Age | Commit message (Collapse) | Author | Files | Lines |
|
In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.
Reported-by: Cengiz Can <cengiz@kernel.wtf>
Link: https://lore.kernel.org/lkml/d4ec59002ede4aaf9928c7f7526da87c@kernel.wtf
Fixes: 8df955a32a73 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The ram_core.c routines treat przs as circular buffers. When writing a
new crash dump, the old buffer needs to be cleared so that the new dump
doesn't end up in the wrong place (i.e. at the end).
The solution to this problem is to reset the circular buffer state before
writing a new Oops dump.
Signed-off-by: Aleksandr Yashkin <a.yashkin@inango-systems.com>
Signed-off-by: Nikolay Merinov <n.merinov@inango-systems.com>
Signed-off-by: Ariel Gilman <a.gilman@inango-systems.com>
Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com
Fixes: 896fc1f0c4c6 ("pstore/ram: Switch to persistent_ram routines")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
For callers that allocated a label for persistent_ram_new(), if the call
fails, they must clean up the allocation.
Suggested-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Fixes: 1227daa43bce ("pstore/ram: Clarify resource reservation labels")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20191211191353.14385-1-navid.emamdoost@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Leaving granularity at 1ns because it is dependent on the specific
attached backing pstore module. ramoops has microsecond resolution.
Fix the readback of ramoops fractional timestamp microseconds,
which has incorrectly been reporting the value as nanoseconds.
Fixes: 3f8f80f0cfeb ("pstore/ram: Read and write to the 'compressed' flag of pstore").
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: anton@enomsg.org
Cc: ccross@android.com
Cc: keescook@chromium.org
Cc: tony.luck@intel.com
|
|
When you try to run an upstream kernel on an old ARM-based Chromebook
you'll find that console-ramoops doesn't work.
Old ARM-based Chromebooks, before <https://crrev.com/c/439792>
("ramoops: support upstream {console,pmsg,ftrace}-size properties")
used to create a "ramoops" node at the top level that looked like:
/ {
ramoops {
compatible = "ramoops";
reg = <...>;
record-size = <...>;
dump-oops;
};
};
...and these Chromebooks assumed that the downstream kernel would make
console_size / pmsg_size match the record size. The above ramoops
node was added by the firmware so it's not easy to make any changes.
Let's match the expected behavior, but only for those using the old
backward-compatible way of working where ramoops is right under the
root node.
NOTE: if there are some out-of-tree devices that had ramoops at the
top level, left everything but the record size as 0, and somehow
doesn't want this behavior, we can try to add more conditions here.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 246 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ram pstore backend has always had the crash dumper frontend enabled
unconditionally. However, it was possible to effectively disable it
by setting a record_size=0. All the machinery would run (storing dumps
to the temporary crash buffer), but 0 bytes would ultimately get stored
due to there being no przs allocated for dumps. Commit 89d328f637b9
("pstore/ram: Correctly calculate usable PRZ bytes"), however, assumed
that there would always be at least one allocated dprz for calculating
the size of the temporary crash buffer. This was, of course, not the
case when record_size=0, and would lead to a NULL deref trying to find
the dprz buffer size:
BUG: unable to handle kernel NULL pointer dereference at (null)
...
IP: ramoops_probe+0x285/0x37e (fs/pstore/ram.c:808)
cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
Instead, we need to only enable the frontends based on the success of the
prz initialization and only take the needed actions when those zones are
available. (This also fixes a possible error in detecting if the ftrace
frontend should be enabled.)
Reported-and-tested-by: Yaro Slav <yaro330@gmail.com>
Fixes: 89d328f637b9 ("pstore/ram: Correctly calculate usable PRZ bytes")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since the header is a fixed small maximum size, just use a stack variable
to avoid memory allocation in the write path.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
If zero-length header happened in ramoops_write_kmsg_hdr(), that means
we will not be able to read back dmesg record later, since it will be
treated as invalid header in ramoops_pstore_read(). So we should not
execute the following code but return the error.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since only one single ramoops area allowed at a time, other probes
(like device tree) are meaningless, as it will waste CPU resources.
So let's check for being already initialized first.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Sometimes pstore_console_write() will write records with zero size
to persistent ram zone, which is unnecessary. It will only increase
resource consumption. Also adjust ramoops_write_kmsg_hdr() to have
same logic if memory allocation fails.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In ramoops_register_dummy() dummy_data is allocated via kzalloc()
then it will always occupy the heap space after register platform
device via platform_device_register_data(), but it will not be
used any more. So let's free it for system usage, replace it with
stack memory is better due to small size.
Signed-off-by: Yue Hu <huyue2@yulong.com>
[kees: add required memset and adjust sizeof() argument]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Yue Hu noticed that when parsing device tree the allocated platform data
was never freed. Since it's not used beyond the function scope, this
switches to using a stack variable instead.
Reported-by: Yue Hu <huyue2@yulong.com>
Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
commit b05c950698fe ("pstore/ram: Simplify ramoops_get_next_prz()
arguments") changed update assignment in getting next persistent ram zone
by adding a check for record type. But the check always returns true since
the record type is assigned 0. And this breaks console ramoops by showing
current console log instead of previous log on warm reset and hard reset
(actually hard reset should not be showing any logs).
Fix this by having persistent ram zone type check instead of record type
check. Tested this on SDM845 MTP and dragonboard 410c.
Reproducing this issue is simple as below:
1. Trigger hard reset and mount pstore. Will see console-ramoops
record in the mounted location which is the current log.
2. Trigger warm reset and mount pstore. Will see the current
console-ramoops record instead of previous record.
Fixes: b05c950698fe ("pstore/ram: Simplify ramoops_get_next_prz() arguments")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[kees: dropped local variable usage]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Given corruption in the ftrace records, it might be possible to allocate
tmp_prz without assigning prz to it, but still marking it as needing to
be freed, which would cause at least a NULL dereference.
smatch warnings:
fs/pstore/ram.c:340 ramoops_pstore_read() error: we previously assumed 'prz' could be null (see line 255)
https://lists.01.org/pipermail/kbuild-all/2018-December/055528.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 2fbea82bbb89 ("pstore: Merge per-CPU ftrace records into one")
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39fee ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
(1) remove type argument from ramoops_get_next_prz()
Since we store the type of the prz when we initialize it, we no longer
need to pass it again in ramoops_get_next_prz() since we can just use
that to setup the pstore record. So lets remove it from the argument list.
(2) remove max argument from ramoops_get_next_prz()
Looking at the code flow, the 'max' checks are already being done on
the prz passed to ramoops_get_next_prz(). Lets remove it to simplify
this function and reduce its arguments.
(3) further reduce ramoops_get_next_prz() arguments by passing record
Both the id and type fields of a pstore_record are set by
ramoops_get_next_prz(). So we can just pass a pointer to the pstore_record
instead of passing individual elements. This results in cleaner more
readable code and fewer lines.
In addition lets also remove the 'update' argument since we can detect
that. Changes are squashed into a single patch to reduce fixup conflicts.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In later patches we will need to map types to names, so create a
constant table for that which can also be used in different parts of
old and new code. This saves the type in the PRZ which will be useful
in later patches.
Instead of having an explicit PSTORE_TYPE_UNKNOWN, just use ..._MAX.
This includes removing the now redundant filename templates which can use
a single format string. Also, there's no reason to limit the "is it still
compressed?" test to only PSTORE_TYPE_DMESG when building the pstorefs
filename. Records are zero-initialized, so a backend would need to have
explicitly set compressed=1.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to more easily perform automated regression testing, this
adds pr_debug() calls to report each prz allocation which can then be
verified against persistent storage. Specifically, seeing the dividing
line between header, data, any ECC bytes. (And the general assignment
output is updated to remove the bogus ECC blocksize which isn't actually
recorded outside the prz instance.)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When initialing a prz, if invalid data is found (no PERSISTENT_RAM_SIG),
the function call path looks like this:
ramoops_init_prz ->
persistent_ram_new -> persistent_ram_post_init -> persistent_ram_zap
persistent_ram_zap
As we can see, persistent_ram_zap() is called twice.
We can avoid this by adding an option to persistent_ram_new(), and
only call persistent_ram_zap() when it is needed.
Signed-off-by: Peng Wang <wangpeng15@xiaomi.com>
[kees: minor tweak to exit path and commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
|
The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db3321 ("pstore: Convert console
write to use ->write_buf")
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"pstore improvements:
- refactor init to happen as early as possible again (Joel Fernandes)
- improve resource reservation names"
* tag 'pstore-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Clarify resource reservation labels
pstore: Refactor compression initialization
pstore: Allocate compression during late_initcall()
pstore: Centralize init/exit routines
|
|
When ramoops reserved a memory region in the kernel, it had an unhelpful
label of "persistent_memory". When reading /proc/iomem, it would be
repeated many times, did not hint that it was ramoops in particular,
and didn't clarify very much about what each was used for:
400000000-407ffffff : Persistent Memory (legacy)
400000000-400000fff : persistent_memory
400001000-400001fff : persistent_memory
...
4000ff000-4000fffff : persistent_memory
Instead, this adds meaningful labels for how the various regions are
being used:
400000000-407ffffff : Persistent Memory (legacy)
400000000-400000fff : ramoops:dump(0/252)
400001000-400001fff : ramoops:dump(1/252)
...
4000fc000-4000fcfff : ramoops:dump(252/252)
4000fd000-4000fdfff : ramoops:console
4000fe000-4000fe3ff : ramoops:ftrace(0/3)
4000fe400-4000fe7ff : ramoops:ftrace(1/3)
4000fe800-4000febff : ramoops:ftrace(2/3)
4000fec00-4000fefff : ramoops:ftrace(3/3)
4000ff000-4000fffff : ramoops:pmsg
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
|
|
ramoops's call of pstore_register() was recently moved to run during
late_initcall() because the crypto backend may not have been ready during
postcore_initcall(). This meant early-boot crash dumps were not getting
caught by pstore any more.
Instead, lets allow calls to pstore_register() earlier, and once crypto
is ready we can initialize the compression.
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: cb3bee0369bc ("pstore: Use crypto compress API")
[kees: trivial rebase]
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
|
|
As reported by nixiaoming, with some minor clarifications:
1) memory leak in ramoops_register_dummy():
dummy_data = kzalloc(sizeof(*dummy_data), GFP_KERNEL);
but no kfree() if platform_device_register_data() fails.
2) memory leak in ramoops_init():
Missing platform_device_unregister(dummy) and kfree(dummy_data)
if platform_driver_register(&ramoops_driver) fails.
I've clarified the purpose of ramoops_register_dummy(), and added a
common cleanup routine for all three failure paths to call.
Reported-by: nixiaoming <nixiaoming@huawei.com>
Cc: stable@vger.kernel.org
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The pstore conversion to timespec64 introduces its own method of passing
seconds into sscanf() and sprintf() type functions to work around the
timespec64 definition on 64-bit systems that redefine it to 'timespec'.
That hack is now finally getting removed, but that means we get a (harmless)
warning once both patches are merged:
fs/pstore/ram.c: In function 'ramoops_read_kmsg_hdr':
fs/pstore/ram.c:39:29: error: format '%ld' expects argument of type 'long int *', but argument 3 has type 'time64_t *' {aka 'long long int *'} [-Werror=format=]
#define RAMOOPS_KERNMSG_HDR "===="
^~~~~~
fs/pstore/ram.c:167:21: note: in expansion of macro 'RAMOOPS_KERNMSG_HDR'
This removes the pstore specific workaround and uses the same method that
we have in place for all other functions that print a timespec64.
Related to this, I found that the kasprintf() output contains an incorrect
nanosecond values for any number starting with zeroes, and I adapt the
format string accordingly.
Link: https://lkml.org/lkml/2018/5/19/115
Link: https://lkml.org/lkml/2018/5/16/1080
Fixes: 0f0d83b99ef7 ("pstore: Convert internal records to timespec64")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This prepares pstore for converting the VFS layer to timespec64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
|
|
In the pstore compression part, we use zlib/lzo/lz4/lz4hc/842
compression algorithm API to implement pstore compression backends. But
there are many repeat codes in these implementations. This patch uses
crypto compress API to simplify these codes.
1) rewrite allocate_buf_for_compression, free_buf_for_compression,
pstore_compress, pstore_decompress functions using crypto compress API.
2) drop compress, decompress, allocate, free functions in pstore_zbackend,
and add zbufsize function to get each different compress buffer size.
3) use late_initcall to call ramoops_init later, to make sure the crypto
subsystem has already initialized.
4) use 'unsigned int' type instead of 'size_t' in pstore_compress,
pstore_decompress functions' length arguments.
5) rename 'zlib' to 'deflate' to follow the crypto API's name convention.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
[kees: tweaked error messages on allocation failures and Kconfig help]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The current time will be initially available in the record->time field
for all pstore_read() and pstore_write() calls. Backends can either
update the field during read(), or use the field during write() instead
of fetching time themselves.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
|
|
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in fs/pstore/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
cc: Anton Vorontsov <anton@enomsg.org>
cc: Colin Cross <ccross@android.com>
cc: Tony Luck <tony.luck@intel.com>
|
|
Now that write() and write_buf() are functionally identical, this removes
write_buf(), and renames write_buf_user() to write_user(). Additionally
adds sanity-checks for pstore_info's declared functions and flags at
registration time.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Removes argument list in favor of pstore record, though the user buffer
remains passed separately since it must carry the __user annotation.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
As with the other API updates, this removes the long argument list in favor
of passing a single pstore recaord.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This removes the argument list for the erase() callback and replaces it
with a pointer to the backend record details to be removed.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The argument list for the pstore_read() interface is unwieldy. This changes
passes the new struct pstore_record instead. The erst backend was already
doing something similar internally.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Instead of needing additional checks in callers for unallocated przs,
perform the check in the walker, which gives us a more universal way to
handle the situation.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any
ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this
entire FTRACE section if there's no 'fprzs'.
Regression seen on a coreboot/depthcharge-based Chromebook.
Fixes: 2fbea82bbb89 ("pstore: Merge per-CPU ftrace records into one")
Cc: Joel Fernandes <joelaf@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This adds a check for a NULL platform data, which should only be possible
if a driver incorrectly sets up a probe request without also having defined
the platform_data structure. This is based on a patch from Geliang Tang.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since "przs" (persistent ram zones) is a general name in the code now, so
rename the Oops-dump zones to dprzs from przs.
Based on a patch from Nobuhiro Iwamatsu.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When setting ramoops record sizes, sometimes it's not clear which
parameters contributed to the allocation failure. This adds a per-zone
name and expands the failure reports.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Up until this patch, each of the per CPU ftrace buffers appear as a
separate ftrace-ramoops-N file. In this patch we merge all the zones into
one and populate a single ftrace-ramoops-0 file.
Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: clarified variables names, added -ENOMEM handling]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
If the RAMOOPS_FLAG_FTRACE_PER_CPU flag is passed to ramoops pdata, split
the ftrace space into multiple zones depending on the number of CPUs.
This speeds up the performance of function tracing by about 280% in my
tests as we avoid the locking. The trade off being lesser space available
per CPU. Let the ramoops user decide which option they want based on pdata
flag.
Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: added max_ftrace_cnt to track size, added DT logic and docs]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Currently ramoops_init_przs() is hard wired only for panic dump zone
array. In preparation for the ftrace zone array (one zone per-cpu) and pmsg
zone array, make the function more generic to be able to handle this case.
Heavily based on similar work from Joel Fernandes.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation of not locking at all for certain buffers depending on if
there's contention, make locking optional depending on the initialization
of the prz.
Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: moved locking flag into prz instead of via caller arguments]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
PMSG now uses ramoops_pstore_write_buf_user() instead of ...write_buf().
Print a ratelimited warning if gets accidentally called.
Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: adjusted commit log and added -EINVAL return]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
If cxt->pstore.buf allocated failed, no need to initialize
cxt->pstore.buf_lock. So this patch moves spin_lock_init() after the
error checking.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Removing a bounce buffer copy operation in the pmsg driver path is
always better. We also gain in overall performance by not requesting
a vmalloc on every write as this can cause precious RT tasks, such
as user facing media operation, to stall while memory is being
reclaimed. Added a write_buf_user to the pstore functions, a backup
platform write_buf_user that uses the small buffer that is part of
the instance, and implemented a ramoops write_buf_user that only
supports PSTORE_TYPE_PMSG.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|