summaryrefslogtreecommitdiffstats
path: root/fs/partitions
AgeCommit message (Collapse)AuthorFilesLines
2009-07-12partitions: fix broken uevent_suppress conversionHeiko Carstens1-1/+1
git commit f67f129e "Driver core: implement uevent suppress in kobject" contains this chunk for fs/partitions/check.c: /* suppress uevent if the disk supresses it */ - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(pdev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); However that should have been - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(ddev)) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ming Lei <tom.leiming@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12Merge branch 'for-2.6.31' of ↵Linus Torvalds1-10/+32
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ...
2009-06-07partitions: add ->set_capacity block device methodBartlomiej Zolnierkiewicz1-11/+32
* Add ->set_capacity block device method and use it in rescan_partitions() to attempt enabling native capacity of the device upon detecting the partition which exceeds device capacity. * Add GENHD_FL_NATIVE_CAPACITY flag to try limit attempts of enabling native capacity during partition scan. Together with the consecutive patch implementing ->set_capacity method in ide-gd device driver this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock <hancockrwd@gmail.com> Cc: Frans Pop <elendil@planet.nl> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Emphatically-Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07partitions: warn about the partition exceeding device capacityBartlomiej Zolnierkiewicz1-1/+2
The current warning message says only about the kernel's action taken without mentioning the underlying reason behind it. Noticed-by: Robert Hancock <hancockrwd@gmail.com> Cc: Frans Pop <elendil@planet.nl> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl> Cc: Al Viro <viro@zeniv.linux.org.uk> Emphatically-Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22block: Export I/O topology for block devices and partitionsMartin K. Petersen1-0/+10
To support devices with physical block sizes bigger than 512 bytes we need to ensure proper alignment. This patch adds support for exposing I/O topology characteristics as devices are stacked. logical_block_size is the smallest unit the device can address. physical_block_size indicates the smallest I/O the device can write without incurring a read-modify-write penalty. The io_min parameter is the smallest preferred I/O size reported by the device. In many cases this is the same as the physical block size. However, the io_min parameter can be scaled up when stacking (RAID5 chunk size > physical block size). The io_opt characteristic indicates the optimal I/O size reported by the device. This is usually the stripe width for arrays. The alignment_offset parameter indicates the number of bytes the start of the device/partition is offset from the device's natural alignment. Partition tools and MD/DM utilities can use this to pad their offsets so filesystems start on proper boundaries. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22block: Do away with the notion of hardsect_sizeMartin K. Petersen2-3/+3
Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar1-0/+4
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-03-26Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds1-30/+71
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits) [S390] remove duplicated #includes [S390] cpumask: use mm_cpumask() wrapper [S390] cpumask: Use accessors code. [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits. [S390] cpumask: remove cpu_coregroup_map [S390] fix clock comparator save area usage [S390] Add hwcap flag for the etf3 enhancement facility [S390] Ensure that ipl panic notifier is called late. [S390] fix dfp elf hwcap/facility bit detection [S390] smp: perform initial cpu reset before starting a cpu [S390] smp: fix memory leak on __cpu_up [S390] ipl: Improve checking logic and remove switch defaults. [S390] s390dbf: Remove needless check for NULL pointer. [S390] s390dbf: Remove redundant initilizations. [S390] use kzfree() [S390] BUG to BUG_ON changes [S390] zfcpdump: Prevent zcore from beeing built as a kernel module. [S390] Use csum_partial in checksum.h [S390] cleanup lowcore.h [S390] eliminate ipl_device from lowcore ...
2009-03-26[S390] dasd: add large volume supportStefan Weinhuber1-30/+71
The dasd device driver will now support ECKD devices with more then 65520 cylinders. In the traditional ECKD adressing scheme each track is addressed by a 16-bit cylinder and 16-bit head number. The new addressing scheme makes use of the fact that the actual number of heads is never larger then 15, so 12 bits of the head number can be redefined to be part of the cylinder address. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-24Driver core: implement uevent suppress in kobjectMing Lei1-5/+5
This patch implements uevent suppress in kobject and removes it from struct device, based on the following ideas: 1,Uevent sending should be one attribute of kobject, so suppressing it in kobject layer is more natural than in device layer. By this way, we can do it for other objects embedded with kobject. 2,It may save several bytes for each instance of struct device.(On my omap3(32bit ARM) based box, can save 8bytes per device object) This patch also introduces dev_set|get_uevent_suppress() helpers to set and query uevent_suppress attribute in case to help kobject as private part of struct device in future. [This version is against the latest driver-core patch set of Greg,please ignore the last version.] Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-26tracing/blktrace: fix up checkpatch reported problems in ftrace plugin patchArnaldo Carvalho de Melo1-4/+1
Also make sure sparse (make C=2 block/blktrace.o) is happy too. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26blktrace: add ftrace pluginArnaldo Carvalho de Melo1-0/+7
Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09block: fix bug in ptbl lookup cacheNeil Brown1-0/+1
Neil writes: Hi Jens, I've found a little bug for you. It was introduced by a6f23657d3072bde6844055bbc2290e497f33fbc block: add one-hit cache for disk partition lookup and has the effect of killing my machine whenever I try to assemble an md array :-( One of the devices in the array has partitions, and mdadm always deletes partitions before putting a whole-device in an array (as it can cause confusion). The next IO to that device locks the machine. I don't really understand exactly why it locks up, but it happens in disk_map_sector_rcu(). This patch fixes it. Which is due to a missing clear of the (now) stale partition lookup data. So clear that when we delete a partition. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-06block: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-8/+3
Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-18block/md: fix md autodetectionTejun Heo1-1/+1
Block ext devt conversion missed md_autodetect_dev() call in rescan_partitions() leaving md autodetect unable to see partitions. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18block: make add_partition() return pointer to hd_structTejun Heo1-12/+13
Make add_partition() return pointer to the new hd_struct on success and ERR_PTR() value on failure. This change will be used to fix md autodetection bug. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18block: fix add_partition() error pathTejun Heo1-1/+3
Partition stats structure was not freed on devt allocation failure path. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-21[PATCH] sanitize blkdev_get() and friendsAl Viro1-1/+1
* get rid of fake struct file/struct dentry in __blkdev_get() * merge __blkdev_get() and do_open() * get rid of flags argument of blkdev_get() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] pass fmode_t to blkdev_put()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-17block: add partition attribute for partition numberTejun Heo1-0/+10
With extended devt, finding out the partition number becomes a bit more challenging as subtracting the minor number from that of the parent device doesn't work anymore. The only thing left is parsing the partition name which is brittle and not exactly universal (some have '-' between the device name and partition number while others don't). This patch introduced partition attribute which contains the partition number of the device. This should make finding partitions and its index easier. This problem and solution were suggested by H. Peter Anvin. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-16block: sanitize invalid partition table entriesKay Sievers1-2/+15
We currently follow blindly what the partition table lies about the disk, and let the kernel create block devices which can not be accessed. Trying to identify the device leads to kernel logs full of: sdb: rw=0, want=73392, limit=28800 attempt to access beyond end of device Here is an example of a broken partition table, where sda2 starts behind the end of the disk, and sdb3 is larger than the entire disk: Disk /dev/sdb: 14 MB, 14745600 bytes 1 heads, 29 sectors/track, 993 cylinders, total 28800 sectors Device Boot Start End Blocks Id System /dev/sdb1 29 7800 3886 83 Linux /dev/sdb2 37801 45601 3900+ 83 Linux /dev/sdb3 15602 73402 28900+ 83 Linux /dev/sdb4 23403 28796 2697 83 Linux The kernel creates these completely invalid devices, which can not be accessed, or may lead to other unpredictable failures: grep . /sys/class/block/sdb*/{start,size} /sys/class/block/sdb/size:28800 /sys/class/block/sdb1/start:29 /sys/class/block/sdb1/size:7772 /sys/class/block/sdb2/start:37801 /sys/class/block/sdb2/size:7801 /sys/class/block/sdb3/start:15602 /sys/class/block/sdb3/size:57801 /sys/class/block/sdb4/start:23403 /sys/class/block/sdb4/size:5394 With this patch, we ignore partitions which start behind the end of the disk, and limit partitions to the end of the disk if they pretend to be larger: grep . /sys/class/block/sdb*/{start,size} /sys/class/block/sdb/size:28800 /sys/class/block/sdb1/start:29 /sys/class/block/sdb1/size:7772 /sys/class/block/sdb3/start:15602 /sys/class/block/sdb3/size:13198 /sys/class/block/sdb4/start:23403 /sys/class/block/sdb4/size:5394 These warnings are printed to the kernel log: sdb: p2 ignored, start 37801 is behind the end of the disk sdb: p3 size 57801 limited to end of disk Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fs/partitions/acorn.c: remove dead codeAdrian Bunk1-10/+0
I missed this when I did the arm26 removal. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-09Check for device resize when rescanning partitionsAndrew Patterson1-1/+2
Check for device resize in the rescan_partitions() routine. If the device has been resized, the bdev size is set to match. The rescan_partitions() routine is called when opening the device and when calling the BLKRRPART ioctl. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: allow disk to have extended device numberTejun Heo1-0/+1
Now that disk and partition handlings are mostly unified, it's easy to allow disk to have extended device number. This patch makes add_disk() use extended device number if disk->minors is zero. Both sd and ide-disk are updated to use this. * sd_format_disk_name() is implemented which can generically determine the drive name. This removes disk number restriction stemming from limited device names. * If sd index goes over SD_MAX_DISKS (which can be increased now BTW), sd simply doesn't initialize minors letting block layer choose extended device number. * If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set minors to 0 and use extended device numbers. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: replace @ext_minors with GENHD_FL_EXT_DEVTTejun Heo1-3/+1
With previous changes, it's meaningless to limit the number of partitions. Replace @ext_minors with GENHD_FL_EXT_DEVT such that setting the flag allows the disk to have maximum number of allowed partitions (only limited by the number of entries in parsed_partitions as determined by MAX_PART constant). This kills not-too-pretty alloc_disk_ext[_node]() functions and makes @minors parameter to alloc_disk[_node]() unnecessary. The parameter is left alone to avoid disturbing the users. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: make partition array dynamicTejun Heo1-5/+26
disk->__part used to be statically allocated to the maximum possible number of partitions. This patch makes partition array allocation dynamic. The added overhead is minimal as only real change is one memory dereference changed to RCU one. This saves both a bit of memory and cpu cycles iterating through unoccupied slots and makes increasing partition limit easier. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: move stats from disk to part0Tejun Heo1-6/+6
Move stats related fields - stamp, in_flight, dkstats - from disk to part0 and unify stat handling such that... * part_stat_*() now updates part0 together if the specified partition is not part0. ie. part_stat_*() are now essentially all_stat_*(). * {disk|all}_stat_*() are gone. * part_round_stats() is updated similary. It handles part0 stats automatically and disk_round_stats() is killed. * part_{inc|dec}_in_fligh() is implemented which automatically updates part0 stats for parts other than part0. * disk_map_sector_rcu() is updated to return part0 if no part matches. Combined with the above changes, this makes NULL special case handling in callers unnecessary. * Separate stats show code paths for disk are collapsed into part stats show code paths. * Rename disk_stat_lock/unlock() to part_stat_lock/unlock() While at it, reposition stat handling macros a bit and add missing parentheses around macro parameters. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: kill GENHD_FL_FAIL and use part0->make_it_failTejun Heo1-5/+5
GENHD_FL_FAIL for disk is what make_it_fail is for parts. Kill it and use part0->make_it_fail. Sysfs node handling is unified too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: always set bdev->bd_partTejun Heo1-6/+1
Till now, bdev->bd_part is set only if the bdev was for parts other than part0. This patch makes bdev->bd_part always set so that code paths don't have to differenciate common handling. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: move holder_dir from disk to part0Tejun Heo1-12/+3
Move disk->holder_dir to part0->holder_dir. Kill now mostly superflous bdev_get_holder(). While at it, kill superflous kobject_get/put() around holder_dir, slave_dir and cmd_filter creation and collapse disk_sysfs_add_subdirs() into register_disk(). These serve no purpose but obfuscating the code. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: move policy from disk to part0Tejun Heo1-1/+1
Move disk->policy to part0->policy. Implement and use get_disk_ro(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: unify sysfs size node handlingTejun Heo1-2/+2
Now that capacity and __dev are moved to part0, part0 and others can share the same method. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: move capacity from disk to part0Tejun Heo1-1/+1
Move disk->capacity to part0->nr_sects and convert all users who directly accessed the field to use {get|set}_capacity(). This is done early to allow the __dev field to be moved. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: introduce partition 0Tejun Heo1-6/+6
genhd and partition code handled disk and partitions separately. All information about the whole disk was in struct genhd and partitions in struct hd_struct. However, the whole disk (part0) and other partitions have a lot in common and the data structures end up having good number of common fields and thus separate code paths doing the same thing. Also, the partition array was indexed by partno - 1 which gets pretty confusing at times. This patch introduces partition 0 and makes the partition array indexed by partno. Following patches will unify the handling of disk and parts piece-by-piece. This patch also implements disk_partitionable() which tests whether a disk is partitionable. With coming dynamic partition array change, the most common usage of disk_max_parts() will be testing whether a disk is partitionable and the number of max partitions will become much less important. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: implement and use {disk|part}_to_dev()Tejun Heo1-37/+42
Implement {disk|part}_to_dev() and use them to access generic device instead of directly dereferencing {disk|part}->dev. To make sure no user is left behind, rename generic devices fields to __dev. This is in preparation of unifying partition 0 handling with other partitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: implement extended dev numbersTejun Heo1-1/+8
Implement extended device numbers. A block driver can tell block layer that it wants to use extended device numbers. After the usual minor space is used up, block layer automatically allocates devt's from EXT_BLOCK_MAJOR. Currently only one major number is allocated for this but as the allocation is strictly on-demand, ~1mil minor space under it should suffice unless the system actually has more than ~1mil partitions and if that ever happens adding more majors to the extended devt area is easy. Due to internal implementation issues, the first partition can't be allocated on the extended area. In other words, genhd->minors should at least be 1. This limitation will be lifted by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: fix diskstats accessTejun Heo1-3/+4
There are two variants of stat functions - ones prefixed with double underbars which don't care about preemption and ones without which disable preemption before manipulating per-cpu counters. It's unclear whether the underbarred ones assume that preemtion is disabled on entry as some callers don't do that. This patch unifies diskstats access by implementing disk_stat_lock() and disk_stat_unlock() which take care of both RCU (for partition access) and preemption (for per-cpu counter access). diskstats access should always be enclosed between the two functions. As such, there's no need for the versions which disables preemption. They're removed and double underbars ones are renamed to drop the underbars. As an extra argument is added, there's no danger of using the old version unconverted. disk_stat_lock() uses get_cpu() and returns the cpu index and all diskstat functions which access per-cpu counters now has @cpu argument to help RT. This change adds RCU or preemption operations at some places but also collapses several preemption ops into one at others. Overall, the performance difference should be negligible as all involved ops are very lightweight per-cpu ones. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: fix disk->part[] dereferencing raceTejun Heo1-25/+45
disk->part[] is protected by its matching bdev's lock. However, non-critical accesses like collecting stats and printing out sysfs and proc information used to be performed without any locking. As partitions can come and go dynamically, partitions can go away underneath those non-critical accesses. As some of those accesses are writes, this theoretically can lead to silent corruption. This patch fixes the race by using RCU for the partition array and dev reference counter to hold partitions. * Rename disk->part[] to disk->__part[] to make sure no one outside genhd layer proper accesses it directly. * Use RCU for disk->__part[] dereferencing. * Implement disk_{get|put}_part() which can be used to get and put partitions from gendisk respectively. * Iterators are implemented to help iterate through all partitions safely. * Functions which require RCU readlock are marked with _rcu suffix. * Use disk_put_part() in __blkdev_put() instead of directly putting the contained kobject. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: don't depend on consecutive minor spaceTejun Heo1-8/+11
* Implement disk_devt() and part_devt() and use them to directly access devt instead of computing it from ->major and ->first_minor. Note that all references to ->major and ->first_minor outside of block layer is used to determine devt of the disk (the part0) and as ->major and ->first_minor will continue to represent devt for the disk, converting these users aren't strictly necessary. However, convert them for consistency. * Implement disk_max_parts() to avoid directly deferencing genhd->minors. * Update bdget_disk() such that it doesn't assume consecutive minor space. * Move devt computation from register_disk() to add_disk() and make it the only one (all other usages use the initially determined value). These changes clean up the code and will help disk->part dereference fix and extended block device numbers. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: make variable and argument names more consistentTejun Heo1-16/+17
In hd_struct, @partno is used to denote partition number and a number of other places use @part to denote hd_struct. Functions use @part and @index instead. This causes confusion and makes it difficult to use consistent variable names for hd_struct. Always use @partno if a variable represents partition number. Also, print out functions use @f or @part for seq_file argument. Use @seqf uniformly instead. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: update add_partition() error handlingTejun Heo1-19/+21
d805dda4 tried to fix error case handling in add_partition() but had a few problems. * disk->part[] entry is set early and left dangling if operation fails. * Once device initialized, the last put_device() is responsible for freeing all the resources. The failure path freed part_stats and p regardless of put_device() causing double free. * holders subdir holds reference to the disk device, so failure path should remove it to release resources properly which was missing. This patch fixes the above problems and while at it move partition slot busy check into add_partition() for completeness and inlines holders subdirectory creation. Using separate function for it just obfuscates the code. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Abdel Benamrouche <draconux@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: allow deleting zero length partitionTejun Heo1-2/+0
delete_partition() was noop for zero length partition. As the addition code allows creating zero lenght partition and deletion is assumed to always succeed, this causes memory leak for zero length partitions. Allow zero length partitions to end their meaningless lives. While at it, allow deleting zero lenght partition via BLKPG_DEL_PARTITION ioctl too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-13rescan_partitions(): make device capacity errors non-fatalAndrew Morton1-2/+2
Herton Krzesinski reports that the error-checking changes in 04ebd4aee52b06a2c38127d9208546e5b96f3a19 ("block/ioctl.c and fs/partition/check.c: check value returned by add_partition") cause his buggy USB camera to no longer mount. "The camera is an Olympus X-840. The original issue comes from the camera itself: its format program creates a partition with an off by one error". Buggy devices happen. It is better for the kernel to warn and to proceed with the mount. Reported-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Abdel Benamrouche <draconux@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fs/partitions/efi: convert to pr_debugThomas Gleixner1-25/+17
convert the local Dprintk() compile time debug printk wrappers to the generic pr_debug() wrapper. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25block/ioctl.c and fs/partition/check.c: check value returned by add_partition()Abdel Benamrouche1-2/+8
Now that add_partition() has been aught to propagate errors, let's check them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Abdel Benamrouche <draconux@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fs/partition/check.c: fix return value warningAbdel Benamrouche1-6/+22
fs/partitions/check.c:381: warning: ignoring return value of ___device_add___, declared with attribute warn_unused_result [akpm@linux-foundation.org: multiple-return-statements-per-function are evil] Signed-off-by: Abdel Benamrouche <draconux@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fs: ldm.[ch] use get_unaligned_* helpersHarvey Harrison2-40/+35
Replace the private BE16/BE32/BE64 macros with direct calls to get_unaligned_be16/32/64. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21driver core: remove KOBJ_NAME_LEN defineKay Sievers1-1/+1
Kobjects do not have a limit in name size since a while, so stop pretending that they do. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30fs: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-4/+4
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fat: detect media without partition table correctlyFrank Seidel1-3/+17
I received a complaint that some FAT formated medias (e.g. sd memory cards) trigger a "unknown partition table" message even though there is no partition table and they work correctly, while in general (when e.g. formated with mkdosfs or even Windows Vista) this message is not shown. Currently this seems only to happen when the medias get formatted with Windows XP (and possibly Win 2000). Then the boot indicator byte contains garbage (part of text message) and so do the other parts checked by msdos_paritition which then later triggers this message. References: novell bug #364365 Most fat formatted media without partition table contains zeros in the boot indication and the other tested bytes and so falls through the checks in msdos_partition, leading it to return with 1 (all is fine). But some (e.g. WinXP formatted) fat fomated medias don't use boot_ind and so the check fails and causes a "unkown partition table" warning eventhough there is none and everything would be fine. This additional check directly verifies if there is a fat formatted medium without a partition table. Signed-off-by: Frank Seidel <fseidel@suse.de> Cc: Andreas Dilger <adilger@sun.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>