summaryrefslogtreecommitdiffstats
path: root/fs/quota/quota.c
AgeCommit message (Collapse)AuthorFilesLines
2018-04-02fs/quota: add kernel_quotactl() helper; remove in-kernel call to syscallDominik Brodowski1-2/+8
Using the fs-internal kernel_quotactl() helper allows us to get rid of the fs-internal call to the sys_quotactl() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2016-12-19Merge branch 'for_linus' of ↵Linus Torvalds1-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota, fsnotify and ext2 updates from Jan Kara: "Changes to locking of some quota operations from dedicated quota mutex to s_umount semaphore, a fsnotify fix and a simple ext2 fix" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix bogus warning in dquot_disable() fsnotify: Fix possible use-after-free in inode iteration on umount ext2: reject inodes with negative size quota: Remove dqonoff_mutex ocfs2: Use s_umount for quota recovery protection quota: Remove dqonoff_mutex from dquot_scan_active() ocfs2: Protect periodic quota syncing with s_umount semaphore quota: Use s_umount protection for quota operations quota: Hold s_umount in exclusive mode when enabling / disabling quotas fs: Provide function to get superblock with exclusive s_umount
2016-12-05quota: constify struct path in quota_onAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-24quota: Use s_umount protection for quota operationsJan Kara1-5/+1
Writeback quota is protected by s_umount semaphore held for reading because every writeback must be protected by that lock (grabbed either by the generic writeback code or by quotactl handler). Getting next available ID in quota file, querying quota state, setting quota information, getting quota format are all quotactl operations protected by s_umount semaphore held for reading grabbed in quotactl handler. This also fixes lockdep splat about possible deadlock during filesystem freezing where sync_filesystem() is called with page-faults already blocked but sync_filesystem() calls into dquot_writeback_dquots() which grabs dqonoff_mutex which ranks above i_mutex (vfs_load_quota_inode() grabs i_mutex under dqonoff_mutex) which clearly ranks below page fault freeze protection (e.g. via mmap_sem dependencies). The reported problem is not a real deadlock possibility since during quota on we check whether filesystem freezing is not in progress but still it is good to have this fixed. Reported-by: Ted Tso <tytso@mit.edu> Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-11-24quota: Hold s_umount in exclusive mode when enabling / disabling quotasJan Kara1-3/+13
Currently we hold s_umount semaphore only in shared mode when enabling or disabling quotas and use dqonoff_mutex for serializing quota state changes on a filesystem and also quota state changes with other places depending on current quota state. Using dedicated mutex for this causes possible deadlocks during filesystem freezing (see following commit for details) so we transition to using s_umount semaphore for the necessary synchronization whose lock ordering is properly handled by the filesystem freezing code. As a start grab s_umount in exclusive mode when enabling / disabling quotas. Signed-off-by: Jan Kara <jack@suse.cz>
2016-08-15quota: fill in Q_XGETQSTAT inode information for inactive quotasEric Sandeen1-6/+12
The manpage for quotactl says that the Q_XGETQSTAT command is "useful in finding out how much space is spent to store quota information," but the current implementation does not report this info if the inode is allocated, but its quota type is not enabled. This is a change from the earlier XFS implementation, which reported information about allocated quota inodes even if their quota type was not currently active. Change quota_getstate() and quota_getstatev() to copy out the inode information if the filesystem has provided it, even if the quota type for that inode is not currently active. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-07-05quota: Handle quota data stored in s_user_ns in quota_setxquotaEric W. Biederman1-1/+1
In Q_XSETQLIMIT use sb->s_user_ns to detect when we are dealing with the filesystems notion of id 0. Cc: Jan Kara <jack@suse.cz> Acked-by: Seth Forshee <seth.forshee@canonical.com> Inspired-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-07-05quota: Ensure qids map to the filesystemEric W. Biederman1-6/+6
Introduce the helper qid_has_mapping and use it to ensure that the quota system only considers qids that map to the filesystems s_user_ns. In practice for quota supporting filesystems today this is the exact same check as qid_valid. As only 0xffffffff aka (qid_t)-1 does not map into init_user_ns. Replace the qid_valid calls with qid_has_mapping as values come in from userspace. This is harmless today and it prepares the quota system to work on filesystems with quotas but mounted by unprivileged users. Call qid_has_mapping from dqget. This ensures the passed in qid has a prepresentation on the underlying filesystem. Previously this was unnecessary as filesystesm never had qids that could not map. With the introduction of filesystems outside of s_user_ns this will not remain true. All of this ensures the quota code never has to deal with qids that don't map to the underlying filesystem. Cc: Jan Kara <jack@suse.cz> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-02-18quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystemJan Kara1-2/+5
Commit 7955118eafc4 (quota: Allow Q_GETQUOTA for frozen filesystem) allowed Q_GETQUOTA call for frozen filesystem. It makes sense on the first look but zero-day testing has shown that with this change ext4 warns about starting a transaction for frozen filesystem. This happens because ext4_acquire_dquot() prepares for allocating space for new quota structure. Although it would be possible to implement Q_GETQUOTA for ext4 without allocating space for non-existent structures, the matter further complicates because OCFS2 needs to update on-disk structure use count when a new cluster node loads quota information from disk. So just revert the change and forbid Q_GETQUOTA together with Q_GETNEXTQUOTA for frozen filesystem. Add comment to quotactl_cmd_write() to save us from repeating this excercise in a few years when I forget again. Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09quota: Allow Q_GETQUOTA for frozen filesystemJan Kara1-0/+1
quota_cmd_write() forgot to list Q_GETQUOTA among commands allowed for frozen filesystem. Thus Q_GETQUOTA quotactl would unnecessarily block on frozen filesystems. Fix the issue by properly listing Q_GETQUOTA. Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09quota: Fixup comments about return value of Q_[X]GETNEXTQUOTAEric Sandeen1-2/+2
We actually return ENOENT, not ESRCH, when there is no structure with higher ID from ->get_nextdqblk. Fixup comments. Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-08quota: add new quotactl Q_GETNEXTQUOTAEric Sandeen1-0/+31
Q_GETNEXTQUOTA is exactly like Q_GETQUOTA, except that it will return quota information for the id equal to or greater than the id requested. In other words, if the requested id has no quota, the command will return quota information for the next higher id which does have a quota set. If no higher id has an active quota, -ESRCH is returned. This allows filesystems to do efficient iteration in kernelspace, much like extN filesystems do in userspace when asked to report all active quotas. This does require a new data structure for userspace, as the current structure does not include an ID for the returned quota information. Today, Ext4 with a hidden quota inode requires getpwent-style iterations, and for systems which have i.e. LDAP backends, this can be very slow, or even impossible if iteration is not allowed in the configuration. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08quota: add new quotactl Q_XGETNEXTQUOTAEric Sandeen1-0/+31
Q_XGETNEXTQUOTA is exactly like Q_XGETQUOTA, except that it will return quota information for the id equal to or greater than the id requested. In other words, if the requested id has no quota, the command will return quota information for the next higher id which does have a quota set. If no higher id has an active quota, -ESRCH is returned. This allows filesystems to do efficient iteration in kernelspace, much like extN filesystems do in userspace when asked to report all active quotas. The patch adds a d_id field to struct qc_dqblk so that we can pass back the id of the quota which was found, and return it to userspace. Today, filesystems such as XFS require getpwent-style iterations, and for systems which have i.e. LDAP backends, this can be very slow, or even impossible if iteration is not allowed in the configuration. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08quota: remove unused cmd argument from quota_quotaon()Eric Sandeen1-2/+2
The cmd argument to quota_quotaon() via Q_QUOTAON quotactl is not used, so remove it. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-11quota: remove an unneeded conditionDan Carpenter1-2/+2
We know "ret" is zero here so we can remove this condition. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.com>
2015-03-04quota: Hook up Q_XSETQLIM for id 0 to ->set_infoJan Kara1-0/+39
Setting timers or warning counts for id 0 via Q_XSETQLIM is used to actually set time limits and warning limits for all users. Hook up ->set_info to this so that VFS quota time limits get set the same way as XFS ones. When doing this Q_XSETQLIM for XFS is effectively split into two independent transactions - one for setting timers and warning limits and one for setting space and inode limits. Although this is inefficient, it is rare enough that it does not matter. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-04quota: Make ->set_info use structure with neccesary info to VFS and XFSJan Kara1-1/+20
Change ->set_info to take new qc_info structure which contains all the necessary information both for XFS and VFS. Convert Q_SETINFO handler to use this structure. Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-04quota: Remove ->get_xstate and ->get_xstatev callbacksJan Kara1-10/+4
These callbacks are now unused. Remove them. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-04quota: Wire up Q_GETXSTATE and Q_GETXSTATV calls to work with ->get_stateJan Kara1-4/+134
Add appropriate conversion functions so that filesystems supporting ->get_state() method can be queried using Q_GETXSTATE and Q_GETXSTATV calls. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-04quota: Make VFS quotas use new interface for getting quota infoJan Kara1-4/+21
Create new internal interface for getting information about quota which contains everything needed for both VFS quotas and XFS quotas. Make VFS use this and hook it up to Q_GETINFO. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-30quota: Remove quota_on_meta callbackJan Kara1-4/+1
There are no more users for quota_on_meta callback. Just remove it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-30quota: Wire up ->quota_{enable,disable} callbacks into Q_QUOTA{ON,OFF}Jan Kara1-4/+27
Make Q_QUOTAON / Q_QUOTAOFF quotactl call ->quota_enable / ->quota_disable callback when provided. To match current behavior of ocfs2 & ext4 we make these quotactls turn on / off quota enforcement for appropriate quota type. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-30quota: Split ->set_xstate callback into twoJan Kara1-4/+16
Split ->set_xstate callback into two callbacks - one for turning quotas on (->quota_enable) and one for turning quotas off (->quota_disable). That way we don't have to pass quotactl command into the callback which seems cleaner. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-28quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space unitsJan Kara1-25/+137
Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-10quota: Allow each filesystem to specify which quota types it supportsJan Kara1-2/+11
Currently all filesystems supporting VFS quota support user and group quotas. With introduction of project quotas this is going to change so make sure filesystem isn't called for quota type it doesn't support by introduction of a bitmask determining which quota types each filesystem supports. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: protect Q_GETFMT by dqonoff_mutexNiu Yawei1-3/+3
dqptr_sem will go away. Protect Q_GETFMT quotactl by dqonoff_mutex instead. This is also enough to make sure quota info will not go away while we are looking at it. Signed-off-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-05xfs: fix Q_XQUOTARM ioctlEric Sandeen1-1/+13
The Q_XQUOTARM quotactl was not working properly, because we weren't passing around proper flags. The xfs_fs_set_xstate() ioctl handler used the same flags for Q_XQUOTAON/OFF as well as for Q_XQUOTARM, but Q_XQUOTAON/OFF look for XFS_UQUOTA_ACCT, XFS_UQUOTA_ENFD, XFS_GQUOTA_ACCT etc, i.e. quota type + state, while Q_XQUOTARM looks only for the type of quota, i.e. XFS_DQ_USER, XFS_DQ_GROUP etc. Unfortunately these flag spaces overlap a bit, so we got semi-random results for Q_XQUOTARM; i.e. the value for XFS_DQ_USER == XFS_UQUOTA_ACCT, etc. yeargh. Add a new quotactl op vector specifically for the QUOTARM operation, since it operates with a different flag space. This has been broken more or less forever, AFAICT. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-11-04quota: info leak in quota_getquota()Dan Carpenter1-0/+1
The if_dqblk struct has a 4 byte hole at the end of the struct so uninitialized stack information is leaked to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-08-20quota: Add a new quotactl command Q_XGETQSTATVChandra Seetharaman1-0/+29
XFS now supports three types of quotas (user, group and project). Current version of Q_XGETSTAT has support for only two types of quotas. In order to support three types of quotas, the interface, specifically struct fs_quota_stat, need to be expanded. Current version of fs_quota_stat does not allow expansion without breaking backward compatibility. So, a quotactl command and new fs_quota_stat structure need to be added. This patch adds a new command Q_XGETQSTATV to quotactl() which takes a new data structure fs_quota_statv. This new data structure provides support for future expansion and backward compatibility. Callers of the new quotactl command have to set the version of the data structure being passed, and kernel will fill as much data as requested. If the kernel does not support the user-space provided version, EINVAL will be returned. User-space can reduce the version number and call the same quotactl again. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> [v2: Applied rjohnston's suggestions as per Chandra's request. -bpm]
2012-12-13quota: Use the pre-processor to compile out quotactl_cmd_write when ↵Lee Jones1-0/+4
!CONFIG_BLOCK quotactl_cmd_write() is only ever invoked when BLOCK is configured. When !CONFIG_BLOCK, the build warning below is displayed. Let's fix that. fs/quota/quota.c:311:12: warning: ‘quotactl_cmd_write’ defined but not used [-Wunused-function] Cc: Jan Kara <jack@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-12vfs: define struct filename and have getname() return itJeff Layton1-2/+2
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-18userns: Convert qutoactlEric W. Biederman1-6/+22
Update the quotactl user space interface to successfull compile with user namespaces support enabled and to hand off quota identifiers to lower layers of the kernel in struct kqid instead of type and qid pairs. The quota on function is not converted because while it takes a quota type and an id. The id is the on disk quota format to use, which is something completely different. The signature of two struct quotactl_ops methods were changed to take struct kqid argumetns get_dqblk and set_dqblk. The dquot, xfs, and ocfs2 implementations of get_dqblk and set_dqblk are minimally changed so that the code continues to work with the change in parameter type. This is the first in a series of changes to always store quota identifiers in the kernel in struct kqid and only use raw type and qid values when interacting with on disk structures or userspace. Always using struct kqid internally makes it hard to miss places that need conversion to or from the kernel internal values. Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-07-24Merge branch 'for_linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara: "Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs. I'm on vacation and scarcely checking email since we are expecting baby any day now but these fixes should be safe to go in and I don't want to delay them unnecessarily." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: avoid info leak on export isofs: avoid info leak on export udf: Improve table length check to avoid possible overflow ext3: Check return value of blkdev_issue_flush() jbd: Check return value of blkdev_issue_flush() udf: Do not decrement i_blocks when freeing indirect extent block udf: Fix memory leak when mounting ext2: cleanup the confused goto label UDF: Remove unnecessary variable "offset" from udf_fill_inode udf: stop using s_dirt ext3: force ro mount if ext3_setup_super() fails quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>
2012-07-22quota: Split dquot_quota_sync() to writeback and cache flushing partJan Kara1-2/+2
Split off part of dquot_quota_sync() which writes dquots into a quota file to a separate function. In the next patch we will use the function from filesystems and we do not want to abuse ->quota_sync quotactl callback more than necessary. Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-09quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with ↵Jeff Liu1-1/+1
<linux/uaccess.h> checkpatch.pl warns: "WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>" Below patch fixes it. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-03-23Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-2/+1
Pull XFS updates from Ben Myers: "Scalability improvements for dquots, log grant code cleanups, plus bugfixes and cleanups large and small" Fix up various trivial conflicts that were due to some of the earlier patches already having been integrated into v3.3 as bugfixes, and then there were development patches on top of those. Easily merged by just taking the newer version from the pulled branch. * 'for-linus' of git://oss.sgi.com/xfs/xfs: (45 commits) xfs: fallback to vmalloc for large buffers in xfs_getbmap xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get xfs: remove remaining scraps of struct xfs_iomap xfs: fix inode lookup race xfs: clean up minor sparse warnings xfs: remove the global xfs_Gqm structure xfs: remove the per-filesystem list of dquots xfs: use per-filesystem radix trees for dquot lookup xfs: per-filesystem dquot LRU lists xfs: use common code for quota statistics xfs: reimplement fdatasync support xfs: split in-core and on-disk inode log item fields xfs: make xfs_inode_item_size idempotent xfs: log timestamp updates xfs: log file size updates at I/O completion time xfs: log file size updates as part of unwritten extent conversion xfs: do not require an ioend for new EOF calculation xfs: use per-filesystem I/O completion workqueues quota: make Q_XQUOTASYNC a noop xfs: include reservations in quota reporting ...
2012-02-29quota: make Q_XQUOTASYNC a noopChristoph Hellwig1-2/+1
Now that XFS takes quota reservations into account there is no need to flush anything before reporting quotas - in addition to beeing fully transactional all quota information is also 100% coherent with the rest of the filesystem now. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-13quota: Fix deadlock with suspend and quotasJan Kara1-3/+21
This script causes a kernel deadlock: set -e DEVICE=/dev/vg1/linear lvchange -ay $DEVICE mkfs.ext3 $DEVICE mount -t ext3 -o usrquota,grpquota $DEVICE /mnt/test quotacheck -gu /mnt/test umount /mnt/test mount -t ext3 -o usrquota,grpquota $DEVICE /mnt/test quotaon /mnt/test dmsetup suspend $DEVICE setquota -u root 1 2 3 4 /mnt/test & sleep 1 dmsetup resume $DEVICE setquota acquired semaphore s_umount for read and then tried to perform a transaction (and waits because the device is suspended). dmsetup resume tries to acquire s_umount for write before resuming the device (and waits for setquota). Fix the deadlock by grabbing a thawed superblock for quota commands which need it. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03fs: move code out of buffer.cAl Viro1-1/+0
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-06Merge branch 'writeback-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Add a 'reason' to wb_writeback_work writeback: send work item to queue_io, move_expired_inodes writeback: trace event balance_dirty_pages writeback: trace event bdi_dirty_ratelimit writeback: fix ppc compile warnings on do_div(long long, unsigned long) writeback: per-bdi background threshold writeback: dirty position control - bdi reserve area writeback: control dirty pause time writeback: limit max dirty pause time writeback: IO-less balance_dirty_pages() writeback: per task dirty rate limit writeback: stabilize bdi->dirty_ratelimit writeback: dirty rate control writeback: add bg_threshold parameter to __bdi_update_bandwidth() writeback: dirty position control writeback: account per-bdi accumulated dirtied pages
2011-11-02Merge branch 'for_linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Cleanup metadata flags handling udf: Skip mirror metadata FE loading when metadata FE is ok ext3: Allow quota file use root reservation udf: Remove web reference from UDF MAINTAINERS entry quota: Drop path reference on error exit from quotactl udf: Neaten udf_debug uses udf: Neaten logging output, use vsprintf extension %pV udf: Convert printks to pr_<level> udf: Rename udf_warning to udf_warn udf: Rename udf_error to udf_err udf: Promote some debugging messages to udf_error ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY. udf: Add readpages support for udf. ext3/balloc.c: local functions should be static ext2: fix the outdated comment in ext2_nfs_get_inode() ext3: remove deprecated oldalloc fs/ext3/balloc.c: delete useless initialization fs/ext2/balloc.c: delete useless initialization ext3: fix message in ext3_remount for rw-remount case ext3: Remove i_mutex from ext3_sync_file() Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h
2011-10-31quota: Drop path reference on error exit from quotactlJan Kara1-2/+5
One error exit from quotactl forgot to do path_put(). Fix that. Reported-by: Valerie Aurora <val@vaaconsulting.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31writeback: Add a 'reason' to wb_writeback_workCurt Wohlgemuth1-1/+1
This creates a new 'reason' field in a wb_writeback_work structure, which unambiguously identifies who initiates writeback activity. A 'wb_reason' enumeration has been added to writeback.h, to enumerate the possible reasons. The 'writeback_work_class' and tracepoint event class and 'writeback_queue_io' tracepoints are updated to include the symbolic 'reason' in all trace events. And the 'writeback_inodes_sbXXX' family of routines has had a wb_stats parameter added to them, so callers can specify why writeback is being started. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-09-26VFS: Fix the remaining automounter semantics regressionsTrond Myklebust1-1/+1
The concensus seems to be that system calls such as stat() etc should not trigger an automount. Neither should the l* versions. This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups that _should_ trigger an automount on the last path element. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> [ Edited to leave out the cases that are already covered by LOOKUP_OPEN, LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally force automounting for their own reasons - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-12quota: Fix deadlock during path resolutionJan Kara1-14/+27
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl is prone to deadlocks. We hold s_umount semaphore for reading during the path resolution and resolution itself may need to acquire the semaphore for writing when e. g. autofs mountpoint is passed. Solve the problem by performing the resolution before we get hold of the superblock (and thus s_umount semaphore). The whole thing is complicated by the fact that some filesystems (OCFS2) ignore the path argument. So to distinguish between filesystem which want the path and which do not we introduce new .quota_on_meta callback which does not get the path. OCFS2 then uses this callback instead of old .quota_on. CC: Al Viro <viro@ZenIV.linux.org.uk> CC: Christoph Hellwig <hch@lst.de> CC: Ted Ts'o <tytso@mit.edu> CC: Joel Becker <joel.becker@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: drop remount argument to ->quota_on and ->quota_offChristoph Hellwig1-2/+2
Remount handling has fully moved into the filesystem, so all this is superflous now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21new helper: iterate_supers()Al Viro1-24/+9
... and switch the simple "loop over superblocks and do something" loops to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21Bury __put_super_and_need_restart()Al Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>