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORTSascha Hauer4-21/+15
ifdefs reduce readability and compile coverage. This removes the ifdefs around CONFIG_UBIFS_ATIME_SUPPORT by replacing them with IS_ENABLED() where applicable. The fs layer would fall back to generic_update_time() when .update_time doesn't exist. We do this fallback explicitly now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTIONSascha Hauer3-10/+5
ifdefs reduce readablity and compile coverage. This removes the ifdefs around CONFIG_FS_ENCRYPTION by using IS_ENABLED and relying on static inline wrappers. A new static inline wrapper for setting sb->s_cop is introduced to allow filesystems to unconditionally compile in their s_cop operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: Limit number of xattrs per inodeRichard Weinberger6-8/+101
Since we have to write one deletion inode per xattr into the journal, limit the max number of xattrs. In theory UBIFS supported up to 65535 xattrs per inode. But this never worked correctly, expect no powercuts happened. Now we support only as many xattrs as we can store in 50% of a LEB. Even for tiny flashes this allows dozens of xattrs per inode, which is for an embedded filesystem still fine. In case someone has existing inodes with much more xattrs, it is still possible to delete them. UBIFS will fall back to an non-atomic deletion mode. Reported-by: Stefan Agner <stefan@agner.ch> Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: orphan: Handle xattrs like filesRichard Weinberger2-67/+144
Like for the journal case, make sure that we track all xattr inodes. Otherwise UBIFS might not be able to locate stale xattr inodes upon recovery. Reported-by: Stefan Agner <stefan@agner.ch> Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: journal: Handle xattrs like filesRichard Weinberger1-11/+49
If an inode hosts xattrs, create deletion entries for each inode. That way we can make sure that upon journal replay UBIFS can find find all xattr inodes. Otherwise it can happen that GC consumed already a LEB which contained parts of the TNC that pointed to the xattrs and we no longer find all xattr inodes, which will confuse the LPT and cause space allocation issues. Reported-by: Stefan Agner <stefan@agner.ch> Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: find.c: replace swap function with built-in oneAndrey Abramov1-8/+1
Replace swap_dirty_idx function with built-in one, because swap_dirty_idx does only a simple byte to byte swap. Since Spectre mitigations have made indirect function calls more expensive, and the default simple byte copies swap is implemented without them, an "optimized" custom swap function is now a waste of time as well as code. Signed-off-by: Andrey Abramov <st5pub@yandex.ru> Reviewed by: George Spelvin <lkml@sdf.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: Do not skip hash checking in data nodesSascha Hauer1-8/+7
UBIFS bails out early from try_read_node() when it doesn't have to check the CRC. Still the node hash has to be checked, otherwise wrong data could be sneaked into the FS. Fix this by not bailing out early and always checking the node hash. Fixes: 16a26b20d2af ("ubifs: authentication: Add hashes to index nodes") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: work around high stack usage with clangArnd Bergmann1-7/+10
Building this file with clang can result in large stack usage as seen from this warning: fs/ubifs/auth.c:78:5: error: stack frame size of 1152 bytes in function 'ubifs_prepare_auth_node' The problem is that inlining ubifs_hash_calc_hmac() leads to two SHASH_DESC_ON_STACK() blocks in the same function, and clang for some reason does not reuse the stack space as it should. Putting the first declaration into a separate basic block avoids this problem and reduces the stack allocation to 640 bytes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: remove unused function __ubifs_shash_finalYueHaibing1-18/+0
There is no callers in tree, and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: remove unnecessary #ifdef around fscrypt_ioctl_get_policy()Eric Biggers1-6/+1
When !CONFIG_FS_ENCRYPTION, fscrypt_ioctl_get_policy() is already stubbed out to return -EOPNOTSUPP, so the extra #ifdef is not needed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07ubifs: remove unnecessary calls to set up directory keyEric Biggers1-12/+0
In ubifs_unlink() and ubifs_rmdir(), remove the call to fscrypt_get_encryption_info() that precedes fscrypt_setup_filename(). This call was unnecessary, because fscrypt_setup_filename() already tries to set up the directory's encryption key. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-06Merge branch 'linus' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-01ubifs: switch to ->free_inode()Al Viro1-8/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers2-8/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-17fscrypt: cache decrypted symlink target in ->i_linkEric Biggers1-0/+3
Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertextEric Biggers1-5/+3
->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-01ubifs: fix use-after-free on symlink traversalAl Viro1-3/+1
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-13Merge tag 'upstream-5.1-rc1' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - A new interface for UBI to deal better with read disturb - Reject unsupported ioctl flags in UBIFS (xfstests found it) * tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: wl: Silence uninitialized variable warning ubifs: Reject unsupported ioctl flags explicitly ubi: Expose the bitrot interface ubi: Introduce in_pq()
2019-02-24ubifs: Reject unsupported ioctl flags explicitlyHou Tao1-0/+8
Reject unsupported ioctl flags explicitly, so the following command on a regular ubifs file will fail: chattr +d ubifs_file And xfstests generic/424 will pass. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-01-23fscrypt: remove filesystem specific build config optionChandan Rajendra6-19/+8
In order to have a common code base for fscrypt "post read" processing for all filesystems which support encryption, this commit removes filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION) and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose value affects all the filesystems making use of fscrypt. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-12-28mm: migrate: drop unused argument of migrate_page_move_mapping()Jan Kara1-1/+1
All callers of migrate_page_move_mapping() now pass NULL for 'head' argument. Drop it. Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge branch 'linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-13ubifs: Handle re-linking of inodes correctly while recoveryRichard Weinberger1-0/+37
UBIFS's recovery code strictly assumes that a deleted inode will never come back, therefore it removes all data which belongs to that inode as soon it faces an inode with link count 0 in the replay list. Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE it can lead to data loss upon a power-cut. Consider a journal with entries like: 0: inode X (nlink = 0) /* O_TMPFILE was created */ 1: data for inode X /* Someone writes to the temp file */ 2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */ 3: inode X (nlink = 1) /* inode was re-linked via linkat() */ Upon replay of entry #2 UBIFS will drop all data that belongs to inode X, this will lead to an empty file after mounting. As solution for this problem, scan the replay list for a re-link entry before dropping data. Fixes: 474b93704f32 ("ubifs: Implement O_TMPFILE") Cc: stable@vger.kernel.org Cc: Russell Senior <russell@personaltelco.net> Cc: Rafał Miłecki <zajec5@gmail.com> Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: Fix default compression selection in ubifsGabor Juhos1-1/+12
When ubifs is build without the LZO compressor and no compressor is given the creation of the default file system will fail. before selection the LZO compressor check if it is present and if not fall back to the zlib or none. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: Fix memory leak on error conditionGarry McNulty1-6/+6
If the call to ubifs_read_nnode() fails in ubifs_lpt_calc_hash() an error is returned without freeing the memory allocated to 'buf'. Read and check the root node before allocating the buffer. Detected by CoverityScan, CID 1441025 ("Resource leak") Signed-off-by: Garry McNulty <garrmcnu@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: auth: Add CONFIG_KEYS dependencyArnd Bergmann1-0/+1
The new authentication support causes a build failure when CONFIG_KEYS is disabled, so add a dependency. fs/ubifs/auth.c: In function 'ubifs_init_authentication': fs/ubifs/auth.c:249:16: error: implicit declaration of function 'request_key'; did you mean 'request_irq'? [-Werror=implicit-function-declaration] keyring_key = request_key(&key_type_logon, c->auth_key_name, NULL); Fixes: d8a22773a12c ("ubifs: Enable authentication support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: CONFIG_UBIFS_FS_AUTHENTICATION should depend on UBIFS_FSGeert Uytterhoeven1-8/+7
Instead of adding yet another dependency on UBIFS_FS, wrap the whole block of ubifs config options in a single "if UBIFS_FS". Fixes: d8a22773a12c6d78 ("ubifs: Enable authentication support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-13ubifs: replay: Fix high stack usageArnd Bergmann1-11/+24
Having two shash descriptors on the stack cause a very significant kernel stack usage that can cross the warning threshold: fs/ubifs/replay.c: In function 'authenticate_sleb': fs/ubifs/replay.c:633:1: error: the frame size of 1144 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Normally, gcc optimizes the out, but with CONFIG_CC_OPTIMIZE_FOR_DEBUGGING, it does not. Splitting the two stack allocations into separate functions means that they will use the same memory again. In normal configurations (optimizing for size or performance), those should get inlined and we get the same behavior as before. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'shash' tfm allocationsEric Biggers1-3/+2
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_shash() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-23ubifs: Remove unneeded semicolonDing Xiang1-1/+1
delete redundant semicolon Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Enable authentication supportSascha Hauer2-1/+45
With the preparations all being done this patch now enables authentication support for UBIFS. Authentication is enabled when the newly introduced auth_key and auth_hash_name mount options are passed. auth_key provides the key which is used for authentication whereas auth_hash_name provides the hashing algorithm used for this FS. Passing these options make authentication mandatory and only UBIFS images that can be authenticated with the given key are allowed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Do not update inode size in-place in authenticated modeSascha Hauer3-38/+113
In authenticated mode we cannot fixup the inode sizes in-place during recovery as this would invalidate the hashes and HMACs we stored for this inode. Instead, we just write the updated inodes to the journal. We can only do this after ubifs_rcvry_gc_commit() is done though, so for authenticated mode call ubifs_recover_size() after ubifs_rcvry_gc_commit() and not vice versa as normally done. Calling ubifs_recover_size() after ubifs_rcvry_gc_commit() has the drawback that after a commit the size fixup information is gone, so when a powercut happens while recovering from another powercut we may lose some data written right before the first powercut. This is why we only do this in authenticated mode and leave the behaviour for unauthenticated mode untouched. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add hashes and HMACs to default filesystemSascha Hauer1-7/+27
This patch calculates the necessary hashes and HMACs for the default filesystem so that the dynamically created default fs can be authenticated. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Authenticate super block nodeSascha Hauer1-1/+69
This adds a HMAC covering the super block node and adds the logic that decides if a filesystem shall be mounted unauthenticated or authenticated. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Create hash for default LPTSascha Hauer3-3/+23
During creation of the default filesystem on an empty flash the default LPT is created. With this patch a hash over the default LPT is calculated which can be added to the default filesystems master node. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubfis: authentication: Authenticate master nodeSascha Hauer3-10/+61
The master node contains hashes over the root index node and the LPT. This patch adds a HMAC to authenticate the master node itself. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Authenticate LPTSascha Hauer3-0/+134
The LPT needs to be authenticated aswell. Since the LPT is only written during commit it is enough to authenticate the whole LPT with a single hash which is stored in the master node. Only the leaf nodes (pnodes) are hashed which makes the implementation much simpler than it would be to hash the complete LPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Authenticate replayed journalSascha Hauer1-2/+144
Make sure that during replay all buds can be authenticated. To do this we calculate the hash chain until we find an authentication node and check the HMAC in that node against the current status of the hash chain. After a power cut it can happen that some nodes have been written, but not yet the authentication node for them. These nodes have to be discarded during replay. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add auth nodes to garbage collector journal headSascha Hauer1-3/+43
To be able to authenticate the garbage collector journal head add authentication nodes to the buds the garbage collector creates. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: Add authentication nodes to journalSascha Hauer6-18/+153
Nodes that are written to flash can only be authenticated through the index after the next commit. When a journal replay is necessary the nodes are not yet referenced by the index and thus can't be authenticated. This patch overcomes this situation by creating a hash over all nodes beginning from the commit start node over the reference node(s) and the buds themselves. From time to time we insert authentication nodes. Authentication nodes contain a HMAC from the current hash state, so that they can be used to authenticate a journal replay up to the point where the authentication node is. The hash is continued afterwards so that theoretically we would only have to check the HMAC of the last authentication node we find. Overall we get this picture: ,,,,,,,, ,......,........................................... ,. CS , hash1.----. hash2.----. ,. | , . |hmac . |hmac ,. v , . v . v ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... ,..|...,........................................... , | , , | ,,,,,,,,,,,,,,, . | hash3,----. , | , |hmac , v , v , REF#1 -> bud -> bud,-> auth ... ,,,|,,,,,,,,,,,,,,,,,, v REF#2 -> ... | V ... Note how hash3 covers CS, REF#0 and REF#1 so that it is not possible to exchange or skip any reference nodes. Unlike the picture suggests the auth nodes themselves are not hashed. With this it is possible for an offline attacker to cut each journal head or to drop the last reference node(s), but not to skip any journal heads or to reorder any operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23ubifs: authentication: Add hashes to index nodesSascha Hauer7-14/+81
With this patch the hashes over the index nodes stored in the tree node cache are written to flash and are checked when read back from flash. The hash of the root index node is stored in the master node. During journal replay the hashes are regenerated from the read nodes and stored in the tree node cache. This means the nodes must previously be authenticated by other means. This is done in a later patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 03:01:39 +0000