summaryrefslogtreecommitdiffstats
path: root/fs/reiserfs/journal.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie1-4/+4
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie1-3/+3
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov1-1/+1
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-06fs: use block_device name vsprintf helperDmitry Monakhov1-14/+10
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-20treewide: fix typo in printk and KconfigMasanari Iida1-1/+1
This patch fix spelling typo in printk and Kconfig within various part of kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-14fs/reiserfs/journal.c: fix sparse context imbalance warningFabian Frederick1-3/+5
Merge conditional unlock/lock in the same condition to avoid sparse warning: fs/reiserfs/journal.c:703:36: warning: context imbalance in 'add_to_chunk' - unexpected unlock Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-12reiserfs: Fix use after free in journal teardownJan Kara1-6/+16
If do_journal_release() races with do_journal_end() which requeues delayed works for transaction flushing, we can leave work items for flushing outstanding transactions queued while freeing them. That results in use after free and possible crash in run_timers_softirq(). Fix the problem by not requeueing works if superblock is being shut down (MS_ACTIVE not set) and using cancel_delayed_work_sync() in do_journal_release(). CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove unnecessary parensJeff Mahoney1-37/+36
The reiserfs code is littered with extra parens in places where the authors may not have been certain about precedence of & vs ->. This patch cleans them out. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove leading whitespace from labelsJeff Mahoney1-18/+18
This patch moves reiserfs closer to adhering to the style rules by removing leading whitespace from labels. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove blocks arg from journal_joinJeff Mahoney1-9/+9
journal_join is always called with a block count of 1. Let's just get rid of the argument. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove sb argument from journal_mark_dirtyJeff Mahoney1-10/+8
journal_mark_dirty doesn't need a separate sb argument; It's provided by the transaction handle. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove sb argument from journal_endJeff Mahoney1-21/+22
journal_end doesn't need a separate sb argument; it's provided by the transaction handle. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, remove nblocks argument from journal_endJeff Mahoney1-21/+17
journal_end takes a block count argument but doesn't actually use it for anything. We can remove it. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: cleanup, reformat comments to normal kernel styleJeff Mahoney1-469/+658
This patch reformats comments in the reiserfs code to fit in 80 columns and to follow the style rules. There is no functional change but it helps make my eyes bleed less. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06reiserfs: use per-fs commit workqueuesJeff Mahoney1-19/+3
The reiserfs write lock hasn't been the BKL for some time. There's no need to have different file systems queued up on the same workqueue. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-09-24reiserfs: fix race with flush_used_journal_lists and flush_journal_listJeff Mahoney1-1/+4
There are two locks involved in managing the journal lists. The general reiserfs_write_lock and the journal->j_flush_mutex. While flush_journal_list is sleeping to acquire the j_flush_mutex or to submit a block for write, it will drop the write lock. This allows another thread to acquire the write lock and ultimately call flush_used_journal_lists to traverse the list of journal lists and select one for flushing. It can select the journal_list that has just had flush_journal_list called on it in the original thread and call it again with the same journal_list. The second thread then drops the write lock to acquire j_flush_mutex and the first thread reacquires it and continues execution and eventually clears and frees the journal list before dropping j_flush_mutex and returning. The second thread acquires j_flush_mutex and ends up operating on a journal_list that has already been released. If the memory hasn't been reused, we'll soon after hit a BUG_ON because the transaction id has already been cleared. If it's been reused, we'll crash in other fun ways. Since flush_journal_list will synchronize on j_flush_mutex, we can fix the race by taking a proper reference in flush_used_journal_lists and checking to see if it's still valid after the mutex is taken. It's safe to iterate the list of journal lists and pick a list with just the write lock as long as a reference is taken on the journal list before we drop the lock. We already have code to handle whether a transaction has been flushed already so we can use that to handle the race and get rid of the trans_id BUG_ON. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-09-24reiserfs: remove useless flush_old_journal_listsJeff Mahoney1-62/+0
Commit a3172027 introduced test_transaction as a requirement for flushing old lists -- but it can never return 1 unless the transaction has already been flushed. As a result, we have a routine that iterates the j_realblocks list but doesn't actually do anything. Since it's been this way since 2006 and the latency numbers were what Chris expected, let's just rip it out. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-08-08reiserfs: locking, handle nested locks properlyJeff Mahoney1-48/+56
The reiserfs write lock replaced the BKL and uses similar semantics. Frederic's locking code makes a distinction between when the lock is nested and when it's being acquired/released, but I don't think that's the right distinction to make. The right distinction is between the lock being released at end-of-use and the lock being released for a schedule. The unlock should return the depth and the lock should restore it, rather than the other way around as it is now. This patch implements that and adds a number of places where the lock should be dropped. Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2013-05-07make blkdev_put() return voidAl Viro1-13/+3
same story as with the previous patches - note that return value of blkdev_close() is lost, since there's nowhere the caller (__fput()) could return it to. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: get rid of resierfs_sync_superArtem Bityutskiy1-2/+4
This patch stops reiserfs using the VFS 'write_super()' method along with the s_dirt flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblock using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: mark the superblock as dirty a bit laterArtem Bityutskiy1-2/+1
The 'journal_mark_dirty()' function currently first marks the superblock as dirty by setting 's_dirt' to 1, then does various sanity checks and returns, then actuall does all the magic with the journal. This is not an ideal order, though. It makes more sense to first do all the checks, then do all the internal stuff, and at the end notify the VFS that the superblock is now dirty. This patch moves the 's_dirt = 1' assignment from the very beginning of this function to the very end. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: clean-up function return typeArtem Bityutskiy1-5/+3
Turn 'reiserfs_flush_old_commits()' into a void function because the callers do not cares about what it returns anyway. We are going to remove the 'sb->s_dirt' field completely and this patch is a small step towards this direction. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-20move private bits of reiserfs_fs.h to fs/reiserfs/reiserfs.hAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-10reiserfs: don't lock journal_init()Frederic Weisbecker1-33/+20
journal_init() doesn't need the lock since no operation on the filesystem is involved there. journal_read() and get_list_bitmap() have yet to be reviewed carefully though before removing the lock there. Just keep the it around these two calls for safety. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10reiserfs: delete comments referring to the BKLDavidlohr Bueso1-7/+4
Signed-off-by: Davidlohr Bueso <dave@gnu.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15fs: Convert vmalloc/memset to vzallocJoe Perches1-6/+3
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alex Elder <aelder@sgi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-12fixlet: Remove fs_excl from struct task.Justin TerAvest1-13/+0
fs_excl is a poor man's priority inheritance for filesystems to hint to the block layer that an operation is important. It was never clearly specified, not widely adopted, and will not prevent starvation in many cases (like across cgroups). fs_excl was introduced with the time sliced CFQ IO scheduler, to indicate when a process held FS exclusive resources and thus needed a boost. It doesn't cover all file systems, and it was never fully complete. Lets kill it. Signed-off-by: Justin TerAvest <teravest@google.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-01reiserfs: make commit_wq use the default concurrency levelTejun Heo1-1/+1
The maximum number of concurrent work items queued on commit_wq is bound by the number of active journals. Convert to alloc_workqueue() and use the default concurrency level so that they can be processed in parallel. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: reiserfs-devel@vger.kernel.org
2011-01-13Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-14/+7
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits) block: ensure that completion error gets properly traced blktrace: add missing probe argument to block_bio_complete block cfq: don't use atomic_t for cfq_group block cfq: don't use atomic_t for cfq_queue block: trace event block fix unassigned field block: add internal hd part table references block: fix accounting bug on cross partition merges kref: add kref_test_and_get bio-integrity: mark kintegrityd_wq highpri and CPU intensive block: make kblockd_workqueue smarter Revert "sd: implement sd_check_events()" block: Clean up exit_io_context() source code. Fix compile warnings due to missing removal of a 'ret' variable fs/block: type signature of major_to_index(int) to major_to_index(unsigned) block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p) cfq-iosched: don't check cfqg in choose_service_tree() fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors cdrom: export cdrom_check_events() sd: implement sd_check_events() sr: implement sr_check_events() ...
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-13block: clean up blkdev_get() wrappers and their usersTejun Heo1-3/+3
After recent blkdev_get() modifications, open_by_devnum() and open_bdev_exclusive() are simple wrappers around blkdev_get(). Replace them with blkdev_get_by_dev() and blkdev_get_by_path(). blkdev_get_by_dev() is identical to open_by_devnum(). blkdev_get_by_path() is slightly different in that it doesn't automatically add %FMODE_EXCL to @mode. All users are converted. Most conversions are mechanical and don't introduce any behavior difference. There are several exceptions. * btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no reason to OR it explicitly on blkdev_put(). * gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in sb->s_mode. * With the above changes, sb->s_mode now always should contain FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect errors. The new blkdev_get_*() functions are with proper docbook comments. While at it, add function description to blkdev_get() too. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: reiserfs-devel@vger.kernel.org Cc: xfs-masters@oss.sgi.com Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13block: make blkdev_get/put() handle exclusive accessTejun Heo1-12/+5
Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Brown <neilb@suse.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Philipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-09-10reiserfs: replace barriers with explicit flush / FUA usageChristoph Hellwig1-86/+20
Switch to the WRITE_FLUSH_FUA flag for log writes and remove the EOPNOTSUPP detection for barriers. Note that reiserfs had a fairly different code path for barriers before as it wa the only filesystem actually making use of them. The new code always uses the old non-barrier codepath and just sets the WRITE_FLUSH_FUA explicitly for the journal commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-18remove SWRITE* I/O typesChristoph Hellwig1-1/+1
These flags aren't real I/O types, but tell ll_rw_block to always lock the buffer instead of giving up on a failed trylock. Instead add a new write_dirty_buffer helper that implements this semantic and use it from the existing SWRITE* callers. Note that the ll_rw_block code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which this patch fixes. In the ufs code clean up the helper that used to call ll_rw_block to mirror sync_dirty_buffer, which is the function it implements for compound buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11reiserfs: remove unused local `wait'Changli Gao1-1/+0
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24reiserfs: properly honor read-only devicesJeff Mahoney1-6/+9
The reiserfs journal behaves inconsistently when determining whether to allow a mount of a read-only device. This is due to the use of the continue_replay variable to short circuit the journal scanning. If it's set, it's assumed that there are transactions to replay, but there may not be. If it's unset, it's assumed that there aren't any, and that may not be the case either. I've observed two failure cases: 1) Where a clean file system on a read-only device refuses to mount 2) Where a clean file system on a read-only device passes the optimization and then tries writing the journal header to update the latest mount id. The former is easily observable by using a freshly created file system on a read-only loopback device. This patch moves the check into journal_read_transaction, where it can bail out before it's about to replay a transaction. That way it can go through and skip transactions where appropriate, yet still refuse to mount a file system with outstanding transactions. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-28reiserfs: Fix vmalloc call under reiserfs lockFrederic Weisbecker1-0/+2
Vmalloc is called to allocate journal->j_cnode_free_list but we hold the reiserfs lock at this time, which raises a {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion. Just drop the reiserfs lock at this time, as it's not even needed but kept for paranoid reasons. This fixes: [ INFO: inconsistent lock state ] 2.6.33-rc5 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes: (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c11118c8>] reiserfs_write_lock_once+0x28/0x50 {RECLAIM_FS-ON-W} state was registered at: [<c104ee32>] mark_held_locks+0x62/0x90 [<c104eefa>] lockdep_trace_alloc+0x9a/0xc0 [<c108f7b6>] kmem_cache_alloc+0x26/0xf0 [<c108621c>] __get_vm_area_node+0x6c/0xf0 [<c108690e>] __vmalloc_node+0x7e/0xa0 [<c1086aab>] vmalloc+0x2b/0x30 [<c110e1fb>] journal_init+0x6cb/0xa10 [<c10f90a2>] reiserfs_fill_super+0x342/0xb80 [<c1095665>] get_sb_bdev+0x145/0x180 [<c10f68e1>] get_super_block+0x21/0x30 [<c1094520>] vfs_kern_mount+0x40/0xd0 [<c1094609>] do_kern_mount+0x39/0xd0 [<c10aaa97>] do_mount+0x2c7/0x6d0 [<c10aaf06>] sys_mount+0x66/0xa0 [<c16198a7>] mount_block_root+0xc4/0x245 [<c1619a81>] mount_root+0x59/0x5f [<c1619b98>] prepare_namespace+0x111/0x14b [<c1619269>] kernel_init+0xcf/0xdb [<c100303a>] kernel_thread_helper+0x6/0x1c irq event stamp: 63236801 hardirqs last enabled at (63236801): [<c134e7fa>] __mutex_unlock_slowpath+0x9a/0x120 hardirqs last disabled at (63236800): [<c134e799>] __mutex_unlock_slowpath+0x39/0x120 softirqs last enabled at (63218800): [<c102f451>] __do_softirq+0xc1/0x110 softirqs last disabled at (63218789): [<c102f4ed>] do_softirq+0x4d/0x60 other info that might help us debug this: 2 locks held by kswapd0/313: #0: (shrinker_rwsem){++++..}, at: [<c1074bb4>] shrink_slab+0x24/0x170 #1: (&type->s_umount_key#19){++++..}, at: [<c10a2edd>] shrink_dcache_memory+0xfd/0x1a0 stack backtrace: Pid: 313, comm: kswapd0 Not tainted 2.6.33-rc5 #1 Call Trace: [<c134db2c>] ? printk+0x18/0x1c [<c104e7ef>] print_usage_bug+0x15f/0x1a0 [<c104ebcf>] mark_lock+0x39f/0x5a0 [<c104d66b>] ? trace_hardirqs_off+0xb/0x10 [<c1052c50>] ? check_usage_forwards+0x0/0xf0 [<c1050c24>] __lock_acquire+0x214/0xa70 [<c10438c5>] ? sched_clock_cpu+0x95/0x110 [<c10514fa>] lock_acquire+0x7a/0xa0 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c134f03f>] mutex_lock_nested+0x5f/0x2b0 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c11118c8>] reiserfs_write_lock_once+0x28/0x50 [<c10f05b0>] reiserfs_delete_inode+0x50/0x140 [<c10a653f>] ? generic_delete_inode+0x5f/0x150 [<c10f0560>] ? reiserfs_delete_inode+0x0/0x140 [<c10a657c>] generic_delete_inode+0x9c/0x150 [<c10a666d>] generic_drop_inode+0x3d/0x60 [<c10a5597>] iput+0x47/0x50 [<c10a2a4f>] dentry_iput+0x6f/0xf0 [<c10a2af4>] d_kill+0x24/0x50 [<c10a2d3d>] __shrink_dcache_sb+0x21d/0x2b0 [<c10a2f0f>] shrink_dcache_memory+0x12f/0x1a0 [<c1074c9e>] shrink_slab+0x10e/0x170 [<c1075177>] kswapd+0x477/0x6a0 [<c1072d10>] ? isolate_pages_global+0x0/0x1b0 [<c103e160>] ? autoremove_wake_function+0x0/0x40 [<c1074d00>] ? kswapd+0x0/0x6a0 [<c103de6c>] kthread+0x6c/0x80 [<c103de00>] ? kthread+0x0/0x80 [<c100303a>] kernel_thread_helper+0x6/0x1c Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Chris Mason <chris.mason@oracle.com>
2010-01-02reiserfs: Relax reiserfs lock while freeing the journalFrederic Weisbecker1-1/+2
Keeping the reiserfs lock while freeing the journal on umount path triggers a lock inversion between bdev->bd_mutex and the reiserfs lock. We don't need the reiserfs lock at this stage. The filesystem is not usable anymore, and there are no more pending commits, everything got flushed (even this operation was done in parallel and didn't required the reiserfs lock from the current process). This fixes the following lockdep report: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #172 ------------------------------------------------------- umount/3904 is trying to acquire lock: (&bdev->bd_mutex){+.+.+.}, at: [<c10de2c2>] __blkdev_put+0x22/0x160 but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c1143279>] reiserfs_write_lock+0x29/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&REISERFS_SB(s)->lock){+.+.+.}: [<c105ea7f>] __lock_acquire+0x11ff/0x19e0 [<c105f2c8>] lock_acquire+0x68/0x90 [<c140199b>] mutex_lock_nested+0x5b/0x340 [<c1143229>] reiserfs_write_lock_once+0x29/0x50 [<c111c485>] reiserfs_get_block+0x85/0x1620 [<c10e1040>] do_mpage_readpage+0x1f0/0x6d0 [<c10e1640>] mpage_readpages+0xc0/0x100 [<c1119b89>] reiserfs_readpages+0x19/0x20 [<c108f1ec>] __do_page_cache_readahead+0x1bc/0x260 [<c108f2b8>] ra_submit+0x28/0x40 [<c1087e3e>] filemap_fault+0x40e/0x420 [<c109b5fd>] __do_fault+0x3d/0x430 [<c109d47e>] handle_mm_fault+0x12e/0x790 [<c1022a65>] do_page_fault+0x135/0x330 [<c1403663>] error_code+0x6b/0x70 [<c10ef9ca>] load_elf_binary+0x82a/0x1a10 [<c10ba130>] search_binary_handler+0x90/0x1d0 [<c10bb70f>] do_execve+0x1df/0x250 [<c1001746>] sys_execve+0x46/0x70 [<c1002fa5>] syscall_call+0x7/0xb -> #2 (&mm->mmap_sem){++++++}: [<c105ea7f>] __lock_acquire+0x11ff/0x19e0 [<c105f2c8>] lock_acquire+0x68/0x90 [<c109b1ab>] might_fault+0x8b/0xb0 [<c11b8f52>] copy_to_user+0x32/0x70 [<c10c3b94>] filldir64+0xa4/0xf0 [<c1109116>] sysfs_readdir+0x116/0x210 [<c10c3e1d>] vfs_readdir+0x8d/0xb0 [<c10c3ea9>] sys_getdents64+0x69/0xb0 [<c1002ec4>] sysenter_do_call+0x12/0x32 -> #1 (sysfs_mutex){+.+.+.}: [<c105ea7f>] __lock_acquire+0x11ff/0x19e0 [<c105f2c8>] lock_acquire+0x68/0x90 [<c140199b>] mutex_lock_nested+0x5b/0x340 [<c110951c>] sysfs_addrm_start+0x2c/0xb0 [<c1109aa0>] create_dir+0x40/0x90 [<c1109b1b>] sysfs_create_dir+0x2b/0x50 [<c11b2352>] kobject_add_internal+0xc2/0x1b0 [<c11b2531>] kobject_add_varg+0x31/0x50 [<c11b25ac>] kobject_add+0x2c/0x60 [<c1258294>] device_add+0x94/0x560 [<c11036ea>] add_partition+0x18a/0x2a0 [<c110418a>] rescan_partitions+0x33a/0x450 [<c10de5bf>] __blkdev_get+0x12f/0x2d0 [<c10de76a>] blkdev_get+0xa/0x10 [<c11034b8>] register_disk+0x108/0x130 [<c11a87a9>] add_disk+0xd9/0x130 [<c12998e5>] sd_probe_async+0x105/0x1d0 [<c10528af>] async_thread+0xcf/0x230 [<c104bfd4>] kthread+0x74/0x80 [<c1003aab>] kernel_thread_helper+0x7/0x3c -> #0 (&bdev->bd_mutex){+.+.+.}: [<c105f176>] __lock_acquire+0x18f6/0x19e0 [<c105f2c8>] lock_acquire+0x68/0x90 [<c140199b>] mutex_lock_nested+0x5b/0x340 [<c10de2c2>] __blkdev_put+0x22/0x160 [<c10de40a>] blkdev_put+0xa/0x10 [<c113ce22>] free_journal_ram+0xd2/0x130 [<c113ea18>] do_journal_release+0x98/0x190 [<c113eb2a>] journal_release+0xa/0x10 [<c1128eb6>] reiserfs_put_super+0x36/0x130 [<c10b776f>] generic_shutdown_super+0x4f/0xe0 [<c10b7825>] kill_block_super+0x25/0x40 [<c11255df>] reiserfs_kill_sb+0x7f/0x90 [<c10b7f4a>] deactivate_super+0x7a/0x90 [<c10cccd8>] mntput_no_expire+0x98/0xd0 [<c10ccfcc>] sys_umount+0x4c/0x310 [<c10cd2a9>] sys_oldumount+0x19/0x20 [<c1002ec4>] sysenter_do_call+0x12/0x32 other info that might help us debug this: 2 locks held by umount/3904: #0: (&type->s_umount_key#30){+++++.}, at: [<c10b7f45>] deactivate_super+0x75/0x90 #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c1143279>] reiserfs_write_lock+0x29/0x40 stack backtrace: Pid: 3904, comm: umount Not tainted 2.6.32-atom #172 Call Trace: [<c13ff903>] ? printk+0x18/0x1a [<c105d33a>] print_circular_bug+0xca/0xd0 [<c105f176>] __lock_acquire+0x18f6/0x19e0 [<c108b66f>] ? free_pcppages_bulk+0x1f/0x250 [<c105f2c8>] lock_acquire+0x68/0x90 [<c10de2c2>] ? __blkdev_put+0x22/0x160 [<c10de2c2>] ? __blkdev_put+0x22/0x160 [<c140199b>] mutex_lock_nested+0x5b/0x340 [<c10de2c2>] ? __blkdev_put+0x22/0x160 [<c105c932>] ? mark_held_locks+0x62/0x80 [<c10afe12>] ? kfree+0x92/0xd0 [<c10de2c2>] __blkdev_put+0x22/0x160 [<c105cc3b>] ? trace_hardirqs_on+0xb/0x10 [<c10de40a>] blkdev_put+0xa/0x10 [<c113ce22>] free_journal_ram+0xd2/0x130 [<c113ea18>] do_journal_release+0x98/0x190 [<c113eb2a>] journal_release+0xa/0x10 [<c1128eb6>] reiserfs_put_super+0x36/0x130 [<c1050596>] ? up_write+0x16/0x30 [<c10b776f>] generic_shutdown_super+0x4f/0xe0 [<c10b7825>] kill_block_super+0x25/0x40 [<c10f41e0>] ? vfs_quota_off+0x0/0x20 [<c11255df>] reiserfs_kill_sb+0x7f/0x90 [<c10b7f4a>] deactivate_super+0x7a/0x90 [<c10cccd8>] mntput_no_expire+0x98/0xd0 [<c10ccfcc>] sys_umount+0x4c/0x310 [<c10cd2a9>] sys_oldumount+0x19/0x20 [<c1002ec4>] sysenter_do_call+0x12/0x32 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-12-29reiserfs: Fix remaining in-reclaim-fs <-> reclaim-fs-on locking inversionFrederic Weisbecker1-3/+12
Commit 500f5a0bf5f0624dae34307010e240ec090e4cde (reiserfs: Fix possible recursive lock) fixed a vmalloc under reiserfs lock that triggered a lockdep warning because of a IN-FS-RECLAIM <-> RECLAIM-FS-ON locking dependency inversion. But this patch has ommitted another vmalloc call in the same path that allocates the journal. Relax the lock for this one too. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-10-05kill-the-bkl/reiserfs: fix reiserfs lock to cpu_add_remove_lock dependencyFrederic Weisbecker1-1/+4
While creating the reiserfs workqueue during the journal initialization, we are holding the reiserfs lock, but create_workqueue() also holds the cpu_add_remove_lock, creating then the following dependency: - reiserfs lock -> cpu_add_remove_lock But we also have the following existing dependencies: - mm->mmap_sem -> reiserfs lock - cpu_add_remove_lock -> cpu_hotplug.lock -> slub_lock -> sysfs_mutex The merged dependency chain then becomes: - mm->mmap_sem -> reiserfs lock -> cpu_add_remove_lock -> cpu_hotplug.lock -> slub_lock -> sysfs_mutex But when we fill a dir entry in sysfs_readir(), we are holding the sysfs_mutex and we also might fault while copying the directory entry to the user, leading to the following dependency: - sysfs_mutex -> mm->mmap_sem The end result is then a lock inversion between sysfs_mutex and mm->mmap_sem, as reported in the following lockdep warning: [ INFO: possible circular locking dependency detected ] 2.6.31-07095-g25a3912 #4 ------------------------------------------------------- udevadm/790 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<c1098942>] might_fault+0x72/0xc0 but task is already holding lock: (sysfs_mutex){+.+.+.}, at: [<c110813c>] sysfs_readdir+0x7c/0x260 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (sysfs_mutex){+.+.+.}: [...] -> #4 (slub_lock){+++++.}: [...] -> #3 (cpu_hotplug.lock){+.+.+.}: [...] -> #2 (cpu_add_remove_lock){+.+.+.}: [...] -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [...] -> #0 (&mm->mmap_sem){++++++}: [...] This can be fixed by relaxing the reiserfs lock while creating the workqueue. This is fine to relax the lock here, we just keep it around to pass through reiserfs lock checks and for paranoid reasons. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: Laurent Riffard <laurent.riffard@free.fr>
2009-09-17kill-the-bkl/reiserfs: Fix induced mm->mmap_sem to sysfs_mutex dependencyFrederic Weisbecker1-0/+16
Alexander Beregalov reported the following warning: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-03149-gdcc030a #1 ------------------------------------------------------- udevadm/716 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<c107249a>] might_fault+0x4a/0xa0 but task is already holding lock: (sysfs_mutex){+.+.+.}, at: [<c10cb9aa>] sysfs_readdir+0x5a/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sysfs_mutex){+.+.+.}: [...] -> #2 (&bdev->bd_mutex){+.+.+.}: [...] -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [...] -> #0 (&mm->mmap_sem){++++++}: [...] On reiserfs mount path, we take the reiserfs lock and while initializing the journal, we open the device, taking the bdev->bd_mutex. Then rescan_partition() may signal the change to sysfs. We have then the following dependency: reiserfs_lock -> bd_mutex -> sysfs_mutex Later, while entering reiserfs_readpage() after a pagefault in an mmaped reiserfs file, we are holding the mm->mmap_sem, and we are going to take the reiserfs lock too. We have then the following dependency: mm->mmap_sem -> reiserfs_lock which, expanded with the previous dependency gives us: mm->mmap_sem -> reiserfs_lock -> bd_mutex -> sysfs_mutex Now while entering the sysfs readdir path, we are holding the sysfs_mutex. And when we copy a directory entry to the user buffer, we might fault and then take the mm->mmap_sem lock. Which leads to the circular locking dependency reported. We can fix that by relaxing the reiserfs lock during the call to journal_init_dev(), which is the place where we open the mounted device. This is fine to relax the lock here because we are in the begining of the reiserfs mount path and there is nothing to protect at this time, the journal is not intialized. We just keep this lock around for paranoid reasons. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: Laurent Riffard <laurent.riffard@free.fr>
2009-09-14kill-the-bkl/reiserfs: acquire the inode mutex safelyFrederic Weisbecker1-34/+0
While searching a pathname, an inode mutex can be acquired in do_lookup() which calls reiserfs_lookup() which in turn acquires the write lock. On the other side reiserfs_fill_super() can acquire the write_lock and then call reiserfs_lookup_privroot() which can acquire an inode mutex (the root of the mount point). So we theoretically risk an AB - BA lock inversion that could lead to a deadlock. As for other lock dependencies found since the bkl to mutex conversion, the fix is to use reiserfs_mutex_lock_safe() which drops the lock dependency to the write lock. [ Impact: fix a possible deadlock with reiserfs ] Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-09-14kill-the-bkl/reiserfs: use mutex_lock in reiserfs_mutex_lock_safeFrederic Weisbecker1-5/+3
reiserfs_mutex_lock_safe() is a hack to avoid any dependency between an internal reiserfs mutex and the write lock, it has been proposed to follow the old bkl logic. The code does the following: while (!mutex_trylock(m)) { reiserfs_write_unlock(s); schedule(); reiserfs_write_lock(s); } It then imitate the implicit behaviour of the lock when it was a Bkl and hadn't such dependency: mutex_lock(m) { if (fastpath) let's go else { wait_for_mutex() { schedule() { unlock_kernel() reacquire_lock_kernel() } } } } The problem is that by using such explicit schedule(), we don't benefit of the adaptive mutex spinning on owner. The logic in use now is: reiserfs_write_unlock(s); mutex_lock(m); // -> possible adaptive spinning reiserfs_write_lock(s); [ Impact: restore the use of adaptive spinning mutexes in reiserfs ] Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-09-14kill-the-BKL/reiserfs: release the write lock on flush_commit_list()Frederic Weisbecker1-2/+5
flush_commit_list() uses ll_rw_block() to commit the pending log blocks. ll_rw_block() might sleep, and the bkl was released at this point. Then we can also relax the write lock at this point. [ Impact: release the reiserfs write lock when it is not needed ] Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-09-14kill-the-BKL/reiserfs: release the write lock before rescheduling on ↵Frederic Weisbecker1-0/+2
do_journal_end() When do_journal_end() copies data to the journal blocks buffers in memory, it reschedules if needed between each block copied and dirtyfied. We can also release the write lock at this rescheduling stage, like did the bkl implicitly. [ Impact: release the reiserfs write lock when it is not needed ] Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-09-14reiserfs, kill-the-BKL: fix unsafe j_flush_mutex lockFrederic Weisbecker1-1/+1
Impact: fix a deadlock The j_flush_mutex is acquired safely in journal.c: if we can't take it, we free the reiserfs per superblock lock and wait a bit. But we have a remaining place in kupdate_transactions() where j_flush_mutex is still acquired traditionnaly. Thus the following scenario (warned by lockdep) can happen: A B mutex_lock(&write_lock) mutex_lock(&write_lock) mutex_lock(&j_flush_mutex) mutex_lock(&j_flush_mutex) //block mutex_unlock(&write_lock) sleep... mutex_lock(&write_lock) //deadlock Fix this by using reiserfs_mutex_lock_safe() in kupdate_transactions(). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@texware.it> Cc: Jeff Mahoney <jeffm@suse.com> LKML-Reference: <1239660635-12940-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 12:04:14 +0000