summaryrefslogtreecommitdiffstats
path: root/fs/ubifs
AgeCommit message (Collapse)AuthorFilesLines
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds3-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-3/+6
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook4-12/+17
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12UBIFS: Fix potential integer overflow in allocationSilvio Cesare1-2/+3
There is potential for the size and len fields in ubifs_data_node to be too large causing either a negative value for the length fields or an integer overflow leading to an incorrect memory allocation. Likewise, when the len field is small, an integer underflow may occur. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds8-22/+13
Pull UBI and UBIFS updates from Richard Weinberger: - the UBI on-disk format header file is now dual licensed - new way to detect Fastmap problems during runtime - bugfix for Fastmap - minor updates for UBIFS (spelling, comments, vm_fault_t, ...) * tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs: mtd: ubi: Update ubi-media.h to dual license ubi: fastmap: Detect EBA mismatches on-the-fly ubi: fastmap: Check each mapping only once ubi: fastmap: Correctly handle interrupted erasures in EBA ubi: fastmap: Cancel work upon detach ubifs: lpt: Fix wrong pnode number range in comment ubifs: gc: Fix typo ubifs: log: Some spelling fixes ubifs: Spelling fix someting -> something ubifs: journal: Remove wrong comment ubifs: remove set but never used variable ubifs, xattr: remove misguided quota flags fs: ubifs: Adding new return type vm_fault_t
2018-06-07ubifs: lpt: Fix wrong pnode number range in commentSascha Hauer1-1/+1
The comment above pnode_lookup claims the range for the pnode number is from 0 to main_lebs - 1. This is wrong because every pnode has informations about UBIFS_LPT_FANOUT LEBs, thus the corrent range is 0 to to (main_lebs - 1) / UBIFS_LPT_FANOUT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: gc: Fix typoSascha Hauer1-1/+1
"point of view" makes more sense than "point of few". Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: log: Some spelling fixesSascha Hauer1-3/+3
- add missing article - remove misplaced 'it' - s/tress/trees Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: Spelling fix someting -> somethingSascha Hauer1-1/+1
Replace "someting" with "something" Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: journal: Remove wrong commentSascha Hauer1-3/+2
In the description of reserve_space() it is claimed that write_node() and write_head() unlock the journal head. This is not true and has never been true. All callers of write_node() and write_head() call release_head() themselves. Remove the wrong comment. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: remove set but never used variableSascha Hauer2-5/+0
replay_sqnum is set but never used. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs, xattr: remove misguided quota flagsWang Shilong1-1/+1
Originally, Yang Dongsheng added quota support for ubifs, but it turned out upstream won't accept it. Since ubifs don't touch any quota code, S_NOQUOTA flag is misguided here, and currently it is mainly used to avoid recursion for system quota files. Let's make things clearly and remove unnecessary and misguied quota flags here. Reported-by: Rock Lee <rockdotlee@gmail.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07fs: ubifs: Adding new return type vm_fault_tSouptick Joarder1-7/+4
Use new return type vm_fault_t for page_mkwrite handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani3-14/+15
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-05Merge tag 'fscrypt_for_linus' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Add bunch of cleanups, and add support for the Speck128/256 algorithms. Yes, Speck is contrversial, but the intention is to use them only for the lowest end Android devices, where the alternative *really* is no encryption at all for data stored at rest" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: log the crypto algorithm implementations fscrypt: add Speck128/256 support fscrypt: only derive the needed portion of the key fscrypt: separate key lookup from key derivation fscrypt: use a common logging function fscrypt: remove internal key size constants fscrypt: remove unnecessary check for non-logon key type fscrypt: make fscrypt_operations.max_namelen an integer fscrypt: drop empty name check from fname_decrypt() fscrypt: drop max_namelen check from fname_decrypt() fscrypt: don't special-case EOPNOTSUPP from fscrypt_get_encryption_info() fscrypt: don't clear flags on crypto transform fscrypt: remove stale comment from fscrypt_d_revalidate() fscrypt: remove error messages for skcipher_request_alloc() failure fscrypt: remove unnecessary NULL check when allocating skcipher fscrypt: clean up after fscrypt_prepare_lookup() conversions fs, fscrypt: only define ->s_cop when FS_ENCRYPTION is enabled fscrypt: use unbound workqueue for decryption
2018-05-22ubifs_lookup: use d_splice_alias()Al Viro1-28/+15
code is simpler that way Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-20fscrypt: make fscrypt_operations.max_namelen an integerEric Biggers1-9/+1
Now ->max_namelen() is only called to limit the filename length when adding NUL padding, and only for real filenames -- not symlink targets. It also didn't give the correct length for symlink targets anyway since it forgot to subtract 'sizeof(struct fscrypt_symlink_data)'. Thus, change ->max_namelen from a function to a simple 'unsigned int' that gives the filesystem's maximum filename length. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-04-11Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-9/+12
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
2018-04-04ubifs: Remove useless parameter of lpt_heap_replaceJiang Biao1-3/+1
The parameter *old_lprops* is never used in lpt_heap_replace(), remove it to avoid compile warning. Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idxJiang Biao1-1/+1
Constify struct ubifs_lprops in scan_for_leb_for_idx to be consistent with other references. Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04ubifs: remove unnecessary assignmentStefan Agner1-1/+0
Assigning a value of a variable to itself is not useful. This fixes a warning shown when using clang: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04ubifs: Check ubifs_wbuf_sync() return codeRichard Weinberger1-4/+10
If ubifs_wbuf_sync() fails we must not write a master node with the dirty marker cleared. Otherwise it is possible that in case of an IO error while syncing we mark the filesystem as clean and UBIFS refuses to recover upon next mount. Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-03-28ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) callChristoph Hellwig1-1/+1
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as in mark dirty to be written out by fdatasync as well. So dirtying for both flags makes no sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-04Merge tag 'fscrypt_for_linus' of ↵Linus Torvalds3-85/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Refactor support for encrypted symlinks to move common code to fscrypt" Ted also points out about the merge: "This makes the f2fs symlink code use the fscrypt_encrypt_symlink() from the fscrypt tree. This will end up dropping the kzalloc() -> f2fs_kzalloc() change, which means the fscrypt-specific allocation won't get tested by f2fs's kmalloc error injection system; which is fine" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits) fscrypt: fix build with pre-4.6 gcc versions fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info() fscrypt: document symlink length restriction fscrypt: fix up fscrypt_fname_encrypted_size() for internal use fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names fscrypt: calculate NUL-padding length in one place only fscrypt: move fscrypt_symlink_data to fscrypt_private.h fscrypt: remove fscrypt_fname_usr_to_disk() ubifs: switch to fscrypt_get_symlink() ubifs: switch to fscrypt ->symlink() helper functions ubifs: free the encrypted symlink target f2fs: switch to fscrypt_get_symlink() f2fs: switch to fscrypt ->symlink() helper functions ext4: switch to fscrypt_get_symlink() ext4: switch to fscrypt ->symlink() helper functions fscrypt: new helper function - fscrypt_get_symlink() fscrypt: new helper functions for ->symlink() fscrypt: trim down fscrypt.h includes fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h ...
2018-01-18ubifs: remove error message in ubifs_xattr_getRock Lee1-2/+0
There is a situation that other modules, like overlayfs, try to get xattr value with a small buffer, if they get -ERANGE, they will try again with the proper buffer size. No need to report an error. Signed-off-by: Rock Lee <rli@sierrawireless.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: switch to fscrypt_prepare_setattr()Eric Biggers1-7/+3
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: switch to fscrypt_prepare_lookup()Eric Biggers1-14/+3
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: switch to fscrypt_prepare_rename()Eric Biggers1-13/+7
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: switch to fscrypt_prepare_link()Eric Biggers1-3/+3
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: switch to fscrypt_file_open()Eric Biggers1-30/+1
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubifs: Fix uninitialized variable in search_dh_cookie()Geert Uytterhoeven1-14/+7
fs/ubifs/tnc.c: In function ‘search_dh_cookie’: fs/ubifs/tnc.c:1893: warning: ‘err’ is used uninitialized in this function Indeed, err is always used uninitialized. According to an original review comment from Hyunchul, acknowledged by Richard, err should be initialized to -ENOENT to avoid the first call to tnc_next(). But we can achieve the same by reordering the code. Fixes: 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups") Reported-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-11fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()Eric Biggers1-3/+1
fscrypt_put_encryption_info() is only called when evicting an inode, so the 'struct fscrypt_info *ci' parameter is always NULL, and there cannot be races with other threads. This was cruft left over from the broken key revocation code. Remove the unused parameter and the cmpxchg(). Also remove the #ifdefs around the fscrypt_put_encryption_info() calls, since fscrypt_notsupp.h defines a no-op stub for it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-11ubifs: switch to fscrypt_get_symlink()Eric Biggers1-34/+2
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-11ubifs: switch to fscrypt ->symlink() helper functionsEric Biggers1-43/+12
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-11ubifs: free the encrypted symlink targetEric Biggers1-6/+4
ubifs_symlink() forgot to free the kmalloc()'ed buffer holding the encrypted symlink target, creating a memory leak. Fix it. (UBIFS could actually encrypt directly into ui->data, removing the temporary buffer, but that is left for the patch that switches to use the symlink helper functions.) Fixes: ca7f85be8d6c ("ubifs: Add support for encrypted symlinks") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds4-14/+14
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14Merge tag 'fscrypt-for-linus' of ↵Linus Torvalds5-20/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Lots of cleanups, mostly courtesy by Eric Biggers" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: lock mutex before checking for bounce page pool fscrypt: add a documentation file for filesystem-level encryption ext4: switch to fscrypt_prepare_setattr() ext4: switch to fscrypt_prepare_lookup() ext4: switch to fscrypt_prepare_rename() ext4: switch to fscrypt_prepare_link() ext4: switch to fscrypt_file_open() fscrypt: new helper function - fscrypt_prepare_setattr() fscrypt: new helper function - fscrypt_prepare_lookup() fscrypt: new helper function - fscrypt_prepare_rename() fscrypt: new helper function - fscrypt_prepare_link() fscrypt: new helper function - fscrypt_file_open() fscrypt: new helper function - fscrypt_require_key() fscrypt: remove unneeded empty fscrypt_operations structs fscrypt: remove ->is_encrypted() fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED() fs, fscrypt: add an S_ENCRYPTED inode flag fscrypt: clean up include file mess
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18fscrypt: remove unneeded empty fscrypt_operations structsEric Biggers1-5/+2
In the case where a filesystem has been configured without encryption support, there is no longer any need to initialize ->s_cop at all, since none of the methods are ever called. Reviewed-by: Chao Yu <yuchao0@huawei.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18fscrypt: remove ->is_encrypted()Eric Biggers3-9/+2
Now that all callers of fscrypt_operations.is_encrypted() have been switched to IS_ENCRYPTED(), remove ->is_encrypted(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18fs, fscrypt: add an S_ENCRYPTED inode flagEric Biggers2-1/+5
Introduce a flag S_ENCRYPTED which can be set in ->i_flags to indicate that the inode is encrypted using the fscrypt (fs/crypto/) mechanism. Checking this flag will give the same information that inode->i_sb->s_cop->is_encrypted(inode) currently does, but will be more efficient. This will be useful for adding higher-level helper functions for filesystems to use. For example we'll be able to replace this: if (ext4_encrypted_inode(inode)) { ret = fscrypt_get_encryption_info(inode); if (ret) return ret; if (!fscrypt_has_encryption_key(inode)) return -ENOKEY; } with this: ret = fscrypt_require_key(inode); if (ret) return ret; ... since we'll be able to retain the fast path for unencrypted files as a single flag check, using an inline function. This wasn't possible before because we'd have had to frequently call through the ->i_sb->s_cop->is_encrypted function pointer, even when the encryption support was disabled or not being used. Note: we don't define S_ENCRYPTED to 0 if CONFIG_FS_ENCRYPTION is disabled because we want to continue to return an error if an encrypted file is accessed without encryption support, rather than pretending that it is unencrypted. Reviewed-by: Chao Yu <yuchao0@huawei.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18fscrypt: clean up include file messDave Chinner1-5/+4
Filesystems have to include different header files based on whether they are compiled with encryption support or not. That's nasty and messy. Instead, rationalise the headers so we have a single include fscrypt.h and let it decide what internal implementation to include based on the __FS_HAS_ENCRYPTION define. Filesystems set __FS_HAS_ENCRYPTION to 1 before including linux/fscrypt.h if they are built with encryption support. Otherwise, they must set __FS_HAS_ENCRYPTION to 0. Add guards to prevent fscrypt_supp.h and fscrypt_notsupp.h from being directly included by filesystems. Signed-off-by: Dave Chinner <dchinner@redhat.com> [EB: use 1 and 0 rather than defined/undefined] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-08mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPYJérôme Glisse1-1/+4
Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-01fs: convert a pile of fsync routines to errseq_t based reportingJeff Layton1-1/+1
This patch converts most of the in-kernel filesystems that do writeback out of the pagecache to report errors using the errseq_t-based infrastructure that was recently added. This allows them to report errors once for each open file description. Most filesystems have a fairly straightforward fsync operation. They call filemap_write_and_wait_range to write back all of the data and wait on it, and then (sometimes) sync out the metadata. For those filesystems this is a straightforward conversion from calling filemap_write_and_wait_range in their fsync operation to calling file_write_and_wait_range. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-14ubifs: Set double hash cookie also for RENAME_EXCHANGERichard Weinberger1-0/+2
We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in parallel and this case was forgotten. :-( Cc: stable@vger.kernel.org Fixes: d63d61c16972 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH") Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrsXiaolei Li3-11/+15
The inode is not locked in init_xattrs when creating a new inode. Without this patch, there will occurs assert when booting or creating a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled. Log likes: UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156) CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2 Hardware name: MediaTek MT2712 evaluation board (DT) Call trace: [<ffff000008088538>] dump_backtrace+0x0/0x238 [<ffff000008088834>] show_stack+0x14/0x20 [<ffff0000083d98d4>] dump_stack+0x9c/0xc0 [<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0 [<ffff00000835d7ec>] init_xattrs+0x5c/0xb8 [<ffff000008385788>] security_inode_init_security+0x110/0x190 [<ffff00000835e058>] ubifs_init_security+0x30/0x68 [<ffff00000833ada0>] ubifs_mkdir+0x100/0x200 [<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8 [<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0 [<ffff000008082f8c>] __sys_trace_return+0x0/0x4 Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Don't leak kernel memory to the MTDRichard Weinberger1-5/+5
When UBIFS prepares data structures which will be written to the MTD it ensues that their lengths are multiple of 8. Since it uses kmalloc() the padded bytes are left uninitialized and we leak a few bytes of kernel memory to the MTD. To make sure that all bytes are initialized, let's switch to kzalloc(). Kzalloc() is fine in this case because the buffers are not huge and in the IO path the performance bottleneck is anyway the MTD. Cc: stable@vger.kernel.org Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Change gfp flags in page allocation for bulk readHyunchul Lee1-2/+2
In low memory situations, page allocations for bulk read can kill applications for reclaiming memory, and print an failure message when allocations are failed. Because bulk read is just an optimization, we don't have to do these and can stop page allocations. Though this siutation happens rarely, add __GFP_NORETRY to prevent from excessive memory reclaim and killing applications, and __GFP_WARN to suppress this failure message. For this, Use readahead_gfp_mask for gfp flags when allocating pages. Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 01:40:46 +0000